XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model (Teilenummern)
- Mengenrabatt
Konfigurierbar in [Schneidenlänge] 0.2 - 9 mm / [Schneidendurchmesser] 0.1 - 6 mm / [Durchmessertoleranz] 0 mm / [Halslänge] 0.3 - 60 mm / [Halsdurchmesser] 0.085 - 5.8 mm
Speziell entwickelt für präzise Konturbearbeitung, Hochgeschwindigkeitsfräsarbeiten und eine effiziente Zerspanung verschiedener Werkstoffe, überzeugen die Schaftfräser von MISUMI durch ihre Vielseitigkeit. Mit einer Schneidenlänge von 0.2 bis 9 mm unterstützen sie eine präzise und effiziente Bearbeitung, selbst bei komplexen Anwendungen. Mit einem Schneidendurchmesser von 0.1 bis 6 mm stellen diese Schaftfräser sicher, dass die Maßhaltigkeit zuverlässig bleibt und die Herstellungsqualität konstant. Bei einem Halsdurchmesser von 0.085 bis 5.8 mm und einer Halslänge von 0.3 bis 60 mm gewährleisten sie hervorragende Voraussetzungen.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
38.40 € | 1 | Verfügbar | 5 Arbeitstage | 0.1 | 0.2 | 4 | 50 | 0.3 | Sharp Corner | 1 | 0.085 | 0.31 | 0.33 | 0.37 | 0.41 | 10° | |
42.08 € | 1 | Verfügbar | 5 Arbeitstage | 0.1 | 0.2 | 4 | 50 | 0.5 | Sharp Corner | 1 | 0.085 | 0.52 | 0.55 | 0.61 | 0.69 | 10° | |
52.35 € | 1 | Verfügbar | 5 Arbeitstage | 0.1 | 0.2 | 4 | 50 | 1 | Sharp Corner | 1 | 0.085 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
24.43 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 0.5 | Sharp Corner | 1 | 0.18 | 0.52 | 0.55 | 0.61 | 0.69 | 10° | |
25.57 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 1 | Sharp Corner | 1 | 0.18 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
30.26 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 1.5 | Sharp Corner | 1 | 0.18 | 1.57 | 1.65 | 1.83 | 2.06 | 10° | |
36.35 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 2 | Sharp Corner | 1 | 0.18 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
34.90 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 2.5 | Sharp Corner | 1 | 0.18 | 2.62 | 2.75 | 3.05 | 3.43 | 10° | |
37.43 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 3 | Sharp Corner | 1 | 0.18 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
62.36 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 3.5 | Sharp Corner | 1 | 0.18 | 3.66 | 3.85 | 4.27 | 4.81 | 10° | |
51.08 € | 1 | Verfügbar | 5 Arbeitstage | 0.2 | 0.3 | 4 | 50 | 4 | Sharp Corner | 1 | 0.18 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
22.06 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 1 | Sharp Corner | 1 | 0.28 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
21.78 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 1.5 | Sharp Corner | 1 | 0.28 | 1.57 | 1.65 | 1.83 | 2.06 | 10° | |
25.84 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 2 | Sharp Corner | 1 | 0.28 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
31.50 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 2.5 | Sharp Corner | 1 | 0.28 | 2.62 | 2.75 | 3.05 | 3.43 | 10° | |
27.09 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 3 | Sharp Corner | 1 | 0.28 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
31.41 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 4 | Sharp Corner | 1 | 0.28 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
31.41 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 5 | Sharp Corner | 1 | 0.28 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
35.45 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 6 | Sharp Corner | 1 | 0.28 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
42.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | 0.45 | 4 | 50 | 9 | Sharp Corner | 1 | 0.28 | 9.42 | 9.89 | 10.98 | 12.36 | 10° | |
16.16 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 1 | Sharp Corner | 1 | 0.37 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
15.10 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 2 | Sharp Corner | 1 | 0.37 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
48.98 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 6 | 50 | 2 | Sharp Corner | 1 | 0.37 | 2.06 | 2.13 | 2.28 | 2.45 | 15° | |
15.10 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 3 | Sharp Corner | 1 | 0.37 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
15.10 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 4 | Sharp Corner | 1 | 0.37 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
15.52 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 5 | Sharp Corner | 1 | 0.37 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
19.45 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 6 | Sharp Corner | 1 | 0.37 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
36.88 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 7 | Sharp Corner | 1 | 0.37 | 7.33 | 7.69 | 8.54 | 9.61 | 10° | |
33.99 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 8 | Sharp Corner | 1 | 0.37 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
38.82 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 9 | Sharp Corner | 1 | 0.37 | 9.42 | 9.89 | 10.98 | 12.36 | 10° | |
42.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 10 | Sharp Corner | 1 | 0.37 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
42.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.4 | 0.6 | 4 | 50 | 12 | Sharp Corner | 1 | 0.37 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
11.60 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 1 | Sharp Corner | 1 | 0.46 | 1.05 | 1.1 | 1.22 | 1.37 | 10° | |
12.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 2 | Sharp Corner | 1 | 0.46 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
11.25 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 3 | Sharp Corner | 1 | 0.46 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
12.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 4 | Sharp Corner | 1 | 0.46 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
34.55 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 6 | 50 | 4 | Sharp Corner | 1 | 0.46 | 4.13 | 4.26 | 4.56 | 4.91 | 15° | |
11.25 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 5 | Sharp Corner | 1 | 0.46 | 5.24 | 5.49 | 6.1 | 6.87 | 10° | |
12.47 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 6 | Sharp Corner | 1 | 0.46 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
17.34 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 7 | Sharp Corner | 1 | 0.46 | 7.33 | 7.69 | 8.54 | 9.61 | 10° | |
19.07 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 8 | Sharp Corner | 1 | 0.46 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
21.59 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 9 | Sharp Corner | 1 | 0.46 | 9.42 | 9.89 | 10.98 | 12.36 | 10° | |
