- Aufgrund des Taifuns in Japan / Tokio kann es bei einigen Produkten zu Lieferverzögerungen kommen. Wir bedanken uns für Ihr Verständnis.
- Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.
Fas-/Zentrierwerkzeuge（Coating Type：TiAlN）
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
ab∗ ： 12.86 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 33.22 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 42.88 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 31.10 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 90.93 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving
- Mengenrabatt
ab∗ ： 28.22 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
MISUMI
TiAlN coated type of the popular spot drill
- Mengenrabatt
ab∗ ： 11.44 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Vorbohrer, Hartmetall FX-Beschichtung FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
ab∗ ： 357.80 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 24.44 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 64.79 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 54.41 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide NC Spot Drill, Regular / Long Shack
MISUMI
Carbide spot drill that contributes to higher efficiency in chamfering
- Mengenrabatt
ab∗ ： 25.04 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long
MISUMI
Carbide center drill that's ideal for centering in mass production drilling
- Mengenrabatt
ab∗ ： 35.25 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill that's ideal for centering in mass production drilling
- Mengenrabatt
ab∗ ： 49.32 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack
MISUMI
A carbide countersink that's essential in chamfering and deburring
- Mengenrabatt
ab∗ ： 52.46 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model
MISUMI
A single tool with high efficiency that's capable of all centering, chamfering and V grooving
- Mengenrabatt
ab∗ ： 18.31 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN coated type of the popular center drill
- Mengenrabatt
ab∗ ： 11.61 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Center Drill, Long Model
MISUMI
The adoption of TiAlN coating with excellent wear resistance allows for the long service life and high-speed cutting.
- Mengenrabatt
ab∗ ： 16.95 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model
MISUMI
The 90° type that's simultaneously capable of chamfering
- Mengenrabatt
ab∗ ： 10.34 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Center Drill, R Model
MISUMI
R-shaped type that's ideal for precision machining
- Mengenrabatt
ab∗ ： 10.34 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model
MISUMI
Ideal for the hole chamfering of countersunk bolts with 90° chamfer.
- Mengenrabatt
ab∗ ： 19.75 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°
MISUMI
1-flute type with high versatility in countersink
- Mengenrabatt
ab∗ ： 19.15 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
TiAlN Coated High-Speed Steel Countersink, with Holes / 90°
MISUMI
It is effective in hole chamfering and deburring of light metals.
- Mengenrabatt
ab∗ ： 17.97 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Vorbohrer, Hartmetall-FX-Beschichtung, langer Schaft FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
ab∗ ： 130.54 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
2 Schneiden, Eckenabrundung Typ FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
- Mengenrabatt
ab∗ ： 61.45 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
2-Schneiden-Fräser für Spiralanwendungen FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Mengenrabatt
ab∗ ： 88.29 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
2-Schneiden-Fräser, langer Schaft, für Spiralanwendungen FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
ab∗ ： 84.50 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 57.76 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
FX-MG-CS X 60 Bohrungsfasen, 3-Nut-Senker, FX-beschichtetes Hartmetall 60° Serie
OSG
[Features]
· FX coating with excellent oxidation resistance- Mengenrabatt
ab∗ ： 119.56 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 45.87 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 33.56 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 199.88 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 296.90 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
FAGCCRC FA, beschichtetes Hartmetall, Eckenrundungsfräser
SANKO MFG
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machining- Mengenrabatt
ab∗ ： 89.73 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
FAGCCRCL FA, beschichtetes Hartmetall, Eckenrundungsfräser, langer Schaft
SANKO MFG
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· The long shank allows for machining in deep sections.
· FA GCCRC long shank end millab∗ ： 109.31 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
SAGCCC SA beschichtetes Hartmetall für Zentrierfase
SANKO MFG
Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.
ab∗ ： 88.09 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide.
- Mengenrabatt
ab∗ ： 27.35 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitze für die Momimen/Alle C32GUX
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
ab∗ ： 31.37 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitzen für die Decamomi T32GUX
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.
