Ringschraube / rostfreier Stahl / drehbar / GN 581.5

Ringschraube / rostfreier Stahl / drehbar / GN 581.5
  • Mengenrabatt
Wenn Sie eine hochwertige Ringschraube suchen, empfehlen wir Ihnen diese von GANTER. Die Ringschraube in unserem Onlineshop ist in unterschiedlichen Materialien, Gewindedurchmessern und Antriebsformen wählbar. In der übergeordneten Kategorie finden Sie weitere Produkte passend für Ihre Anwendung. Herstellerdetails:Edelstahl-Ringschrauben GN 581.5 sind drehbar gelagert; dadurch ist die Kraftrichtung einstellbar und ein unbeabsichtigtes Auf- oder Überdrehen (wie bei Ringschrauben DIN 580 möglich) ausgeschlossen.
Diese Ringschrauben bieten eine hohe Belastbarkeit mit geprüfter Sicherheit (Sicherheitsfaktor 4) in allen Belastungsrichtungen.
Die in obiger Tabelle angegebene Nenntragfähigkeit ist auf dem Ring deutlich sichtbar angegeben. Sie gilt für den belastungsungünstigsten Fall der nebenstehend aufgeführten Belastungsarten.
Edelstahl-Ringschrauben GN 581.5 entsprechen der Maschinenrichtlinie 2006 / 42 / EG und sind BG-geprüft.
Der integrierte RFID-Transponder dient zur eindeutigen Kennzeichnung und Identifizierung des Anschlagmittels, z. B. bei der vorgeschriebenen regelmäßigen Überprüfung.
Die Innensechskantschraube ist unverlierbar.

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

GN 581.5 / Stainless Steel-Lifting Eye Bolts (Rotating)

Information


Stainless Steel-Lifting eye bolts GN 581.5 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in Stainless Steel-Lifting eye bolts DIN 580).
Stainless Steel-Lifting eye bolts GN 581.5 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
Stainless Steel-Lifting eye bolts GN 581.5 eye bolts comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
The hexagon socket bolt cannot be removed from the ring.

see also...
• Lifting eye bolts (rotating) GN 581 (Steel)

How to Order

How to order
1d1

Specification

• Ring
 Stainless Steel
  - German Material No. 1.4462
  - Forged
  - 100% electro magnetic tensile tested to EN 1677
  - Blank
• Bolt
 Stainless Steel
 German Material No. 1.4462
• Stainless Steel characteristics
• RoHS compliant

Dimensions

d1d2d3d4d5hk1k2Length lNominal load (WLL)
M 1218303230571256180.5 t [ 5 kN]
M 162235.53835661465241.0 t [10 kN]
M 2027.541.54740761674302.0 t [20 kN]
M 2433505648941992352.5 t [25 kN]

Method of Mounting

Method of
mounting
Number11222223 and 43 and 43 and 4
Angles of
inclination
90°90°0 to 45°45 to 60°asymm.0 to 45°45 to 60°asymm.
Factor11221.4112.11.51
M 121.20 [ 0.34]0.50 t2.40 [0.68]1.00 t0.70 [0.24]0.50 t0.50 t1.06 t0.75 t0.50 t
M 162.40 [0.70]1.00 t4.80 [1.40]2.00 t1.42 [0.50]1.00 t1.00 t2.12 t1.50 t1.00 t
M 203.60 [1.20]2.00 t7.20 [2.40]4.00 t2.83 [0.86]2.00 t2.00 t4.24 t3.00 t2.00 t
M 245.20 [1.80]2.50 t10.40 [3.60]5.00 t3.53 [1.29]2.50 t2.50 t5.30 t3.75 t2.50 t

Safety Instructions

The loads given in brackets refer to the load capacity of the corresponding Stainless Steel-Lifting eye bolts DIN 580. If such a value is not indicated the use of the Stainless Steel-Lifting eye bolts DIN 580 is not permitted!
The bolt-on surface for the Stainless Steel-Lifting eye bolts GN 581.5 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.
Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.
Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.
The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of  -40° C to + 280° C. Load-bearing capacity under different conditions upon request.
Operating instructions with more details and specifications are included with every delivery
(see also www.ganter-griff.com/service).
Teilenummer
581.5-M12
581.5-M16
581.5-M20
581.5-M24
Teilenummer
Standard-Stückpreis
MindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?

176.26 €

1 Verfügbar 7 Arbeitstage

213.68 €

1 Verfügbar 4 Arbeitstage

273.84 €

1 Verfügbar 4 Arbeitstage

378.00 €

1 Verfügbar 4 Arbeitstage

Loading...

  1. 1

Technischer Support