TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

TE CONNECTIVITY Nylon-Steckverbinder

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

Lieferzeit	Alle Produkte Versand am selben Tag 5 Tage oder weniger 6 Tage oder weniger 7 Tage oder weniger 9 Tage oder weniger 10 Tage oder weniger 13 Tage oder weniger 22 Tage oder weniger 24 Tage oder weniger 37 Tage oder weniger

?* Informationen zur Lieferzeit und Preisen

Sonderpreis
Empfehlung

Serie D3000

TE CONNECTIVITY

The D-3000 series, compatible with a wide range of dynamic main series sizes.

[Features]
· Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
· Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
· Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
· High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
· Newly developed copper alloy material realized with a reliable 3-point contact construction.
· Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
· Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	0.38 €
	Besonderer Preis
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Mini-Universal-Mate-N-Lok-Steckverbinder

Mini-Universal-Mate-N-Lok-Steckverbinder【1-20 Stk. pro Packung】

TE CONNECTIVITY

Small connector that facilitates high density wiring inside equipment.

Mengenrabatt

ab^∗ ：	0.56 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Sonderpreis

Universal-Mate-N-Lok-Steckverbinder

TE CONNECTIVITY

Universal Mate-N-Lok connector is designed to be more robust to withstand high voltages.
[Features]
·Infinite keying combinations possible.
·Pins and sockets can be used in the same housing.
·Housing locks securely and pins and sockets are useable in power supply wiring.
·UL and CSA standard compliant.
[Applications]
·Computers, office equipment, home-use gaming equipment, electric appliances, vending machines and other commercial equipment.

Mengenrabatt

ab^∗ ：	0.34 €
	Besonderer Preis
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

MATE-N-LOK-Steckverbinder für Starkstrom

TE CONNECTIVITY

These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.

[Features]
• These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.

Mengenrabatt

ab^∗ ：	1.21 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Serie D4000

TE CONNECTIVITY

The D4000 series is optimal for 20A commercial power supply line use.

[Features]
• Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
• This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
• Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
• Long tab was developed for sequential connection use with tab contacts.
• By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
• High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
• Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
• Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
• Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	1.03 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Serie D5000

TE CONNECTIVITY

A D-5000 Series connector for use with equipment main power supply lines.

[Features]
· High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
· By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
· The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
· The contacts can be selected to match the application.
· Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
· The long tab was developed for sequential coupling of tab contacts.
· By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
· High current tines (lead): This type of tine (lead) mounts to a circuit board.
· A newly developed twin lead type.
· This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
· IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
· By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	1.14 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Serie D1000

TE CONNECTIVITY

The D-1000 Series are the smallest connectors within the Dynamic Series range.

[Features]
[Supports a wide range of wires]
· This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
[Crimp tool with interchangeable dies]
· The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
[A full Series lineup]
· The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
· The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
· The Series lineup includes different color versions in addition to the previous standard black color.
· In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
· The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
· Contact options support an extensive range of uses based on application, quality, and cost considerations.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	0.44 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Serie D2000

TE CONNECTIVITY

The D-2000 Series remains small while satisfying specifications for industrial equipment.

[Features]
Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
· Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
· Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
· Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
· Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
· Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	0.57 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Handelsüblicher Mate-N-Lok-Steckverbinder

TE CONNECTIVITY

Small, lightweight connector that can increase precision of equipment.

Mengenrabatt

ab^∗ ：	0.30 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Dynamisches HTS-Modul

TE CONNECTIVITY

[Features]
· The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
· All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	3.04 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Grace Inertia-Steckverbinder (Grace Inertia Connector, GIC)

TE CONNECTIVITY

These are Grace Inertia connectors.

[Features]
· Designed to achieve a secure connection. These connectors utilize a structure that simultaneously achieves coupling, continuity, and connector locking.
· These connectors are used in a wide range of large electrical products, such as large home appliances and vending machines, etc., as a solution for eliminating human error during assembly.
· Incomplete couplings are visually difficult to detect and can present problems during testing processes.
· This product utilizes a lock-on mechanism that prevents continuity if the coupling is incomplete.
· Product defects caused by incomplete coupling are prevented by conducting incomplete-coupling and continuity testing simultaneously.
· The 2.0-mm and 2.5-mm pitch connectors are also available with gold-plated contacts.
· These products prevent connection failure during prolonged use, such as whiskering and micro-sliding wear, and contribute to improving the task of coupling.
· A lineup of 2.5-mm, 3.5-mm and 6.2-mm pitch relay connectors is also available.
· These connectors are also usable for a wide variety of high-current applications.
· The 2.0-mm and 2.5 mm-pitch products share some of the contacts.
· The 2.5-mm, 3.5-mm, 6.5-mm, 7.92-mm, and 12.4-mm pitch products are available in four different keying features.
· UL / CSA

