• Marken
  • Unternehmen
  • Kontakt
DE
TYPENCODE Suche | *NOT READY*
#CODE
Suchwort-Vorschlag
Vorgeschlagene Teilenummer
Auslaufprodukte

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-PEM2LB0.4-12)

TSC series carbide long neck square end mill, 2-flute / long neck model TSC-PEM2LB0.4-12

Klicken Sie auf dieses Bild, um es zu vergrößern.

Klicken Sie auf dieses Bild, um es zu vergrößern.

  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • Mengenrabatt

MISUMI

MISUMI

Produktdetails:

Hersteller-Teilenummer: TSC-PEM2LB0.4-12

Marke: MISUMI

Preis: 65.50 €

Lieferzeit: 5 Arbeitstage


Technische Daten:

Outer Diameter (D): 0.4 φ

Flute Length (ℓ): 0.6 mm

Shank Diameter (d): 4 mm

Overall Length (L): 50 mm

Length Under Neck (ℓ1): 12 mm


  • TS
  • General Steel
  • 2 Flutes

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

TSC-PEM2LB0.4-12

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Daten, die angezeigt werden sollen
30
45
60
  1. 1
Teilenummer
TSC-PEM2LB0.4-12
Teilenummer
Standard-Stückpreis
MindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm) 		Length Under Neck (θ)

65.50 €

1 Verfügbar 5 Arbeitstage 0.40.645012Flat Surface / Side Surface / Nut / Inclined CuttingSharp CornerStandard Helix (30 to 40°)Stocked Product1●0.3712.5713.1914.6516.4810°

Loading...

  1. 1

Spezifikationen

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.1 0.3 - 4 No Standards ● 0.2 0.085 50 10° 0.31 0.33 0.37 0.41 1
0.5 No Standards ● 0.52 0.55 0.61 0.69
1 No Standards ● 1.05 1.10 1.22 1.37
0.2 0.5 - 4 No Standards ● 0.3 0.18 50 10° 0.52 0.55 0.61 0.69 1
1 ● ● 1.05 1.10 1.22 1.37
1.5 ● ● 1.57 1.65 1.83 2.06
2 No Standards ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 No Standards ● 3.14 3.30 3.66 4.12
3.5 No Standards ● 3.66 3.85 4.27 4.81
4 No Standards ● 4.19 4.40 4.88 5.49
0.3 1 - 4 ● ● 0.45 0.28 50 10° 1.05 1.10 1.22 1.37 1
1.5 No Standards ● 1.57 1.65 1.83 2.06
2 ● ● 2.09 2.20 2.44 2.75
2.5 No Standards ● 2.62 2.75 3.05 3.43
3 ● ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 No Standards ● 6.28 6.59 7.32 8.24
9 No Standards ● 9.42 9.89 10.98 12.36
0.4 1 - 4 No Standards ● 0.6 0.37 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
2 6 6 ● ● 15° 2.06 2.13 2.28 2.45
3 - 4 ● ● 10° 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
5 ● ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 No Standards ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
0.5 1 - 4 No Standards ● 0.7 0.46 50 10° 1.05 1.10 1.22 1.37 1
2 ● ● 2.09 2.20 2.44 2.75
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
5 - 4 No Standards ● 10° 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
0.6 2 - 4 ● ● 0.9 0.56 50 10° 2.09 2.20 2.44 2.75 1
3 No Standards ● 3.14 3.30 3.66 4.12
4 ● ● 4.19 4.40 4.88 5.49
4 6 6 ● ● 15° 4.13 4.26 4.56 4.91
6 - 4 ● ● 10° 6.28 6.59 7.32 8.24
7 No Standards ● 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
15 ● ● 15.71 16.48 18.31 20.60
18 No Standards ● 70 18.85 19.78 21.97 24.71
0.7 2 - 4 ● ● 1.05 0.66 50 10° 2.09 2.20 2.44 2.75 1
4 ● ● 4.19 4.40 4.88 5.49
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
0.8 4 - 4 ● ● 1.2 0.76 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
20 No Standards ● 70 20.94 21.98 24.41 27.46
24 No Standards ● 25.13 26.38 29.29 Without Interference
0.9 4 - 4 No Standards ● 1.35 0.85 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
15 No Standards ● 15.71 16.48 18.31 20.60
1 3 - 4 No Standards ● 1.5 0.95 50 10° 3.14 3.30 3.66 4.12 1
4 ● ● 4.19 4.40 4.88 5.49
5 No Standards ● 5.24 5.49 6.10 6.87
6 ● ● 6.28 6.59 7.32 8.24
6 6 6 ● ● 15° 6.19 6.39 6.84 7.36
7 - 4 No Standards ● 10° 7.33 7.69 8.54 9.61
8 ● ● 8.38 8.79 9.76 10.98
9 No Standards ● 9.42 9.89 10.98 12.36
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
22 No Standards ● 23.04 24.18 26.85 Without Interference
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
1.2 6 - 4 ● ● 1.8 1.15 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
16 ● ● 16.75 17.58 19.53 21.97

