Schalttafeln / Schaltschränke / Schaltkästen（Schutzfunktion (umweltbeständig)：NA）

?* Informationen zur Lieferzeit und Preisen

• 

  Kunststoffgehäuse mit Silikon-Schutzvorrichtung TWS

  TAKACHI ELECTRONICS ENCLOSURE

  An elastic protector that protects critical internal equipment from falling impacts.
  
  [Features]
  - A small general-purpose plastic case with silicon protector
  - The flexible, slip-resistant cover protects equipment from falling impacts.
  - 11 types in total; available in a choice of 18 colors.
  - Internal case material: Cases with the color-codes B (black) and G (light gray) are made from ABS resin (UL94HB). Cases with the color-code W (off-white) are made from flame-retardant ABS resin (UL94V-0).
  - Note that the material varies according to the color code.
  - Screw the silicon protector and plastic case together at the joint.
  - Do not over-tighten the screw; this will cause the screw to bite into the silicon.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	8.23 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Universalkasten, Modell CU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	17.23 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schalttafelgehäuse, Serie FC

  TAKACHI ELECTRONICS ENCLOSURE

  Control Panel Box (FC)
  
  [Features]
  · A total of 700 different general purpose aluminum boxes are available, including a total of 175 different sizes, with 7 different heights, 9 different widths and 6 different depths, as well as 4 different color specifications available.
  · The panel structure includes both a screw-in side and an inlay side, and either side can be placed in front.
  · The frame contains a structure that includes a slide nut, so mounting of a chassis or DIN rail is possible without performing additional work.
  Available color specifications include GS (gray / silver), BS (black corner block), BX (black corner block / frame), and BB (all black).
  · Product can be used in a variety of different applications, including operational boxes, touch panel display cases, etc.
  · Customers who require a custom-sized case should use the 8 - 11P - 16P FCS Series.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	32.73 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Systemgehäuse mit Trageriemen, Serie MSY

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Band Handle (MSY)
  
  [Features]
  · Series of aluminum chassis cases with band handles. 480 models available, with 8 heights, 6 widths, 4 depths, and 160 sizes.
  · Has a plastic band handle to provide a sense of unity with the case.
  · The handle can withstand a load of 20 kg.
  · For cases with and depth dimensions of 160×230 or 160×280, the top and bottom covers lack heat dissipation holes.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	84.83 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kasten aus Aluminiumdruckguss, Serie TD

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Die Cast Box (TD)
  
  [Features]
  · 39 models with 13 sizes and 3 types of color specifications are available.
  · Box with superior impact resistance.
  · Thin and clean design with corner R.
  · Unprocessed N type can also be used as a conduction box.
  · Small, round design.
  · Available unprocessed and in standard colors, with 2 types of paint finish (light gray and black).

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	10.07 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Systemgehäuse mit Trageriemen, Serie MOY

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Band Handle (MOY)
  
  [Features]
  · Series of aluminum cases with band handles includes a total of 480 models in 160 sizes, including 8 different heights, 6 different widths and 4 different depths.
  · All aluminum and lightweight, making it ideal for equipment such as portable measuring instruments.
  · A plastic band handle to provide a sense of unity with the case.
  · The handle can withstand a load of 20 kg.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	81.64 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  U-förmiges, leichtes ACH aus Aluminium in freier Größe

  MISUMI

  Die Größe kann vom Kunden in 3 Richtungen angefordert werden. Die U-Form ermöglicht eine hervorragende Verarbeitbarkeit.

  • Aluminum
  • Free Size

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	9 Arbeitstage

• 

  Metall-Systemgehäuse, Serie MS

  TAKACHI ELECTRONICS ENCLOSURE

  Metal System Case (MS)
  
  [Features]
  - The MS Series is a series of assembled system cases. There are 528 models available, with 8 heights, 6 widths, 5 depths, and 176 sizes.
  · Superior design characteristics include rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front and rear panels so forming can be performed easily.
  - Top and bottom covers are shared, so the top cover, which has heat dissipation holes, can also be used as a bottom cover.
  - Optional rack mounting bracket attached, and can be used as a rack-mounted case.
  - Three color specifications: two-tone coloring with midtone gray and light gray (G Type), all black (B Type), and silver panel services (BS Type).
  - Use to fit your application.
  - For cases with width and depth dimensions of 160×160, 160×230, 160×280, or 210×160 mm, the top and bottom covers lack heat dissipation holes.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	84.25 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse mit Silikonabdeckung, Serie LCS