- Mengenrabatt
ab∗ ： 27.02 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 45.27 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitze zum Anfasen Fräser/RC-Schrägschneider/Baitender/T32MOR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
- Mengenrabatt
ab∗ ： 14.84 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Spitze zum Anfasen Fräser/RC-Schrägschneider/ Baitender TT32GUR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
- Mengenrabatt
ab∗ ： 19.24 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Einsatz X63GUR, Für Modell Gentlemen
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide / micro grain carbide.
- Mengenrabatt
ab∗ ： 57.65 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 28.12 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 15.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||
| Warenzeichen | FUJIGEN | Nine9 | Nine9 | FUJIGEN | WATERMILLS | MISUMI | MISUMI | OSG | FUJIGEN | NOGAJAPAN | Nine9 | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | NS TOOL | OSG | DIXI | ILIX | ILIX | ILIX | SANKO MFG | SANKO MFG | SANKO MFG | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN |
| Artikelserie | WATERMILLS ® 3-Nut Hartmetall-Senker WMCCTA 90° Hartmetall + TiAlN-Beschichtung | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack | TiAlN Coated Carbide Center Drill, 60° Chamfering Model / Regular, Long | TiAlN Coated Carbide Countersink, 3-Flute / 90°, Regular, Long Shack | TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model | TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model | TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model | Vorbohrer, Hartmetall-FX-Beschichtung, langer Schaft FX-LS-LDS | 2-Schneiden-Fräser, langer Schaft, für Spiralanwendungen FX-LS-SCC | FX-MG-CS X 60 Bohrungsfasen, 3-Nut-Senker, FX-beschichtetes Hartmetall 60° Serie | FAGCCRCL FA, beschichtetes Hartmetall, Eckenrundungsfräser, langer Schaft | Spitze zum Anfasen Fräser/RC-Schrägschneider/Baitender/T32MOR | Spitze zum Anfasen Fräser/RC-Schrägschneider/ Baitender TT32GUR | |||||||||||||||||||||||||||||||
| ab∗ | 12.86 € *Stückpreis Standardkonfiguration | 33.22 € *Stückpreis Standardkonfiguration | 42.88 € *Stückpreis Standardkonfiguration | 31.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 90.93 € *Stückpreis Standardkonfiguration | 28.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 357.80 € *Stückpreis Standardkonfiguration | 24.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 64.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 54.41 € *Stückpreis Standardkonfiguration | 25.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 52.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.15 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 130.54 € *Stückpreis Standardkonfiguration | 61.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 88.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 84.50 € *Stückpreis Standardkonfiguration | 57.76 € *Stückpreis Standardkonfiguration | 119.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 33.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 199.88 € *Stückpreis Standardkonfiguration | 296.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 89.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 109.31 € *Stückpreis Standardkonfiguration | 88.09 € *Stückpreis Standardkonfiguration | 27.35 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.37 € *Stückpreis Standardkonfiguration | 27.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 57.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.38 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage |
| Application | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Engraved | Centering (Positioning) / Engraved | Chamfering/Horizontal | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | - | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Hole Chamfer | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer | Hole Chamfer | Hole Chamfer | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Centering (Positioning) / Chamfering/Horizontal | Chamfering/Horizontal / Round Chamfer | Chamfering/Horizontal / Round Chamfer | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal |
| Tip angle (θ) | - | 90 | 45 ～ 60 | - | 90° | 60 ～ 120 | 90 | 90 | - | 45 | 145+90 | 90 ～ 120 | - | - | - | 90 | - | - | - | - | - | - | - | 90 | - | 90 | 90 | - | 60 | 90 | 90 | 90 | 90 | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Diameter (D)(mm) | - | 2–10 ～ 3~14 | 0.65～2.1 ～ 0.65～2.7 | - | 4.3 ～ 31 | 0.5 ～ 2 | 2 ～ 12 | 16 ～ 25 | - | 1.5 ～ 6 | - | 2 ～ 12 | 0.5 ～ 5 | 1 ～ 4 | 6.3 ～ 20.5 | 3 ～ 12 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 1 ～ 4 | 6.3 ～ 20.5 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 12.1 | 1 ～ 3.8 | 2 ～ 12 | 6.3 ～ 37 | 6.3,8.3,10.4,12.4,16.5,20.5 | 16.5,20.5,25.0,37.0 | 4 ～ 14 | 4 ～ 14 | 3 ～ 20 | - | - | - | - | - | - | - | - | - |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] | Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Resin[○] | - | - | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Stainless Steel[○] | - | - | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[◎] / Copper[○] / Resin[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | Stainless Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] | - | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] |
| Single blade, two blades | - | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | - | - | - | Single blade | Double-edged | Double-edged | Single blade | Single blade | Double-edged | Double-edged | Double-edged | Double-edged | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | Single blade | - | Single blade | Single blade | Single blade | - | - | - | - | - | - | - | - | - | - | - | - |
| Peripheral Blade Y/N | - | NA | NA | - | - | Available | NA | NA | - | - | - | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | NA | - | Available | Available | Available | NA | NA | Available | - | - | - | - | - | - | - | - | - |
| Tool Material Type | - | Carbide | Carbide | - | Carbide | Carbide | Cobalt HSS | Carbide | - | - | - | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | - | - | - | - | - | - | - | - | - |
| Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Coating Type | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | 0.1 ～ 5 | - | - | - | - | - | 0.5 ～ 5 | 0.5 ～ 5 | - | - | - | - | - | - | - | - | - | - |
Loading...
Konfigurieren
Stock
-
- Nur Lagerteile anzeigen
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Application
-
Centering (Positioning)
-
Hole Chamfer
-
Chamfering/Horizontal
-
V Groove
-
Round Chamfer
-
Engraved
-
Drilling
-
Other
-
Centering (Positioning)
-
Tip angle (θ)
- 0–90
- 5～85
- 15
- 20
- 25
- 30
- 35
- 40
- 45
- 45°
- 50
- 55
- 60
- 60°
- 60×120
- 65
- 65°
- 70
- 75
- 75°
- 80
- 90
- 90°
- Center Hole Angle: 90°
- Cutter Tip Angle: 100°
- 118
- 120
- 125°
- 130
- 135
- 145+90
-
Tool Diameter (D)(mm)
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.35
- 0.4
- 0.45
- 0.45～2.1
- 0.45～2.7
- 0.5
- 0.55
- 0.6
- 0.63
- 0.65
- 0.65～2.1
- 0.65～2.7
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1～2.12
- 1 to 2.5
- 1–6
