- Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 3:00 26/5/2024 bis 1:00 (CET) 27/5/2024 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.
TSC series carbide ball end mill, short model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Gutes Oberflächenfinish kann für die grobe Oberfläche des Werkstücks nach der Bearbeitung erwartet werden
Es hat eine Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte und erreicht eine lange Lebensdauer. Wirksam bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
-Kann nachgeschliffen werden. Bitte beachten Sie die Seite "Nachschleifservice" für Anwendungsprozeduren, Leistungsspektrum, Preise, etc.
- TS
- General Steel
- 2 Flutes
- S (Short)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Teilenummer
|
|---|
| SN-TSC-BEM2S3-[15-42/1]-10 |
| SN-TSC-BEM2S3.5-[17-36/1]-12 |
| SN-TSC-BEM2S4-[18-36/1]-13 |
| SN-TSC-BEM2S4.5-[19-40/1]-14 |
| SN-TSC-BEM2S5-[20-50/1]-15 |
| SN-TSC-BEM2S5.5-[20-50/1]-15 |
| SN-TSC-BEM2S6-[20-50/1]-15 |
| SNR-TSC-BEM2S3-[15-42/1]-[5-10/1] |
| SNR-TSC-BEM2S3.5-[17-36/1]-[5-12/1] |
| SNR-TSC-BEM2S4-[18-36/1]-[5-13/1] |
| SNR-TSC-BEM2S4.5-[19-40/1]-[5-14/1] |
| SNR-TSC-BEM2S5-[20-50/1]-[5-15/1] |
| SNR-TSC-BEM2S5.5-[20-50/1]-[5-15/1] |
| SNR-TSC-BEM2S6-[20-50/1]-[5-15/1] |
| TSC-BEM2S3 |
| TSC-BEM2S3.5 |
| TSC-BEM2S4 |
| TSC-BEM2S4.5 |
| TSC-BEM2S5 |
| TSC-BEM2S5.5 |
| TSC-BEM2S6 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Shank Diameter (d) (mm) | R Precision (μm) | Inventory Classification | Outer Diameter D (mm) | Figure | Length Under Neck (θ) (Degree) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 3 | 10 | 60 | 15 ～ 42 | 6 | -0.007 ~ +0.003 | Standard Neck Relief | 6 | 2 | - | ||
- | 1 | 8 Arbeitstage | 3.5 | 12 | 60 | 17 ～ 36 | 8 | -0.007 ~ +0.003 | Standard Neck Relief | 7 | 1 | 10° | ||
- | 1 | 8 Arbeitstage | 4 | 13 | 60 | 18 ～ 36 | 8 | -0.007 ~ +0.003 | Standard Neck Relief | 8 | 2 | - | ||
- | 1 | 8 Arbeitstage | 4.5 | 14 | 70 | 19 ～ 40 | 10 | -0.007 ~ +0.003 | Standard Neck Relief | 9 | 1 | 10° | ||
- | 1 | 8 Arbeitstage | 5 | 15 | 80 | 20 ～ 50 | 10 | -0.007 ~ +0.003 | Standard Neck Relief | 10 | 2 | - | ||
- | 1 | 8 Arbeitstage | 5.5 | 15 | 80 | 20 ～ 50 | 12 | -0.007 ~ +0.003 | Standard Neck Relief | 11 | 1 | 10° | ||
- | 1 | 8 Arbeitstage | 6 | 15 | 80 | 20 ～ 50 | 12 | -0.007 ~ +0.003 | Standard Neck Relief | 12 | 2 | - | ||
- | 1 | 7 Arbeitstage | 3 | 5 ～ 10 | 60 | 15 ～ 42 | 6 | -0.007 ~ +0.003 | Cutting Edge R Processing | 6 | 2 | - | ||
- | 1 | 7 Arbeitstage | 3.5 | 5 ～ 12 | 60 | 17 ～ 36 | 8 | -0.007 ~ +0.003 | Cutting Edge R Processing | 7 | 1 | 10° | ||
