Tang-Typ MT Schaft Gewindebohrerhalter (Teilenummern)
Teilenummer
|
|---|
| M2T-TPS12 |
| M3T-TPS12 |
| M3T-TPS16 |
| M3T-TPS24 |
| M4T-TPS12 |
| M4T-TPS16 |
| M4T-TPS24 |
| M4T-TPS39 |
| M5T-TPS39 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Main Body Outer Diameter D1 (mm) | Tap Collet Outer Diameter D2 (mm) | Morse Taper | Mass (with Collet) (Kg) | Tap collet for use | Length from Reference Plane (mm) | Tension F1 (mm) | Compression F2 (mm) | Tapping Capacity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
377.64 € | 1 | 6 Arbeitstage | 44 | 38 | MT No.2 | 1.0 | TC12 | Up to the end face of the tap collet L1: (M3-M10) 150, (M12) 155.5 / up to the end face of the body L2: 112.5 | 15 | 10 | M3～M12 No.5～1/2UNC | ||
312.87 € | 1 | 6 Arbeitstage | 44 | 38 | MT No.3 | 1.2 | TC12 | Up to the end face of the tap collet L1: (M3-M10) 150, (M12) 155.5 / up to the end face of the body L2: 112.5 | 15 | 10 | M3～M12 No.5～1/2UNC | ||
336.54 € | 1 | 6 Arbeitstage | 57 | 47 | MT No.3 | 1.9 | TC16 | Up to the end face of the tap collet L1: (M4-M12) 165, (M14-M16) 168 / up to the end face of the body L2: 122 | 15 | 10 | M4～M16 No.8～5/8UNC | ||
419.79 € | 1 | 6 Arbeitstage | 62.5 | 56 | MT No.3 | 2.3 | TC24 | Up to the end face of the tap collet L1: (M10-M20) 180, (M22-M24) 184 / up to the end face of the body L2: 126 | 15 | 10 | M10～M24 3/8～7/8UNC | ||
305.38 € | 1 | 6 Arbeitstage | 44 | 38 | MT No.4 | 1.5 | TC12 | Up to the end face of the tap collet L1: (M3-M10) 152, (M12) 157.5 / up to the end face of the body L2: 114.5 | 15 | 10 | M3～M12 No.5～1/2UNC | ||
336.54 € | 1 | 6 Arbeitstage | 57 | 47 | MT No.4 | 2.3 | TC16 | Up to the end face of the tap collet L1: (M4-M12) 170, (M14-M16) 173 / up to the end face of the body L2: 127 | 15 | 10 | M4～M16 No.8～5/8UNC | ||
419.79 € | 1 | 6 Arbeitstage | 62.5 | 56 | MT No.4 | 2.7 | TC24 | Up to the end face of the tap collet L1: (M10-M20) 185, (M22-M24) 189 / up to the end face of the body L2: 131 | 15 | 10 | M10～M24 3/8～7/8UNC | ||
571.58 € | 1 | 6 Arbeitstage | 95 | 82 | MT No.4 | 7.1 | TC39 | Up to the end face of the tap collet L1: 245 / up to the end face of the body L2: 176 | 20 | 15 | M18～M39 3/4～1・1/2UNC | ||
689.91 € | 1 | 6 Arbeitstage | 95 | 82 | MT No.5 | 8.1 | TC39 | Up to the end face of the tap collet L1: 245 / up to the end face of the body L2: 176 | 20 | 15 | M18～M39 3/4～1・1/2UNC |
Loading...
Grundlegende Informationen
| Product Category | Grundkörper | Applicable Manufacturing Machinery (main unit) | Allgemeine Maschine |
|---|
Konfigurieren
Basiseigenschaften
-
Main Body Outer Diameter D1(mm)
- 44
- 57
- 62.5
- 95
-
Tap Collet Outer Diameter D2(mm)
- 38
- 47
- 56
- 82
-
Morse Taper
- MT No.2
- MT No.3
- MT No.4
- MT No.5
-
Mass (with Collet)(Kg)
-
Tap collet for use
- TC12
- TC16
- TC24
- TC39
-
Ausführung
- TPS
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.