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
1.4 6 - 4 No Standards ● 2.1 1.35 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
1.5 4 - 4 No Standards ● 2.3 1.45 50 10° 4.19 4.40 4.88 5.49 1
6 ● ● 6.28 6.59 7.32 8.24
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 ● ● 70 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
30 No Standards ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
1.6 6 - 4 No Standards ● 2.4 1.55 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 21.97
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
26 No Standards ● 27.22 28.57 31.73 Without Interference
1.8 6 - 4 No Standards ● 2.7 1.75 50 10° 6.28 6.59 7.32 8.24 1
8 No Standards ● 8.38 8.79 9.76 10.98
10 No Standards ● 10.47 10.99 12.21 13.73
12 No Standards ● 12.57 13.19 14.65 16.48
14 No Standards ● 14.66 15.39 17.09 19.22
16 No Standards ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 21.97 Without Interference
20 No Standards ● 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 30.51 Without Interference
2 6 - 4 ● ● 3 1.95 50 10° 6.28 6.59 7.32 8.24 1
8 ● ● 8.38 8.79 9.76 10.98
10 ● ● 10.47 10.99 12.21 13.73
10 6 6 ● ● 15° 10.31 10.65 11.40 12.27
12 - 4 ● ● 10° 12.57 13.19 14.65 16.48
14 ● ● 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 Without Interference
18 ● ● 70 18.85 19.78 21.97 Without Interference
20 ● ● 20.94 21.98 24.41 Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 No Standards ● 41.88 43.96 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
60 No Standards ● 62.83 Without Interference Without Interference Without Interference
2.5 8 - 4 ● ● 3.8 2.4 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 Without Interference
14 No Standards ● 14.66 15.39 17.09 Without Interference
16 ● ● 16.75 17.58 19.53 Without Interference
18 No Standards ● 70 18.85 19.78 Without Interference Without Interference
20 ● ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
40 No Standards ● 100 41.88 Without Interference Without Interference Without Interference
50 No Standards ● 52.35 Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter
D		 Length Under Neck
ℓ1		 Shank Diameter
d		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Under Neck Angle
θ		 Actual Effective Length Depends on Work Inclination Angle Figure
30' 1° 2° 3°
3 8 - 6 ● ● 4.5 2.9 50 10° 8.38 8.79 9.76 10.98 1
10 No Standards ● 10.47 10.99 12.21 13.73
12 ● ● 12.57 13.19 14.65 16.48
14 No Standards ● 70 14.66 15.39 17.09 19.22
16 ● ● 16.75 17.58 19.53 21.97
18 No Standards ● 18.85 19.78 21.97 24.71
20 ● ● 20.94 21.98 24.41 27.46
25 ● ● 26.18 27.47 30.51 Without Interference
30 ● ● 31.41 32.97 36.62 Without Interference
40 ● ● 100 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
4 12 - 6 ● ● 6 3.8 50 10° 12.57 13.19 14.65 16.48 1
16 ● ● 16.75 17.58 19.53 Without Interference
20 ● ● 70 20.94 21.98 24.41 Without Interference
25 No Standards ● 26.18 27.47 Without Interference Without Interference
30 ● ● 31.41 32.97 Without Interference Without Interference
35 No Standards ● 100 36.65 38.46 Without Interference Without Interference
40 ● ● 41.88 43.96 Without Interference Without Interference
45 No Standards ● 47.12 49.45 Without Interference Without Interference
50 No Standards ● 52.35 54.95 Without Interference Without Interference
5 16 - 6 ● ● 7.5 4.8 70 10° 16.75 17.58 Without Interference Without Interference 1
20 No Standards ● 20.94 21.98 Without Interference Without Interference
25 ● ● 26.18 27.47 Without Interference Without Interference
30 No Standards ● 31.41 Without Interference Without Interference Without Interference
35 ● ● 100 36.65 Without Interference Without Interference Without Interference
40 No Standards ● 41.88 Without Interference Without Interference Without Interference
50 ● ● 52.35 Without Interference Without Interference Without Interference
6 20 - 6 ● ● 9 5.8 70 10° Without Interference Without Interference Without Interference Without Interference 2
30 ● ● Without Interference Without Interference Without Interference Without Interference
40 ● ● 100 Without Interference Without Interference Without Interference Without Interference
50 ● ● Without Interference Without Interference Without Interference Without Interference
60 ● ● Without Interference Without Interference Without Interference Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

