HOZAN Zangen / Kneifzangen / Pinzetten
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Vornschneider, N-36
HOZAN
Nippers ideal for cutting in deep places.
[Features]
· End component of the nippers has a blade so finish of the cross section is almost flat.
· The thin blade width of 3 mm makes it ideal for densely wired places.
· For cutting in deep places (vertical type).
[Applications]
· Ideal for cutting at dense and deep places.- Mengenrabatt
ab∗ ： 55.32 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kettenzange, P-220
HOZAN
Chain pliers.
[Features]
· Can be used in the removal and installation of roller chain clips used in production machinery and bicycles, etc.
· It has a magnet to prevent clips from falling during work.
· Firmly grasps a clip by the steps and grooves at the tip.
· Suitable chains: roller chains (clip style).
[Applications]
· Ideal for attaching/removing clips.- Mengenrabatt
ab∗ ： 28.96 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Kettenzange (2-Wege-Spitze)
HOZAN
Clip joint (fitting piece) removal/attachment pliers for clip type roller chains, a 2 way type which can also be used on the side.
[Features]
· Supports a wide variety of uses, from production machine chains to chains on bicycles and motorized 2-wheel vehicles.
· Daily maintenance is made simpler with these pliers specifically designed for chains.
· P-221, which can also be used on the side, allows installing and removing of the chain in narrow places.
· The steps and V-shaped grooves securely hold a clip, suppressing sliding in the lateral direction and enabling reliable work.
· When removing or attaching the clip, there is no need to worry about whether to hook the step to the clip or pin.
· The tips of pliers have magnets to prevent the removed clip from getting lost.
[Applications]
· For attachment and detachment of roller chain clips of industrial machinery, bicycles, etc.- Mengenrabatt
ab∗ ： 32.34 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralfeder, P-36-1 / 37-1
HOZAN
Replacement coil spring dedicated for miniature long-nose pliers.- Mengenrabatt
ab∗ ： 4.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zange, P-211Z
HOZAN
Pliers that firmly grasp various objects.
[Features]
· Available in 2 types (P-211Z-150/P-211Z-200) according to the size.- Mengenrabatt
ab∗ ： 27.39 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schwere Schere, N-838
HOZAN
Scissors for cutting thin aluminum plates and copper wires.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Cutting capacity (copper stranded wire): 2 mm2.
· Aluminum plate thickness: 0.5 mm.
· Hardness HRC (blade) of 59.
[Applications]
· Ideal for cutting thin films and paper.- Mengenrabatt
ab∗ ： 30.81 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitzzange, P-15-125 / P-15-150
HOZAN
Compact general-purpose pliers.
[Features]
· Elastomer grip adopted to reduce fatigue during continuous work.
· It has been given a knurling treatment which bites into the workpiece and prevents slippage.
· Highly versatile.
· Lineup of the same shape without spring (P-15 Series) and with spring (P-14 Series) is available.
[Applications]
· Firmly holds the target object.
· The blade has HRC58 hardness capable of cutting φ2.6 (diameter 2.6 mm) copper wire and 2 mm² copper stranded wire.- Mengenrabatt
ab∗ ： 29.57 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spiralfeder, N-21 / N-31 / N-32【10 Stk. pro Packung】
HOZAN
Replacement coil spring for use with various nippers, etc.
[Features]
· Excellent durability and recoverability and does not cause fatigue during continuous work.
[Applications]
· Ideal for replacement parts for nippers.- Mengenrabatt
ab∗ ： 4.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zange, P-43-150 / P-43-175
HOZAN
[Features]
· Available in 2 types (P-43-150/P-43-175) according to the size.
· Recommended for the Electrical Worker Proficiency Test.
· With cutter.
[Applications]
· Convenient when it is necessary to firmly grasp various objects.- Mengenrabatt
ab∗ ： 28.82 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Seitenschneider, N-34
HOZAN
Copper and other soft wire dedicated nippers that place emphasis on the cutting surface finish.
[Features]
· Compact size of about 100 mm total length that fits in the palm of a woman.
· Ideal for precision work with a sense of size that makes rotation easy to control.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· Has thin and flat blades that can do side cutting with little protrusion of the binding band, and can be used to work without injuring the hands.
