TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

TAKIGEN Schwenkgriffe

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

Lieferzeit	Alle Produkte Versand am selben Tag 5 Tage oder weniger 6 Tage oder weniger 10 Tage oder weniger 11 Tage oder weniger 13 Tage oder weniger 14 Tage oder weniger 15 Tage oder weniger 16 Tage oder weniger 17 Tage oder weniger

?* Informationen zur Lieferzeit und Preisen

Edelstahl Flachgriff A-1970-A

TAKIGEN

[Features]
· Resin mold cover attached to the back surface to improve waterproofness.
· (A-1970-A-2WP).
· Temporary fixation can be done with a dedicated mounting plate, which improves workability.
· (A-1970-A-2WP).
· Made of stainless steel, corrosion resistant.
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to distortion of the housing.
· Press manufactured to be lightweight.
· Left and right dual use (the standard product is set for right hand opening. Please inquire when using for left opening).

2D / 3D CAD Daten verfügbar

ab^∗ ：	58.36 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Dünnen, flacher Schwenkhebel A-1464

TAKIGEN

[Features]
· Waterproof type (using O ring and sheet packing).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-464-L-TAK60).
· Panel drilling dimensions are compatible with A-160· A-240 series, etc.
· Left/right combination type (exchange left and right by turning over the cam)

2D / 3D CAD Daten verfügbar

ab^∗ ：	93.48 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Flachschwenkhebel A-1475

TAKIGEN

[Features]
· Fire resistant, heat resistant, salt resistant and acid resistant (A-1475).
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to the distortion of the housing.
· Stainless steel flush handle is compatible with A-1260 for installation.
· Left and right hand use (you can exchange left and right by turning the stopper over)

2D CAD Daten verfügbar

ab^∗ ：	105.94 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Flachgriff mit Druckknopf A-260-A

TAKIGEN

[Features]
· Galling prevention type stopper is standard equipment.
· Panel drilling dimensions are the same as A-240.
· Left and right hand use (you can exchange left and right by turning the stopper over)

2D / 3D CAD Daten verfügbar

ab^∗ ：	30.58 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Kompakter Flachgriff A-250

TAKIGEN

Left and right hand dual use (exchange left and right by turning over the stopper)

[Features]
· Left and right hand dual use (exchange left and right by turning over the stopper)

Mengenrabatt

2D CAD Daten verfügbar

ab^∗ ：	12.85 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Gebogener Flachgriff A-150

TAKIGEN

[Features]
· Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

2D / 3D CAD Daten verfügbar

ab^∗ ：	16.38 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Anzugsflachgriff A-474

TAKIGEN

Total length (mm): 125· Total width (mm): 38· Total height (mm): 26.7 · Applicable plate thickness (mm): 4
· Material: Zinc alloy / Finish: Satellite chrome plating / Stopper: Included

2D / 3D CAD Daten verfügbar

ab^∗ ：	49.76 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Flachgriff mit Notfluchtgerät, A-265

TAKIGEN

[Features]
· Open from the inside using the emergency escape device, even when locked from the front side.
· Keyless type can be locked easily with a coin.
· Compatible with panel drilling dimensions of conventional handle

2D CAD Daten verfügbar

ab^∗ ：	16.51 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Flachgriff A-230

TAKIGEN

[Features]
· Standard equipped clasp is an anti-scratch type.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (A-230-TAK60).
· Left and right hand dual use (exchange the left and right by turning the stopper over).
· Panel drilling dimensions are the same as A-240

2D CAD Daten verfügbar

ab^∗ ：	36.40 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Flachgriff A-240-A

TAKIGEN

[Features]
· Standard equipped clasp is an anti-scratch type.
· The lock includes a new reversible key TAK60, with a dust-proof shutter with excellent operability as standard equipment.
· A soft design with R's on it.
· Panel drilling dimensions are the same as A-240.
· Left and right hand dual use (exchange the left and right by turning the stopper over).