Outer Diameter
D		 Length Under Neck ℓ1
1 mm Increment Designation		 Shank Diameter
d		 Standard Sharp Edge Flute Length
ℓ		 Under Neck Diameter
d1		 Overall Length
L		 Figure
1.5 8 ~ 20 4 ● ● 3 1.45 40 3
1.6 9 ~ 20 4 ● ● 3.2 1.55 40 3
1.8 9 ~ 20 4 ● ● 3.6 1.75 40 3
2 9 ~ 21 4 ● ● 4 1.95 40 3
2.5 10 ~ 22 4 ● ● 5 2.4 40 3
3 11 ~ 21 6 ● ● 6 2.9 45 3
4 13 ~ 23 6 ● ● 8 3.8 45 3
5 15 ~ 25 6 ● ● 10 4.8 45 3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

Weitere Informationen


● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Grundlegende Informationen

Work Material General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy Number of Flutes(sheet) 2 Model Long Neck Square
Coating For High Hardness (Silicone-Based) Tolerance of OD(mm) 0 ~ -0.02

Sie befinden sich auf der Seite für TSC series carbide long neck square end mill, 2-flute / long neck model, die Teilenummer ist TSC-PEM2LB0.4-12.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer TSC-PEM2LB0.4-12.

Konfigurieren

Zurücksetzen

1Vorgeschlagene Teilenummer

Teilenummern anzeigen

Einige Spezifikationen sind bisher nicht festgelegt.
Die Teilenummer wurde erkannt.

Basiseigenschaften

  • Processing Applications

    • Flat Surface
    • Side Surface
    • Nut
    • Inclined Cutting
    • Countersunk

    Zurücksetzen

  • Ausführung

    • LN-TSC-EM2S
    • LN-TSC-PEM2S
    • TSC-EM2LB
    • TSC-PEM2LB

    Zurücksetzen

  • Outer Diameter (D)(φ)

    • 0.1
    • 0.2
    • 0.3
    • 0.4
    • 0.5
    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.2
    • 1.4
    • 1.5
    • 1.6
    • 1.8
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6

    Zurücksetzen

  • Flute Length (ℓ)(mm)

    • 0.2
    • 0.3
    • 0.45
    • 0.6
    • 0.7
    • 0.9
    • 1.05
    • 1.2
    • 1.35
    • 1.5
    • 1.8
    • 2.1
    • 2.3
    • 2.4
    • 2.7
    • 3
    • 3.2
    • 3.6
    • 3.8
    • 4
    • 4.5
    • 5
    • 6
    • 7.5
    • 8
    • 9
    • 10

