Lieferzeit |
|
---|
?* Informationen zur Lieferzeit und Preisen
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Steigert Ihre Effizienz: Beste Rundlaufeigenschaften für stabile Schraubprozesse.
Steigert Ihre Effizienz: Beste Zugänglichkeit zu tiefliegenden Schrauben durch extra lange 70 mm Bits.
Antrieb: DIN 3126, ISO 1173, Form E 6,3.
Anwendung: Für Verschraubungen an Plus-Minus Schrauben in Schaltschranksystemen, Sicherungskästen, Klemmleisten sowie Relais.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form E6,3
Inhalt:
ab∗ : | 10.12 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 9.51 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Extra: Konisches Profil.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 2.30 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Gehäuse: Praktische und robuste Kunststoffbox.
Bithalter: Universalhalter, magnetisch.
Bits: 25 mm Standard-Bits.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 29.74 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 2.99 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bitaufnahme: Nur für 6 mm slimBits.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 4.85 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Konus an der Spitze erleichtert das Einstecken in die Schraube.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 4.88 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Die universellen Bits für ein breites Anwendungsspektrum.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Normen: DIN ISO 8764-1
Verpackung: Praktischer Pappkarton. Kann als Schütte benutzt werden.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 21.78 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bitaufnahme: Nur für 6 mm slimBits.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 2.76 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Sicherheitsschrauben - Snake Eye.
Bits: Reduziertes, überdrehtes Profil.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 2.90 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 4.85 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Normen: DIN ISO 8764-1
Verpackung: Wiederverschließbare Kunststoffbox.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 39.68 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 9.12 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Präzisionsgefrästes Profil für höchste Passgenauigkeit - hochwertiger Stahl vermindert den Verschleiß und steigert die Lebensdauer.
Vereinfacht Ihre Arbeit: Kontrastreiche Lasermarkierung zur leichten Identifikation der Profilgröße auf dem Bit.
Senkt Ihre Kosten: Großpackung mit 100 Bits in einer praktischen Vorratsbox.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Normen: DIN ISO 8764-1
Verpackung: Wiederverschließbare Kunststoffbox.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 39.68 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Die universellen Bits für ein breites Anwendungsspektrum.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Normen: DIN ISO 8764-1
Verpackung: Praktischer Pappkarton. Kann als Schütte benutzt werden.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 21.78 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Normen: DIN ISO 8764-1
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 2.76 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
Inhalt:
ab∗ : | 6.32 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Bohrung in der Bitspitze für TORX® Tamper Resistant Sicherheitsschrauben.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 5.69 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Präzisionsgefrästes Profil für höchste Passgenauigkeit - hochwertiger Stahl vermindert den Verschleiß und steigert die Lebensdauer.
Vereinfacht Ihre Arbeit: Kontrastreiche Lasermarkierung zur leichten Identifikation der Profilgröße auf dem Bit.
Senkt Ihre Kosten: Großpackung mit 100 Bits in einer praktischen Vorratsbox.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Verpackung: Wiederverschließbare Kunststoffbox.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 51.71 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 7.46 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Gehäuse: Praktische und robuste Kunststoffbox.
Bithalter: Universalhalter, magnetisch.
Bits: 25 mm Standard-Bits.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 45.22 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Die universellen Bits für ein breites Anwendungsspektrum.
Anwendung: Speziell für den Profi-Bedarf.
Bits: 25 mm Standard-Bits.
Verpackung: Praktischer Pappkarton. Kann als Schütte benutzt werden.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 32.19 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Leicht erkennbarer Inhalt durch große Symbole.
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 2.99 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Vereinfacht Ihre Arbeit: Klingenlänge variabel einstellbar von 18-90 mm.
Steigert Ihre Effizienz: Kompaktes Präzisions-Schraubwerkzeug System 4 mit umfangreichem, wechselbarem Klingensortiment.
Schont Ihre Gesundheit: Mit patentiertem SoftFinish® Griffdesign für hand- und muskelschonendes Arbeiten. Von Ärzten und Therapeuten des AGR empfohlen!