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	21.87 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Flachgriff A-910

TAKIGEN

[Features]
· Left and right dual use (exchange left and right by turning over the stopper)

2D / 3D CAD Daten verfügbar

ab^∗ ：	20.78 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Plastikabdeckung für Modell A-464, A-464-PC

TAKIGEN

[Features]
· Compatible with A-464 series.
· Install on 464 series to improve corrosion resistance and dust prevention (IP × 3)

2D / 3D CAD Daten verfügbar

ab^∗ ：	6.22 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichte Dichtung für A-464, A-464-WP

TAKIGEN

[Features]
· Optimum packing for outdoor / waterproof specifications.
· "Fins" on the outer circumference and "ribs" inside prevent water from getting in.
· Replace the standard packing and install it

ab^∗ ：	2.88 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Kautschukkappe für A-481, A-481-RC

TAKIGEN

[Features]
· Protects the handle, improves dust resistance and corrosion resistance.
· A-481-RC-4N is a bag shape.
· EPDM is suitable for outdoor use because it is made of durable and weather resistant material

2D / 3D CAD Daten verfügbar

ab^∗ ：	9.79 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Außendichtungs-Griff A-413

TAKIGEN

[Features]
· Rotate the handle lever to obtain a rod stroke of 32 mm.
· Multi-point tightening is possible.
· In order to attach the handle to the outside of the packing, it is not necessary to apply caulking, etc. to the handle mounting part when waterproofing is required.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment.
· Left and right dual use type (it is possible by turning over the gearbox)

2D / 3D CAD Daten verfügbar

ab^∗ ：	124.88 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Außendichtungs-Griff A-462

TAKIGEN

[Features]
· No caulking, etc. is required on the handle mounting part when the handle is attached to the outside of the packing.
· Install the handle outside the sealing area, and effectively use the space inside the cabinet.
· Large stroke (32 mm) can be obtained with a slim body.
· Even if the size of the housing changes, it is not necessary to change the length of the rod.
· For rod seat, the recommended hinge B-71-3 is compatible with installation.
· Panel drilling of the handle is also vertically symmetrical, so design of the housing can be done easily (no need to select door arbitrarily).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (A-462-1-1-TAK60).
· For right / for left / with keys / without keys

2D CAD Daten verfügbar

ab^∗ ：	96.08 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Außendichtungs-Griff A-463

TAKIGEN

[Features]
· 3 point tightening mechanism developed for the outside system.
· No caulking, etc. required on the mounting part for attaching the handle to the outside of the packing.
· Large stroke can be obtained with a slim body.
· Upper and lower rod ends use plastic rollers, and the operation is smooth.
· For rod seat, recommended hinge B-71-3 is compatible with installation.
· Therefore, we do not choose right or left side use of the door (panel cut is also vertically symmetrical). Even if the size of the housing changes, it is not necessary to change the length of the rod.
· Small and slim pin tumbler lock with high security is used.
· Left/right combination type (exchange left and right by turning over the control center)

2D CAD Daten verfügbar

ab^∗ ：	96.76 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Automatik-Verschluss Spülgriff (Zylinderverschluss-Model) A-480-A

TAKIGEN

[Features]
· Includes new, easy to operate, reversible TAK60 key and dust-proof shutter as standard equipment.
· One-touch mechanism (open and lock).
· Waterproof type (using O ring and sheet packing).
· Lock has a dust proof shutter.
· Left/right combination type (exchange left and right by turning over the cam).

2D / 3D CAD Daten verfügbar

ab^∗ ：	49.44 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Klappgriff mit Schutzring, A-417-F

TAKIGEN

[Features]
· Japan Vending Machine Industry Association standard locks can be incorporated.
· Reinforce the cylinder part with a hardened guard ring.
· Protects from drill and other damages.
· Can protect important parts inside the handle.
· Prevents damage and unlocking by forced rotation of the lock.
· Prevention mechanism for forcibly picking the lock.
· Reliable locking by the double latch mechanism.
· Lock can be easily replaced with 1 Phillips screwdriver.
· One action lock activated just by pushing the handle.
· Use personal coin lock (C-288) for the standard lock.
· Left/Right combination type.

