XAL series carbide ball end mill, 2-flute / short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
- XAL
- General Steel
- 2 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
45.15 € | 1 | Verfügbar | 5 Arbeitstage | 0.05 | 0.2 | 40 | 3 | ±0.005 | 0.1 | 1 | - | |
28.69 € | 1 | Verfügbar | 5 Arbeitstage | 0.1 | 0.4 | 40 | 3 | ±0.005 | 0.2 | 1 | - | |
39.63 € | 1 | Verfügbar | 5 Arbeitstage | 0.1 | 0.4 | 50 | 6 | ±0.005 | 0.2 | 1 | - | |
19.72 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.8 | 50 | 4 | ±0.005 | 0.4 | 1 | 15° | |
27.34 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.8 | 50 | 6 | ±0.005 | 0.4 | 1 | - | |
16.23 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 1.2 | 50 | 4 | ±0.005 | 0.6 | 1 | 15° | |
25.50 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 1.2 | 50 | 6 | ±0.005 | 0.6 | 1 | - | |
16.67 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 2 | 50 | 4 | ±0.005 | 0.8 | 1 | 15° | |
25.49 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 1.6 | 50 | 6 | ±0.005 | 0.8 | 1 | - | |
15.96 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 2 | 50 | 4 | ±0.005 | 1 | 1 | 15° | |
20.16 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 2.5 | 60 | 6 | ±0.005 | 1 | 1 | 15° | |
19.56 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 3 | 50 | 4 | ±0.005 | 1.2 | 1 | 15° | |
23.02 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 2.8 | 40 | 4 | ±0.005 | 1.4 | 1 | - | |
22.57 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | 3 | 40 | 4 | ±0.005 | 1.6 | 1 | - | |
30.49 € | 1 | Verfügbar | 5 Arbeitstage | 0.9 | 3 | 40 | 4 | ±0.005 | 1.8 | 1 | - | |
29.01 € | 1 | Verfügbar | 5 Arbeitstage | 0.15 | 0.6 | 40 | 3 | ±0.005 | 0.3 | 1 | - | |
18.45 € | 1 | Verfügbar | 5 Arbeitstage | 0.25 | 1.1 | 50 | 4 | ±0.005 | 0.5 | 1 | 15° | |
34.69 € | 1 | Verfügbar | 5 Arbeitstage | 0.35 | 1.4 | 40 | 3 | ±0.005 | 0.7 | 1 | - | |
32.65 € | 1 | Verfügbar | 5 Arbeitstage | 0.45 | 1.8 | 40 | 3 | ±0.005 | 0.9 | 1 | - | |
44.18 € | 1 | Verfügbar | 5 Arbeitstage | 0.55 | 2.2 | 40 | 4 | ±0.005 | 1.1 | 1 | - | |
44.06 € | 1 | Verfügbar | 5 Arbeitstage | 0.65 | 2.6 | 40 | 4 | ±0.005 | 1.3 | 1 | - | |
17.04 € | 1 | Verfügbar | 5 Arbeitstage | 0.75 | 3 | 50 | 4 | ±0.005 | 1.5 | 1 | 15° | |
26.12 € | 1 | Verfügbar | 5 Arbeitstage | 0.75 | 3 | 50 | 6 | ±0.005 | 1.5 | 1 | - | |
26.83 € | 1 | Verfügbar | 5 Arbeitstage | 0.85 | 3 | 40 | 4 | ±0.005 | 1.7 | 1 | - | |
13.95 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 4 | 50 | 4 | ±0.005 | 2 | 1 | 15° | |
18.59 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 6 | 60 | 4 | ±0.005 | 2 | 1 | 15° | |
21.32 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 5 | 50 | 6 | ±0.005 | 2 | 1 | 15° | |
54.18 € | 1 | Verfügbar | 5 Arbeitstage | 1.05 | 3 | 40 | 4 | ±0.005 | 2.1 | 1 | - | |
49.49 € | 1 | Verfügbar | 5 Arbeitstage | 1.1 | 3 | 40 | 4 | ±0.005 | 2.2 | 1 | - | |
49.49 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 3 | 40 | 4 | ±0.005 | 2.4 | 1 | - | |
46.81 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 3.5 | 40 | 4 | ±0.005 | 2.6 | 1 | - | |
36.54 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 3.5 | 40 | 4 | ±0.005 | 2.8 | 1 | - | |
16.24 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 6 | 50 | 4 | ±0.005 | 3 | 1 | 15° | |
19.14 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 6 | 60 | 6 | ±0.005 | 3 | 1 | 15° | |
51.50 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 4 | 40 | 4 | ±0.005 | 3.2 | 1 | - | |
51.25 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 4 | 40 | 4 | ±0.005 | 3.4 | 1 | - | |
39.38 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 5 | 40 | 4 | ±0.005 | 3.6 | 1 | - | |
