- Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.
Räder mit Schaft（Type：Flap with shaft）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
ab∗ ： 29.24 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
„Schleifwalze mit Nylon-Schaft“ (Wellendurchmesser: 6 mm)【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· It can be used with both stainless steel and general metals.
· The nylon fiber acts as a cushion to avoid shaving too much off the polished material.
· Abrasive material is adhered to nylon fiber non-woven fabric using a special resin adhesive which provides excellent resistance to chemicals and water, and features superior elasticity.
· Autogenous action constantly generates a new surface so it is difficult to clog and delivers consistent surface roughness of the finished surface from initial grinding through to final.
· Maintains its shape for a long time. Edges also do not chip in a disorderly manner.
[Applications]
· Removing paint and polishing prior to plating. Ideal for polishing of stainless steel, iron, alloys, wood and plastics.
· Tool used: straight grinder. (air + electric)ab∗ ： 42.67 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 47.97 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Ceramic Tip for Finishing【10 Stk. pro Packung】
MISUMI
The resin-bonded grindstone with a WAS shaft conditions the work surface gently, making it ideal for polishing.
- Mengenrabatt
ab∗ ： 14.15 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nano flaps【5 Stk. pro Packung】
MISUMI
The nanoflap is made of micro polymesh, soft sandpaper consisting of super-fine mesh fabric.
The super-fine mesh reduces clogging, improves durability and ensures uniform processing.- Mengenrabatt
ab∗ ： 60.34 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon Shaft Mounted Wheel (Hard)【5 Stk. pro Packung】
MISUMI
Long life. Prevents secondary burr formation. We offer a wide range of grain sizes to make it easy to find the one you're looking for.
- Mengenrabatt
ab∗ ： 20.98 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Flap with Shaft for Polishing Flat, Curved and Inner Surfaces【10 Stk. pro Packung】
MISUMI
Slight clearance between polishing cloths prevents clogging and ensures consistent polishing performance to completion.
Prevents deformation of the work material thanks to superior heat dissipation properties.
Elasticity facilitates polishing of flat, curved and inner surfaces. Corresponds well with work materials.
Excellent self-regenerating properties.ab∗ ： 42.85 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Flap for Polishing Corners and Inner Surfaces【5 Stk. pro Packung】
MISUMI
Made of raw S45C, this polishing material is suited for work on corners and inner surfaces.
- Mengenrabatt
ab∗ ： 49.07 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Flap for Polishing Irregular Surfaces【5 Stk. pro Packung】
MISUMI
Small slits in the cloth facilitate close contact with irregular surfaces to achieve unhindered polishing performance.
- Mengenrabatt
ab∗ ： 49.07 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Flap for Polishing Micro Corners【10 Stk. pro Packung】
MISUMI
This polishing cloth with alundum abrasive grains is ideal for micro corners.
- Mengenrabatt
ab∗ ： 65.43 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Micro Flap【1-10 Stk. pro Packung】
MISUMI
Closely fits the shape of the work material.
Self-regenerating property means polishing with new abrasive surface at all times.
Low thermal transfer prevents distortion and chipping of the workpiece due to heat.- Mengenrabatt
ab∗ ： 18.91 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Polishing Tool: Unilon Wheel with Shaft【5-10 Stk. pro Packung】
MISUMI
Since Union fiber is specially coated with abrasive material, entangled Uniron fiber plays a role of a cushion, preventing excessive scraping.
This product's self-polishing properties prevent clogging and raggedy edges.- Mengenrabatt
ab∗ ： 53.73 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
MISUMI
Can replace flaps with one's fingertips.
Minimum Lieferzeit ： 5 Arbeitstage -
ab∗ ： 74.92 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 61.05 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 38.87 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 55.02 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer【10 Stk. pro Packung】
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners- Mengenrabatt
ab∗ ： 65.78 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle【10 Stk. pro Packung】
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Mengenrabatt
ab∗ ： 49.46 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 45.33 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 44.92 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 38.45 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 46.01 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Nano-Fächerschleifer【5 Stk. pro Packung】
YANASE
There is no clogging due to the ultra-thin mesh structure, allowing for uniform processing.