· The handle is soft to grip and has anti-static (ESD) specifications that allow it to be used even in an electronic environment without any concerns.
· Adopts a coil spring with excellent durability and recoverability, and allows fatigue-free work even when constantly holding the tool.
[Applications]
· Ideal for cutting zip ties and thin copper wires, or precision work.ab∗ ： 39.36 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Spitzzange, P-35
HOZAN
Small-mouth long nose pliers that are suitable for precision work in which fine bending and grabbing of small objects are necessary.
[Features]
· The width of the tip is only 0.6 mm, making it as thin as tweezers.
· Since the gripper at the tip is not knurled (serrated), it will not scratch the gripped objects.
· Compact size of 116 mm total length that fits in the palm of a woman.
· Chamfering of sharp projections of the rotating part reduces accidental injuries and promotes safe work.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Anti-static (ESD) specification soft grip for safe work with electronics.
[Applications]
· Besides lead bending of electronic parts, this is also ideal for precision work such as accessory manufacturing and wire crafts.- Mengenrabatt
ab∗ ： 34.75 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Spitzzange, P-36
HOZAN
Miniature long-nose pliers with anti-slip knurling.
[Features]
· Knurled to enhance the retention force.
· Hardness HRC: 46.
· Weight: 65 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Miniature longnose pliers.- Mengenrabatt
ab∗ ： 28.45 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Seitenschneider, N-16
HOZAN
A useful wire cutter for cutting wire.
[Features]
· Wire can be cut cleanly without loosening its braid.
[Applications]
· Convenient for cutting braided wires.- Mengenrabatt
ab∗ ： 43.06 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Gebogene Spitzzange
HOZAN
Longnose pliers with curved tips that are suitable for narrow spaces and precision work.
[Features]
· The elastomer grip makes it ideal for working for extended periods.
· The tip of the longnose pliers is not only thin but is bent at 60 degrees.
[Applications]
· Ideal for detailed work and work in places where parts are densely concentrated.
· Curved tip type that is ideal for precision work in deep and narrow places.- Mengenrabatt
ab∗ ： 34.92 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schrägzange, N-4
HOZAN
Angled finishing nippers with great sharpness.
[Features]
· Sharp and easy-to-use angled blade that's suitable for cutting copper wires.
[Applications]
· Ideal for vertical cutting of parallel lines.- Mengenrabatt
ab∗ ： 37.30 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Seitenschneider, N-32
HOZAN
Small nippers suitable for precision work.
[Features]
· Compact size of 130 mm total length that fits in the palm. It provides excellent maneuverability and ease of use.
· Small body convenient for cutting binding bands in a limited space.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· The cut end of the binding band is less likely to jump out, thus preventing hand injuries.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
[Applications]
· Ideal for cutting soft wires such as copper.- Mengenrabatt
ab∗ ： 36.09 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Seitenschneider, N-35
HOZAN
Miniature nippers with an anti-static grip to enable use at electronics sites.
[Features]
· Anti-static (ESD) specification elastomer grip for the handle.
· Adopts a coil spring with excellent durability and recoverability, and does not cause fatigue even when constantly holding the tool.
· For cutting copper wire (thin blade finish).
· The cutting edge is made sharp (shallow angle) to achieve light handling of the handle and excellent sharpness.
[Applications]
· Convenient for cutting copper wire.- Mengenrabatt
ab∗ ： 37.15 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Spitzzange, P-37
HOZAN
Miniature longnose pliers.
[Features]
· Not knurled.
· Hardness HRC: 46.
· Weight: 60 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for narrow and deep spots.
· The grip part is elongated, making it convenient for work in narrow and deep areas.- Mengenrabatt
ab∗ ： 34.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Kabelzange, P-34
HOZAN
Wide/thin type pliers.
[Features]
· Not knurled.
· Hardness HRC: 42.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 10^12 Ω.
[Applications]
· Ideal for extraction and folding.- Mengenrabatt
ab∗ ： 34.70 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Präzisionsseitenschneider, N-58
HOZAN
Highly durable precision nippers with lead stoppers included.
[Features]
· A semi-flush cut type.