    Zurücksetzen

  • Shank Diameter (d)(mm)

    • 4
    • 6

    Zurücksetzen

  • Overall Length (L)(mm)

    • 40
    • 45
    • 50
    • 70
    • 100

    Zurücksetzen

  • Length Under Neck (ℓ1)(mm)

    • 0.3
    • 0.5
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 24
    • 25
    • 26
    • 30
    • 35
    • 40
    • 45
    • 50
    • 60

     

    Zurücksetzen

  • Geometry

    • Sharp Corner
    • Mit Führung

    Zurücksetzen

  • Torsion Angle (θ)

    • Standard Helix (30 to 40°)
    • Powerful Helix (45° to 60°)

    Zurücksetzen

  • Additional Classification

    • Manufactured Product
    • Stocked Product

    Zurücksetzen

Filtern nach vsl. Lieferzeit

    • Alle Produkte
    • 5 Tage oder weniger
    • 8 Tage oder weniger

    Zurücksetzen

Optionale Eigenschaften

Produktvarianten

Teilenummer
TSC-EM2LB0.3-2
TSC-EM2LB0.3-3
TSC-EM2LB0.3-4
TSC-PEM2LB0.4-2
TSC-PEM2LB0.4-3
TSC-PEM2LB0.4-4
TeilenummerStandard-StückpreisMindestbestellmengeMengenrabattReguläre
Versanddauer
?		Outer Diameter (D)
(φ) 		Flute Length (ℓ)
(mm) 		Shank Diameter (d)
(mm) 		Overall Length (L)
(mm) 		Length Under Neck (ℓ1)
(mm) 		Processing Applications Geometry Torsion Angle (θ) Additional Classification Figure ● Inventory Product □ Manufacturer Product Under Neck Diameter d1
(mm) 		Actual Effective Length Depends on Work Inclination Angle 30'
(mm) 		Actual Effective Length Depends on Work Inclination Angle 1°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 2°
(mm) 		Actual Effective Length Depends on Work Inclination Angle 3°
(mm) 		Length Under Neck (θ)

28.54 €

1 Verfügbar 5 Arbeitstage 0.30.454502Inclined Cutting / Nut / Flat Surface / Side SurfaceMit FührungStandard Helix (30 to 40°)Stocked Product1●0.282.092.22.442.7510°

31.02 €

1 Verfügbar 5 Arbeitstage 0.30.454503Inclined Cutting / Nut / Flat Surface / Side SurfaceMit FührungStandard Helix (30 to 40°)Stocked Product1●0.283.143.33.664.1210°

41.80 €

1 Verfügbar 5 Arbeitstage 0.30.454504Inclined Cutting / Nut / Flat Surface / Side SurfaceMit FührungStandard Helix (30 to 40°)Stocked Product1●0.284.194.44.885.4910°

22.12 €

1 Verfügbar 5 Arbeitstage 0.40.64502Inclined Cutting / Nut / Flat Surface / Side SurfaceSharp CornerStandard Helix (30 to 40°)Stocked Product1●0.372.092.22.442.7510°

18.13 €

1 Verfügbar 5 Arbeitstage 0.40.64503Inclined Cutting / Nut / Flat Surface / Side SurfaceSharp CornerStandard Helix (30 to 40°)Stocked Product1●0.373.143.33.664.1210°

19.05 €

1 Verfügbar 5 Arbeitstage 0.40.64504Inclined Cutting / Nut / Flat Surface / Side SurfaceSharp CornerStandard Helix (30 to 40°)Stocked Product1●0.374.194.44.885.4910°

Technischer Support

Technische Anfrage

Bezahlverfahren

  • Rechnung
  • Vorauskasse
  • PayPal

On-Demand-Fertigung

Ansicht ändern

Zertifikate

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI weltweit

Social Media

Rechtliche Hinweise

Copyright © MISUMI Corporation All Rights Reserved.