- 1/8
- 1/16
- 1/32
- 1/64
- 1.1
- 1.2
- 1.25
- 1.25～2.65
- 1.3
- 1.4
- 1.5
- 1.5 to 4
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2～4.25
- 2~5
- 2–10
- 2～13
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.5 to 6.5
- 2.6
- 2.7
- 2.8
- 2.9
- 2.95
- 3
- 3–6
- 3–8
- 3~14
- 3 to 15
- 3/16
- 3～22
- 3/32
- 3/64
- 3.1
- 3.15
- 3.15～6.7
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4～8.5
- 4–10
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5～10.6
- 5–12
- 5/16
- 5/32
- 5/64
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6~15
- 6.2
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.3～13.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 8
- 8 to 17
- 8.2
- 8.3
- 8.4
- 8.8
- 9
- 9.1
- 9.4
- 9.5
- 9.52
- 10
- 10.0(+0.3)
- 10～21.2
- 10.1
- 10.3
- 10.4
- 10.5
- 10.8
- 11
- 11.1
- 11.2
- 11.4
- 11.5
- 11.88
- 12
- 12.1
- 12.3
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 13.5
- 14
- 14.2
- 14.4
- 14.5
- 14.6
- 15
- 15.0(+0.3)
- 15.1
- 15.2
- 15.4
- 15.5
- 15.6
- 15.87
- 16
- 16.15
- 16.3
- 16.5
- 16.5,20.5,25.0,37.0
- 17
- 17.1
- 17.7
- 18
- 18.2
- 18.5
- 18.6
- 19
- 19.05
- 19.5
- 20
- 20.0(+0.3)
- 20.5
- 21
- 21.5
- 21.77
- 22
- 22.3
- 22.4
- 22.5
- 23
- 23.4
- 23.5
- 24
- 24.5
- 25
- 25.0(+0.3)
- 25.20
- 25.3
- 25.4
- 26
- 26.5
- 26.6
- 27
- 27.5
- 28
- 28.5
- 29
- 29.9
- 30
- 30.0(+0.3)
- 30.20
- 30.5
- 31
- 31.5
- 31.7
- 31.9
- 32
- 32.6
- 32.7
- 33
- 33.1
- 33.3
- 34
- 34.1
- 34.8
- 34.9
- 35
- 35.4
- 35.5
- 35.9
- 36
- 36.9
- 37
- 37.1
- 37.9
- 38
- 39
- 39.83
- 40
- 41
- 42
- 43
- 45
- 45.6
- 46
- 47
- 48
- 49
- 49.85～134.6
- 50
- 50.7
- 51
- 52
- 52.8
- 53
- 53.6
- 53.91
- 54
- 54.3
- 55
- 56
- 56.8
- 57.0
- 57.9
- 58
- 58.2
- 60
- 61.4
- 62
- 62.2
- 63
- 64
- 64.6
- 65
- 66
- 67.4
- 67.94
- 69.2
- 69.8
- 70
- 71.8
- 72
- 73.3
- 74
- 75
- 75.5
- 76
- 80
- 90
- 95
- 100
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.5/1/1.5/2
- 0.5 to 4
- 0.5~5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1RM
- 1RY
- 1/2/3/4
- 1–3
- 1–5
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- 2RM
- 2RY
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3RM
- 3RY
- 3.25
- 3.5
- 3.75
- 4
- 4RM
- 4RY
- 4.25
- 4.5
- 4.75
- 5
- 5RM
- 5–10
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.25
- 8.5
- 8.75
- 9
- 9.5
- 10
- 10.5
- 11
- 11~15
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16–20
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
- XRM
- XRY
Suchergebnisse durch Herstellerauswahl einschränken
-
- FUJIGEN (23)
- NOGAJAPAN (6)
- OSG (6)
- GUHRING (5)
- ILIX (5)
- ATOM (3)
- Nine9 (3)
- SANKO MFG (3)
- WATERMILLS (3)
- YAMAWA MFG (3)
- DIXI (1)
- NS TOOL (1)
- OKAZAKI SEIKO (1)
- RUKO (1)
- EARTH MAN (0)
- H & H (0)
- UNION TOOL (0)
- STAR-M (0)
- FUKUDA (0)
- BIG Kaiser (0)
- SKC (0)
- SPEED TIGER (0)
- IWATA TOOL (0)
- 7 LEADERS (0)
- ATI (0)
- MAPAL (0)
- KOPAL (0)
- ASAHI TOOLS (0)
- TRUSCO NAKAYAMA (0)
- ALPEN (0)
- DAIICHITOOL (0)
- EIKOSHA (0)
- TAIYO-TOOL (0)
- NAKAJIMAKOUKI (0)
- DIJET (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Fas-/Zentrierwerkzeuge
-
- Hartmetall-Schaftfräser
- HSS-Fräser
- Schaftfräsen-Wendeschneidplatte/Halter
- Schaftfräser mit individueller gerader Schneide
- Spezialfräsen
- Drehwerkzeuge
- Bohreinsätze
- Schraubwerkzeuge
- Räumwerkzeuge
- Fas-/Zentrierwerkzeuge
- Schneidwerkzeuge und Zubehör
- Stufenbohrer
- Lochsägen
- Schlüsselschneider
- Kernbohrer (Spitze)
- Magnetbohrmaschinen-Schneider
- Bohrspitzen für Elektrobohrer
- Schneidwerkzeuge für Holzbohrer
- Betonbohrer
Bezahlverfahren
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.