[Features]
· High grade precision work.
· Nano-flap is a flap made with flexible sandpaper using ultra fine mesh base fabric.
· There is little clogging due to the ultra-thin mesh structure, allowing for uniform processing and a long service life.- Mengenrabatt
ab∗ ： 74.99 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Polierrad (hart)【10 Stk. pro Packung】
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.- Mengenrabatt
ab∗ ： 38.02 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 45.27 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Polierkopf, pilzförmig【5-10 Stk. pro Packung】
YANASE
Prevents overcutting of the workpiece and fits better to rounded surfaces.
[Features]
· Fits snugly due to the mushroom shape.
· Heat dissipation effects are achieved by making an overlapping layer of Unilon non-woven fabric of the same size.
· Further, since the Unilon fibers are compressed closer to the head, the strength is higher than the lower part.
· Tangled Unilon fibers act as a cushion, preventing over-grinding of the materials being abraded.
· Fits better to rounded surfaces.- Mengenrabatt
ab∗ ： 62.59 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit geschlitzter Welle【5-10 Stk. pro Packung】
YANASE
Polishing cloth is finely slit to enable polishing of curved and uneven surfaces.
[Features]
· The slit allows soft polishing.
· The polishing cloth is finely slit, thus ideal for polishing fine parts.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Its autogenous properties help prevent clogging, ensuring uniform polishing throughout.- Mengenrabatt
ab∗ ： 67.09 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Nylon-Rad mit Welle【5-10 Stk. pro Packung】
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.- Mengenrabatt
ab∗ ： 54.22 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 9.85 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 17.70 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 23.02 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer mit Welle, einfach austauschbar【10 Stk. pro Packung】
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment- Mengenrabatt
ab∗ ： 24.43 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 27.68 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 5.51 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 6.60 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 5.53 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 12.39 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
„Polierschleifkörper“ (Wellendurchmesser: 3 mm)【10 Stk. pro Packung】
NAKANISHI
[Features]
· A fiber sander using non-woven nylon fibers.
· Having outstanding flexibility, it softly polishes and finishes flat and curved surfaces without scratching.
· It can be used on a sander to process with the softest touch.
[Applications]
· Can be used to finish everything from general steel to woodwork and plastics.
· Hairline machining or finishing of stainless steel and aluminum.
· Pretreatment for painting or welding, rust and dirt removal.- Mengenrabatt
ab∗ ： 35.20 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Schleifschwamm (Wellendurchmesser: 3 mm)【3 Stk. pro Packung】
NAKANISHI
[Features]
· A sander that uses heavy duty polyester fibers.
· Having outstanding flexibility, it softly polishes flat and curved surfaces alone without scratching.
· Multiporous with almost no clogging. Reduces heat generation on surfaces being treated.
· Heavy duty fibers retain abrasive particles for excellent durability.
[Applications]
· For micro deburring of metal products.
· For repairing rust and scratches as well as light polishing.
· Polishing of stainless steel, copper, brass, aluminum, etc.ab∗ ： 32.45 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
„Weicher laminierter Polierkörper“ (Wellendurchmesser 3 mm)【5-10 Stk. pro Packung】
NAKANISHI
[Features]
· A soft buff that can be fixed to various raw materials with a small diameter flange.
· Final finishing, polishing, dirt removal, etc. can all be done to a gentle finish with the use of a polishing agent.
[Applications]
· Various metals / non-ferrous metals / precious metals / ceramic / glass and other materials can be finished.ab∗ ： 47.35 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
„Mini Fächerschleifer aus Papier“ (Wellendurchmesser: 3 mm)【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end. It has a high heat dissipation effect to prevent distortion of the workpiece. Can be used for any type of polishing, including inner surfaces, curved surfaces, and flat surfaces. The rotational speed can be adjusted to polish (hairline processing possible) everything from soft to hard materials.