39.38 € | 1 | Verfügbar | 5 Arbeitstage | 1.9 | 5 | 40 | 4 | ±0.005 | 3.8 | 1 | - | |
49.49 € | 1 | Verfügbar | 5 Arbeitstage | 1.15 | 3 | 40 | 4 | ±0.005 | 2.3 | 1 | - | |
19.15 € | 1 | Verfügbar | 5 Arbeitstage | 1.25 | 6 | 50 | 4 | ±0.005 | 2.5 | 1 | 15° | |
49.37 € | 1 | Verfügbar | 5 Arbeitstage | 1.45 | 3.5 | 40 | 4 | ±0.005 | 2.9 | 1 | - | |
49.63 € | 1 | Verfügbar | 5 Arbeitstage | 1.55 | 4 | 40 | 4 | ±0.005 | 3.1 | 1 | - | |
42.35 € | 1 | Verfügbar | 5 Arbeitstage | 1.65 | 4 | 40 | 4 | ±0.005 | 3.3 | 1 | - | |
25.94 € | 1 | Verfügbar | 5 Arbeitstage | 1.75 | 5 | 40 | 4 | ±0.005 | 3.5 | 1 | - | |
17.55 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 8 | 50 | 4 | ±0.005 | 4 | 2 | - | |
20.62 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 8 | 70 | 6 | ±0.005 | 4 | 1 | 15° | |
62.82 € | 1 | Verfügbar | 5 Arbeitstage | 2.2 | 6 | 50 | 6 | ±0.005 | 4.4 | 1 | - | |
49.24 € | 1 | Verfügbar | 5 Arbeitstage | 2.3 | 6 | 50 | 6 | ±0.005 | 4.6 | 1 | - | |
53.65 € | 1 | Verfügbar | 5 Arbeitstage | 2.4 | 6 | 50 | 6 | ±0.005 | 4.8 | 1 | - | |
19.58 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 10 | 50 | 6 | ±0.005 | 5 | 1 | 15° | |
22.95 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 12 | 80 | 6 | ±0.005 | 5 | 1 | 15° | |
46.90 € | 1 | Verfügbar | 5 Arbeitstage | 2.6 | 8 | 50 | 6 | ±0.005 | 5.2 | 1 | - | |
55.75 € | 1 | Verfügbar | 5 Arbeitstage | 2.15 | 6 | 50 | 6 | ±0.005 | 4.3 | 1 | - | |
63.33 € | 1 | Verfügbar | 5 Arbeitstage | 2.75 | 8 | 50 | 6 | ±0.005 | 5.5 | 1 | - | |
17.99 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 12 | 90 | 6 | -0.007 ~ +0.003 | 6 | 2 | - | |
35.15 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 12 | 60 | 8 | -0.007 ~ +0.003 | 7 | 1 | - | |
27.88 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 14 | 100 | 8 | -0.007 ~ +0.003 | 8 | 2 | - | |
56.23 € | 1 | 5 Arbeitstage | 4.5 | 14 | 70 | 10 | -0.007 ~ +0.003 | 9 | 1 | - | ||
43.03 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 15 | 70 | 10 | -0.007 ~ +0.003 | 10 | 2 | - | |
45.98 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 18 | 100 | 10 | -0.007 ~ +0.003 | 10 | 2 | - |
Loading...
Spezifikationen
| Model Number | Shank Diameter d |
Overall Length L |
Outer Diameter D |
Flute Length ℓ |
Figure | |||
| Tip R |
Shank Diameter d |
Overall Length L |
||||||
| XAL-BEM2S | 0.05 | - | - | 3 | 40 | 0.1 | 0.2 | 1 |
| 0.1 | - | - | 3 | 40 | 0.2 | 0.4 | 1 | |
| 0.1 | 6 | - | 6 | 50 | 0.2 | 0.4 | 1 | |
| 0.15 | - | - | 3 | 40 | 0.3 | 0.6 | 1 | |
| 0.2 | - | - | 4 | 50 | 0.4 | 0.8 | 1 | |
| 0.2 | 6 | - | 6 | 50 | 0.4 | 0.8 | 1 | |
| 0.25 | - | - | 4 | 50 | 0.5 | 1.1 | 1 | |
| 0.3 | - | - | 4 | 50 | 0.6 | 1.2 | 1 | |
| 0.3 | 6 | - | 6 | 50 | 0.6 | 1.2 | 1 | |
| 0.35 | - | - | 3 | 40 | 0.7 | 1.4 | 1 | |
| 0.4 | - | - | 4 | 50 | 0.8 | 2 | 1 | |
| 0.4 | 6 | - | 6 | 50 | 0.8 | 1.6 | 1 | |
| 0.45 | - | - | 3 | 40 | 0.9 | 1.8 | 1 | |
| 0.5 | - | - | 4 | 50 | 1 | 2 | 1 | |
| 0.5 | 6 | - | 6 | 60 | 1 | 2.5 | 1 | |
| 0.55 | - | - | 4 | 40 | 1.1 | 2.2 | 1 | |
| 0.6 | - | - | 4 | 50 | 1.2 | 3 | 1 | |
| 0.65 | - | - | 4 | 40 | 1.3 | 2.6 | 1 | |
| 0.7 | - | - | 4 | 40 | 1.4 | 2.8 | 1 | |
| 0.75 | - | - | 4 | 50 | 1.5 | 3 | 1 | |
| 0.75 | 6 | - | 6 | 50 | 1.5 | 3 | 1 | |
| 0.8 | - | - | 4 | 40 | 1.6 | 3 | 1 | |
| 0.85 | - | - | 4 | 40 | 1.7 | 3 | 1 | |
| 0.9 | - | - | 4 | 40 | 1.8 | 3 | 1 | |
| 1 | - | - | 4 | 50 | 2 | 4 | 1 | |
| 1 | 6 | - | 6 | 50 | 2 | 5 | 1 | |
| 1 | 4 | 60 | 4 | 60 | 2 | 6 | 1 | |
| 1.05 | - | - | 4 | 40 | 2.1 | 3 | 1 | |
| 1.1 | - | - | 4 | 40 | 2.2 | 3 | 1 | |
| 1.15 | - | - | 4 | 40 | 2.3 | 3 | 1 | |
| 1.2 | - | - | 4 | 40 | 2.4 | 3 | 1 | |
| 1.25 | - | - | 4 | 50 | 2.5 | 6 | 1 |
[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).