Erleichtert die Handhabung: Leichte Betätigung der Ver- und Entriegelungstaste.
Anwendung: Universal-Set für besonders kleine Schrauben bei elektronischen Komponenten.
Anwendung: Flexibles Arbeiten durch variabel einstellbare Klingenlänge und schnelles Wechseln des Bit-Einsatzes.
Griff: Bithalter-Klingenlänge variabel einstellbar.
Griff: SYSTEM 4 SoftFinish®-telescopic ESD Griff.
Griff: Elektrostatisch ableitend (dissipativ), Oberflächenwiderstand 10^6 - 10^9 Ohm.
Koffer: Robuste und platzsparende Metallbox.
Koffer: Keine Gefährdung elektronischer Komponenten durch Verwendung von EGB-sicheren Materialien.
Normen: DIN 3126, ISO 1173, Form C 4.
IEC 61340-5-1.
Inhalt:
ab∗ : | 98.87 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Anwendung: Für besonders kleine Schrauben.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C4
ab∗ : | 3.36 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Normen: DIN ISO 8764-1
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 0.57 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Steigert Ihre Effizienz: Alle gängigen 25mm Bits kompakt und platzsparend untergebracht.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Gehäuse: Einfachste Bit-Entnahme garantiert.
Anwendung: Verschraubungen aller Art in Handwerk und Industrie – kompakter geht's kaum!
Anwendung: Erweiterter Anwendungsbereich durch praktische Bitratsche.
Bithalter: Universalhalter, magnetisch.
Bits: 25 mm Standard-Bits.
Extra: Komfortables Handling durch Weichzonen.
Gehäuse: Box aus hochwertigem, schlagfestem Kunststoff.
Geometrie: Patentierte Torsionszone zum Schutz vor vorzeitigem Brechen des Bits bei Belastung.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 40.20 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Extra: Bohrung in der Bitspitze für Sechskant Tamper Resistant Sicherheitsschrauben.
Normen: DIN ISO 2351-3
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 4.08 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Steigert Ihre Effizienz: Optimierte Torsionszone für den harten Schraubfall, z.B. in Metall.
Steigert Ihre Effizienz: Alle gängigen Bits kompakt und platzsparend untergebracht.
Erleichtert die Handhabung: Bit-Ratsche für kraftvolles Schrauben. Dank Schaltwinkel von nur 5° auch zur Verwendung in engsten Räumen geeignet.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Spart Zeit: Immer der richtige Bit zur Hand.
Gehäuse: Einfachste Bit- und Ratschen-Entnahme garantiert.
Anwendung: Universelles Sortiment für Verschraubungen aller Art in Handwerk und Industrie.
Anwendung: Erweiterter Anwendungsbereich durch praktische Bitratsche.
Bithalter: Universalhalter 1/4", magnetisch.
Bits: 25 mm Z- und ZOT-Bits.
Extra: Universalhalter 1/4" kann als Verlängerung verwendet werden.
Gehäuse: Box aus hochwertigem, schlagfestem Kunststoff.
Geometrie: Patentierte Torsionszone zum Schutz vor vorzeitigem Brechen des Bits bei Belastung.
DIN 3126, ISO 1173, Form C6,3
Inhalt:
ab∗ : | 46.62 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Steigert Ihre Effizienz: Wiha MagicRing® Haltefunktion hält alle Sechskant-Schrauben ohne Magnet fest.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Anwendung: Schrauben aus Bohrungen herausheben oder hineinführen, speziell an schwer zugänglichen Stellen.
Bits: Reduziertes, überdrehtes Profil.
Extra: MagicRing® aus Federstahl hält alle Normschrauben in jeder Lage fest.