- | 1 | 7 Arbeitstage | 4 | 5 ～ 13 | 60 | 18 ～ 36 | 8 | -0.007 ~ +0.003 | Cutting Edge R Processing | 8 | 2 | - | ||
- | 1 | 7 Arbeitstage | 4.5 | 5 ～ 14 | 70 | 19 ～ 40 | 10 | -0.007 ~ +0.003 | Cutting Edge R Processing | 9 | 1 | 10° | ||
- | 1 | 7 Arbeitstage | 5 | 5 ～ 15 | 80 | 20 ～ 50 | 10 | -0.007 ~ +0.003 | Cutting Edge R Processing | 10 | 2 | - | ||
- | 1 | 7 Arbeitstage | 5.5 | 5 ～ 15 | 80 | 20 ～ 50 | 12 | -0.007 ~ +0.003 | Cutting Edge R Processing | 11 | 1 | 10° | ||
- | 1 | 7 Arbeitstage | 6 | 5 ～ 15 | 80 | 20 ～ 50 | 12 | -0.007 ~ +0.003 | Cutting Edge R Processing | 12 | 2 | - | ||
30.78 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 10 | 60 | - | 6 | -0.007 ~ +0.003 | Stocked Product | 6 | 2 | - | |
46.98 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | 12 | 60 | - | 8 | -0.007 ~ +0.003 | Stocked Product | 7 | 1 | 10° | |
52.15 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 13 | 60 | - | 8 | -0.007 ~ +0.003 | Stocked Product | 8 | 2 | - | |
79.98 € | 1 | Verfügbar | 5 Arbeitstage | 4.5 | 14 | 70 | - | 10 | -0.007 ~ +0.003 | Stocked Product | 9 | 1 | 10° | |
59.44 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 15 | 80 | - | 10 | -0.007 ~ +0.003 | Stocked Product | 10 | 2 | - | |
123.37 € | 1 | Verfügbar | 5 Arbeitstage | 5.5 | 15 | 80 | - | 12 | -0.007 ~ +0.003 | Stocked Product | 11 | 1 | 10° | |
88.25 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 15 | 80 | - | 12 | -0.007 ~ +0.003 | Stocked Product | 12 | 2 | - |
Loading...
Spezifikationen
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 0.05 | - | 3 | 0.2 | 0.1 | 40 | 10° | 1 |
| 0.1 | - | 3 | 0.4 | 0.2 | 40 | 10° | 1 | |
| 0.1 | 6 | 6 | 0.4 | 0.2 | 50 | 15° | 1 | |
| 0.15 | - | 3 | 0.6 | 0.3 | 40 | 10° | 1 | |
| 0.2 | - | 3 | 0.8 | 0.4 | 40 | 10° | 1 | |
| 0.2 | 6 | 6 | 0.8 | 0.4 | 50 | 15° | 1 | |
| 0.25 | - | 3 | 1 | 0.5 | 40 | 10° | 1 | |
| 0.3 | - | 3 | 1.2 | 0.6 | 40 | 10° | 1 | |
| 0.3 | 6 | 6 | 1.2 | 0.6 | 50 | 15° | 1 | |
| 0.35 | - | 3 | 1.4 | 0.7 | 40 | 10° | 1 | |
| 0.4 | - | 3 | 1.6 | 0.8 | 40 | 10° | 1 | |
| 0.4 | 6 | 6 | 1.6 | 0.8 | 50 | 15° | 1 | |
| 0.45 | - | 3 | 1.8 | 0.9 | 40 | 10° | 1 | |
| 0.5 | - | 4 | 2 | 1 | 40 | 10° | 1 | |
| 0.5 | 6 | 6 | 2 | 1 | 50 | 15° | 1 | |
| 0.55 | - | 4 | 2.2 | 1.1 | 40 | 10° | 1 | |
| 0.6 | - | 4 | 2.4 | 1.2 | 40 | 10° | 1 | |
| 0.65 | - | 4 | 2.6 | 1.3 | 40 | 10° | 1 | |
| 0.7 | - | 4 | 2.8 | 1.4 | 40 | 10° | 1 | |
| 0.75 | - | 4 | 3 | 1.5 | 40 | 10° | 1 | |
| 0.75 | 6 | 6 | 3 | 1.5 | 50 | 15° | 1 | |
| 0.8 | - | 4 | 3 | 1.6 | 40 | 10° | 1 | |
| 0.85 | - | 4 | 3 | 1.7 | 40 | 10° | 1 | |
| 0.9 | - | 4 | 3 | 1.8 | 40 | 10° | 1 | |
| 0.95 | - | 4 | 3 | 1.9 | 40 | 10° | 1 | |
