Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
ab∗ : | 1.11 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
ab∗ : | 2.33 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
ab∗ : | 0.40 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 0.93 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
A general purpose insert. Low cost and well balanced.
ab∗ : | 0.13 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing
ab∗ : | 0.29 € |
---|---|
Minimum Lieferzeit : | 27 Arbeitstage |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
ab∗ : | 0.26 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 27.30 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.
ab∗ : | 0.18 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
ab∗ : | 1.13 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
ab∗ : | 0.94 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
ab∗ : | 1.09 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
ab∗ : | 0.84 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
ab∗ : | 0.51 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
ab∗ : | 0.40 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8
ab∗ : | 0.26 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.
ab∗ : | 19.44 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
ab∗ : | 0.31 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 81.90 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 147.86 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.
ab∗ : | 0.95 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6
ab∗ : | 64.52 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SUNCO
[Nominal M] 16
[Material] Stainless Steel
[Surface Processing] None
ab∗ : | 17.90 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 90.77 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 1.70 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.
ab∗ : | 1.22 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate
ab∗ : | 0.76 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
NIPPON SPREW
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
ab∗ : | 0.46 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
ab∗ : | 0.49 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).
ab∗ : | 0.92 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
JAPAN DRIVE-IT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2
ab∗ : | 0.26 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 21.50 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SEL JAPAN
Able to obtain high retention force. Reduces work hours and costs drastically, and eliminates pitching shift during assembly.
ab∗ : | 1.31 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
NIPPON SPREW
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
ab∗ : | 0.75 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
NIPPON SPREW
This SPREW has enhanced locking characteristics. The central portion of the SPREW coil is formed from several windings of angular grips. The spring action of the grips keeps male screws firmly tightened, and prevents looseness caused by strong impacts or shocks.
ab∗ : | 0.62 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
ab∗ : | 0.38 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.
ab∗ : | 0.15 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
· Type: Threaded insert use
· Application: Light metal
· Materials: SUS304
· Thread type: Coarse with notch
· Sales unit: Available individually starting from quantities of 1
· Thread diameter after insertion (mm): 3, 4, 5, 6, 8, 10
· Length after insertion (D = screw diameter M): 0.5D, 0.8D
ab∗ : | 1.38 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
RECOIL
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
ab∗ : | 1.13 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
ab∗ : | 0.40 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D
ab∗ : | 0.34 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
[Material] Stainless Steel
[Thread Size M] 2.5 2.6 3 4 5 6 8 10 12 14 16 18 20 22 24 27 30 33 36
ab∗ : | 0.50 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 22.75 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 67.11 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TSUGAMI
A general insertion tool that even a beginning can use to perform easy insertion.
ab∗ : | 48.90 € |
---|---|
Minimum Lieferzeit : | 14 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Spezifikationen |
Ausführung |
Anwendung |
Werkstoff |
Mit Schraube |
Schrauben-Ø M (nach Einsatz)(mm) |
Gewindedurchmesser (Nach dem Einsetzen), einheitlich(Zoll) |
Länge L (nach Einsatz) (D = Gewinde-Ø M). |
Kerbe |
Modell |
Verkaufseinheit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
Warenzeichen | MISUMI | RECOIL | KKV | MISUMI | TOKAI METAL INDUSTRY | HIROSUGI-KEIKI | TOKAI METAL INDUSTRY | MISUMI | TOKAI METAL INDUSTRY | KKV | KKV | RECOIL | KKV | KKV | KKV | JAPAN DRIVE-IT | RECOIL | RECOIL | MISUMI | MISUMI | RECOIL | KKV | SUNCO | MISUMI | MISUMI | SEL JAPAN | KKV | NIPPON SPREW | RECOIL | RECOIL | JAPAN DRIVE-IT | MISUMI | SEL JAPAN | NIPPON SPREW | NIPPON SPREW | TOKAI METAL INDUSTRY | TOKAI METAL INDUSTRY | RECOIL | RECOIL | KKV | JAPAN DRIVE-IT | SUNCO | MISUMI | MISUMI | TSUGAMI |
Artikelserie | Installations-/Demontagewerkzeuge für Gewindeeinsätze ohne Mitnehmer | Installationswerkzeug für manuelle Verarbeitung 610-Ausführung | Ensat Ausführung mit erweitertem Schlitz, Modell 302, Zoll-Ausführung. | Werkzeug zum Herausbrechen des Mitnehmers von Gewindeeinsätzen | Dodge-Bit-Einsätze (Standard), SBZ-Modell (doppelseitige Verarbeitung), Messing (Cadmium-frei) | Messing, Ensat, Schraube Kunststoffverformung, Ausführung 305 | |||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
