Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
Hersteller-Teilenummer: TSC-EM2LB3-16
Marke: MISUMI
Preis: 26.81 €
Lieferzeit: 5 Arbeitstage
Outer Diameter (D): 3 φ
Flute Length (ℓ): 4.5 mm
Shank Diameter (d): 6 mm
Overall Length (L): 70 mm
Length Under Neck (ℓ1): 16 mm
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
TSC-EM2LB3-16
Teilenummer
|
---|
TSC-EM2LB3-16 |
Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
26.81 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 16 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 16.75 | 17.58 | 19.53 | 21.97 | 10° |
Loading...
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
1 | No Standards | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
1 | ● | ● | 1.05 | 1.10 | 1.22 | 1.37 | ||||||||
1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | No Standards | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
4 | No Standards | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | ● | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
2 | 6 | 6 | ● | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
3 | - | 4 | ● | ● | 10° | 3.14 | 3.30 | 3.66 | 4.12 | |||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.10 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.20 | 2.44 | 2.75 | ||||||||
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.10 | 6.87 | |||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
3 | No Standards | ● | 3.14 | 3.30 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.20 | 2.44 | 2.75 | 1 |
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.60 | ||||||||
1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.30 | 3.66 | 4.12 | 1 |
4 | ● | ● | 4.19 | 4.40 | 4.88 | 5.49 | ||||||||
5 | No Standards | ● | 5.24 | 5.49 | 6.10 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.40 | 12.27 | |||||
12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)
Outer Diameter D |
Length Under Neck ℓ1 |
Shank Diameter d |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Under Neck Angle θ |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | 10° | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference |
[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).
Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)
Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
1.5 | 8 ~ 20 | 4 | ● | ● | 3 | 1.45 | 40 | 3 |
1.6 | 9 ~ 20 | 4 | ● | ● | 3.2 | 1.55 | 40 | 3 |
1.8 | 9 ~ 20 | 4 | ● | ● | 3.6 | 1.75 | 40 | 3 |
2 | 9 ~ 21 | 4 | ● | ● | 4 | 1.95 | 40 | 3 |
2.5 | 10 ~ 22 | 4 | ● | ● | 5 | 2.4 | 40 | 3 |
3 | 11 ~ 21 | 6 | ● | ● | 6 | 2.9 | 45 | 3 |
4 | 13 ~ 23 | 6 | ● | ● | 8 | 3.8 | 45 | 3 |
5 | 15 ~ 25 | 6 | ● | ● | 10 | 4.8 | 45 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Tolerance of OD(mm) | 0 ~ -0.02 |
Sie befinden sich auf der Seite für TSC series carbide long neck square end mill, 2-flute / long neck model, die Teilenummer ist TSC-EM2LB3-16.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer TSC-EM2LB3-16.
Konfigurieren
Basiseigenschaften
Processing Applications
Ausführung
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Length Under Neck (ℓ1)(mm)
Geometry
Torsion Angle (θ)
Additional Classification
Filtern nach vsl. Lieferzeit
Optionale Eigenschaften
Teilenummer |
---|
TSC-EM2LB0.3-2 |
TSC-EM2LB0.3-3 |
TSC-EM2LB0.3-4 |
TSC-EM2LB3-20 |
TSC-EM2LB3-25 |
TSC-EM2LB3-30 |
Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
34.46 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 2 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
37.44 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 3 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
50.46 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 4 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.28 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
26.03 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 20 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 20.94 | 21.98 | 24.41 | 27.46 | 10° | |
26.03 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 25 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 26.18 | 27.47 | 30.51 | Without Interference | 10° | |
29.79 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 70 | 30 | Inclined Cutting / Nut / Flat Surface / Side Surface | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 31.41 | 32.97 | 36.62 | Without Interference | 10° |