| 1 | - | 4 | 3 | 2 | 40 | 10° | 1 | |
| 1 | 6 | 6 | 3 | 2 | 50 | 15° | 1 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Outer Diameter D |
Overall Length L |
Under Neck Angle θ |
Figure | ||
| Tip R |
Shank Diameter d |
|||||||
| TSC-BEM2S | 1.05 | - | 4 | 3 | 2.1 | 40 | 10° | 1 |
| 1.1 | - | 4 | 3 | 2.2 | 40 | 10° | 1 | |
| 1.15 | - | 4 | 3 | 2.3 | 40 | 10° | 1 | |
| 1.2 | - | 4 | 3 | 2.4 | 40 | 10° | 1 | |
| 1.25 | - | 4 | 3.5 | 2.5 | 40 | 10° | 1 | |
| 1.3 | - | 4 | 3.5 | 2.6 | 40 | 10° | 1 | |
| 1.4 | - | 4 | 3.5 | 2.8 | 40 | 10° | 1 | |
| 1.45 | - | 4 | 3.5 | 2.9 | 40 | 10° | 1 | |
| 1.5 | - | 4 | 4 | 3 | 40 | 10° | 1 | |
| 1.5 | 6 | 6 | 4 | 3 | 60 | 10° | 1 | |
| 1.55 | - | 4 | 4 | 3.1 | 40 | 10° | 1 | |
| 1.6 | - | 4 | 4 | 3.2 | 40 | 10° | 1 | |
| 1.65 | - | 4 | 4 | 3.3 | 40 | 10° | 1 | |
| 1.7 | - | 4 | 4 | 3.4 | 40 | 10° | 1 | |
| 1.75 | - | 4 | 5 | 3.5 | 40 | 10° | 1 | |
| 1.8 | - | 4 | 5 | 3.6 | 40 | 10° | 1 | |
| 1.85 | - | 4 | 5 | 3.7 | 40 | 10° | 1 | |
| 1.9 | - | 4 | 5 | 3.8 | 40 | 10° | 1 | |
| 2 | 4 | 4 | 6 | 4 | 50 | - | 2 | |
| 2 | - | 6 | 6 | 4 | 50 | 10° | 1 | |
| 2.15 | - | 6 | 6 | 4.3 | 50 | 10° | 1 | |
| 2.2 | - | 6 | 6 | 4.4 | 50 | 10° | 1 | |
| 2.3 | - | 6 | 6 | 4.6 | 50 | 10° | 1 | |
| 2.35 | - | 6 | 6 | 4.7 | 50 | 10° | 1 | |
| 2.4 | - | 6 | 6 | 4.8 | 50 | 10° | 1 | |
| 2.5 | - | 6 | 8 | 5 | 50 | 10° | 1 | |
| 2.6 | - | 6 | 8 | 5.2 | 50 | 10° | 1 | |
| 2.75 | - | 6 | 8 | 5.5 | 50 | 10° | 1 | |
| 3 | - | 6 | 10 | 6 | 60 | - | 2 | |
| 3.5 | - | 8 | 12 | 7 | 60 | 10° | 1 | |
| 4 | - | 8 | 13 | 8 | 60 | - | 2 | |
| 4.5 | - | 10 | 14 | 9 | 70 | 10° | 1 | |
| 5 | - | 10 | 15 | 10 | 80 | - | 2 | |
| 5.5 | - | 12 | 15 | 11 | 80 | 10° | 1 | |
| 6 | - | 12 | 15 | 12 | 80 | - | 2 | |
| 7 | - | 12 | 15 | 14 | 80 | - | 3 | |
| 8 | - | 16 | 20 | 16 | 150 | - | 2 | |
| 10 | - | 20 | 25 | 20 | 150 | - | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a tip (R) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● Delivers a finish with a very good working surface roughness after machining.
[ ! ]The following additional processing services are available for the products on this page.
Grundlegende Informationen
| Model | Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminium / Kupfer | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Torsion Availability | Included |
Konfigurieren
Basiseigenschaften
-
R Size(mm)
-
Flute Length (ℓ)(mm)
[5-15/1mmTeile]
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Shank Diameter (d)(mm)
-
Inventory Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-BEM2S
- SNR-TSC-BEM2S
- TSC-BEM2S
-
R Precision(μm)
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.