Steckverbinder für Platinen
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Empfehlung
DIN-Steckverbinder (4 Reihen, 128 Kontakte) – XC5 (Multi-Kontakte)
OMRON
[Features]
・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 18.10 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Empfehlung
DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.73 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm is applicable.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
· Fit guiding.
· Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
· Protects against incorrect insertion into the circuit board.
· Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
· Two-part integrated product.
· This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.37 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.15 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4
HIROSE ELECTRONIC
Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
[Features]
·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
●Dip Timer.
1. Small and Lightweight.
・Mounting space and weight are the same as the prior products (FX2 series).
・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
2. · Compatible with 5 mm to 11 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
3. Prevention of flux oozing.
· Prevents flux oozing during circuit board dip soldering.
4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
· The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.71 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.71 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für Flachbandkabel (Ausführung PCB) , XG2
OMRON
[Features]
· Total cost reduction is achieved by high-density mounting and low-power wire connections.
· The pressure-welded system lets you connect all terminals in bulk without any terminal processing work.
· Can be dip-soldered directly to a PCB.
· The small size (height 5.8 mm, width 6.8 mm) greatly improves PCB mounting efficiency.
· Uses a 2.54 mm grid terminal array.
· PCB pattern design is easy.
· Two types of terminal arrays: standard and inverse.
· Uses insulating materials complying with UL standards (UL94V-0).
· Pressure-welding tool uses attachment that supports all poles.
· Saves time and work connecting wires.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie B2L 3,5
WEIDMÜLLER
Steckbarer Leiterplatten-Anschluss mit innovativer Anschlusstechnologie für eine sichere und intuitive Handhabung.› Jetzt konfigurierenab∗ ： 2.17 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10
HIROSE ELECTRONIC
[Features]
· Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
Some in-stock items are custom products, therefore returns and cancellations are not possible.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.79 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,54 mm Rastermaß: Serie HIF3H
HIROSE ELECTRONIC
This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
[Features]
・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
・Compatibility: It can be combined with other HIF3 series connectors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.59 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Steckverbinder (mit Kabelanschluss) – XC6
OMRON
[Features]
・ A connector for cable connection that broadens the applications for DIN connectors.
・ There are 2 types of connector available for connecting flat cables and discrete wires, which can then be selected according to the application.
・ By using flat cable connectors (XC6D and XC6H types), VME bus configurations (daisy chain) and backplane configurations are possible.
・ The connector for discrete wire connections (XC6V type) uses pressure welded contacts and partitioned contact blocks, significantly reducing the work load associated with harnessing.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 28.59 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
[Features]
· Compatible with 5 mm to 9 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
· Long effective mating length of 1.7 mm.
· A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
· Fit guiding.
· A ±1 mm self alignment and large guiding volume makes for easy mating.
· Supports automatic mounting.
·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.39 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5
HIROSE ELECTRONIC
A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
[Features]
· Number of pins, header-side height: 2 types.
· 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
· 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit Verriegelung, 7,92 mm Rastermaß – Serie DF22【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
· Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder, Steckerabdeckung für E / A-Karten
HIROSE ELECTRONIC
This is an inner lock plug cover for back connector NX series for I/O cards.› Jetzt konfigurierenab∗ ： 2.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9
HIROSE ELECTRONIC
This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
[Features]
・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
・This allows for every type of card signal to be accelerated.
・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.65 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Steckverbinder (Zwillingskontakte) – XC5 (DIN-Norm)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.74 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
IC-Buchse – XR2
OMRON
[Features]
・ Highly reliable such as being able to cope with sudden power outages etc.
・Ideal for high speed data processing circuits.
· The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
・ The opening for inserting the contact is large, so insertion is easy.
・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
· Has excellent resistance to rises in flux.
・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
▪ UL standard (File No.E103202).
・ Certified products are used as standard.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.95 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
USB-Anschluss, XM7
OMRON
A compact interface connector that complies with USB standards
[Features]
· Mini-USB connector.
· 5000 installation/removal cycles.
· L-shaped DIP terminals and SMT terminals available.
· USB connector.
· The A type socket is for PCs and USB hubs, etc. The B type socket is for printers, scanners, mice and other PC peripherals.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.12 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für Flachbandkabel (Universalausführung) – XG4
OMRON
The core of this printed circuit board connector is compliant with MIL standards.