Mengenrabatt

ab^∗ ：	16.07 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration


Warenzeichen
Artikelserie
CAD
ab^∗
Minimum Lieferzeit ：
Steckerform
A· B· C
D· E· F
G·H·I
J·K·L
M·N·O
P· Q· R
S· T· U
V· W· X
Y und Z
Katakana
Anzahl
paßender Sift / Kontakt
Anzahl der Adern
Anwendung
Zulässiger Strom(A)
Zulässige Spannung(V)
Verdrahtungsverfahren
Anschlussrichtung
Schutzfunktion (umweltbeständig)
Repräsentativer Standard

	Sonderpreis Empfehlung		Sonderpreis
Warenzeichen	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY	TE CONNECTIVITY
Artikelserie	Serie D3000	Mini-Universal-Mate-N-Lok-Steckverbinder【1-20 Stk. pro Packung】	Universal-Mate-N-Lok-Steckverbinder	MATE-N-LOK-Steckverbinder für Starkstrom	Serie D4000	Serie D5000	Serie D1000	Serie D2000	Handelsüblicher Mate-N-Lok-Steckverbinder	Dynamisches HTS-Modul	Grace Inertia-Steckverbinder (Grace Inertia Connector, GIC)
CAD	2D				2D	2D	2D	2D		2D
ab^∗	0.38 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis Mengenrabatt	0.56 € *Stückpreis Standardkonfiguration Mengenrabatt	0.34 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis Mengenrabatt	1.21 € *Stückpreis Standardkonfiguration Mengenrabatt	1.03 € *Stückpreis Standardkonfiguration Mengenrabatt	1.14 € *Stückpreis Standardkonfiguration Mengenrabatt	0.44 € *Stückpreis Standardkonfiguration Mengenrabatt	0.57 € *Stückpreis Standardkonfiguration Mengenrabatt	0.30 € *Stückpreis Standardkonfiguration Mengenrabatt	3.04 € *Stückpreis Standardkonfiguration Mengenrabatt	16.07 € *Stückpreis Standardkonfiguration Mengenrabatt
Minimum Lieferzeit ：	Versand am selben Tag	5 Arbeitstage	Versand am selben Tag	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	Versand am selben Tag	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage
Steckerform	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch	Quadratisch
A· B· C	-	-	-	-	-	-	-	-	-	-	-
D· E· F	-	-	-	-	-	-	-	-	-	-	-
G·H·I	-	-	-	-	-	-	-	-	-	-	-
J·K·L	-	-	-	-	-	-	-	-	-	-	-
M·N·O	-	-	-	-	-	-	-	-	-	-	-
P· Q· R	-	-	-	-	-	-	-	-	-	-	-
S· T· U	-	-	-	-	-	-	-	-	-	-	-
V· W· X	-	-	-	-	-	-	-	-	-	-	-
Y und Z	-	-	-	-	-	-	-	-	-	-	-
Katakana	Dynamisch	Mini-Universal Mate-N-Lok	Universal Mate-N-Lok	Sonstige	Dynamisch	Dynamisch	Dynamisch	Dynamisch	Handelsübliches MATE-N-LOK	Dynamisch	Sonstige
Anzahl	-	-	-	-	-	-	-	-	-	-	-
paßender Sift / Kontakt	Stecker (Stecker) / Buchse (Buchse)	Kombination mit Stecker/Buchse	Stecker (Stecker) / Buchse (Buchse) / Kombination mit Stecker/Buchse	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Stecker (Stecker) / Buchse (Buchse)	Sonstige
Anzahl der Adern	2 ～ 24	1 ～ 15	1 ～ 15	3	2 ～ 4	2 ～ 12	2 ～ 40	3 ～ 50	1 ～ 15	4 ～ 12	4
Anwendung	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Kabelanschluss / Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen	Kabelanschluss / Für Leiterplatten / Plattenmontagen / Sonstige	Kabelanschluss	Kabelanschluss
Zulässiger Strom(A)	15	7	10	25	-	30	3 ～ 5	2.6 ～ 5	10	15 ～ 40	2.5
Zulässige Spannung(V)	250 ～ 600	300	500	250	600	630	125 ～ 250	250	250	600 ～ 630	50
Verdrahtungsverfahren	-	Crimp	Lötmittel / Crimp	Crimp	Lötmittel / Crimp	Lötmittel / Crimp	Lötmittel / Crimp / Befestigung mit Schrauben	Lötmittel / Crimp	Lötmittel / Crimp	Crimp	Crimp
Anschlussrichtung	Gerade / Winkel	Gerade	Gerade / Winkel	Gerade	Gerade	Gerade / Winkel	Gerade / Winkel	Gerade / Winkel	Gerade	Gerade	Gerade
Schutzfunktion (umweltbeständig)	N/A	N/A	Verfügbar / N/A	-	N/A	Verfügbar / N/A	N/A	N/A	N/A	-	-
Repräsentativer Standard	UL / CSA	UL / CSA	UL / CSA	UL	UL / CSA	UL / CSA	UL / CSA	UL / CSA	UL / CSA	UL / CSA	UL / CSA

