Rechteckstecker
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
D-Sub-Steckverbinder – XM2 / XM3
OMRON
[Features]
・ These are D-sub connectors that are ideal for OA equipment interfaces.
・ These are shielded connectors for EMI countermeasures.
・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
・ A compact, sturdy type with a metal shell.
・ Various fasteners and ground conductor fittings are available.
▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
- Empfehlung
Einzeldraht-Druckverbinder – XG5 (Einzeldraht-Druckverbinder) 【1-100 Stk. pro Packung】
OMRON
[Features]
・ A solution to the troublesome nature of discrete wire connections has been found.
・A press-fit socket connector for mating with MIL type plugs.
・Uses a 2-slot press-fit structure and insulation barrel to enable reliable and high current (3A) discrete wire press-fit connections.
・The use of a wide range of covers to fit the application allows you to keep saving space on wiring configurations and discrete wires.
・Using the unique, easy locking lever, enables you to lock with an original (XG8B, XG8WL terminals) or box plug (XG4C).
▪ UL standard (File No.E103202) certified products are used as standard (except for XG5S type).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.26 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD
HIROSE ELECTRONIC
A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.39 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder in Löt- / DIP-Ausführung, Serie 57
FUJIKURA (DDK)
A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.25 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Ausführung C, IP66 Gehäuse für schwenkbaren Hebel
ILME
[Features]
· Environmentally tolerant enclosure.
· Standard type, made of aluminum die casting, with powder coating and stainless steel flexible rotating lever.
· NBR gasket, IP66- Mengenrabatt
› Jetzt konfigurierenab∗ ： 10.13 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckergehäuse D-Sub-Steckverbinder (EMI-Abschirmung) , Serie CTH
HIROSE ELECTRONIC
These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.43 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-10,000 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.12 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
CP-Schraubausführung für Starkstrom, 35 A / 690 V, Einsatz
ILME
CP, high current screw type, 35A / 690V insert
[Features]
・CP
・High current spring type.
▪ 35A / 690V.
▪ Insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 31.47 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
EPIC® H-B 16 TS-RO
LAPP
Das robuste niedrige Gehäuse mit einemischenstutzen hat einen seitlichen Kabeleingang und Bolzen für einen Längsbügel. Es eignet sich für den Einsatz im Maschinen- und Anlagenbau. Gehäusebauform H-B. Der Industriestandard. Griffige Rippen für komfortables Ziehen der Steckers
Schutzart nach UL50E geprüft- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.35 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie PCR
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.50 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Steckverbinder mit Verriegelung für Interne Stromversorgung, kompatibel mit Verguss mit 5 mm Rastermaß – Serie DF5【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.07 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D
HIROSE ELECTRONIC
A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
[Features]
• Metal shell makes it compact and sturdy.
• Connectors can be mounted on the chassis, or on the front or back sides of the panel.
• Height of the wiring side is greatly reduced to facilitate more compact sets.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.75 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
EPIC ® H-A 3 TG
LAPP
Das Tüllengehäuse aus robustem Kunststoff hat einen direkten Kabeleingang und Bolzen für einen Längsbügel. Es eignet sich für den Einsatz in Elektronik-Laboratorien. Innovative Gehäuse in Metall- und Kunststoffausführung
Leichtes, chemisch beständiges Kunststoffgehäuse
Schutzart nach UL50E geprüft- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.67 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 6.54 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 26.56 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 0.88 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 0.13 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15
HIROSE ELECTRONIC
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kleiner rechteckiger Schnittstellen-Steckverbinder, Serie 3200
HIROSE ELECTRONIC
This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
[Features]
• A receptacle connector board implementation surface with a height of the 2.9 mm.
• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
• This receptacle connector can also be prepared in an embossed packaging product format.
• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
• A latch lock is applied to both sides for mating processes.
• This lock is implemented with the minimum space possible, and helps downsize your product set.
• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
• The number of pins available is either 8 or 10.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.81 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Haube mit Schnellverriegelung
PROVERTHA
One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 16.10 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 71.76 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CSH-Werkzeug nicht erforderlich, Federausführung, 16 A / 500 V, Einsatz
ILME
CSH, no-tool-required spring type, 16A / 500V insert
[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert- Mengenrabatt
› Jetzt konfigurierenab∗ ： 15.36 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
MIXO modularer Einsatz und Kontakt
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.65 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 1.56 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
H-A 10 AG ANBAUGEHAEUSE
LAPP
Das robuste Metallgehäuse mit einem Längsbügel und einer Dichtung ist die ideale Option für beengte Platzverhältnisse. Diese Steckverbinder überzeugen vor allem durch ihre kompakte Gehäuseform
Schutzart nach UL50E geprüft- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.28 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 6.28 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 0.53 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 7.88 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 12.67 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 3.83 € Minimum Lieferzeit ： 79 Arbeitstage *Stückpreis Standardkonfiguration
-
Größe 5: Einzelverriegelung (Hebel auf Unterseite) / Schott (Durchgang)
WEIDMÜLLER
Das Gehäuse ist dank einer speziellen Druckgusslegierung und einer mehrstufigen Versiegelung der Oberfläche perfekt geschützt.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.35 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Größe 4: Doppelte Verriegelung (Hebel auf Unterseite) / Schott (Durchgang)
WEIDMÜLLER
Das Gehäuse ist dank einer speziellen Druckgusslegierung und einer mehrstufigen Versiegelung der Oberfläche perfekt geschützt.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 13.43 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel- / FPC- / Koaxialkabel (dünn) -Steckverbinder (1 mm Rastermaß) – Serie DF19【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.14 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / 2-reihiger, mehrpoliger Board-to-Cable-Steckverbinder mit 1 mm Rastermaß, Serie DF20【100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Lötverbindung) – Serie HD
HIROSE ELECTRONIC
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.55 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, Serie QR / P4
HIROSE ELECTRONIC
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.65 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kleiner rechteckiger Schnittstellen-Steckverbinder mit langer Lebensdauer, Serie 3500
HIROSE ELECTRONIC
This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.
[Features]
• This connector has a long service life and can be inserted and removed up to 20,000 times.
• The terminal structure has high reliability, and is a 2-point contact bellows type.
• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.
• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.
• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.
• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.
• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.
• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.
• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.
• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.57 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rack- und Platten-Steckverbinder, klein, Serie QR / P15
HIROSE ELECTRONIC
Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
[Features]
・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
・Power supply compatibility: The 24-pin type incorporates power source terminal type.
・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
・Further, it is also possible to crimp using automated machines.
・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.05 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.53 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Baureihe D-Sub, D02, D02-M15
JAPAN AVIATION ELECTRONICS(JAE)
Ein kleiner, leichter und äußerst zuverlässiger Steckverbinder, der alle Arten von elektronischen Geräten kleiner und dichter macht, um erweiterte Funktionen zu unterstützen.
[Eigenschaften]
Der D-Sub-Stecker entwickelt sich mit seiner Kombination aus Stift- und Buchsenstecker zum Standard.
Austauschbar mit verschiedenen Steckertypen und häufig verwendetem Zubehör.