[Features]
· The adoption of a new high-productivity design has delivered both high reliability and low costs.
· A box type plug (XG4C type) that helps save space during installation is also available.
· A press-fit type plug (XG4E type) that can be used as a relay is also available.
· A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
· The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
· Complies with MIL standards (MIL-C-83503).
· UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX18
HIROSE ELECTRONIC
0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 13.75 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 3.35 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 4.45 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie BLZF 3,5
WEIDMÜLLER
Steckbarer Leiterplatten-Anschluss mit innovativer Anschlusstechnologie für eine sichere und intuitive Handhabung.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.69 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 99,999.00 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
SL Serie 3,5
WEIDMÜLLER
Steckbarer Leiterplatten-Anschluss mit innovatiever Anschlusstechnologie für eine sichere und intuitive Handhabung.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.86 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie FFC
HONDA TSUSHIN KOGYO
Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
[Features]
• The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
• Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
• Can be used, in combination with the DIC series, as circuit-switching terminal plates.
• Can select the number of contacts required.
• Many pin lengths are available, so the user can select the appropriate length for a given.
• Select the surface required: gold, tin, or copper.
• Molds come in two colors (black and red).
• Remover pin prevents backwards insertion.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie DIC
HONDA TSUSHIN KOGYO
2.54 mm pitch connector used for circuit switching and the like.
[Features]
• Many varieties available for combination with the FCC and HKP series.
• Plating thickness is selectable according to cost requirements.
• Insulator is UL-certified.
• These connectors also come in 2, 3 and 4-series versions.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.96 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / FPC/FFC-Steckverbinder, Serie FH28 (Höhe 2,55 mm)
HIROSE ELECTRONIC
[Features]
· A solidly built connector for FPC/FFC connections.
· An FPC positioning mechanism provides highly reliable connections.
In-stock items are custom products, therefore returns and cancellations are not possible.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.58 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11
HIROSE ELECTRONIC
[Features]
· A board-to-board connector with a ground plate.
· Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.86 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8
HIROSE ELECTRONIC
The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm can be applied.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
· Fit guiding.
· Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
· Prevents mis-insertion with circuit boards.
· By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
・2-Piece Unit.
・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7
HIROSE ELECTRONIC
With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
[Features]
▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
▪ Rich variation: single-array, double-array, and tin/gold plating available.
▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.45 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.25 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Vertikale Verbindungszapfen-Stiftleiste mit 2,5 mm Rastermaß, Serie MDF14A
HIROSE ELECTRONIC
[Features]
■ For low-cost vertical board mounting with no reseating necessary
· Post header specially designed for vertical board mounting with no reseating necessary.
· Low-cost connection provided by a combination receptacle and plug design.
■ Current capacity: 5A
· ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
■ Temporary board fixing mechanism
· Kinking keeps boards temporarily in place.
■ Pin-out specifications
· Compatible with a variety of pin-out specifications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.33 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemme mit 1 Reihe) , Serie A4
HIROSE ELECTRONIC
2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Karten-Anschluss, kompatibel mit CardBus, Serie IC11S
HIROSE ELECTRONIC
A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
[Features]
· PC Card Standard: Ground plate equipped with 8 connection ground points.
·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
· Compatible with Type I, Type II, and Type III cards.
· Includes terminal for ground clip.
· Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
· Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
· Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
· High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
· Independent ejection mechanism used for easy removal of multiple high-output cards.
· Many variations: with many variations, a type that matches to a particular set can be selected.
· Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
· The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
· Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
· Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
· Also, POP-UP version 2 is approx. 12% lighter than version 1.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.66 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CF-Karten-Steckverbinder Serie MI20 / 21
HIROSE ELECTRONIC
This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN13
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.› Jetzt konfigurierenab∗ ： 1.50 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder Serie NX für E / A-Karten
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MicroSD-Karten-Anschluss – Serie DM3
HIROSE ELECTRONIC
A socket connector for use with the microSD Card TM. Available in a wide array of variations.
Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.23 € Minimum Lieferzeit ： 60 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard
HIROSE ELECTRONIC
This PC card connector is compliant with the PC Card Standard.
