HIROSE ELECTRONIC Rechteckstecker

?* Informationen zur Lieferzeit und Preisen

• 

  Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC

  HIROSE ELECTRONIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  • Mengenrabatt

  ab∗ ：	0.14 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D

  HIROSE ELECTRONIC

  A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
  
  [Features]
  • Metal shell makes it compact and sturdy.
  • Connectors can be mounted on the chassis, or on the front or back sides of the panel.
  • Height of the wiring side is greatly reduced to facilitate more compact sets.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  • Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
  • Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

  • Mengenrabatt

  ab∗ ：	7.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.65 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder für interne Stromversorgung mit 3,5 mm Rastermaß – Serie MDF6【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.19 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-10,000 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.14 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtverbinder für Anschluss, Baureihe DF3 (Raster 2 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	0.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckergehäuse D-Sub-Steckverbinder (EMI-Abschirmung) , Serie CTH

  HIROSE ELECTRONIC

  These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
  
  [Features]
  · Because the lock mechanism is a screw type mechanism it is rugged and reliable.
  · Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
  · In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
  • Use screws to ground the drain wire of the cable with a clamp.
  • Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
  • For FD*D, however, wire a fused I/O cable when using the case.
  • CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

  • Mengenrabatt

  ab∗ ：	11.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Multifunktionaler Steckverbinder, zweiteilig, mit halbem Rastermaß, Serie FX2

  HIROSE ELECTRONIC

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  • Mengenrabatt

  ab∗ ：	2.05 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel- / FPC- / Koaxialkabel (dünn) -Steckverbinder (1 mm Rastermaß) – Serie DF19【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
  In-stock custom products cannot be returned or canceled. Thank you.

  • Mengenrabatt

  ab∗ ：	0.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Diskreter Drahtsteckverbinder für den Anschluss, Baureihe DF1B (2,5 mm Raster)【1-10,000 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
  
  [Features]
  · A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
  · By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
  · Terminals can be replaced after wires are connected, allowing ease of maintenance.
  · Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
  · Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
  · Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
  · A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.02 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  D-Sub-Steckverbinder (Lötverbindung) – Serie HD

  HIROSE ELECTRONIC

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  • Mengenrabatt

  ab∗ ：	3.31 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD

  HIROSE ELECTRONIC

  A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
  · As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
  · The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
  · A connection press can also be used.

  • Mengenrabatt

  ab∗ ：	12.81 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  E / A-Steckverbinder mit halbem Rastermaß (Originalausführung) , Serie DX

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Mengenrabatt

  ab∗ ：	6.21 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  E / A-Steckverbinder mit halbem Rastermaß (für Fanuc-Servoverstärker) , Serie FI

  HIROSE ELECTRONIC

  This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
  
  [Features]
  ・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
  ・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
  ・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
  ・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
  ・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

  • Mengenrabatt

  ab∗ ：	5.01 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  E / A-Steckverbinder mit halbem Rastermaß (Universalausführung) , Serie DX*M

  HIROSE ELECTRONIC

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Mengenrabatt

  ab∗ ：	3.14 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6

  HIROSE ELECTRONIC

  Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
  
  [Features]
  ・Product variation: connection methods include board-to-board model and cable pressure connection.
  ・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
  ・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
  ・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

  • Mengenrabatt

  ab∗ ：	1.98 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM

  HIROSE ELECTRONIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  • Mengenrabatt

  ab∗ ：	7.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / 2-reihiger, mehrpoliger Board-to-Cable-Steckverbinder mit 1 mm Rastermaß, Serie DF20【100 Stk. pro Packung】

  HIROSE ELECTRONIC

  [Features]
  · This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
  · Contributing to a high-density board mounting.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	13.76 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F

  HIROSE ELECTRONIC

  This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
  
  [Features]
  ▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
  ▪ Compatibility: pin header compatible with HIF3B series.

  • Mengenrabatt

  ab∗ ：	1.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flacher Steckverbinder mit 2,54 mm Rastermaß, Serie HIF3FC

  HIROSE ELECTRONIC

  A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
  
  [Features]
  ・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
  ・Low profile: pin heads are at a low height of 9.2 mm.
  ・The space between circuit boards when stacking is 12.2 mm.