[Applications]
· For polishing small irregular shapes, such as semicylindrical interior and corner parts.
· Tool used: micro grinder. (Pneumatic/Electric)ab∗ ： 26.38 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
„Fächerschleifer mit Diamantschaft“ (Volldiamant/Wellendurchmesser: 3 mm)
TRUSCO NAKAYAMA
[Features]
· For glass, stone and non-ferrous metals. Precision finishing can be done with high polishing power.
· Electrodeposited genuine all diamond sheet is used.
[Applications]
· For surface polishing of difficult-to-cut materials, polishing on the inner surface and curved surface.
· Tool used: straight grinder.ab∗ ： 16.74 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Fächerschleifer (Wellendurchmesser: 6 mm)【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For ordinary metals. As the space between the polishing cloths is somewhat open, it causes less clogging and can be used until the end.
· It can be used to polish anything including inner surface, curved surface and flat surface.
· Only the side can be used. As it has a shaft, it can be used flexibly, and the direction of the hairline is constant.
· Fits well onto the shape of the workpiece to be processed.
· Autogenous action enables continuous grinding with new abrasive surfaces constantly formed.
· It has a high heat dissipation effect to prevent distortion of the workpiece.
[Applications]
· Commercially available electric grinder, electric drill, drilling machine, etc.
· Deburring, rust removal, pre-coat polishing, inner-surface and curved-surface polishing, polishing of metal surface.
· Tool used: straight grinder. (Pneumatic/Electric)ab∗ ： 21.64 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
TRUSCO NAKAYAMA
[Features]
· Shaft is screw-in type, so mounting and removing can be done with one touch.
· Shaft can be replaced while chuck is mounted.
· By using a spin shaft (sold separately), shaft length can be changed for standard length (40 mm) and hole depth (100 mm).
[Applications]
· For rust removal, deburring, and brazing.
· Polishing interior of cylinders, corners, etc.
· Tools used: straight grinder (pneumatic/electric) / electric drill / drilling machine.ab∗ ： 23.65 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||
| Warenzeichen | ICHIGUCHI | TRUSCO NAKAYAMA | ICHIGUCHI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | YANASE | ICHIGUCHI | YANASE | YANASE | YANASE | ICHIGUCHI | ICHIGUCHI | ICHIGUCHI | YANASE | NEWREGISTON | MURAKO | MURAKO | MURAKO | MURAKO | NAKANISHI | NAKANISHI | NAKANISHI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Artikelserie | „Schleifwalze mit Nylon-Schaft“ (Wellendurchmesser: 6 mm)【5 Stk. pro Packung】 | Polishing Tool: Flap with Shaft for Polishing Flat, Curved and Inner Surfaces【10 Stk. pro Packung】 | Polishing Tool: Flap for Polishing Corners and Inner Surfaces【5 Stk. pro Packung】 | Polishing Tool: Flap for Polishing Irregular Surfaces【5 Stk. pro Packung】 | Polishing Tool: Flap for Polishing Micro Corners【10 Stk. pro Packung】 | Polishing Tool: Unilon Wheel with Shaft【5-10 Stk. pro Packung】 | Fächerschleifer mit geschlitzter Welle【5-10 Stk. pro Packung】 | Fächerschleifer mit Welle, einfach austauschbar【10 Stk. pro