| Model Number | Shank Diameter d |
Overall Length L |
Outer Diameter D |
Flute Length ℓ |
Figure | |||
| Tip R |
Shank Diameter d |
Overall Length L |
||||||
| XAL-BEM2S | 1.3 | - | - |
4 |
40 |
2.6 | 3.5 | 1 |
| 1.4 | - | - |
4 |
40 |
2.8 | 3.5 | 1 | |
| 1.45 | - | - |
4 |
40 |
2.9 | 3.5 | 1 | |
| 1.5 | - | - |
4 |
50 |
3 | 6 | 1 | |
| 1.5 | 6 |
60 |
6 |
60 |
3 | 6 | 1 | |
| 1.55 | - | - |
4 |
40 |
3.1 | 4 | 1 | |
| 1.6 | - | - |
4 |
40 |
3.2 | 4 | 1 | |
| 1.65 | - | - |
4 |
40 |
3.3 | 4 | 1 | |
| 1.7 | - | - |
4 |
40 |
3.4 | 4 | 1 | |
| 1.75 | - | - |
4 |
40 |
3.5 | 5 | 1 | |
| 1.8 | - | - |
4 |
40 |
3.6 | 5 | 1 | |
| 1.9 | - | - |
4 |
40 |
3.8 | 5 | 1 | |
| 2 | - | - |
4 |
50 |
4 | 8 | 2 | |
| 2 | 6 | - |
6 |
70 |
4 | 8 | 1 | |
| 2.15 | - | - |
6 |
50 |
4.3 | 6 | 1 | |
| 2.2 | - | - |
6 |
50 |
4.4 | 6 | 1 | |
| 2.3 | - | - |
6 |
50 |
4.6 | 6 | 1 | |
| 2.4 | - | - |
6 |
50 |
4.8 | 6 | 1 | |
| 2.5 | - | - |
6 |
50 |
5 | 10 | 1 | |
| 2.5 | 6 |
80 |
6 |
80 |
5 | 12 | 1 | |
| 2.6 | - | - |
6 |
50 |
5.2 | 8 | 1 | |
| 2.75 | - | - |
6 |
50 |
5.5 | 8 | 1 | |
| 3 | - | - |
6 |
90 |
6 | 12 | 2 | |
| 3.5 | - | - |
8 |
60 |
7 | 12 | 1 | |
| 4 | - | - |
8 |
100 |
8 | 14 | 2 | |
| 4.5 | - | - |
10 |
70 |
9 | 14 | 1 | |
| 5 | - | - |
10 |
70 |
10 | 15 | 2 | |
| 5 | 10 |
100 |
10 |
100 |
10 | 18 | 2 | |
| 5.5 | - | - |
12 |
80 |
11 | 15 | 1 | |
| 6 | - | - |
12 |
75 |
12 | 25 | 2 | |
| 6 | 12 |
110 |
12 |
110 |
12 | 25 | 2 | |
| 7 | - | - |
12 |
80 |
14 | 15 | 3 | |
| 8 | - | - |
16 |
140 |
16 | 30 | 2 | |
| 10 | - | - |
20 |
160 |
20 | 38 | 2 | |
[ ! ]For shank diameter (d) and overall length (L) specifications listed in blue, specify a tip (R), shank diameter (d) and overall length (L).
Weitere Informationen
● The XAL series exhibits stable wear-resistant performance when milling raw materials.
● It delivers high cost performance for pre-hardened steel, aluminum, and copper alloys.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.
Grundlegende Informationen
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminium / Kupfer / Kunststoff | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For General Steel (AlCrN etc.) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Inventory Classification | Stocked Product |
| Torsion Availability | Included |
Konfigurieren
Basiseigenschaften
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
R Precision(μm)
-
Ausführung
- XAL-BEM2S
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.