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case with Silicon Cover (LCS)
  
  [Features]
  - Handheld case with silicon cover.
  - The flexible non-slip cover therefore protects devices from falls.
  - Internal case is flame retardant ABS resin (UL94V-0).
  - 8 battery configurations: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, one 006P (9 V), and no batteries.
  - ⊕ and ⊖ battery terminal symbols included.
  - Use on a variety of hand-held equipment, including measuring instruments, detection instruments, communications devices, and medical devices.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	8.05 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kleines Aluminiumgehäuse, Serie KC

  TAKACHI ELECTRONICS ENCLOSURE

  Small Aluminum Case (KC)
  
  [Features]
  · The KC Series is a series of cases that use aluminum extrusion materials in their bodies, ABS resin in their panels, and have corners with R.
  · The combination of ABS resin and aluminum extruded materials makes for lightweight cases.
  · Panels are stepped at 0.75 mm, which allows for attachment of laminate film.
  · Assembled structure gives it superior workability.
  · Optimal as a hand-type case.
  · 3 types of color specifications are available: light gray and silver/black and silver/black and black.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	12.46 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoffkasten zum Öffnen und Schließen, Serie OP

  TAKACHI ELECTRONICS ENCLOSURE

  Openable/Closable Plastic Box (OP)
  
  [Features]
  · Small box made of ABS plastic which can be opened and closed.
  · The top cover is hinged and can be opened and closed using one touch.
  · A broad general-purpose box ideally placed indoors and used either on a desktop or mounted on a wall.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	6.61 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hitzebeständiges Kunststoffgehäuse, Serie SW-T

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Resistant Plastic Case (SW-T)
  
  [Features]
  - One-touch opening/closing.
  - Large internal space available for use.
  - Small, multi-purpose case.
  - The ABS-resin SW series features 17 models in two different colors: S (light blue) and B (black).
  - The flame-retardant, heat-resistant ABS-resin SW-N series features 13 G (gray) models.
  - The ABS SW-T series features 6 B (black) models.
  - Full line-up of optional parts, including printed circuit boards that fit the case perfectly and parts for board mounting (sold separately).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.13 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flammhemmendes Kunststoffgehäuse, Serie TWN

  TAKACHI ELECTRONICS ENCLOSURE

  Flame-retardant Plastic Case (TWN)
  
  [Features]
  · Small general-purpose plastic case with screw anchor configuration.
  · Material properties: TW Series ABS resin in a total of 26 sizes with 2 color specifications of G (light gray) and B (black), and a TWN Series flame-retardant ABS resin in a total of 23 sizes with a color specification of W (off-white).
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and handheld controllers, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.64 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Systemgehäuse, komplett aus Aluminium, Serie MO

  TAKACHI ELECTRONICS ENCLOSURE

  All-Aluminum System Case (MO)
  
  [Features]
  · The MO series features a total of 528 pre-fabricated system case models, including 176 different sizes, with 8 different heights, 6 different widths, and 5 different depths.
  · All-aluminum lightweight type.
  · Superior design characteristics include rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so forming can be performed easily.
  · Can be used as a rack-mounted case via attachment of a rack-mount bracket (optional).
  · A total of three color specifications are available: a two-tone color scheme with intermediate gray and light black (G type), all black (B type), and silver panel (BS type).
  · Please select from one of the above according to your target application.
  · The top and bottom covers do not include heat dissipation holes.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	82.18 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  R-Serie Box 4-Punkt-Schraube Typ RSDX-Serie

  MISUMI

  Serie R 4-Punkt-Schraube Typ

  • Steel
  • Free Size
  • Powder-Coated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

• 

  Schaltschrank, konfigurierbare Größe, Typ FCS

  MISUMI

  Ideal für die Einbettung von Leiterplatten und Steuergeräten. Die Front- und Rückplatten sind mit Senkkopfschrauben befestigt, was die Wartung erleichtert.