Packung】 | „Fächerschleifer mit Welle“ (keine Metallelemente, Wellendurchmesser 3 mm) | „Fächerschleifer mit Welle“ (keine Metallelemente, Wellendurchmesser 6 mm) | „Fächerschleifer mit Welle“ (keine Metallelemente, Wellendurchmesser 6 mm) | „Filz-Fächerschleifer geschlitzt mit Welle“ (Wellendurchmesser: 6 mm) | „Polierschleifkörper“ (Wellendurchmesser: 3 mm)【10 Stk. pro Packung】 | Schleifschwamm (Wellendurchmesser: 3 mm)【3 Stk. pro Packung】 | „Weicher laminierter Polierkörper“ (Wellendurchmesser 3 mm)【5-10 Stk. pro Packung】 | „Mini Fächerschleifer aus Papier“ (Wellendurchmesser: 3 mm)【5 Stk. pro Packung】 | „Fächerschleifer mit Diamantschaft“ (Volldiamant/Wellendurchmesser: 3 mm) | Fächerschleifer (Wellendurchmesser: 6 mm)【5 Stk. pro Packung】 | |||||||||||||||||||||||||||
| ab∗ | 29.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 42.67 € *Stückpreis Standardkonfiguration | 47.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 60.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 20.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 42.85 € *Stückpreis Standardkonfiguration | 49.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 65.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 53.73 € *Stückpreis Standardkonfiguration Mengenrabatt | - | 74.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 61.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 55.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 65.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 44.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 46.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 74.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 62.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 67.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 54.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 24.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.68 € *Stückpreis Standardkonfiguration | 5.51 € *Stückpreis Standardkonfiguration | 6.60 € *Stückpreis Standardkonfiguration | 5.53 € *Stückpreis Standardkonfiguration | 12.39 € *Stückpreis Standardkonfiguration | 35.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.45 € *Stückpreis Standardkonfiguration | 47.35 € *Stückpreis Standardkonfiguration | 26.38 € *Stückpreis Standardkonfiguration | 16.74 € *Stückpreis Standardkonfiguration | 21.64 € *Stückpreis Standardkonfiguration | 23.65 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 3 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 6 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage |
| Application | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing | Polishing |
| Type | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft | Flap with shaft |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Felt | - | - | Buff | - | - | - | - |
| Outer Diameter(mm) | 25 ～ 100 | 30 ～ 100 | 10 ～ 25 | 6 ～ 22 | 10 ～ 20 | 10 ～ 25 | 25 ～ 80 | 40 ～ 60 | 50 ～ 80 | 10 ～ 30 | 10 ～ 30 | 50 ～ 100 | 10 ～ 50 | 10 ～ 25 | 8 ～ 20 | 30 ～ 100 | 10 ～ 30 | 10 ～ 60 | 10 ～ 30 | 30 ～ 80 | 30 ～ 100 | 10 ～ 80 | 40 ～ 100 | 10 ～ 20 | 10 ～ 25 | 30 ～ 100 | 50 ～ 90 | 50 ～ 100 | 50 ～ 100 | 3 | 10 ～ 20 | 15 ～ 30 | 10 ～ 50 | 25 ～ 80 | 25 ～ 30 | 50 ～ 80 | 25 ～ 40 | 20 ～ 50 | 20 ～ 25 | 20 ～ 30 | 25 ～ 30 | 10 ～ 20 | 10 ～ 15 | 25 ～ 100 | 30 ～ 60 |
