TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Radius-Multifunktionsfräser
-Durch die 3-Schneidenform ist er resistent gegen Rattern und kann stufenlos vom Eintauchen bis zum Nutenfräsen eingesetzt werden
-Einzigartige Spanleitstufenform ermöglicht Nutenfräsen mit einer Schnitttiefe, die der von 2 Schneiden entspricht
-Vergleich zu Vierkantfräsern mit 30° Schrägungswinkel sind sowohl Rotation als auch Vorschub mehr als doppelt so schnell
-Radius-Schneide ist auch effektiv bei der Unterdrückung von Spänen
- TS
- General Steel
- 3 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Arbeitstage | 6 | 0.3 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 0.5 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 6 | 1.5 | 21 | 60 | 6 | 26 ～ 42 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.3 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 0.5 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 1.5 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 8 | 2 | 26 | 75 | 8 | 31 ～ 51 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.3 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 0.5 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 1.5 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 10 | 2 | 34 | 90 | 10 | 39 ～ 60 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.3 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 0.5 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 1.5 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 12 | 2 | 38 | 100 | 12 | 43 ～ 70 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 0.5 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 16 | 1 | 48 | 110 | 16 | 58 ～ 78 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 0.5 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 8 Arbeitstage | 20 | 1 | 56 | 130 | 20 | 66 ～ 92 | Standard Neck Relief | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.3 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 0.5 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 6 | 1.5 | 5 ～ 21 | 60 | 6 | 26 ～ 42 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.3 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 0.5 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 1.5 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 8 | 2 | 5 ～ 26 | 75 | 8 | 31 ～ 51 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.3 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 0.5 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 1.5 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 10 | 2 | 5 ～ 34 | 90 | 10 | 39 ～ 60 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.3 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 0.5 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 1.5 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 12 | 2 | 5 ～ 38 | 100 | 12 | 43 ～ 70 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 0.5 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 16 | 1 | 5 ～ 48 | 110 | 16 | 53 ～ 78 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 0.5 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
- | 1 | 7 Arbeitstage | 20 | 1 | 5 ～ 56 | 130 | 20 | 61 ～ 92 | Cutting Edge R Processing | 2 | ||
69.21 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.2 | 16 | 60 | 6 | - | Stocked Product | 1 | |
58.43 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.3 | 16 | 60 | 6 | - | Stocked Product | 1 | |
48.57 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 0.5 | 16 | 60 | 6 | - | Stocked Product | 1 | |
49.58 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.2 | 18 | 60 | 6 | - | Stocked Product | 1 | |
45.31 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.3 | 18 | 60 | 6 | - | Stocked Product | 1 | |
50.76 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | 18 | 60 | 6 | - | Stocked Product | 1 | |
66.00 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 1 | 18 | 60 | 6 | - | Stocked Product | 1 | |
71.43 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | 21 | 60 | 6 | - | Stocked Product | 1 | |
71.08 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | 21 | 60 | 6 | - | Stocked Product | 1 | |
71.08 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 1 | 21 | 60 | 6 | - | Stocked Product | 1 | |
60.46 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | 21 | 60 | 6 | - | Stocked Product | 2 | |
56.70 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | 21 | 60 | 6 | - | Stocked Product | 2 | |
65.40 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | 21 | 60 | 6 | - | Stocked Product | 2 | |
65.11 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1.5 | 21 | 60 | 6 | - | Stocked Product | 2 |
Loading...
Spezifikationen
Model Number
TSC-CR-HEM3R (Stocked Product) / T-TSC-HEM3R (Manufactured Product)
| Outer Diameter D |
Radius | R Select (Stocked Product) | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| CR 0.1 mm Increment Designation (Manufactured Product) |
|||||||
| 3 | 0.2 0.3 0.5 | 16 | 60 | 6 | 1 | ● | |
| 4 | 0.2 0.3 0.5 1 | 18 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 5 | 0.3 0.5 1 | 21 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 6 | 0.3 0.5 1 1.5 | 21 | 60 | 6 | 2 | ● | |
| 0.1 ~ 0.9 | □ | ||||||
| 7 | 0.1 ~ 1.0 | 24 | 70 | 8 | 1 | □ | |
| 7.5 | 0.1 ~ 1.0 | 24 | 70 | 8 | 1 | □ | |
| 8 | 0.3 0.5 1 1.5 2 | 26 | 75 | 8 | 2 | ● | |
| 0.1 - 1.4 | □ | ||||||
| 9 | 0.1 ~ 1.5 | 26 | 80 | 10 | 1 | □ | |
| 10 | 0.3 0.5 1 1.5 2 | 34 | 90 | 10 | 2 | ● | |
| 0.1 ~ 1.9 | □ | ||||||
| 11 | 0.1 ~ 2.0 | 34 | 100 | 12 | 1 | □ | |
| 12 | 0.3 0.5 1 1.5 2 | 38 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | ||||||
| 16 | 0.5 1 | 48 | 110 | 16 | 2 | ● | |
| 0.1 ~ 3.0 | □ | ||||||
| 20 | 0.5 1 | 56 | 130 | 20 | 2 | ● | |
| 0.1 ~ 3.0 | □ | ||||||
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● Has a 3-flute shape to be strong against chatter and is capable of stepless grooving.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Nut / Thrust (Z-Feed) / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Ausführung
- SN-TSC-CR-HEM3R
- SNR-TSC-CR-HEM3R
- TSC-CR-HEM3R
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.