Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Drehriegel, Flügelgriff einseitig
HALDER
Zur Verriegelung von Türen, Schubladen sowie als Transporthilfe usw. einsetzbar.
Der Drehriegel ist 4 x 90° rastbar.
ab∗ : | 8.48 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kunststoff-Doppelgriff, Ausführung mit Druckknopf, AP-871
TAKIGEN
[Features]
· Lock has a reversible key and a dust-proof shutter.
· Lightweight handle, ideal for shutters, etc.
ab∗ : | 28.02 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Schieber-Klemme-Verschluss C-939
TAKIGEN
[Features]
· Can be locked/unlocked in one action.
· Can be locked with a padlock.
· Rust prevention treatment
ab∗ : | 19.21 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Integrated structure of lock and handle.
· Lock has a reversible key and a dust-proof shutter.
· Flat type with few protrusions on door surface
ab∗ : | 64.96 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Bündiger Griff, Kontrollzentrum A-873-1C
TAKIGEN
[Features]
· Remote operation of locking device is possible using rod or wire.
· Lock has a reversible key and a dust-proof shutter.
· Flat type with few protrusions
ab∗ : | 94.61 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Push bolt position is adjustable
ab∗ : | 30.27 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
HALDER
Zur Verriegelung von Türen, Schubladen sowie als Transporthilfe usw. einsetzbar.
Der Drehriegel ist 4 x 90° rastbar.
ab∗ : | 12.55 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Wasserdichter Edelstahl-Kleiner Befestiger C-1414
TAKIGEN
[Features]
· Slider is fitted with double O-rings and the end part of the fastener is taper cut and finished with nylon coating in order to suppress metal powder generation due to friction, and ensure smooth opening and closing.
· Made of all stainless steel with superior corrosion resistance.
· Waterproof structure (using double O rings and sheet packing. Protection grade IPX6).
· Available in hexagonal bar wrench type C-1414-1 and knob type C-1414-2
ab∗ : | 32.30 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Schieber für Nocken-Schloss C-315
TAKIGEN
[Features]
· Turning the knob slides the stopper plate horizontally for locking.
· Indicator shows locking/unlocking at a glance.
· Easy installation with a clip (nut stopper can also be used CP-315 nut)
ab∗ : | 8.05 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kunststoff-Harz Handgriff für Schiebetüren, AP-889
TAKIGEN
[Features]
· Soft to the touch.
· There is a finger hook for closing the door, with smooth operation.
· Ideal for small sliding doors.
· For both left hand and right hand use
ab∗ : | 22.93 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
Drucktaster Ein-Griff-Ausführung A-870
TAKIGEN
[Features]
· Lock has a reversible key and a dust-proof shutter.
· A-871 (for large-sized doors) to achieve unification of design by combination
ab∗ : | 41.26 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· (A-866-1) Inner handle connecting ø4 rods.
· Easy to install.
· (A-866-2) Inner handle that connects ø3.5 rods
ab∗ : | 22.93 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 11.54 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Improved operability in a soft, curved design. Left hand and right hand use (the drawing shows right hand only).
ab∗ : | 3.87 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Cattle-Modell Eingelassener Griff A-111
TAKIGEN
[Features]
· Ideal for doors which are required to be airtight.
· Waterproof type (O ring used).
· Adjustable screw allows fine adjustment of grip.
· Excellent corrosion resistance.
Easy installation
ab∗ : | 38.85 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kunststoff-Schiebe-Hebelschloss CP-315
TAKIGEN
Turning the knob slides the stopper plate horizontally to lock it.
The airtight type moves 4 mm when the knob is pulled. Shield effects can be obtained.
[Features]
· Indicator shows whether it is locked or unlocked at a glance.
· Easy installation with a clip (nut stopper can also be used, CP-315 nut).
· CP-315-E: vibration-proof type (hold down locking / unlocking by tilting the lever).
· Easy to operate with large collapsible lever.
· Soft design that has few protrusions and can fit any housing.
ab∗ : | 4.02 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Acrylic resin baking provides excellent corrosion resistance.
· Aluminum made to be lightweight.
· Since the hook is on both sides you can hold the sliding door open.
