SHINOHARA ELECTRIC Lüftungsschlitze

?* Informationen zur Lieferzeit und Preisen

• 

  Kleiner Lüftungsschlitz (für geschlossene Räume)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  2D CAD Daten verfügbar

  ab∗ ：	28.52 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Lüftungsschlitz für variablen Einsatz (Ausführung FAG) 1P x 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  ab∗ ：	120.35 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einbau-Lüftungsschlitz (fließwasserdicht) , IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  2D CAD Daten verfügbar

  ab∗ ：	167.45 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lüftungsschlitz mit Haube (zur Verwendung im Freien: Ausführung FG) , IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  2D CAD Daten verfügbar

  ab∗ ：	114.96 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lüftungsschlitz (salzbeständige Spezifikation) IP4X

  SHINOHARA ELECTRIC

  Use as a ventilation component of a switchboard installed in IP4X coastal areas, etc.

  2D CAD Daten verfügbar

  ab∗ ：	519.32 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fließwasserdichter Lüftungsschlitz (zur Eindämmung von Salzschäden) IP55

  SHINOHARA ELECTRIC

  A ventilation component for a switchboard installed in IP55 coastal areas.
  
  [Features]
  - Low pressure loss (approximately half that of conventional products).
  - Efficiently collects sea salt particles.
  - Long lifespan (more than twice that of conventional products).
  - Even if collected sea salt particles deliquesce from the filter, the pressure loss increases only a little.
  - Deliquesced sea salt particles flow out downstream, ensuring minimal re-entrainment.
  - Superior impact resistance.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	586.50 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fließwasserdichter Lüftungsschlitz (Kunststoffabdeckung) , IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  2D CAD Daten verfügbar

  ab∗ ：	119.08 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lüftungsschlitz mit Lüfter (Edelstahl) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  ab∗ ：	336.78 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Lüftungsschlitz, Serie PC

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  2D CAD Daten verfügbar

  ab∗ ：	14.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lüftungsschlitz zur Verhinderung von Windeinfall, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	149.99 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...