FUJI LATEX Stoßdämpfer (Zubehör)（Grundkorpus, Zubehör：Dazugehörige Komponenten）

?* Informationen zur Lieferzeit und Preisen

• 

  FK-Serie Muttern

  FUJI LATEX

  [Merkmale] Standardmutter für Stoßdämpfer der Serie FK.

  ab∗ ：	1.85 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  FA-1010D-Serie Optionale Teile [Halteklammer]

  FUJI LATEX

  Dedicated fitting for FA-1010D series.
  
  [Features]
  ・Fitting for FA-1010D series.

  2D CAD Daten verfügbar

  ab∗ ：	3.36 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  FA-1212C-Serie Optionale Teile [Schalldämpfer-Kappe]

  FUJI LATEX

  The sound absorbing cap decreases the impact noise when a load collides against the damper. The stroke is 11 mm when this sound absorbing cap is used.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	2.41 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Muttern) OP-M42

  FUJI LATEX

  This is a dedicated round nut for the assembly of FA-4225B/FA-4250B/FA-4275B series.

  2D CAD Daten verfügbar

  ab∗ ：	12.26 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010PB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	16.34 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010SB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	15.30 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  FPD-1012-Serie optionale Teile [Adapter nur für AC]

  FUJI LATEX

  Dedicated adapter for mounting FPD-1012 series products are available in three types of shapes according to the use statuses and shapes of dampers.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	0.73 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Abdeckkappen für Industriestoßdämpfer / OP-090M36B

  FUJI LATEX

  The sound absorbing cap decreases the impact noise when a load collides against the damper.

  2D CAD Daten verfügbar

  ab∗ ：	12.71 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zubehörteil (Stoppermutter) OP-020EB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	8.83 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020FB

  FUJI LATEX

  Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.

  2D CAD Daten verfügbar

  ab∗ ：	10.66 €
  Minimum Lieferzeit ：	15 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zubehörteil (Stoppermutter) OP-020GB

  FUJI LATEX

  Prevent direct application of bottoming (drag generated when a mechanical collision occurs at the stroke end) to the end of the damper. Make sure to use this when an external stopper is not available.

  2D CAD Daten verfügbar

  ab∗ ：	10.33 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020HB

  FUJI LATEX

  This product prevents bottoming (resistance generated when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  ・Adjust and tightly fasten the nut so that the stoppage 1 mm before the stroke end can be ensured, allowing for reliable fixing into place of the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	3.58 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zubehörteil (Stoppermutter) OP-020KB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · The main body holder with switch can be ordered separately, but it is recommended to order it together with the main body.
  · In the case, please notify us the model name of the main body.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	4.40 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020LB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	30.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020PB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	3.52 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020RB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	3.55 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020SB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	2.65 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020TB

  FUJI LATEX

  This product prevents bottoming (resistance generating when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.
  
  [Features]
  · Adjust to stop 1 mm before the stroke end, and fix firmly with the main body nut.

  2D CAD Daten verfügbar

  ab∗ ：	39.56 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Stoppermutter) OP-020UB

  FUJI LATEX

  This product prevents bottoming (resistance generated when the stroke end is mechanically impacted) from directly acting on the end of the damper. Be sure to use it when there is no external stopper.

  2D CAD Daten verfügbar

  ab∗ ：	42.11 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010EB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.

  2D CAD Daten verfügbar

  ab∗ ：	42.90 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zubehörteil (Deklinationsadapter) OP-010FB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	91.35 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010GB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees used in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	94.07 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010KB

  FUJI LATEX

  Damper durability is improved if the use conditions angle is eccentric. It can also be used as a stopper nut. The maximum usable eccentric angle is 10º.

  2D CAD Daten verfügbar

  ab∗ ：	17.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010M8

  FUJI LATEX

  Can be used to improve the damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  ・Use in conjunction with FA-0806-S.
  ・The maximum eccentric angle is ±10 degrees used in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	16.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010PMB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.

  • Mengenrabatt

  2D CAD Daten verfügbar

  ab∗ ：	15.42 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010RB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	20.20 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010TB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. In addition, it can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body tightly at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees used in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	115.34 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010UB

  FUJI LATEX

  Durability can be improved in use conditions where the eccentric angle is effective. It can also be used as a stopper nut. The maximum use eccentric angle is 10 degrees.

  2D CAD Daten verfügbar

  ab∗ ：	141.36 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Deklinationsadapter) OP-010XB

  FUJI LATEX

  Can be used to improve damper durability when usage conditions involve an eccentric angle. It can also be used as a stopper nut. The maximum eccentric angle is 10 degrees.
  
  [Features]
  · Screw the eccentric angle adapter into the main body until the eccentric angle cap is securely fitted with the piston rod, and screw in the nuts on the main body securely at this position.
  · Use it when the eccentric angle is 2.5 degrees or more.
  · The main body can also be used as a stopper.
  · Use together with a capless soft absorber.
  ・The maximum eccentric angle is ±10 degrees in conjunction with the eccentric angle adapter.

  2D CAD Daten verfügbar

  ab∗ ：	22.35 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Flansch quadratische Ausführung) OP-040 M42SF

  FUJI LATEX

  Mounting square flange dedicated for FA-4225B/FA-4250B/FA-4275B series.

  2D CAD Daten verfügbar

  ab∗ ：	55.51 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spritzwasserfeste Abdeckkappen / FK-2016□-C-060

  FUJI LATEX

  Useful for usage in an environment where liquid such as oil scatters. Basically, use with face up. Drip proof is ineffective when used on side or face down. This product is offered with the main body as a set.

  2D CAD Daten verfügbar

  ab∗ ：	109.94 €
  Minimum Lieferzeit ：	14 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spritzwasserfeste Abdeckkappen / F□□-1210M□□-C-060

  FUJI LATEX

  Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.

  2D CAD Daten verfügbar

  ab∗ ：	72.52 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spritzwasserfeste Abdeckkappen / F□□-1410R□□-C-060

  FUJI LATEX

  Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.

  2D CAD Daten verfügbar

  ab∗ ：	77.75 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehörteil (Spritzwasserfeste Abdeckkappe) F□□-1612X□□-C-060

  FUJI LATEX

  Useful in an environment where liquids such as oil scatter. Basically, use with face up. Drip-proofing is ineffective when used horizontally or face down. This product is offered with the main body as a set.

  2D CAD Daten verfügbar

  ab∗ ：	104.47 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...