Lötpinzette (Ersatzteil HS-401) (Teilenummern)

The replacement part for the HS-401 which enables the user to grab chip parts on high density substrates. Suitable for use with lead free solder. ■ 3-pin plug specification.■ Power Cord: 1 m

[Features]
· SMD high density substrates have been becoming ever denser and the spacing between components ever smaller, increasing the demand for tools which can be used with pin point accuracy.
· Hot tweezers solve this very problem.
· An SMD repair tool which is able to grab chip parts.
· A safety-focused and energy-saving design that only heats when the remote switch is set to ON.
· Allows for sensitive tweezer work with either the left or right hand.
· Small and lightweight with a weight of just 42 g (not including cord).
· A safety focused design with automatic recovery function, even when the load side shorts.
· Uses a set power control system that can supply heat in one second increments.
· Features sufficient power for use with lead free solder.
· Complies with FCC standards for radio frequency interference regulations.
· Has an input voltage of 100V to 240V.
· Uses a switching system that is compatible with voltages for all countries around the world. Simply insert the power supply plug into the outlet to use.
· 400°C in approximately 3 seconds (at MAX).
· Quick start-up for immediate use.
· Unlike copper bits which corrode due to heat and flux, these boast excellent abrasion resistance and will not react to acids and alkali.
· Solder will not adhere to the heater, making it ideal for reworking.