Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Minimum Lieferzeit : | 5 Arbeitstage |
---|
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 15 Wellendurchmesser, Blei 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
ab∗ : | 819.19 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 25 Wellendurchmesser, Blei 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
ab∗ : | 1,460.49 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
ab∗ : | 537.00 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 15 Wellendurchmesser, Blei 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
ab∗ : | 808.70 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 20 Wellendurchmesser, Blei 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
ab∗ : | 1,007.32 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 14 Wellendurchmesser, Blei 8
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
ab∗ : | 818.71 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endbearbeitung (Modell BNK) Wellendurchmesser 10, Führung 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
ab∗ : | 1,038.07 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 20 Wellendurchmesser, Blei 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
ab∗ : | 834.57 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endbearbeitung (Modell BNK) Wellendurchmesser 12, Führung 5
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover the screw shafts.
· BNK Type: Dimensions Table—A15-116 Standardized ball screw with a screw shaft diameter of 4 to 25 mm, and lead of 1 to 20 mm.
ab∗ : | 581.47 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 16 Wellendurchmesser, Blei 16
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.
ab∗ : | 887.59 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Artikelausführung |
Ausführung mit Flansch |
Präzisionskategorie |
Schraubenschaft-Außen-Ø d(Ø) |
Steigung(mm) |
Warenzeichen | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Kugelgewindetriebe/Geschliffen/Gewinde-Ø 12/Steigung 2/4/5/10/Präzisionskl. C3/C5 oder C7 | Kugelgewindetriebe/Geschliffen/Wellen-Ø 6 oder 8/Steigung 1 oder 2 | Kugelgewindetriebe/Geschliffen/Gewinde-Ø 15/Steigung 5/10/20/40/Präzisionskl. C3/C5/C7 | Kugelgewindetriebe/Geschliffen/Gewinde-Ø 25/Steigung 5/10/20/Präzisionskl. C5 oder C7 | Kugelgewindetriebe/Geschliffen/Gewinde-Ø 20/Steigung 5/10/20/40/Präzisionskl. C5 oder C7 | Kugelgewindetriebe/Geschliffen/Gewinde-Ø 10/Steigung 2/4/10/Präzisionskl. C3/C5 oder C7 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 15 Wellendurchmesser, Blei 10 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 25 Wellendurchmesser, Blei 20 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 15 Wellendurchmesser, Blei 20 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 20 Wellendurchmesser, Blei 20 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 14 Wellendurchmesser, Blei 8 | Präzisions-Kugelgewindetriebe mit Endbearbeitung (Modell BNK) Wellendurchmesser 10, Führung 10 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 20 Wellendurchmesser, Blei 10 | Präzisions-Kugelgewindetriebe mit Endbearbeitung (Modell BNK) Wellendurchmesser 12, Führung 5 | Präzisions-Kugelgewindetriebe mit Endenbearbeitung (Modell BNK) 16 Wellendurchmesser, Blei 16 | |
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ab∗ | - | - | - | - | - | - | 819.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 1,460.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 537.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 808.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 1,007.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 818.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 1,038.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 834.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 581.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 887.59 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
Artikelausführung | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe | Präzisions-Kugelgewindetriebe |
Ausführung mit Flansch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
Präzisionskategorie | C3 / C5 / C7 | C3 / C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C3 / C5 / C7 | C5 / C7 | C5 / C7 | C5 / C7 | C5 / C7 | C5 / C7 | C3 / C5 / C7 | C5 / C7 |
Schraubenschaft-Außen-Ø d(Ø) | 12 | 8 | 15 | 25 | 20 | 10 | 15 | 25 | 10 | 15 | 20 | 14 | 10 | 20 | 12 | 16 |
Steigung(mm) | 2 ~ 10 | 2 | 5 ~ 20 | 5 ~ 20 | 5 ~ 20 | 2 ~ 10 | 10 | 20 | 4 | 20 | 20 | 8 | 10 | 10 | 5 | 16 |
Loading...
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.