  • Mengenrabatt

  ab∗ ：	1.18 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Steckverbinder / Diskreter Anschlussdraht, Baureihe DF1E (Raster 2,5 mm)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	0.27 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Platine-in-Platine-zu-Kabel-Steckverbinder mit 2 mm Rastermaß, Serie DF4

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Mengenrabatt

  ab∗ ：	0.04 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (2 mm Rastermaß, zwei Reihen-Stifte) – Serie DF11【1-500 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
  
  [Features]
  · On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
  · Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
  · A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
  · In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
  · Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
  · Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.19 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder Serie DF33 für Interne Stromversorgung mit 3,3-mm-Rastermaß【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

  • Mengenrabatt

  ab∗ ：	0.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder für Flachbandkabel, kompatibel mit 3 A, Serie HIF4

  HIROSE ELECTRONIC

  Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
  
  [Features]
  · Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
  · With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
  · With an automatic extraction lever with lock release, an extraction tool is not required.
  · Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

  • Mengenrabatt

  ab∗ ：	4.07 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder mit Verriegelung für Interne Stromversorgung, kompatibel mit Verguss mit 5 mm Rastermaß – Serie DF5【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.
  
  [Features]
  · Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
  · Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
  · Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
  · Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
  · Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
  · 8 A current rating: Can carry a maximum current of 8 Amperes.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.09 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Steckergehäuse D-Sub-Steckverbinder (Kunststoff) , Serie CTF

  HIROSE ELECTRONIC

  These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.
  
  [Features]
  · Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
  • Made of strong ABS resin, so they are lightweight and sturdy.
  • The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
  • Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
  • 25-contact models are plug cases for modems as defined in JIS-C-6361.
  • Easily incorporated using solder (HD type) or crimping (CD type).

  • Mengenrabatt

  ab∗ ：	3.83 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD

  HIROSE ELECTRONIC

  A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  · The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
  · Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
  · With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
  · The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

  • Mengenrabatt

  ab∗ ：	4.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D

  HIROSE ELECTRONIC

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  • Mengenrabatt

  ab∗ ：	4.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
  
  [Features]
  · Has a metal shell and so is small and lightweight.
  · Connector mounting can be performed on the chassis, front or back, or one of the sides.
  · The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
  · The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.16 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  D-Klemmen-Steckverbinder, Serie DX*LM

  HIROSE ELECTRONIC

  The D terminal connector is for digital broadcast devices.
  
  [Features]
  ・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
  ・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
  ・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
  ・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
  ・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
  ・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

  • Mengenrabatt

  ab∗ ：	1.40 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse mit Abdeckung für Serie HIF3B

  HIROSE ELECTRONIC

  This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

  • Mengenrabatt

  ab∗ ：	5.15 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß) , unterstützt Serie LVDS – FX15

  HIROSE ELECTRONIC

  A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	1.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DeviceNet-kompatibler Steckverbinder, Serie HR31

  HIROSE ELECTRONIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Mengenrabatt

  ab∗ ：	1.10 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder Serie QR / P1【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Compact, high-density mounted, rectangular multipole rack/panel plug-in connector QR/P. Compact crimp terminals divided into power supply and signal use.
  
  [Features]
  · The terminals have smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  · The housing internal pinout has pin 12 opposing pin 2 on one side, pins 8, 24 opposing pin 2 on both sides (total: 4 pins), and pin 32 opposing pin 3 on one side (total: 6 pins) with a greater distance of separation from other pins. These terminal pins feature a creepage distance that can adequately withstand high voltages. Therefore, the terminals can be used as power supply terminals.
  · Additionally, a flame retardant material (UL9V-0) is used for the insulating material.
  · Guide pins are metallic to withstand coupling impact.
  · Installation to a panel or rack is achieved via a floating bush. Therefore, insertion and removal do not require the application of excessive force.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	3.75 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P4

  HIROSE ELECTRONIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  ab∗ ：	3.13 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P6

  HIROSE ELECTRONIC

  Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  · The terminals are made compact by segregating according to those for power and those for signals.
  • The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
  • The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  ab∗ ：	2.86 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P8

  HIROSE ELECTRONIC

  • Compared to the QR/P4 Series products with the same number of cores, dimensions are decreased by 20% through the use of a rectangular plug-in connection and multipolar rack and panel connector. • A terminal for power supplies with 2 poles on both sides is set up in a reinforced area of the guide pin of the housing.
  
