Bohr-Räumwerkzeug DR
[Features]
· The tip is a drill and the large-diameter part has a reamer shape.
· Since drilling and finishing can be done simultaneously, machining time is shortened. (For through-hole)
[Applications]
· To be used when drilling holes and finish machining at the same time.
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Tool Diameter (mm) | Groove Length (mm) | Diameter tolerance (mm) | Number of flutes (Sheets) | Full length L (mm) | shank diameter | Drill Diameter | Drill Length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
132.71 € | 1 | 10 Arbeitstage | 3 | 52 | +0.002～+0.007 | 4 | 65 | 3 | 2.8 | 13 | ||
138.93 € | 1 | 6 Arbeitstage | 3.1 | 52 | +0.004～+0.009 | 4 | 75 | 3.1 | 2.9 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.2 | 52 | +0.004～+0.009 | 4 | 75 | 3.2 | 3 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.3 | 52 | +0.004～+0.009 | 4 | 75 | 3.3 | 3.1 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.4 | 52 | +0.004～+0.009 | 4 | 75 | 3.4 | 3.2 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.5 | 52 | +0.004～+0.009 | 4 | 75 | 3.5 | 3.3 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.6 | 52 | +0.004～+0.009 | 4 | 75 | 3.6 | 3.4 | 15 | ||
138.94 € | 1 | 6 Arbeitstage | 3.7 | 52 | +0.004～+0.009 | 4 | 75 | 3.7 | 3.5 | 15 | ||
138.95 € | 1 | 6 Arbeitstage | 3.8 | 52 | +0.004～+0.009 | 4 | 75 | 3.8 | 3.6 | 15 | ||
138.95 € | 1 | 6 Arbeitstage | 3.9 | 52 | +0.004～+0.009 | 4 | 75 | 3.9 | 3.7 | 15 | ||
126.51 € | 1 | 6 Arbeitstage | 4 | 52 | +0.004～+0.009 | 4 | 75 | 4 | 3.8 | 15 | ||
138.96 € | 1 | 6 Arbeitstage | 4.1 | 62 | +0.004～+0.009 | 4 | 87 | 4.1 | 3.9 | 18 | ||
138.98 € | 1 | 6 Arbeitstage | 4.2 | 62 | +0.004～+0.009 | 4 | 87 | 4.2 | 4 | 18 | ||
138.98 € | 1 | 6 Arbeitstage | 4.3 | 62 | +0.004～+0.009 | 4 | 87 | 4.3 | 4.1 | 18 | ||
138.98 € | 1 | 6 Arbeitstage | 4.4 | 62 | +0.004～+0.009 | 4 | 87 | 4.4 | 4.2 | 18 | ||
138.99 € | 1 | 6 Arbeitstage | 4.5 | 62 | +0.004～+0.009 | 4 | 87 | 4.5 | 4.25 | 18 | ||
138.99 € | 1 | 6 Arbeitstage | 4.6 | 62 | +0.004～+0.009 | 4 | 87 | 4.6 | 4.35 | 18 | ||
138.99 € | 1 | 6 Arbeitstage | 4.7 | 62 | +0.004～+0.009 | 4 | 87 | 4.7 | 4.45 | 18 | ||
138.99 € | 1 | 6 Arbeitstage | 4.8 | 62 | +0.004～+0.009 | 4 | 87 | 4.8 | 4.55 | 18 | ||
139.00 € | 1 | 6 Arbeitstage | 4.9 | 62 | +0.004～+0.009 | 4 | 87 | 4.9 | 4.65 | 18 | ||
126.54 € | 1 | 6 Arbeitstage | 5 | 62 | +0.004～+0.009 | 4 | 87 | 5 | 4.75 | 18 | ||
163.86 € | 1 | 6 Arbeitstage | 5.1 | 68 | +0.004～+0.009 | 4 | 95 | 5.1 | 4.85 | 20 | ||
157.71 € | 1 | 6 Arbeitstage | 5.2 | 68 | +0.004～+0.009 | 4 | 95 | 5.2 | 4.95 | 20 | ||
157.71 € | 1 | 6 Arbeitstage | 5.3 | 68 | +0.004～+0.009 | 4 | 95 | 5.3 | 5.05 | 20 | ||
157.72 € | 1 | 6 Arbeitstage | 5.4 | 68 | +0.004～+0.009 | 4 | 95 | 5.4 | 5.15 | 20 | ||
157.72 € | 1 | 6 Arbeitstage | 5.5 | 68 | +0.004～+0.009 | 4 | 95 | 5.5 | 5.2 | 20 | ||
157.72 € | 1 | 6 Arbeitstage | 5.6 | 68 | +0.004～+0.009 | 4 | 95 | 5.6 | 5.3 | 20 | ||
157.73 € | 1 | 6 Arbeitstage | 5.7 | 68 | +0.004～+0.009 | 4 | 95 | 5.7 | 5.4 | 20 | ||
157.73 € | 1 | 6 Arbeitstage | 5.8 | 68 | +0.004～+0.009 | 4 | 95 | 5.8 | 5.5 | 20 | ||
163.86 € | 1 | 6 Arbeitstage | 5.9 | 68 | +0.004～+0.009 | 4 | 95 | 5.9 | 5.6 | 20 | ||
150.77 € | 1 | 6 Arbeitstage | 6 | 68 | +0.004～+0.009 | 4 | 95 | 6 | 5.7 | 20 | ||
