?* Informationen zur Lieferzeit
LM-Führung, Voll-Kugel-Ausführung, Separat (Radiale Ausführung), GSR
THK
Separate type. Suited to spaces where space saving in the height direction is required or mounting accurately is difficult. Suited to spaces which require radial direction rigidity.
Minimum Lieferzeit : | auf Anfrage |
---|
LM-Führung, Voll-Kugel-Ausführung, Miniatur-Kreuzführung, MX-Ausführung
THK
Cross shape has an identical interior structure to RSR. RSR units, the LM guide full-ball type is more compact and provides higher rigidity and precision.
[Features]
· LM rails and LM blocks feature four high accuracy grinding machined line rolling surfaces that balls roll on, and the ball lines are circulated by the end plate, which is embedded in an LM block.
· The miniature LM guide RSR shape is a combination two-rail model with the intersection on the back side.
· With just the MX shape, this is an orthogonal direct acting system with extremely low height, providing compact performance that doesn't require a conventional saddle.
· Provides 4-direction loading with the same rating as an LM block for the four directions (radial, reversed radial, and sideways).
Minimum Lieferzeit : | auf Anfrage |
---|
LM-Kreuzführung, LM-Führung, SCR-Ausführung mit Kugelkäfig
THK
A cross type with the same internal structure as the SHS. More compact and provides higher rigidity and precision than a combination of two of SHS.
[Features]
· The balls roll along the four precision machined raceways on the LM rail and LM block. The ball array is circulated via the end plate which is embedded into the ball retainer and LM block.
· An integrated LM guide consisting of two LM rails. Features the same internal structure as the proven SHS type caged (in ball retainer) LM guide. Intersects in a cross shaped on rear surface.
· Becomes an orthogonal linear motion system with just the SCR type, so no conventional saddles are required. The structure of X-Y motion has been simplified, and it is possible to make it more compact.
· 4-direction load, LM block operation
Minimum Lieferzeit : | auf Anfrage |
---|
LM-Führung, Voll-Kugel-Ausführung, Separat (Radiale Ausführung), GSR-R
THK
This type includes a rack. By fitting a rack to the LM rail, drive mechanism design and mounting are easier than before.
Minimum Lieferzeit : | auf Anfrage |
---|
Gegenüber der Kombination von zwei LM-Kreuzführungen, CSR
THK
Cross shape has an identical interior structure to HSR. HSR units, the LM guide full-ball type is more compact and provides higher rigidity and precision.
Minimum Lieferzeit : | auf Anfrage |
---|
ab∗ : | 69.08 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Modell |
Blockform |
Führungsschienenausführung |
Schienenbreite(mm) |
Höhe der Montagefläche H(mm) |
Anzahl der Führungswagen |
Werkstoff |
Schienenlänge L(mm) |
Vorspannung |
Präzision |
Nenn-Teilenummer |
Kugelausrichtung |
Käfig |
Warenzeichen | THK | THK | THK | THK | THK | INA |
---|---|---|---|---|---|---|
Artikelserie | LM-Führung, Voll-Kugel-Ausführung, Separat (Radiale Ausführung), GSR | LM-Führung, Voll-Kugel-Ausführung, Miniatur-Kreuzführung, MX-Ausführung | LM-Führung, Voll-Kugel-Ausführung, Separat (Radiale Ausführung), GSR-R | |||
CAD |
|
|
|
|
| |
ab∗ | - | - | - | - | - | 69.08 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage | 4 Arbeitstage |
Modell | Geteilt | Kreuzführung | Kreuzführung | Geteilt | Kreuzführung | - |
Blockform | Standard | Standard / Breit | Standard | Standard | Standard | - |
Führungsschienenausführung | Standard | Standard / Breite Ausführung | Standard | Standard | Standard | - |
Schienenbreite(mm) | 15 ~ 34 | 5 ~ 14 | 15 ~ 63 | 44.91 ~ 60.18 | 15 ~ 45 | - |
Höhe der Montagefläche H(mm) | 20 ~ 38 | 10 ~ 14.5 | 47 ~ 180 | 30 ~ 38 | 47 ~ 118 | - |
Anzahl der Führungswagen | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | - |
Werkstoff | Kohlenstoffstahl | Rostfreier Stahl | Kohlenstoffstahl | Kohlenstoffstahl | Kohlenstoffstahl | - |
Schienenlänge L(mm) | 54 ~ 3000 | - | 71 ~ 2500 | 82 ~ 2004 | 70 ~ 3090 | - |
Vorspannung | - | Standard / Leichte Vorspannung | Standard / Leichte Vorspannung / Mittlere Vorspannung | - | Standard / Leichte Vorspannung / Mittlere Vorspannung | - |
Präzision | Standardqualität / Hohe Qualität / Präzisionsklasse | Standardqualität / Präzisionsklasse | Präzisionsklasse / Hohe Präzisionsklasse / Extra-Superpräzisionsklasse | Standardqualität / Hohe Qualität | Präzisionsklasse / Hohe Präzisionsklasse / Extra-Superpräzisionsklasse | - |
Nenn-Teilenummer | 15 ~ 35 | 5 ~ 7W | 15 ~ 65 | 25 ~ 35 | 15 ~ 45 | - |
Kugelausrichtung | 2-reihig kreisförmig | Standard | 4-Reihen kreisförmig | 2-reihig kreisförmig | 4-Reihen kreisförmig | - |
Käfig | N/A | N/A | Mitgeliefert | N/A | N/A | - |
Loading...
Bei Druckstück sind Führungswagen und Schiene aus demselben Werkstoff.
[54-3090/1mmTeile]
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.