  [Features]
  • Compared to conventional QR/P4 Series products with the same number of cores, these models have a small size width approximately 20% narrower.
  • By positioning both sides of the 2-pole structure in the reinforced area of the guide pin of the housing, the design uses 5.3-mm pitches for a small size that is also durable enough to withstand high voltage, and can be used for power supplies.
  • In addition, terminals for signals are positioned with a 2-mm pitch.
  • The terminal for power supplies with 2 poles on both ends features holes that can be used for wire connections with AWG #20 - #24 wires.
  • Other terminals for signals have holes that can be used for wire connections with AWG #24 - #28 wires.
  · The terminals have stable contact pressure through point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • The small design features guide pins and insulation joined in a single body shape.
  • Mounting to the panel or the rack uses a stepped screw system to fix the product in a floating place, allowing for comfortable insertion and removal operations.
  • This product has obtained UL, CSA, and TUV certifications.

  • Mengenrabatt

  ab∗ ：	0.16 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, Serie QR / P【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
  
  [Features]
  · The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
  • Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
  • For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
  • In addition, the insulation is a flame retardant material (UL9V-0).
  • Guide pins are made of metal for the durability to withstand coupling shocks.
  • Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

  • Mengenrabatt

  ab∗ ：	0.50 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kleiner rechteckiger Schnittstellen-Steckverbinder mit langer Lebensdauer, Serie 3500

  HIROSE ELECTRONIC

  This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.
  
  [Features]
  • This connector has a long service life and can be inserted and removed up to 20,000 times.
  • The terminal structure has high reliability, and is a 2-point contact bellows type.
  • In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.
  • By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.
  • Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.
  • The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.
  • Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.
  • The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.
  • Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.
  • Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

  • Mengenrabatt

  ab∗ ：	6.89 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder Serie MDF51 für hohe Spannungsfestigkeit (3000 V) , Platine mit Verriegelung im Lieferumfang enthalten

  HIROSE ELECTRONIC

  This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
  
  [Features]
  • Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
  • This also prevents accidents resulting from partial mating.
  • Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
  • Also, the mating surface has a large guiding area to make insert operations easier to perform.
  • Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
  • Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
  • Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
  • UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).

  • Mengenrabatt

  ab∗ ：	0.30 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack- und Platten-Steckverbinder, klein, Serie QR / P15

  HIROSE ELECTRONIC

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  • Mengenrabatt

  ab∗ ：	2.44 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kleiner rechteckiger Schnittstellen-Steckverbinder, Serie 3200

  HIROSE ELECTRONIC

  This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.
  
  [Features]
  • A receptacle connector board implementation surface with a height of the 2.9 mm.
  • The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
  • This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
  • This receptacle connector can also be prepared in an embossed packaging product format.
  • This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
  • A latch lock is applied to both sides for mating processes.
  • This lock is implemented with the minimum space possible, and helps downsize your product set.
  • Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
  • The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
  • The number of pins available is either 8 or 10.

  • Mengenrabatt

  ab∗ ：	2.24 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
  
  [Features]
  · The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
  · Connector units are available in soldering, wrapping, or crimping types.
  · Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.

  • Mengenrabatt

  ab∗ ：	0.55 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Extrem flacher, rechteckiger Steckverbinder – Serie LX

  HIROSE ELECTRONIC

  An ultra-low-profile interface connector with a mounting height of 2.0 mm. While being ultra low-profile, provides toughness and excellent contact reliability, contributing to the slimming of devices.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	3.02 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...