· For both left hand and right hand use
ab∗ : | 97.11 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 6.36 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 21.81 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kunststoff eingelassener Griff AP-883
TAKIGEN
[Features]
· Remote operation of locking device is possible using rod or wire.
· Lock has a reversible key and a dust-proof shutter.
· Flat type with few protrusions.
· The lightening of weight can be measured as it is made from resin
ab∗ : | 42.71 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· This handle adapts to every door; lift doors, sliding doors, opening doors, etc.
· Large and easy to operate.
· Remote operation of locking device is possible using rod.
· Lock has a reversible key and a dust-proof shutter.
· For left hand or right hand use
ab∗ : | 68.67 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Push the button in the direction of the arrow and it will move 5.5 mm
ab∗ : | 15.94 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Drucktaster Modell mit doppeltem Griff A-871
TAKIGEN
[Features]
· Lock has a reversible key and a dust-proof shutter.
· Link device (C-871-2-S) combination enables one-touch open and close.
· Open and close the door with both hands.
· Push type control center C-871 (P.1128) can be combined
ab∗ : | 47.28 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Verriegelungsverschluss für kleine Kisten C-839
TAKIGEN
[Features]
· Flat type with few protrusions from the door surface.
· Left and right combination
ab∗ : | 17.16 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
HALDER
Zur Verriegelung von Türen, Schubladen sowie als Transporthilfe usw. einsetzbar.
Der Drehriegel ist 4 x 90° rastbar.
ab∗ : | 13.91 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Rotate the handle lever to obtain a rod stroke of 32 mm.
· Multi-point tightening is possible.
· In order to attach the handle to the outside of the packing, it is not necessary to apply caulking, etc. to the handle mounting part when waterproofing is required.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment.
· Left and right dual use type (it is possible by turning over the gearbox)
ab∗ : | 108.24 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Flat plastic handle with few projections.
· Integrated structure of inner handle and inner lock.
· Can be installed with 1 screw
ab∗ : | 11.48 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Due to its round design it has a soft appearance.
Waterproof structure that can be used with any door.
· Lock has a reversible key and a dust-proof shutter.
· Left and right combination
ab∗ : | 39.00 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Klappgriff mit Schutzring, A-417-F
TAKIGEN
[Features]
· Japan Vending Machine Industry Association standard locks can be incorporated.
· Reinforce the cylinder part with a hardened guard ring.
· Protects from drill and other damages.
· Can protect important parts inside the handle.
· Prevents damage and unlocking by forced rotation of the lock.
· Prevention mechanism for forcibly picking the lock.
· Reliable locking by the double latch mechanism.
· Lock can be easily replaced with 1 Phillips screwdriver.
· One action lock activated just by pushing the handle.
· Use personal coin lock (C-288) for the standard lock.
· Left/Right combination type.
ab∗ : | 56.30 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Cattle-Modell Eingelassener Griff A-222
TAKIGEN
[Features]
· Ideal for doors required to be airtight.
· Waterproof type (O ring used).
· Fine adjustment of grip position is possible by adjusting the screw.
· Excellent corrosion resistance.
· Easy installation.
· Coin lock type is also available. (A-222-2)
ab∗ : | 53.83 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Flat type with few projections from the door surface.
· Remote operation of locking device is possible using rod or wire.
· For right / left use.
· A-885-1-1 is only for left side (-L)
ab∗ : | 33.43 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Since it is a pull-turn mechanism, the locked state is maintained, which prevents natural opening due to vibration, etc.
· Detent effect makes the lock click, so you can tell it is locked (A-56-A).
· Embedded type, with neat board surface (A-56-B)
ab∗ : | 15.01 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
· The mounting plate is smaller than conventional products.
· The protrusion from the door surface is a thin 17 mm.
· Lock has a reversible key and a dust-proof shutter
ab∗ : | 58.78 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
Side-Lift-Ausführung, zur Flächenmontage, Cremorne-Bolzen, A-328
TAKIGEN
[Features]
· Easy to install surface attachment type.
· Maintenance is very easy compared with digging type.
· Strong seal with upper and lower rods.
· It is thin with a height of about 45 mm from the mounting surface.
· For left or right opening use
ab∗ : | 62.49 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· High security lock TAK70, and TAK80 can be incorporated.
· Made of stainless steel, corrosion resistant.
· Front attaching type can be installed easily.