Normen: DIN ISO 2351-3
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 3.10 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Konus an der Spitze erleichtert das Einstecken in die Schraube.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 1.96 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Normen: DIN ISO 2351-3
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 1.99 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Verstärkter Profilquerschnitt überträgt im Vergleich mit einem TORX®-Profil ca. 25% mehr Drehmoment.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 2.58 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: DIN 3126, ISO 1173, Form C 8.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
ab∗ : | 2.71 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Normen: DIN ISO 8764-1
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 0.57 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: DIN 3126, ISO 1173, Form C 8.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
ab∗ : | 3.92 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 0.88 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Vereinfacht Ihre Arbeit: Kugelkopf erleichtert Zugang zu Schrauben und ermöglicht das Arbeiten bei einem Winkel von bis zu 25°.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Anwendung: Speziell für schwer zugängliche Schrauben.
Anwendung: Ideal für Fensterbauer.
Bits: Reduziertes, überdrehtes Profil.
Extra: Kugelkopf ermöglicht das Verschrauben unter einem Winkel von bis zu 25°.
Normen: DIN ISO 2351-3
Verpackung: Kunststoffbox, wiederverwendbar und staubabweisend.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 3.99 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Tri-Wing®-Sicherheitsschrauben.
Bits: Reduziertes, überdrehtes Profil.
Geometrie: Torsionszone zum Schutz vor vorzeitigem Brechen des Bits bei Belastung.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet, zähhart.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 4.74 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Extra: Bohrung in der Bitspitze für TORX® Tamper Resistant Sicherheitsschrauben.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 2.34 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: Gewindeanschluss M5.
Anwendung: Für optimalen Einsatz in Schraubautomaten.
Normen: DIN ISO 8764-1
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
Gewindeanschluss M5
ab∗ : | 6.88 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 3.10 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Erfüllt Ihre Ansprüche: Robuste und passgenaue Bits für allgemeine Verschraubungen im Handwerk oder in der Industrie.
Spart Zeit: Einfache und rasche Erkennung der Profilgröße dank kontrastreicher Lasermarkierung.
Abtrieb: DIN 3120, ISO 1174, Form A 6,3 + A 10.
Antrieb: DIN 3126, ISO 1173, Form C 6,3.
Anwendung: Für Verschraubungen aller Art in Handwerk und Industrie.
Bits: Reduziertes, überdrehtes Profil.
Normen: DIN ISO 8764-1
DIN 3126, ISO 1173, Form C6,3
ab∗ : | 2.90 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: Gewindeanschluss M5.
Anwendung: Für optimalen Einsatz in Schraubautomaten.
Normen: DIN ISO 8764-1
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
Gewindeanschluss M5
ab∗ : | 6.88 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
WIHA
Antrieb: Gewindeanschluss M4.
Anwendung: Für optimalen Einsatz in Schraubautomaten.
Normen: DIN ISO 8764-1
Werkstoff: Hochwertiger Chrom-Vanadium Stahl, durchgehend gehärtet.
Gewindeanschluss M4
ab∗ : | 6.70 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit : |
Tip Type |
shank diameter(mm) |
Overall Length(mm) |
Single Product Set Product |
Tip size / Phillips (+) |
Tip size / flathead (-) blade width (mm) |
Tip two-sided width size (mm) |
Bit Quantity |
Presence of magnet at the blade tip |
Whether there is a double-end function |
Tip size / flathead (-) blade thickness (mm) |