  • Steel
  • Free Size
  • Powder-Coated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

• 

  JIS-Einschubgehäuse, Serie JR

  TAKACHI ELECTRONICS ENCLOSURE

  JIS Rack Case (JR)
  
  [Features]
  · The JR Series is a series of rack cases with 6 heights, 7 depths, and 42 sizes available.
  · Sectional JIS standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	88.49 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse UM3 / UM4 mit Batteriefach UM3, Serie LM

  TAKACHI ELECTRONICS ENCLOSURE

  UM3/UM4 Case with UM3 Battery Box (LM)
  
  [Features]
  · Small battery case, for easy battery replacement.
  · Flame-retardant ABS resin (UL94V-0).
  · Drop-fit cover top surface makes it suitable for numerous applications, such as touch panel sheet attachment.
  · Case thickness has been kept to a minimum, making it optimal for portable equipment.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	9.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Metallgehäuse, Serie SRDSL

  TAKACHI ELECTRONICS ENCLOSURE

  Metal Case (SRDSL)
  
  [Features]
  · The SRDSL Series is a series of aluminum chassis that are suited for vacuum tube stereo power amplifiers and tabletop control boxes.
  · The top panel has a high-quality hairline alumite finish, and is available in 2 colors: champagne gold and silver.
  · The main body frame has a welded aluminum integrated structure, making it lightweight and easy to assemble.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	98.13 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schaltkasten mit Griff, Serie FCH

  TAKACHI ELECTRONICS ENCLOSURE

  Control Box with Handle
  
  [Features]
  - A total of 46 aluminum boxes are available, including 23 different sizes, 2 different heights, 5 different widths and 5 different depths.
  - Attached handle makes it easy to carry around.
  - Handle tolerates loads of up to 25 kgf.
  - Simple design, with the frame made of extruded aluminum and the corner elements made of ABS resin.
  - Panel structure includes both a screw-in and an inlay side; either side can be placed in front.
  - Frame structure includes a slide nut for mounting a chassis or DIN rail.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	60.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse für Mobiltelefon, Serie PU

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Mobile Phone Case (PU)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	68.91 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EIA-Einschubgehäuse, Serie RUS

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Case (RUS)
  
  [Features]
  · Functionally oriented tack case.
  · Has a simple structure and the front panel can be removed while stored on a rack.
  · Two colors are available for the panel and mounting bracket: beige and black.
  · Usable height can be expanded by reversing the chassis.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	91.22 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Universeller Aluminium-Schutzkasten, Serie UC

  TAKACHI ELECTRONICS ENCLOSURE

  Universal Aluminum Sash Case (UC)
  
  [Features]
  - The UC series uses extruded aluminum on the top/bottom covers; it is useful for a broad range of applications, including corner-R mounted electric, electronic, and control equipment.
  - The front and black panel on the GX type have different colors; light gray and dark gray.
  - The top and bottom covers have 2 and 3 grooves respectively in their fronts and backs; use these for transfer panels, sub panels, printed circuit board mounting, etc.
  - Chassis, chassis mounting brackets, panel antishock fixtures, and hexalobular hole mounting slippage prevention screws are available as optional components.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	17.18 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Abgeschrägter Schaltkasten, Serie CF

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Control Box (CF)
  
  [Features]
  - The clean design features a 10° slope which makes operation easy.
  - The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Machining is easy because of the flat plate.
  - The product is extremely lightweight, with the side plates employing flame retardant ABS resin (UL94V-0) and the frame employing extruded aluminum.
  - The product can be mounted in any position due to the sticky rubber legs.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	23.03 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schaltkasten zum Öffnen und Schließen, Serie FCW

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and Closing Control Box (with key / without key)
  
  [Features]
  - A total of 864 different opening and closing aluminum boxes are available, including 108 different sizes, with 6 different heights, 6 different widths and 7 different depths, 2 flat surface handle types and 4 color specifications.
  - Opening and closing cabinet type allows for easy maintenance.
  - Flat surface handles both with and without keys included are available.
  - The frame structure includes a slide nut, allowing a chassis or DIN rail to be mounted.
  Available color specifications include GS (gray/silver), BS (black corner block), BX (black corner block/frame), and BB (all black).
  - Product can be used in a variety of different applications, including control panel boxes, operational boxes, and touch panel display cases.
  - Customers who require a custom sized case should use the 8 - 17 - 20P FCWS series.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	74.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Tragbares Kunststoffgehäuse, Serie LC