· Cutting capacity (copper wire): 0.18 to 0.8 mm diameter (lead stopper effective range).
· Hardness HRC: Body/46.
· Blade: 60.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 1012 Ω.
[Applications]
· Ideal for cutting the leads of resistors, capacitors, etc.- Mengenrabatt
ab∗ ： 4.82 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Vornschneider, N-33
HOZAN
Nippers with a long blade length.
[Features]
· Equipped with coil spring to prevent fatigue even during continuous work.
· As the blade is long, it is possible to cut 4 wires coming out of a modular jack at once.
[Applications]
· Ideal for cutting in deep places (slanted type).- Mengenrabatt
ab∗ ： 43.46 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kabelschneider, N-18
HOZAN
Cable cutter that helps keep the workpiece in place while cutting.
[Features]
· Even 22 mm² IV wires can be cut lightly and cleanly using one hand.
· Cutting capacity (VVF wire): φ2.0 mm (diameter 2.0 mm) x 2 cores.- Mengenrabatt
ab∗ ： 45.04 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Seitenschneider, N-12
HOZAN
Nippers with a sliding part that adopts a round Tyco type to enable heavy duty cutting.
[Features]
· Copper wire: 3.2 mm diameter, copper wire: 3.5 mm², iron wire: 1.9 mm diameter, VVF: 1.6 mm diameter x 2 cores.
· Round rubberized sliding portion capable of powerful cutting.
[Applications]
· Powerful type with round rubberized-type grip, ideal for cutting copper wires and iron wires.- Mengenrabatt
ab∗ ： 34.27 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Seitenschneider, N-9-125 / N-9-150
HOZAN
Nipper of professional grade that combines usability and durability.
[Features]
· Has a strip hole that supports the use of thick wires.
· Two sizes are available (N-9-125/N-9-150).
· Elastomer is used for the grip.
· The elastomer grip feels great to touch and is recommended for extended periods of use.
[Applications]
· Convenient when working with thick wires.- Mengenrabatt
ab∗ ： 36.68 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zange, P-57
HOZAN
Practical type pliers boasting excellent cutting force and durability.
[Features]
· Smooth to touch elastomer grip is used for the handle.
· Recommended product for the Electrical Worker Proficiency Test.
[Applications]
· Ideal for various types of manual work.- Mengenrabatt
ab∗ ： 43.06 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Multi-Schere, N-839
HOZAN
A multi-snip tool that can cut thin plates of aluminum plate in addition to VVR.
[Features]
· Cutting capacity (VCT wire): 3.5 mm2 x 4 cores.
· VVR wire: 3.5 mm2 x 3-cores.
· Aluminum plate: 1.2 mm.
· Copper stranded wire: 8 mm2.
· Hardness HRC (blade): 58.
[Applications]
· Ideal for cutting and stripping thick wires.- Mengenrabatt
ab∗ ： 38.38 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Seitenschneider, N-31
HOZAN
Small nippers with a total length of 100 mm to fit the hand for easy use, suitable for precision work.
[Features]
· Cutting edge with emphasis on the cut surface finish for soft wires such as copper wire.
· Small body convenient for cutting binding bands in a limited space.
· Because it is a curved blade that can do side cutting, the band protrudes very little, with consideration given to safety for the fingers.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
· Anti-static (ESD) specification carbon-free elastomer grip for safe work with electronics.
· Adopts a coil spring with excellent durability and recoverability, reducing fatigue during long-term work.
[Applications]
· The small body makes it convenient for cutting work in limited spaces.- Mengenrabatt
ab∗ ： 35.76 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Miniatur-Rundzange, P-39
HOZAN
Round mouth type pliers that do not hurt the workpiece.
[Features]
· Not knurled.
· Gripping parts are rounded so the target object can be held without causing damage.
[Applications]
· Ideal for various types of manual work.- Mengenrabatt
ab∗ ： 35.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitzzange, P-22
HOZAN
High-grade longnose pliers with a fine tip and polished finish.
[Features]
· The tip is more tapered than P-15 and has been polished for high-quality finish.
· With anti-slip knurling.
[Applications]
· Ideal for various types of manual work.- Mengenrabatt
ab∗ ： 37.69 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Kabelzange, P-16
HOZAN
Lead pliers that firmly hold the target object.