19.24 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 10 | Sharp Corner | 1 | 0.46 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
22.63 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 12 | Sharp Corner | 1 | 0.46 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
26.97 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | 0.7 | 4 | 50 | 15 | Sharp Corner | 1 | 0.46 | 15.71 | 16.48 | 18.31 | 20.6 | 10° | |
13.30 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 2 | Sharp Corner | 1 | 0.56 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
12.89 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 3 | Sharp Corner | 1 | 0.56 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | |
13.30 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 4 | Sharp Corner | 1 | 0.56 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
39.82 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 6 | 50 | 4 | Sharp Corner | 1 | 0.56 | 4.13 | 4.26 | 4.56 | 4.91 | 15° | |
13.30 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 6 | Sharp Corner | 1 | 0.56 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
15.66 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 7 | Sharp Corner | 1 | 0.56 | 7.33 | 7.69 | 8.54 | 9.61 | 10° | |
20.65 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 8 | Sharp Corner | 1 | 0.56 | 8.38 | 8.79 | 9.76 | 10.98 | 10° | |
22.52 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 10 | Sharp Corner | 1 | 0.56 | 10.47 | 10.99 | 12.21 | 13.73 | 10° | |
24.37 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 12 | Sharp Corner | 1 | 0.56 | 12.57 | 13.19 | 14.65 | 16.48 | 10° | |
33.07 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 50 | 15 | Sharp Corner | 1 | 0.56 | 15.71 | 16.48 | 18.31 | 20.6 | 10° | |
34.69 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | 0.9 | 4 | 70 | 18 | Sharp Corner | 1 | 0.56 | 18.85 | 19.78 | 21.97 | 24.71 | 10° | |
13.44 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 1.05 | 4 | 50 | 2 | Sharp Corner | 1 | 0.66 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | |
13.44 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 1.05 | 4 | 50 | 4 | Sharp Corner | 1 | 0.66 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | |
13.44 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 1.05 | 4 | 50 | 6 | Sharp Corner | 1 | 0.66 | 6.28 | 6.59 | 7.32 | 8.24 | 10° | |
18.55 € | 1 | Verfügbar | 5 Arbeitstage | 0.7 | 1.05 | 4 | 50 | 8 | Sharp Corner | 1 | 0.66 | 8.38 | 8.79 | 9.76 | 10.98 | 10° |
Loading...
Spezifikationen
Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
| Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
| 0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
| 1 | No Standards | ● | 1.05 | 1.1 | 1.22 | 1.37 | ||||||||
| 0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
| 1 | ● | ● | 1.05 | 1.1 | 1.22 | 1.37 | ||||||||
| 1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | No Standards | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
| 3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
| 4 | No Standards | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
| 1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
| 2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
| 2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
| 3 | ● | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
| 6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
| 2 | 6 | 6 | No Standards | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
| 3 | - | 4 | ● | ● | 10° | 3.14 | 3.3 | 3.66 | 4.12 | |||||
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 5 | ● | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
| Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
| 2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
| 3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.1 | 6.87 | |||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
| 0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.2 | 2.44 | 2.75 | 1 |
| 3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 4 | 6 | 6 | No Standards | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
| 6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
| 7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.2 | 2.44 | 2.75 | 1 |
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
| 24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
| 0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
| 1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.3 | 3.66 | 4.12 | 1 |
| 4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
| 5 | No Standards | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
| 7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
| Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
| 1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.4 | 12.27 | |||||
| 12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference | ||||||||
Model Number
XAL-PEM2LB (Sharp Edge) / XAL-EM2LB (Standard)
| Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||||
| 2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
| 20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
| 50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
| 3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
| 14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
| 18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
| 25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
| 5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
| 30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
| 40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
| 6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | - | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
| 60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
Weitere Informationen
● The ideal length under neck can be selected for workpiece machining in deep areas.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling mild steel, giving improved shape accuracy to the machined objects.
[ ! ]The XAL coating does not have conductive properties. It cannot be used with conduction model tool setters.
[ ! ]The actual effective length is a guideline. Confirm the actual measurement if concerned about interference with the workpiece.
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy / Kunststoff | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For General Steel (AlCrN etc.) | Processing Applications | Flat Surface / Side Surface / Nut / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 | ● Inventory Product □ Manufacturer Product | ● |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Ausführung
- XAL-EM2LB
- XAL-PEM2LB
-
Geometry
- Sharp Corner
- Mit Führung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.