Die Form der Muschelverbindung hat eine Polarität, die ein versehentliches verkehrtes Einstecken vollständig verhindert.
Die DO2-Serie ist ein hochdichter Montagesteckverbinder mit etwa doppelt so vielen Kontakten bei gleicher Gehäusegröße wie der D-Sub.
Das äußere Erscheinungsbild ist kurz und kompakt. Das Kontakt- und Isoliermaterial befindet sich in einer harten Stahlhülle.
Es gibt 5 Schalengrößen (E, A, B, C und D), die mit 9, 15, 25, 37 und 50 Kernen ausgestattet sind. Spezielle Arrays mit Koaxial- und Hochstromkontakten sind ebenfalls erhältlich.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.37 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han Q (Crimp-Verdrahtung)
HARTING
This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.78 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Abdeckungen / Gehäuse der Serie Han
HARTING
A range of hoods and housings to suit the number of wires of each connector. Can be selected to suit the electrical wire entry direction and mounting method (Models are separated using "-" rather than spaces).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.89 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
CRC™ (kompakter Roboter-Steckverbinder) (55836)
MOLEX
Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)- Mengenrabatt
› Jetzt konfigurierenab∗ ： 23.83 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | OMRON | HIROSE ELECTRONIC | FUJIKURA (DDK) | ILME | HIROSE ELECTRONIC | HIROSE ELECTRONIC | ILME | LAPP | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | LAPP | PHOENIX CONTACT | PHOENIX CONTACT | DECA | VOGT VERBINDUNGSTECHNIK | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | PROVERTHA | ILME | ILME | ILME | UNIVER | LAPP | PHOENIX CONTACT | MH CONNECTORS | TRU COMPONENTS | HARTING | PHOENIX CONTACT | WEIDMÜLLER | WEIDMÜLLER | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | HARTING | HARTING | MOLEX |
| Artikelserie | Einzeldraht-Druckverbinder – XG5 (Einzeldraht-Druckverbinder) 【1-100 Stk. pro Packung】 | D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD | Steckergehäuse D-Sub-Steckverbinder (EMI-Abschirmung) , Serie CTH | Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-10,000 Stk. pro Packung】 | D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D | Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15 | Kleiner rechteckiger Schnittstellen-Steckverbinder, Serie 3200 | CSH-Werkzeug nicht erforderlich, Federausführung, 16 A / 500 V, Einsatz | Größe 5: Einzelverriegelung (Hebel auf Unterseite) / Schott (Durchgang) | Größe 4: Doppelte Verriegelung (Hebel auf Unterseite) / Schott (Durchgang) | D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】 | Kleiner rechteckiger Schnittstellen-Steckverbinder mit langer Lebensdauer, Serie 3500 | Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】 | ||||||||||||||||||||||||||||||||
| CAD |
| ||||||||||||||||||||||||||||||||||||||||||||
| ab∗ | 4.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.35 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.67 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.54 € *Stückpreis Standardkonfiguration | 26.56 € *Stückpreis Standardkonfiguration | 0.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 71.76 € *Stückpreis Standardkonfiguration | 15.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.67 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.83 € *Stückpreis Standardkonfiguration | 11.35 € *Stückpreis Standardkonfiguration | 13.43 € *Stückpreis Standardkonfiguration | 0.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.89 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.83 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | Versand am selben Tag | 6 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 79 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage |
| Connector Shape | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | - | Quadratisch | Quadratisch | Quadratisch | - | - | - | - | - | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | - | - | - | - | - | - | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - |
| D· E· F | - | - | Dsub | - | - | Dsub | Sonstige | - | - | - | Sonstige | Dsub | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | Dsub | Dsub | - | - | - | - | Dsub / Sonstige | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | - |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | Sonstige | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | Sonstige | - | - | - | - |