| Width(mm) | 5 ～ 30 | 25 | 5 ～ 20 | 3 ～ 20 | 10 | 5 ～ 25 | 25 | 30 ～ 40 | 25 | 20 ～ 25 | 10 ～ 20 | 25 | 5 ～ 25 | 25 ～ 40 | 25 ～ 40 | 25 | - | 20 ～ 40 | 5 ～ 25 | 25 ～ 40 | 25 | - | 25 | 10 | 5 ～ 25 | 25 | 30 ～ 50 | 25 | 25 | 10 ～ 20 | 10 | 10 | 5 ～ 25 | 10 ～ 30 | 5 | 5 ～ 25 | 20 ～ 25 | 20 | 7 ～ 14 | 10 | 6 ～ 14 | 10 ～ 20 | 10 | 10 ～ 30 | 25 |
| Shaft Diameter(mm) | 3 ～ 6 | 6 | 3 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 6 | 6 | 3 ～ 6 | 3 | 6 | - | 6 | - | 6 | 3 | 3 ～ 6 | 3 | 6 | 6 | 3 ～ 6 | 6 | 3 | 3 ～ 6 | 6 | 6 | 6 | 6 | 6 | 3 | 3 | - | 3 ～ 6 | 3 | 6 | 6 | 6 | 3 | 3 | 3 | 3 | 3 | 6 | - |
| Particle Size(#) | 40 ～ 600 | 100 ～ 1000 | 40 ～ 600 | 80 ～ 1000 | 600 (Blue Grain Size 25 µm) ～ 2000 (Pale Blue Grain Size 10 µm) | 120 (Gray) ～ 1500 (Yellow) | 60 ～ 400 | 60 ～ 320 | 60 ～ 320 | 60 ～ 400 | 60 ～ 3000 | 120 ～ 600 | 60 ～ 120 | 60 ～ 180 | 60 ～ 120 | 60 ～ 400 | 60 ～ 1000 | 40 ～ 400 | 40 ～ 600 | 40 ～ 600 | 60 ～ 400 | 60 ～ 400 | 40 ～ 600 | 600 ～ 3000 | 120 ～ 1500 | 60 ～ 1000 | 150 ～ 600 | 40 ～ 400 | 120 ～ 600 | - | 200 ～ 400 | 800 ～ 3000 | 60 ～ 240 | 40 ～ 400 | 40 ～ 400 | 40 ～ 400 | 40 ～ 400 | - | 180 ～ 320 | 120 ～ 400 | - | 60 ～ 600 | 100 ～ 400 | 40 ～ 400 | 40 ～ 400 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 10 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | M3 ～ M6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Konfigurieren
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Application
- Polishing
- Polishing
-
Type
- Flap with shaft
- Band
- Drum
- Paper
- Holder
-
Material
- Cotton
- Sisal
- Flannel
- Buff
- Felt
-
Outer Diameter(mm)
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
- 30
- 36
- 36 Equivalent
- 40
- 60
- 60、80、120
- 60、100、120
- 60,120
- 60、120、150
- 80
- 80、120、180
- 80/120/180/320
- 80、120、220
- 80、120、320
- 100
- 100、150、240
- 100/240/400/800/1500/3000
- 120
- 120 (Gray)
- 120、150、240
- 150
- 180
- 180、240、320
- 180/280
- 200
- 220
- 240
- 240 (Purple)
- 280
- 320
- 320 (Reddish Brown)
- 400
- 500
- 600
- 600 (Green)
- 600 (Blue Grain Size 25 µm)
- 800
- 800 (Navy Blue)
- 800 (Yellow Grain Size 21 µm)
- 1000
- 1000 (Orange)
- 1000 (Red Grain Size 18 µm)
- 1500
- 1500 (Yellow)
- 1500 (Green Grain Size 12 µm)
- 2000
- 2000 (Pale Blue Grain Size 10 µm)
- 3000
- Hard
- Soft
- Super hard
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- ICHIGUCHI (26)
- TRUSCO NAKAYAMA (21)
- YANASE (11)
- SUMFLEX (6)
- MURAKO (4)
- NAKANISHI (3)
- KOYO-SHA (1)
- NIHON SEIMITSU KIKAI KOSAKU (1)
- NEWREGISTON (1)
- H & H (0)
- MINITOR (0)
- EARTH MAN (0)
- PROZONE (0)
- UHT (0)
- PFERD (0)
- DREMEL (0)
- OFFICE MINE (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Räder mit Schaft
-
- DIA/CBN-Schleifscheiben
- Flachschleifscheiben
- Schleifstein-Abrichtwerkzeuge
- Offset-/Flex-Schleifgeräte
- Scheiben
- Polierblätter
- Polierriemen
- Schleifsteine mit Schaft
- DIA/CBN-Stäbe
- Ultrahart-Stäbe
- Räder mit Schaft
- Bürsten mit Schaft
- Topfbürsten
- Handbürsten
- Stift-Schleifsteine
- Feilen
- Abgratwerkzeuge
- Schleifmittel für Schleifgeräte
-
Bezahlverfahren
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.