[Features]
· The tip is wide and slim for excellent stability.
· Not knurled.
[Applications]
· Ideal for various types of manual work.- Mengenrabatt
ab∗ ： 34.92 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schrägzange (mit Loch) , N-5
HOZAN
Oblique blade type nippers with a strip hole.
[Features]
· With hole for N-4 wire strip.
[Applications]
· Ideal for vertical cutting of parallel lines.- Mengenrabatt
ab∗ ： 38.24 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Präzisionsseitenschneider, N-55
HOZAN
Nipper with a high-precision finish achieved via a combination of high-durability material and precision machining.
[Features]
· HOZAN's precision series made of alloy steel molded in precision grinding with toughness and hardness used for cutting tools.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· The machined handle portion has been thinned down to 1.7 mm, opens and closes smoothly, and features improved durability.
· Provides high toughness to the inner material hidden by the grip with an electrostatic discharge (ESD) specification.
· The precision set pin provides a box joint structure with fewer backlashes and smooth sliding part.
· Produces a full flush cut with only a single line, without burrs on the cut cross section.
[Applications]
· Optimal for work in narrow places with its fine blade size.- Mengenrabatt
ab∗ ： 90.93 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Präzisionszange, P-51
HOZAN
Pliers that catch fine copper wire firmly at the tip, with a diameter of 0.08 mm.
[Features]
· High-precision finish suitable for precision work. Not knurled.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· Cuts the surface more flatly.
· Steady handle opening/closing is achieved by the high-precision set pin.
· Opening and closing the handle creates no gap between sliding surfaces; even if loosening occurs in sliding surfaces, it can be adjusted easily.
· A box joint structure with no rattling when opening/closing the handle. Sustains good cutting quality.
[Applications]
· The tip is thin finished with high-precision and optimal for precise operations.- Mengenrabatt
ab∗ ： 93.26 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schwere Schere (Gezahnt) , N-841
HOZAN
Heavy-snippers that have wear-resistance improved by about 60% compared to conventional models.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Also suitable for cutting aramid fibers used for optical fiber cables, etc.
[Applications]
· Ideal for cutting thin aluminum plates or copper wires.- Mengenrabatt
ab∗ ： 33.63 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitzzange, P-14【1-10 Stk. pro Packung】
HOZAN
Compact general-purpose pliers.
[Features]
· Coil spring device and elastomer grip adopted to reduce fatigue during continuous work.
· Anti-slip knurling helps to hold the workpiece firmly.
· The blade has HRC58 hardness capable of cutting 2.6 mmφ (diameter 2.6 mm) copper wire and 2 mm2 copper stranded wire.
[Applications]
· Convenient for cutting copper wire, etc. General purpose type.- Mengenrabatt
ab∗ ： 3.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Seitenschneider, N-23【1-10 Stk. pro Packung】
HOZAN
Nippers that come equipped with a coil spring to prevent fatigue even during continuous work.
[Features]
· Uses an elastomer grip which is soft on the hands.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Long blade length.
· Can be used to cut the wires coming out of the modular jack at once.
· Not too long and not too short to be a size that feels just right.
[Applications]
· Cutting wiring cords, etc.- Mengenrabatt
ab∗ ： 3.44 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
VVF Pinzette, P-59-175
HOZAN
Joint blade type pliers that can cut VVF cable 2.0 mm x 3 cores with ease.
[Features]
· A cutting blade for binding wires is attached at the base of the blade.
* Cut the iron binding wire with the cutting blade dedicated for binding wires.
* Cutting with other sections may damage the blade.
· Recommended product for the Electrical Worker Proficiency Test.
· Elastomer grip.
[Applications]
· Ideal for various types of manual work.- Mengenrabatt
ab∗ ： 70.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Dickenmesser, P-919
HOZAN
A strip gauge that allows stripping at the same length each time by pressing the wire against the backing plate.
[Features]
· Strippable length: 1-16 mm (with graduations in 1 mm increments).
· With a strip scrap expelling function and strip hole position guide.
· By setting a hole to be used for the strip and attaching the strip hole position guide, electric wires can be smoothly set.