[Features]
· Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
· Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
· Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
· Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
· Card connectors that support automatic mounting are available.
· Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.› Jetzt konfigurierenab∗ ： 3.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | OMRON | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | OMRON | WEIDMÜLLER | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | OMRON | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | OMRON | OMRON | OMRON | OMRON | HIROSE ELECTRONIC | HARTING | ERNI | ERNI | WEIDMÜLLER | WEIDMÜLLER | WEIDMÜLLER | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | DIN-Steckverbinder (4 Reihen, 128 Kontakte) – XC5 (Multi-Kontakte) | DIN-Steckverbinder (für mittleren und starken Stromfluss) – XC4 | Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C | EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C【1-100 Stk. pro Packung】 | Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10【1-100 Stk. pro Packung】 | Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10 | Platine-zu-Kabel-Steckverbinder mit 2,54 mm Rastermaß: Serie HIF3H | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12 | Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6 | Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5 | Rückseitiger Steckverbinder, Steckerabdeckung für E / A-Karten | Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9 | Steckverbinder für Flachbandkabel (Universalausführung) – XG4 | Steckverbinder / FPC/FFC-Steckverbinder, Serie FH28 (Höhe 2,55 mm) | Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11 | Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8 | Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7 | Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2 | Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1 | Vertikale Verbindungszapfen-Stiftleiste mit 2,5 mm Rastermaß, Serie MDF14A | Stiftleiste mit 2 mm Rastermaß (Klemme mit 1 Reihe) , Serie A4 | Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3【1-100 Stk. pro Packung】 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN13 | PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard | ||||||||||||||||||||
| ab∗ | 18.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.17 € *Stückpreis Standardkonfiguration | 2.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.09 € *Stückpreis Standardkonfiguration | 5.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.74 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.35 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.69 € *Stückpreis Standardkonfiguration | 99,999.00 € *Stückpreis Standardkonfiguration | 0.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.58 € *Stückpreis Standardkonfiguration | 2.86 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.50 € *Stückpreis Standardkonfiguration | 4.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.23 € *Stückpreis Standardkonfiguration | 3.02 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 60 Arbeitstage | 5 Arbeitstage |
| Steckerform | Quadratisch | Quadratisch | - | - | - | - | Quadratisch | Rund | - | - | - | Quadratisch | - | - | - | - | - | Quadratisch | Quadratisch | Quadratisch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | Sonstige | Sonstige | - | - | - | - | - | - |
| D· E· F | DIN/Mini-DIN | DIN/Mini-DIN | Sonstige | Sonstige | Sonstige | - | - | - | Sonstige | - | - | DIN/Mini-DIN | Sonstige | Sonstige | Sonstige | - | - | DIN/Mini-DIN | - | - | - | Sonstige | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - | Sonstige | - |
| G·H·I | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | Sonstige |
| M·N·O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | Sonstige | - | - | - | Sonstige | - | Sonstige | - | - |
| P· Q· R | - | - | - | - | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | USB | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | - | Buchse (Buchse) / Sonstige | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | - | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | - | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | - | - | - | Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) |