Filtern nach:

Stock

- Stock Items Included
Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Steckerform
- Rund
- Quadratisch
- Sonstige
Zurücksetzen

A· B· C
- Sonstige
Zurücksetzen

D· E· F
- EH
- EL
Zurücksetzen

G·H·I
- Sonstige
- GH
Zurücksetzen

J·K·L
- Sonstige
Zurücksetzen

M·N·O
- N
- NH
- Sonstige
Zurücksetzen

P· Q· R
- PH
- Sonstige
- PHD
- PUD
Zurücksetzen

S· T· U
- SM
- SH
Zurücksetzen

V· W· X
- XH
- VH
- Sonstige
Zurücksetzen

Y und Z
- Sonstige
- ZH
Zurücksetzen

Katakana
- Dynamisch
- Handelsübliches MATE-N-LOK
- Mini-Universal Mate-N-Lok
- Universal Mate-N-Lok
- Sonstige
Zurücksetzen

Anzahl
- 1625
- Sonstige
Zurücksetzen

paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Kombination mit Stecker/Buchse
- Sonstige
Zurücksetzen

Anzahl der Adern
1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

18

20

22

24

26

28

30

32

34

36

38

40

50
Zurücksetzen

Anwendung
- Kabelanschluss
- Für Leiterplatten
- Platine-zu-Platine
- Plattenmontagen
- Sonstige
Zurücksetzen

Zulässiger Strom(A)
0.5

1

AC/DC 1

1,0

2

AC / DC 2

2.5

2.6

3

AC / DC 3

AC/DC 3

3 A max. / 1-polig

AC / DC 3 (5)

AC / DC 3 (6)

4

AC / DC 4

AC / DC 4 (6)

AC / DC 4 (7)

5

AC / DC 5 (8)

5.5

6

AC/DC6

AC / DC 6 (9)

7

AC / DC 7

AC / DC 7 (10)

8

AC / DC 8

9

9,5

9.5

10

AC / DC 10

11

12

14

15

AC/DC15

16

20

22

25

30

32

40

50
Zurücksetzen

Zulässige Spannung(V)
14

30

DC 32

50

AC/DC 50

100

AC / DC 100

125

150

250

250 V AC/DC

AC/DC 250

300

AC / DC 300

320

400

500

600

630
Zurücksetzen

Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
Zurücksetzen

Anschlussrichtung
- Gerade
- Winkel
- Sonstige
Zurücksetzen

Schutzfunktion (umweltbeständig)
- Verfügbar
- N/A
Zurücksetzen

Repräsentativer Standard
- PSE
- CE
- UL
- CUL
- TUV
- CSA
Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

- MOLEX (80)
- WAGO (33)
- JST (14)
- TE CONNECTIVITY (11)
- NICHIFU TERMINAL INDUSTRIES (3)
- WEIDMÜLLER (2)
- OHM ELECTRIC (1)
- SATO PARTS (1)
- SOURIAU (0)
- TRUSCO NAKAYAMA (0)
- SUMIKO TEC (0)
- IFM (0)
- SUNHAYATO (0)
- OMRON (0)
Zurücksetzen