· Strongly sealed with 2 points (A-1376-2A), or 3 points (A-1376-3A).
Rainproof, dust-proof type (using lock cap, O ring).
· Standard setting opens to the right.
· Please specify when using to open to the left
ab∗ : | 654.88 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
Behältergriff aus Edelstahl FA-1810
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Left and right combination
ab∗ : | 94.61 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Behältergriff aus Edelstahl FA-1811N
TAKIGEN
[Features]
· Conventional product FA-810 small type.
· The handle, plate etc. were changed from cast iron to stainless steel.
· Made of stainless steel, corrosion resistant.
· Left and right combination
ab∗ : | 102.05 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Behältergriff aus Edelstahl FA-1820
TAKIGEN
[Features]
· Ideal for opening and closing medium, small size doors.
· The hook and keeper are made by forging and are highly resistant to impact.
· The handle bracket has a rotation prevention mechanism.
· Rotation is smooth since the pipe guide has built-in resin bearings.
· Made of stainless steel, corrosion resistant.
· Left and right combination
ab∗ : | 225.63 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 179.77 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 58.78 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Conventional product FA-810 small type.
· The handle, plate etc. were changed from cast iron to stainless steel.
· Left and right combination
ab∗ : | 48.89 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl Doppelsichelgriff A-1293
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Since the hook is on both sides you can hold the sliding door open.
· Left and right combination
ab∗ : | 108.31 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 108.05 € |
---|---|
Minimum Lieferzeit : | 50 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· Three way operation unlocking to prevent trouble.
· Operation is also possible with a flat head screwdriver.
· Left and right combination
ab∗ : | 77.32 € |
---|---|
Minimum Lieferzeit : | 22 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· High security lock TAK80 is standard equipment.
· Pull the handle lever to get a rod stroke of 18 mm.
· Based on the mounting position of the handle, outside and inside can be set.
· Use B-1071-3D (B-71-3D) for the hinge.
· Striker has mounting compatibility with the recommended hinge B-1071-3D, and the door opening can be rearranged as desired.
· Multi-point tightening is possible.
· Right and left dual use type (change between left and right by inverting the striker)
ab∗ : | 152.87 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Spezifikationen |
Warenzeichen | HALDER | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | HALDER | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | HALDER | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Side-Lift-Ausführung, zur Flächenmontage, Cremorne-Bolzen, A-328 | ||||||||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
ab∗ | 8.48 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.21 € *Stückpreis Standardkonfiguration | 64.96 € *Stückpreis Standardkonfiguration | 94.61 € *Stückpreis Standardkonfiguration | 30.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.93 € *Stückpreis Standardkonfiguration | 41.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.93 € *Stückpreis Standardkonfiguration | 11.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 97.11 € *Stückpreis Standardkonfiguration | 6.36 € *Stückpreis Standardkonfiguration | 21.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 42.71 € *Stückpreis Standardkonfiguration | 68.67 € *Stückpreis Standardkonfiguration | 15.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 47.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 108.24 € *Stückpreis Standardkonfiguration | 11.48 € *Stückpreis Standardkonfiguration | 39.00 € *Stückpreis Standardkonfiguration | 56.30 € *Stückpreis Standardkonfiguration | 53.83 € *Stückpreis Standardkonfiguration | 33.43 € *Stückpreis Standardkonfiguration | 15.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 58.78 € *Stückpreis Standardkonfiguration | 62.49 € *Stückpreis Standardkonfiguration | 654.88 € *Stückpreis Standardkonfiguration | 94.61 € *Stückpreis Standardkonfiguration | 102.05 € *Stückpreis Standardkonfiguration | 225.63 € *Stückpreis Standardkonfiguration | 179.77 € *Stückpreis Standardkonfiguration | 58.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 48.89 € *Stückpreis Standardkonfiguration | 108.31 € *Stückpreis Standardkonfiguration | 108.05 € *Stückpreis Standardkonfiguration | 77.32 € *Stückpreis Standardkonfiguration | 152.87 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 10 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | 10 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 10 Arbeitstage | Versand am selben Tag | 10 Arbeitstage | 9 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 9 Arbeitstage | 50 Arbeitstage | 22 Arbeitstage | 9 Arbeitstage |
Spezifikationen |
|
|
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.