  TAKACHI ELECTRONICS ENCLOSURE

  Handheld Plastic Case (LC)
  
  [Features]
  - This handheld case features a sharp design, including tapered elements.
  · The case material is flame retardant ABS resin (UL94V-0).
  · Allows for 8 battery configurations: 2 AA batteries, 3 AA batteries, 4 AA batteries, 2 AAA batteries, 3 AAA batteries, 4 AAA batteries, one 006P (9 V) battery, or no batteries.
  ▪ Includes battery terminal symbols (⊕ and ⊖).
  - Can be used for a variety of hand-held equipment including measuring instruments, detection instruments, communications devices, and medical devices.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	4.12 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Wärmeableitungsgehäuse, Serie HEN

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Dissipation Case (HEN)
  
  [Features]
  · Surface treatment offers hair line processing with a luxurious feel and superior design characteristics
  · Natural air-cooled case with heat sink shape that accommodates heating countermeasures.
  · A total of 36 models in 18 sizes are available, including 6 different heights, 1 width and 3 different depths.
  · A very sturdy case made of aluminum extruded material.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	35.29 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse, Serie TW

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic case (TW)
  
  [Features]
  - A small general-purpose plastic case with a screw-securing configuration.
  - The ABS-resin TW series comes in 26 sizes with 2 color specifications: G (light gray) and B (black). The flame-retardant ABS-resion TWN series comes in 23 sizes with one color specification: W (off-white).
  - Equipped with a boss for mounting on a circuit board.
  - Use on a variety of devices, such as measuring instruments, communication devices, and handheld controllers.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.51 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Flammhemmendes Plastikgehäuse mit Befestigungskante, Ausführung TWF

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • With flange foot eases installation.
  • 23 sizes of flame-retardant plastic cases, and available in two colors - off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and controllers, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.87 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse mit Silikon-Schutzvorrichtung, Ausführung CSS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Small form plastic case with silicon cover.
  · The cover is flexible and does not slip easily, protecting devices from impact due to falling.
  · A smartphone size CSS115 that takes 2 coin batteries (CR2032) and a type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type that takes coin batteries (CR2032).
  Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, and simple measuring instruments, etc.
  · Customers can select from 3 sizes, 6 different models, and 12 different color finishes.
  · Silicon covers with and without a front face opening are available.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	4.39 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Netzwerkgehäuse, Modell PF

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - A panel plastic case with a flat design that has perfectly even panel surfaces.
  - Made from flame retardant ABS resin (UL94V-0) in all 8 sizes.
  - Available in off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  - Case with a design that makes it suitable for tabletop use or mounting to wall services.
  - May be used with a variety of devices, such as communication devices, measuring instrument controllers, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	6.88 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Steel Terminal Block Box, with Lid Model DIN Rail

  MISUMI

  Eine Abzweigdose zur Schraubmontage des Deckels. Mit DIN-Schiene kann er für eine Vielzahl von Anwendungen eingesetzt werden.

  • Mengenrabatt

  • Space-saving
  • Steel
  • Fixed Size

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	54.83 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steel Terminal Block Box, with Door Model DIN Rail

  MISUMI

  Eine Abzweigdose zum Öffnen und Schließen. Mit DIN-Schiene kann er für eine Vielzahl von Anwendungen verwendet werden.

  • Mengenrabatt

  • Space-saving
  • Steel
  • Fixed Size

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	68.66 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schaltschrank, konfigurierbare Größe, mit Schnappverschluss, Typ FSB

  MISUMI

  Ein Steuergehäuse aus Stahl, Schnappverschluss, Serie FSB, mit anpassbarer Größe.