180.81 € | 1 | 6 Arbeitstage | 6.1 | 75 | +0.006～+0.012 | 4 | 105 | 6.1 | 5.8 | 21 | ||
180.82 € | 1 | 6 Arbeitstage | 6.2 | 75 | +0.006～+0.012 | 4 | 105 | 6.2 | 5.9 | 21 | ||
180.82 € | 1 | 6 Arbeitstage | 6.3 | 75 | +0.006～+0.012 | 4 | 105 | 6.3 | 6 | 21 | ||
180.82 € | 1 | 6 Arbeitstage | 6.4 | 75 | +0.006～+0.012 | 4 | 105 | 6.4 | 6.1 | 21 | ||
180.83 € | 1 | 6 Arbeitstage | 6.5 | 75 | +0.006～+0.012 | 4 | 105 | 6.5 | 6.2 | 21 | ||
180.84 € | 1 | 6 Arbeitstage | 6.6 | 75 | +0.006～+0.012 | 4 | 105 | 6.6 | 6.3 | 21 | ||
180.84 € | 1 | 6 Arbeitstage | 6.7 | 75 | +0.006～+0.012 | 4 | 105 | 6.7 | 6.4 | 21 | ||
180.85 € | 1 | 6 Arbeitstage | 6.8 | 75 | +0.006～+0.012 | 4 | 105 | 6.8 | 6.5 | 21 | ||
180.85 € | 1 | 6 Arbeitstage | 6.9 | 75 | +0.006～+0.012 | 4 | 105 | 6.9 | 6.6 | 21 | ||
165.30 € | 1 | 6 Arbeitstage | 7 | 75 | +0.006～+0.012 | 4 | 105 | 7 | 6.7 | 21 | ||
186.49 € | 1 | 6 Arbeitstage | 7.1 | 80 | +0.006～+0.012 | 4 | 110 | 7.1 | 6.8 | 22 | ||
186.50 € | 1 | 6 Arbeitstage | 7.2 | 80 | +0.006～+0.012 | 4 | 110 | 7.2 | 6.9 | 22 | ||
186.51 € | 1 | 6 Arbeitstage | 7.3 | 80 | +0.006～+0.012 | 4 | 110 | 7.3 | 7 | 22 | ||
186.52 € | 1 | 6 Arbeitstage | 7.4 | 80 | +0.006～+0.012 | 4 | 110 | 7.4 | 7.1 | 22 | ||
186.52 € | 1 | 6 Arbeitstage | 7.5 | 80 | +0.006～+0.012 | 4 | 110 | 7.5 | 7.2 | 22 | ||
186.53 € | 1 | 6 Arbeitstage | 7.6 | 80 | +0.006～+0.012 | 4 | 110 | 7.6 | 7.3 | 22 | ||
186.53 € | 1 | 6 Arbeitstage | 7.7 | 80 | +0.006～+0.012 | 4 | 110 | 7.7 | 7.4 | 22 | ||
186.54 € | 1 | 6 Arbeitstage | 7.8 | 80 | +0.006～+0.012 | 4 | 110 | 7.8 | 7.5 | 22 | ||
186.55 € | 1 | 6 Arbeitstage | 7.9 | 80 | +0.006～+0.012 | 4 | 110 | 7.9 | 7.6 | 22 | ||
175.69 € | 1 | 6 Arbeitstage | 8 | 80 | +0.006～+0.012 | 4 | 110 | 8 | 7.7 | 22 | ||
213.37 € | 1 | 6 Arbeitstage | 8.1 | 89 | +0.006～+0.012 | 4 | 119 | 8.1 | 7.8 | 23 | ||
213.38 € | 1 | 6 Arbeitstage | 8.2 | 89 | +0.006～+0.012 | 4 | 119 | 8.2 | 7.9 | 23 | ||
213.39 € | 1 | 6 Arbeitstage | 8.3 | 89 | +0.006～+0.012 | 4 | 119 | 8.3 | 8 | 23 | ||
213.41 € | 1 | 6 Arbeitstage | 8.4 | 89 | +0.006～+0.012 | 4 | 119 | 8.4 | 8.1 | 23 | ||
213.42 € | 1 | 6 Arbeitstage | 8.5 | 89 | +0.006～+0.012 | 4 | 119 | 8.5 | 8.2 | 23 | ||
213.42 € | 1 | 6 Arbeitstage | 8.6 | 89 | +0.006～+0.012 | 4 | 119 | 8.6 | 8.3 | 23 | ||
213.43 € | 1 | 6 Arbeitstage | 8.7 | 89 | +0.006～+0.012 | 4 | 119 | 8.7 | 8.4 | 23 | ||
213.44 € | 1 | 6 Arbeitstage | 8.8 | 89 | +0.006～+0.012 | 4 | 119 | 8.8 | 8.5 | 23 | ||
213.45 € | 1 | 6 Arbeitstage | 8.9 | 89 | +0.006～+0.012 | 4 | 119 | 8.9 | 8.6 | 23 |
Loading...
Grundlegende Informationen
| Shank Type | Gerader Schaft | work material | Stahl allgemein / Gusseisen / Aluminium / Kupfer / Legierter Stahl | Coating Y/N | N/A |
|---|---|---|---|---|---|
| Groove Shape | Spiralform | Base Blade Y/N | N/A | blade shape | Right blade right torsion |
| Torsional Angle | 30° | Shank diameter tolerance | h7 | Tool Material Type | High-speed steel |
Konfigurieren
Basiseigenschaften
-
Tool Diameter(mm)
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
- 13
-
Groove Length(mm)
-
Diameter tolerance(mm)
- +0.002～+0.007
- +0.004～+0.009
- +0.006～+0.012
- +0.007～+0.015
-
Number of flutes(Sheets)
-
Full length L(mm)
-
Ausführung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 6 Tage oder weniger
- 10 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.