Warenzeichen | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA | WIHA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Wiha Bit Professional 70 mm PlusMinus/Pozidriv 2-tlg. 1/4" E6,3 in Box | Wiha Bit Set reduzierter Durchmesser 25 mm Pozidriv 10-tlg. 1/4" in Box | Wiha Bit Set Standard 25 mm Innenvierkant 2-tlg. 1/4" in Box | Wiha Bit Set Standard 25 mm Phillips, 50-tlg. 1/4" C6,3 in Großpackung | Wiha Bit Standard 25 mm Phillips, 100-tlg. 1/4" in Großpackung | Wiha Bit Set Standard 25 mm Pozidriv, 100-tlg. 1/4" in Großpackung | Wiha Bit Set Standard 25 mm Pozidriv, 50-tlg. 1/4" C6,3 in Großpackung | Wiha Bit Set Standard 25 mm TORX®m 1/4" 3-tlg in Box【3 Stk. pro Packung】 | Wiha Bit Set Standard 25 mm TORX® Tamper Resistant (mit Bohrung) 2-tlg. 1/4" in Box | Wiha Bit Set Standard 25 mm TORX®, 100-tlg. 1/4" C6,3 in Großpackung | Wiha Bit Set Standard 25 mm Pozidriv, TORX®, 1/4" C6,3 in Box | Wiha Bit Set Standard 25 mm TORX®, 50-tlg. 1/4" C6,3 in Großpackung | Wiha Bit Set XLSelector Standard 25 mm gemischt 16-tlg, mit Bitratsche 1/4" C6,3 | Wiha Bit Standard 25 mm TORX® Tamper Resistant (mit Bohrung) 1/4" C6,3 | |||||||||||||||||||||||||||||||
ab∗ | 10.12 € *Stückpreis Standardkonfiguration | 9.51 € *Stückpreis Standardkonfiguration | 2.30 € *Stückpreis Standardkonfiguration | 29.74 € *Stückpreis Standardkonfiguration | 2.99 € *Stückpreis Standardkonfiguration | 4.85 € *Stückpreis Standardkonfiguration | 4.88 € *Stückpreis Standardkonfiguration | 21.78 € *Stückpreis Standardkonfiguration | 2.76 € *Stückpreis Standardkonfiguration | 2.90 € *Stückpreis Standardkonfiguration | 4.85 € *Stückpreis Standardkonfiguration | 39.68 € *Stückpreis Standardkonfiguration | 9.12 € *Stückpreis Standardkonfiguration | 39.68 € *Stückpreis Standardkonfiguration | 21.78 € *Stückpreis Standardkonfiguration | 2.76 € *Stückpreis Standardkonfiguration | 6.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.69 € *Stückpreis Standardkonfiguration | 51.71 € *Stückpreis Standardkonfiguration | 7.46 € *Stückpreis Standardkonfiguration | 45.22 € *Stückpreis Standardkonfiguration | 32.19 € *Stückpreis Standardkonfiguration | 2.99 € *Stückpreis Standardkonfiguration | 98.87 € *Stückpreis Standardkonfiguration | 3.36 € *Stückpreis Standardkonfiguration | 0.57 € *Stückpreis Standardkonfiguration | 40.20 € *Stückpreis Standardkonfiguration | 4.08 € *Stückpreis Standardkonfiguration | 46.62 € *Stückpreis Standardkonfiguration | 3.10 € *Stückpreis Standardkonfiguration | 1.96 € *Stückpreis Standardkonfiguration | 1.99 € *Stückpreis Standardkonfiguration | 2.58 € *Stückpreis Standardkonfiguration | 2.71 € *Stückpreis Standardkonfiguration | 0.57 € *Stückpreis Standardkonfiguration | 3.92 € *Stückpreis Standardkonfiguration | 0.88 € *Stückpreis Standardkonfiguration | 3.99 € *Stückpreis Standardkonfiguration | 4.74 € *Stückpreis Standardkonfiguration | 2.34 € *Stückpreis Standardkonfiguration | 6.88 € *Stückpreis Standardkonfiguration | 3.10 € *Stückpreis Standardkonfiguration | 2.90 € *Stückpreis Standardkonfiguration | 6.88 € *Stückpreis Standardkonfiguration | 6.70 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit : | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | auf Anfrage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage |
Tip Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
shank diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Overall Length(mm) | - | - | 25 | - | - | - | - | - | - | 25 | - | - | - | - | - | - | - | - | - | - | - | - | - | 135 | 28 | 25 | - | 25 | - | 25 | 25 | 25 | 25 | 32 | 25 ~ 32 | 35 | 25 | 38 | 25 | 25 | 33 ~ 45 | 35 | 32 | 33 ~ 45 | 33 |
Single Product Set Product | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Produktsatz | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip size / Phillips (+) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip size / flathead (-) blade width (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip two-sided width size (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Bit Quantity | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Presence of magnet at the blade tip | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Whether there is a double-end function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip size / flathead (-) blade thickness (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...