  • Steel
  • Free Size
  • Powder-Coated

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	8 Arbeitstage

• 

  Einschubgehäuse, Serie MOR

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case (MOR)
  
  [Features]
  · The MOR Series is a series of assembled rack cases with 7 heights, 4 depths, and 28 sizes available.
  · Lightweight type made completely from aluminum.
  · Both the top cover and the bottom cover lack heat dissipation holes.
  · There is an assortment of three color types; gray and light gray (panel HL silver), all black (panel HL black), and black (panel HL silver).
  · Case has superior design characteristics: rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so machining can be performed easily.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	110.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EIA-Einschubgehäuse, Serie YER

  TAKACHI ELECTRONICS ENCLOSURE

  EIA rack case (YER)
  
  [Features]
  - Stronger panels on the YER series; effective width is now 424 mm.
  - More effective area inside the case provided.
  - Panels available in 2 colors: silver and black.
  - EIA standard rack case with panels, sides and top and bottom plates made of aluminum. Assembly makes machining, silk printing, and carving easy to perform.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	81.66 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EIA-Einschubgehäuse, Serie ER

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Case (ER)
  
  [Features]
  · The ER Series is a series of rack cases with 5 heights, 7 depths, and 35 sizes available.
  · Sectional EIA standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	90.78 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Tragbares Kunststoffgehäuse, Serie GHA

  TAKACHI ELECTRONICS ENCLOSURE

  Hand-Held Plastic Case (GHA)
  
  [Features]
  - Handheld plastic case available in a total of 11 sizes.
  - Models that accommodate storage of AA, AAA and 9V batteries are available.
  - Two colors are available: white gray and black.
  - Ideal for use with small handheld wireless communications devices and measuring instruments.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	4.51 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Vertikaler Aluminium-Schutzkasten mit Kühlkörper, Serie HY

  TAKACHI ELECTRONICS ENCLOSURE

  An aluminum box for natural cooling with a vertical heat sink shape made with thermal countermeasures in mind.
  [Features]
  · Uses aluminum extrusion material for incredible durability.
  · The case is made of few parts, making assembly easy.
  · Aluminum case for thermal countermeasures with a shape that effectively dissipates heat.
  · Superior design, with a hairline finish on the surface for a high-quality feel.
  · Easy-to-mount design due to the flat heat sink surface.
  · 5 heights, 4 widths, and 1 depth, for a total of 20 sizes and 40 types available.
  [Applications]
  · Ideal for fanless PCs, power amplifiers, power source equipment, etc.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	83.89 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse, Serie KW

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Plastic case (KW)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	1.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einschubgehäuse, Serie MRS

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case (MSR)
  
  [Features]
  · The MSR series features a total of 28 differently sized cases requiring assembly, with seven different heights and four different depths available.
  · There is an assortment of three color types: two-tone coloring with midtone gray and light gray (panel – HL silver), all black (panel – HL black), and black (panel – HL silver).
  · Superior design characteristics include rounded corners providing a soft feel and screws not exposed on the surface.
  · Flat structure mated to frame for both front panel and rear panel so forming can be performed easily.
  - The top and bottom covers are interchangeable, so the cover with heat dissipation holes (upper cover) can be used as a bottom cover.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	115.29 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schutzkasten, Serie OS

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Sash Case, 351 Sizes and 1404 Models (OS)
  
  [Features]
  · Size accommodates full aluminum rack storage and can be used as a rack unit case by attaching the mount bracket.
  · The prefabricated design makes additional processing / machining of the panel, side plate or top plate easy.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	80.00 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schutzkasten mit abnehmbarer Blende, Serie POS

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Panel Aluminum Sash Case (POS)
  
  [Features]
  · POS Series case allows for the panel to be removed via sleeve screws.
  · This prefabricated case can be used as an independent housing or as a rack mounting unit case (with W dimension of 430 or 431).
  · Both silver and black are available for the panel, side board, frame, top board and bottom board.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	92.36 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schutzkasten mit abnehmbarer Blende, Serie PSL

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Panel Aluminum Sash Case (PSL)
  
  [Features]
  · PSL Series case allows for the panel to be removed via sleeve screws.
  · This prefabricated case can be used as a rack mounted unit case via a mounting bracket.
  · Both silver and black are available for the panel, side board, and frame.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	91.35 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse, Öffnen und Schließen durch einmaliges Berühren, Serie SU

  TAKACHI ELECTRONICS ENCLOSURE

  One-Touch Openable/Closeable Plastic Case (SU)
  
  [Features]
  · This case features a soft and curvy design.
  · A new white model which is suited for indoor installation is now available.
  · Perfect for use as a wall mounted case.
  · A one-touch openable/closeable structure.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	6.54 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...