| Anzahl der Adern | 128 | 15 ～ 48 | 60 ～ 140 | 2 | 20 ～ 80 | 16 ～ 128 | 10 ～ 60 | - | 80 ～ 168 | 10 ～ 64 | 10 ～ 96 | 64 | 20 ～ 100 | 20 ～ 80 | 1 ～ 5 | 15 ～ 32 | 68 | 20 ～ 100 | 8 ～ 64 | 4 ～ 5 | 10 ～ 64 x 2 | 40 ～ 140 | - | - | - | 2 ～ 12 | 5 | 2 ～ 6 | 2 ～ 144 | 2 ～ 24 | 45 | 60 ～ 140 | 60 ～ 140 | 5 ～ 25 | 1 ～ 20 | 6 ～ 64 | 5 ～ 10 | 2 ～ 10 | 2 ～ 50 | 68 | 50 | 20 | 25 ～ 32 | 8 | 68 |
| Anwendung | Für Leiterplatten | Für Leiterplatten / Sonstige | Platine-zu-Platine | Kabelanschluss / Für Leiterplatten | Platine-zu-Platine | Kabelanschluss / Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Für Leiterplatten / Platine-zu-Platine | Platine-zu-Platine | Kabelanschluss | Platine-zu-Platine | Platine-zu-Platine | Kabelanschluss / Für Leiterplatten / Plattenmontagen | - | Für Leiterplatten | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | - | - | - | - | - | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten / Sonstige | Sonstige | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Kabelanschluss / Für Leiterplatten | Kabelanschluss / Für Leiterplatten | Platine-zu-Platine | Kabelanschluss / Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Platine-zu-Platine | Kabelanschluss / Für Leiterplatten | Für Leiterplatten | Für Leiterplatten |
| Zulässiger Strom(A) | 2 | 6 ～ 15 | 0.4 | 5 | 0.5 | 2 | 1 | 10 | 0.3 | 3 | 2 | 3 | 0.5 | 0.5 | 22 ～ 30 | - | 0.5 | 2 | 1 | 1 | 1 ～ 3 | 0.5 | 15 | - | - | 10 | 15 | 10 | 3 | 1 | 0.5 | 0.3 | 0.4 | 3 | 3 | 3 | 5 | 1 | 1 | 0.5 | 0.5 | 2 | 0.5 | 0.5 | 0.5 |
| Zulässige Spannung(V) | AC 300 | AC 380 ～ AC500 | AC100 | AC / DC 500 | AC125 | AC 300 | 250 VAC | 150 ～ 300 | AC 50 | AC 300 | AC 300 | AC 300 | AC100 | AC100 | AC / DC 1000 | - | AC125 | AC 300 | AC 300 | AC 30 | 250 VAC ～ AC 300 | AC100 | 6/26/1908 | - | - | 300 | 300 | 300 | 300 | AC125 | AC 50 | AC 50 | AC100 | 250 VAC | 200 VAC | 200 VAC | 250 VAC | 200 VAC | 200 VAC | - | AC125 | AC 300 | AC125 | AC125 | AC125 |
| Verdrahtungsverfahren | Lötmittel | Lötmittel | Sonstige | Crimp / Sonstige | Sonstige | Crimp / Sonstige | Pressschweißen | Sonstige | Sonstige | Sonstige | Sonstige | Pressschweißen | Sonstige | Sonstige | Crimp / Sonstige | - | Sonstige | Lötmittel | Lötmittel | Lötmittel | Pressschweißen | Sonstige | Lötmittel | - | - | Sonstige | Befestigung mit Schrauben | - | - | - | Sonstige | Sonstige | Sonstige | Sonstige | Crimp / Sonstige | Crimp / Sonstige | Sonstige | Crimp / Sonstige | Crimp / Sonstige | Sonstige | Sonstige | Sonstige | Pressschweißen / Sonstige | Sonstige | Sonstige |
| Anschlussrichtung | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | - | Gerade | Winkel | Gerade / Winkel | - | Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Winkel | - | - | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade | Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Winkel | Gerade / Winkel | Gerade / Winkel | Winkel | Winkel | Winkel | Gerade / Winkel | Winkel | Winkel |
| Schutzfunktion (umweltbeständig) | N/A | N/A | - | - | - | - | N/A | - | - | - | - | N/A | - | - | - | - | - | N/A | N/A | N/A | - | - | - | - | - | - | - | - | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Repräsentativer Standard | - | UL | - | - | - | - | UL | UL / CSA | - | - | - | - | - | - | UL / CUL / TUV | - | - | UL / CSA | UL | - | - | - | - | - | - | UL / CSA | UL / CSA | UL / CSA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
-
Steckerform
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
- AC / DC 0,5
- 0.3
- 0.4
- 0.5
- 1
- 2
- 3
- 5
- 6
- 10
- 14
- 15
- 22
- 25
- 30
- 38
- 50
-
Zulässige Spannung(V)
- 6/26/1908
- AC 30
- 50
- AC 50
- AC / DC 50
- AC100
- AC125
- 150
- AC 150
- 200
- 200 VAC
- 250 VAC
- 300
- AC 300
- AC 380
- AC500
- AC / DC 500
- AC / DC 630
- 1000
- AC / DC 1000
-
Verdrahtungsverfahren
-
Anschlussrichtung
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Marke
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.