[Applications]
· Mountable Product Number: P-960/963/967/968.
· Ideal for standard stripping work.- Mengenrabatt
ab∗ ： 15.70 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Seitenschneider für Zange N-25
HOZAN
[Merkmale]
· Zum Schneiden und Entgraten von Angüssen.
· Angüsse beim Spritzgießen von Kunststoffartikeln. Ideal zum Schneiden und Entgraten.- Mengenrabatt
ab∗ ： 49.02 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Artikelserie | |||||||||||||||||||||||||||||||||||||||
| ab∗ | 55.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 30.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 29.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.82 € *Stückpreis Standardkonfiguration Mengenrabatt | 39.36 € *Stückpreis Standardkonfiguration | 34.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 43.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 36.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.82 € *Stückpreis Standardkonfiguration Mengenrabatt | 43.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 36.68 € *Stückpreis Standardkonfiguration Mengenrabatt | 43.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.69 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 90.93 € *Stückpreis Standardkonfiguration Mengenrabatt | 93.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 33.63 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 70.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.02 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 8 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 8 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage |
| Product Category | Kneifzangen | Zangen | Zangen | Teile | Zangen | Kneifzangen | Zangen | Teile | Zangen | Kneifzangen | Zangen | Zangen | - | Zangen | Kneifzangen | Kneifzangen | Kneifzangen | Zangen | Zangen | Kneifzangen / Teile | Kneifzangen | - | Kneifzangen | Kneifzangen | Zangen | Kneifzangen | Kneifzangen | Zangen | Zangen | Zangen | Kneifzangen | Kneifzangen | Zangen | Kneifzangen | Zangen / Teile | Kneifzangen / Teile | Zangen | Teile | Kneifzangen |
| Plier Type | - | Zangen | Zangen | - | Zangen | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Zangen | - | - | - | - | - | - |
| Plier Type | - | - | - | - | - | - | Zangen mit langen Backen | - | Zangen | - | Zangen mit langen Backen | Zangen mit langen Backen | - | Zangen mit langen Backen | - | - | - | Zangen mit langen Backen | Plombierzangen | - | - | - | - | - | Zangen | - | - | Zangen | Zangen mit langen Backen | Plombierzangen | - | - | - | - | Zangen mit langen Backen | - | Zangen | - | - |
| Nipper Type | Kneifzangen | - | - | - | - | Kneifzangen | - | - | - | Kneifzangen | - | - | - | - | Kneifzangen | Kneifzangen | Kneifzangen | - | - | Kneifzangen | Kneifzangen | - | Kneifzangen | Kneifzangen | - | Kneifzangen | Kneifzangen | - | - | - | Kneifzangen | Kneifzangen | - | Kneifzangen | - | Kneifzangen | - | - | Kneifzangen |
| Overall Length(mm) | 117.5 | 165 | 165 | - | 168 ～ 206 | 162 | 150 ～ 163 | - | 163 ～ 188 | 102.5 | 116 | 125.5 | 200 | 159 | 133 ～ 158 | 128.5 | 128.5 | 138 | 116 | 105 | 116 | 161 | 163 | 135 ～ 152.5 | 195 ～ 220 | 190 | 102.5 | 118 | 163 | 159 | 133 ～ 158 | 105 | 125 | 160 | 150 ～ 163 | 133 | 201.5 | - | 132,5 |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | Verfügbar | N/A | - | - | N/A | N/A | N/A | - | N/A | Verfügbar | Verfügbar | Verfügbar | - | N/A | N/A | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | Verfügbar | - | N/A | N/A | N/A | Verfügbar | Verfügbar | Verfügbar | N/A | N/A | N/A | Verfügbar | N/A | - | Verfügbar | Verfügbar | - | - | Verfügbar |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 5 | - | 1.2 ～ 1.4 | - | - | - | - | - | - | - | 1.9 | 1.6 ～ 1.9 | - | - | - | - | - | - | 1.2 ～ 1.4 | - | - | - | - | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | 1 | - | - | - | - | - | 2.6 | - | 3.3 ～ 3.5 | 1 | - | - | - | - | 2 ～ 2.6 | 2 | 1.6 | - | - | 0.18～0.8 | 1 | - | 3.2 | 2.6 ～ 3.2 | 3.5 ～ 4 | - | 1.6 | - | 2.6 | - | 2 ～ 2.6 | 1 | - | - | 2.6 | 1.6 | 2.6 | - | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5,0 |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | 1.6 x 2 core ～ 1.6 x 3 core | - | - | - | - | - | - | - | - | - | - | - | - | 2.0 x 2 core | 1.6 x 2 core | - | 1.6 x 3 core ～ 2.0 × 3 core | - | - | - | - | - | - | - | - | - | - | - | 2.0 × 3 core | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | Feder | - | - | - | Feder | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Feder | Feder | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Product Category
-
Plier Type
- Zangen
- Zange für Sicherungsringe
-
Plier Type
-
Nipper Type
- Kneifzangen
- Wärmekneifzange
-
Overall Length(mm)
- 36
- 46
- 92
- 100
- 102.5
- 105
- 108
- 110
- 111.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 123
- 124
- 125
- 125.5
- 126
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132,5
- 133
- 134
- 135
- 136
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 151
- 152
- 152.5
- 153
- 154
- 155
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 170
- 171
- 172
- 174
- 175
- 178
- 180
- 181
- 183
- 185
- 186
- 188
- 190
- 192
- 195
- 197
- 199
- 200
- Approx. 200
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 214.5
- 215
- 217
- 219
- 220
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 240
- 242
- 245
- 250
- 266
- Approximately 275
- 280
- 282
- Approximately 285
- 290
- 293
- 297
- 300
- 305
- 310
- 320
- 400
- 455
- 570
- 600
-
Shaft/hole
- Für Schaft
- Für Bohrung
- Verwendung mit Schaft und Bohrung
-
With or without Spring
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
- 0.10～0.60
- 0.1～0.80
- 0.1 to 1.00
- 0.18～0.8
- 0.20～0.80
- 0.8
- 1
- 1.2
- Tip blade: 1.2 or less, Side blade: 1.2 or less
- 1.5
- 1.6
- 2
- 2.3
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.3
- 3.5
- 3.6
- 4
- 4.5
- 8.0
- 14
- -
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
- 1
- 1.5
- 2
- 3
- 4
- 5
- 5,0
- 8
- 9
- 10
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
- 1.6 x 2 core
- 1.6・2・2.6
- 1.6 x 3 core
- 1.6X3 core
- 1.6×3
- 2.0 x 2 core
- 2 x 3 core
- 2.0 × 3 core
- 2.0X3 core
- 2X3 core
- 2.0 x 4 Kern
- 2.6 x 3 core
- 2.6X3 core
-
With/without tip claw replacement function
- Verfügbar
- N/A
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Klingenspitze
- Feder
- Zange mit Schnappringspitze
Suchergebnisse durch Herstellerauswahl einschränken
-
- KNIPEX (89)
- WIHA (67)
- MUROMOTO TEKKO (63)
- HOZAN (39)
- PHOENIX CONTACT (26)
- TRUSCO NAKAYAMA (21)
- ENGINEER (20)
- FUJIYA (20)
- KTC(KYOTO TOOL) (20)
- TSUNODA (17)
- KEIBA (12)
- LOBTEX (12)
- THREE PEAKS GIKEN (11)
- BAHCO (9)
- BERNSTEIN AG (9)
- SMATO (9)
- MAEDAKINNZOKU (9)
- WEIDMÜLLER (7)
- IGARASHI PLIERS (6)
- SIGNET (6)
- E VALUE (4)
- LINDSTROM (4)
- FACOM (4)
- GEDORE (3)
- CIMCO (3)
- HANAZONO TOOL (3)
- HAZET (3)
- NWS (3)
- NEPROS (2)
- RENNSTEIG (2)
- RITTAL (2)
- ANEX (1)
- AS ONE (1)
- WOLFCRAFT (1)
- H & H (1)
- M & M (1)
- ONISHI MANUFACTURING (1)
- SK 11 (1)
- TRAD (1)
- WELLER (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Zangen / Kneifzangen / Pinzetten
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Werkzeuge für Elektroanlagen
- Werkzeug-Sets/Werkzeugkästen
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.