ab∗ | 1.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.40 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.93 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.13 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.13 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.94 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.09 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.84 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.51 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.26 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 19.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.31 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 81.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 147.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.95 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 64.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.90 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 90.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.70 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.76 € *Stückpreis Standardkonfiguration | 0.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.49 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.92 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.31 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.75 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.38 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.15 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.38 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.13 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 67.11 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 48.90 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 27 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 14 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 14 Arbeitstage | 14 Arbeitstage | 14 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 14 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 14 Arbeitstage | 14 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 14 Arbeitstage |
Spezifikationen |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
Ausführung | Selbstschneidendes Gewinde | Standard | Selbstschneidendes Gewinde | Standard | Standard | Presspassung | Standard | Werkzeug | Standard | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Standard | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Selbstschneidendes Gewinde | Presspassung | Werkzeug | Standard | Werkzeug | Werkzeug | Ohne Mitnehmer | Werkzeug | Selbstschneidendes Gewinde | Werkzeug | Ohne Mitnehmer | Eingepresst | Selbstschneidendes Gewinde | Standard | Standard | Standard | Presspassung | Werkzeug | Eingepresst | Standard | Standard | Standard | Standard | Standard | Standard | Selbstschneidendes Gewinde | Presspassung | Standard | Werkzeug | Werkzeug | Werkzeug |
Anwendung | Leichtmetall | Leichtmetall | - | Leichtmetall | Kunststoff, allgemein | Leichtmetall | Kunststoff, allgemein | - | Kunststoff, allgemein | - | - | Leichtmetall | - | - | - | - | - | Leichtmetall | - | - | Leichtmetall | - | - | - | Leichtmetall | Leichtmetall | - | Leichtmetall | Leichtmetall | Leichtmetall | Kunststoff, allgemein | - | Leichtmetall | Leichtmetall | Leichtmetall | Kunststoff, allgemein | Kunststoff, allgemein | Leichtmetall | Leichtmetall | - | - | - | - | - | - |
Werkstoff | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Nitrox 60 | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Rostfreier Stahl (EN 1.4104 Äquiv.) / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | Messing | - | Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Rostfreier Stahl (EN 1.4104 Äquiv.) | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Rostfreier Stahl (EN 1.4104 Äquiv.) | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Rostfreier Stahl (EN 1.4104 Äquiv.) | Stahl | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Messing | - | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | - | - | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Stahl | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | - | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Stahl | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Phosphorbronze | Rostfreier Stahl (EN 1.4401 Äquiv.) | Phosphorbronze | Messing | - | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. | - | - | Stahl |
Mit Schraube | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) / Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | - | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Unified Thread (Regel) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | - | Metrisches Gewinde (Regel-) | - | - | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Fein-) | - | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Unified Thread (Regel) / BSW-Gewinde (Regelgewinde) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | - | Metrisches Gewinde (Regel-) | Unified Thread (Regel) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Unified Thread (Fein) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | Metrisches Gewinde (Regel-) | - | - | Metrisches Gewinde (Regel-) |
Schrauben-Ø M (nach Einsatz)(mm) | 3 ~ 12 | 3 ~ 12 | 2.5 ~ 30 | 3 ~ 16 | 1.6 ~ 8 | 3 | 2 ~ 8 | - | 2 ~ 8 | 3 ~ 16 | 3 ~ 16 | - | 3 ~ 16 | 3 ~ 10 | 3 ~ 16 | 2 ~ 10 | 2 ~ 20 | 2 ~ 42 | - | - | 2.5 ~ 12 | 2.5 ~ 16 | 16 | - | 2.5 ~ 10 | 4 | - | 2 ~ 24 | 3 ~ 16 | 3 ~ 24 | 2 ~ 6 | - | 3 ~ 4 | - | 4 ~ 10 | 2.6 ~ 6 | 1.4 ~ 5 | 3 ~ 10 | - | 3 ~ 6 | 2 ~ 8 | 3 ~ 30 | - | - | 3 ~ 10 |
Gewindedurchmesser (Nach dem Einsetzen), einheitlich(Zoll) | - | - | - | - | - | - | - | - | - | - | - | 1"-8 ~ #12-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ~ Nr. 10 | - | - | - | - | - | - | 1/2-13 ~ #10-24 | - | - | - | - | 1"-12 ~ #12-28 | - | - | - | - | - | - |
Länge L (nach Einsatz) (D = Gewinde-Ø M). | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D / 2.5D / 3D | 1.5D | 1D / 1.5D / 2D / 2.5D / 3D | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D | - | - | - | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D | - | - | - | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 2.5D | 0.5D / 0.8D | 1D / 1.5D / 2D | - | 1.5D / 2D | 1D / 1.5D / 2D | - | - | - |
Kerbe | Nicht im Lieferumfang | Mitgeliefert | - | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | - | Nicht im Lieferumfang | - | - | Mitgeliefert | - | - | - | Nicht im Lieferumfang | - | Mitgeliefert | - | - | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | - | Nicht im Lieferumfang | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Mitgeliefert | Mitgeliefert | Nicht im Lieferumfang | - | Nicht im Lieferumfang | Mitgeliefert | Mitgeliefert | Nicht im Lieferumfang | Nicht im Lieferumfang | Mitgeliefert | Mitgeliefert | - | Nicht im Lieferumfang | Mitgeliefert | - | - | - |
Modell | Langloch | - | Langloch | - | Standard | Standard | Standard | - | Standard | mit 3 Bohrungen | mit 3 Bohrungen | - | Ausführung ohne Spitze | Kleiner Außen-Ø, Ausführung mit Langloch | Standard | Standard | - | - | - | - | - | - | mit 3 Bohrungen | - | - | - | Langloch | - | - | - | Standard | - | - | - | - | Standard | Standard | - | - | Standard | Standard | - | - | - | - |
Verkaufseinheit | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) | Kleine Mengen (Verfügbar ab 1 Stk.) |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.