| Applicable pin/contact | Stecker / Buchse | Buchse | Stecker / Buchse | Stecker / Buchse | - | - | Stecker / Buchse | Stecker / Buchse | - | Stecker / Buchse | Buchse | Stecker / Buchse | - | - | - | - | - | Stecker / Buchse | Stecker | Stecker | - | - | Stecker / Buchse | Stecker / Buchse | Buchse | - | - | - | - | - | - | - | - | Buchse | Buchse | Stecker / Buchse | Stecker / Buchse | Stecker | Buchse | Stecker / Buchse | Stecker / Buchse / Kombination aus Stecker/Buchse | Stecker / Buchse | Stecker / Buchse | - | Stecker |
| Number Of Cores | 9 ～ 37 | 5 ～ 60 | 9 ～ 37 | 14 ～ 50 | - | 9 ～ 37 | 2 ～ 40 | 6 ～ 12 | - | 20 ～ 96 | 2 ～ 10 | 9 ～ 37 | - | - | - | - | - | 4 ～ 32 | 31 ～ 51 | 8 ～ 10 | 9 ～ 50 | - | 6 ～ 48 | 1 ～ 25 | 1 | - | - | - | - | - | - | - | - | 8 ～ 20 | 10 ～ 50 | 9 ～ 50 | 9 ～ 37 | 16 | 10 | 8 ～ 40 | 8 ～ 60 | 3 ～ 50 | 7 ～ 12 | - | 12 ～ 30 |
| Application | Kabelanschluss / Für PCB | Kabelanschluss | Kabelanschluss | Kabelanschluss / Plattenmontage | - | - | Kabelanschluss / Für PCB | Kabelanschluss | - | Kabelanschluss / Für PCB / Plattenmontage | Kabelanschluss | Kabelanschluss | - | - | - | - | - | Kabelanschluss / Für PCB / Plattenmontage | Kabelanschluss | Kabelanschluss | - | - | Kabelanschluss | Kabelanschluss | Kabelanschluss | - | - | - | - | - | - | - | - | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Plattenmontage | Kabelanschluss | Plattenmontage | Kabelanschluss / Für PCB | Kabelanschluss / Für PCB | Kabelanschluss | - | Kabelanschluss |
| Allowable Current(A) | 5 | 2 ～ 3 | 1 | 5 | - | - | 1 | 35 | - | 1 | 7 ～ 8 | 1 | - | 41 ～ 76 | - | - | - | 0.5 ～ 2 | 0.5 | 0.5 | - | - | 16 | 4 ～ 200 | AC/DC | - | - | - | - | - | - | - | - | 1 | 1 | 3 | 3 | 3 | 1 | 1 ～ 6 | 3 | - | 10 | - | 3 ～ 4 |
| Allowable Voltage(V) | AC 300 | AC 300 | 200 VAC | AC500 | - | - | AC 150 | 690 | - | 250 VAC | AC / DC 500 | 200 VAC | - | 1000 | - | - | - | AC100 ～ 250 VAC | AC100 | AC125 | - | - | 500 | 50 ～ 1000 | 12 VDC - 230 VAC | - | - | - | - | - | - | - | - | AC100 | AC100 | AC 400 | AC350 | AC 300, AC 250 | AC125 | - | AC 300 | - | 400 ～ 600 | - | 250 |
| Wire connection method | - | Pressschweißen | Pressschweißen | Lötmittel | - | - | Crimp / Sonstige | Befestigung mit Schrauben | - | Lötmittel / Pressschweißen | Crimp | Pressschweißen | - | - | - | - | - | Crimp / Pressschweißen / Sonstige | Lötmittel / Crimp | Lötmittel | - | - | Sonstige | Crimp / Befestigung mit Schrauben / Sonstige | Befestigung mit Schrauben | - | - | - | - | - | - | Sonstige | Sonstige | Crimp | Crimp | Lötmittel | Crimp | - | Lötmittel / Pressschweißen | - | Lötmittel / Crimp / Sonstige | Lötmittel / Crimp / Pressschweißen / Sonstige | Crimp | - | - |
| Connection direction | Gerade / Winkel | Gerade | Gerade | Gerade | - | Gerade | Gerade / Winkel | Gerade | - | Gerade / Winkel | Gerade | Gerade | - | Gerade / Sonstige | - | - | - | Gerade / Winkel | Gerade | Gerade | Gerade | - | Gerade | Gerade | Gerade | - | - | - | - | - | - | - | - | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade | - | Gerade |
| Protection function (environmentally resistant) | - | - | - | N/A | Verfügbar | - | - | - | Verfügbar | N/A | - | - | Verfügbar | - | Verfügbar | - | - | - | - | - | - | Verfügbar | - | - | N/A | Verfügbar | - | - | - | - | - | Verfügbar | Verfügbar | - | - | - | - | - | - | - | - | N/A | Verfügbar | Verfügbar | - |
| Representative Standard | - | - | - | - | UL / CUL | - | - | UL / CCC / CSA | - | - | UL / CUL | - | - | - | - | - | - | UL / CSA | - | - | UL | - | UL / CCC / CSA | UL / CUL / CCC / CSA | - | - | - | - | - | - | - | PSE / CE / CCC / CSA | PSE / CE / CCC / CSA | - | - | - | - | UL / TUV / CSA | - | - | - | - | UL / CSA | - | TUV |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Connector Shape
- Quadratisch
- Sonstige
-
A· B· C
- Sonstige
-
D· E· F
-
G·H·I
-
J·K·L
- Sonstige
-
M·N·O
-
P· Q· R
- Sonstige
-
S· T· U
- Sonstige
-
Number
- Sonstige
-
Applicable pin/contact
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- 125
- AC125
- 150
- AC 150
- 160
- 200 VAC
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
-
Connection direction
-
Protection function (environmentally resistant)
-
Representative Standard
Marke
-
- PHOENIX CONTACT (414)
- LAPP (254)
- WAGO (126)
- HARTING (52)
- HIROSE ELECTRONIC (49)
- WEIDMÜLLER (24)
- HIRSCHMANN (22)
- TRU COMPONENTS (21)
- ILME (19)
- ECON CONNECT (15)
- ASSMANN WSW (13)
- MH CONNECTORS (10)
- VOGT VERBINDUNGSTECHNIK (10)
- BKL ELECTRONIC (8)
- HONDA TSUSHIN KOGYO (8)
- FUJIKURA (DDK) (7)
- MOLEX (7)
- BINDER (5)
- CONNFLY (5)
- IFM (5)
- OMRON (5)
- TE CONNECTIVITY (4)
- CONEC (4)
- AMPHENOL ICC (4)
- HELLERMANN TYTON (4)
- EDAC (3)
- FISCHER ELEKTRONIK (3)
- DECA (3)
- UNIVER (2)
- NEUTRIK (2)
- FINDER (2)
- JAPAN AVIATION ELECTRONICS(JAE) (2)
- LUMBERG (1)
- PTR (1)
- FUJITSU COMPONENT (1)
- KEL (1)
- PROVERTHA (1)
- SOURIAU (1)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Rechteckstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.