2D / 3D CAD Daten verfügbar

ab^∗ ：	67.96 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Eingelassener Griff für Getriebe A-248

TAKIGEN

[Features]
· Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-248-1-TAK60).
· Slim body, ideal for a cabinet with a small installation space.
· Waterproof type (using O ring and sheet packing).
· Fix the door tightly with ø4 bar rod.
· Quick bush is used for installation of bar rod with one touch.
· For right side

2D CAD Daten verfügbar

ab^∗ ：	35.03 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Rostfreier Edelstahl Bündige Griffleiste mit automatischer Verriegelung A-1480

TAKIGEN

[Features]
· Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-1480-TAK60).
· Made of stainless steel, corrosion resistant.
· Waterproof type (using O ring and sheet packing).
· Waterproof standard IP x 3 compatible.
· Left/right combination type (exchange left and right by turning over the cam)

2D CAD Daten verfügbar

ab^∗ ：	182.60 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Schmaler Flachschwenkhebel A-446

TAKIGEN

[Features]
· Conforms to Cabinet Industry Association (CA-G02) "Handle quality demands" (A-446).
· Thin type with a depth of 12.5 mm from the mounting surface to the stopper.
· Flat handle A-160· A-240 series panel drilling dimensions can also be installed.
· Waterproof type (using O ring and sheet packing).
· Left /right combination type (exchange left and right by turning over the cam)

2D / 3D CAD Daten verfügbar

ab^∗ ：	13.53 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff mit Druckknopf A-1260

TAKIGEN

[Features]
· Stainless steel product with excellent corrosion resistance.
· Left and right hand use (you can exchange left and right by turning the stopper around

2D CAD Daten verfügbar

ab^∗ ：	105.94 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionsfunktion, A-1481-F

TAKIGEN

[Features]
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-1481-F / A-481-F) The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
· Waterproof type (using O ring and sheet packing).
· Left/right combination type (exchange left and right by turning over the cam)

2D CAD Daten verfügbar

ab^∗ ：	115.51 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionfunktion, A-1481-N

TAKIGEN

[Features]
· The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
· Waterproof type (using O ring / sheet packing)· Left/right combination type (exchange left and right by turning over the cam and stopper

2D / 3D CAD Daten verfügbar

ab^∗ ：	101.14 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Griffmuschel für Vorhängeschloss A-1464-1-PDL

TAKIGEN

[Features]
· Can be locked with a padlock (cord diameter ø6).
· The part where the padlock is hung is on the handle lever side, and does not interfere with operation.
· A-1461-1 can be installed with the same panel cuts.
· Depth to the stopper is 12.5 mm, and the space inside the enclosure can be effectively used.
· Left/right combination type (exchange left and right by turning over the cam)

2D CAD Daten verfügbar

ab^∗ ：	115.51 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Dünnen, flacher Schwenkhebel A-1464-C

TAKIGEN

ab^∗ ：	122.22 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Stainless Steel dünner wasserdichter Flachgriff A-1494

TAKIGEN

[Features]
· Ultra thin type with a depth of 13 to 22 mm from the mounting surface to the stopper.
· Waterproof type (using O ring and sheet packing).
· Improved rust prevention satellite chrome plating (25 μm).
· Fire resistant, heat resistant, saltwater resistant and acid resistant.
· Left/right combination type (exchange left and right by turning over the cam).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment

2D / 3D CAD Daten verfügbar

ab^∗ ：	101.14 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1230-A

TAKIGEN

[Features]
· Galling prevention type stopper is standard equipment.
· Left and right hand dual use (exchange left and right as you turn the stopper over), panel drilling dimensions are the same as A-240

2D CAD Daten verfügbar

ab^∗ ：	134.68 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1240-B

TAKIGEN

[Features]
· Galling prevention type stopper is standard equipment.
· The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter.
· Fully curved for a soft design.
· Panel drilling dimensions are the same as A-240.
· Left and right hand use (you can exchange left and right by turning the stopper over)

2D CAD Daten verfügbar

ab^∗ ：	105.94 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1251

TAKIGEN

[Features]
· Left and right dual use (exchange left and right by turning over the stopper)

2D / 3D CAD Daten verfügbar

ab^∗ ：	91.55 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1600-A

TAKIGEN

3D CAD Daten verfügbar

ab^∗ ：	47.70 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1700

TAKIGEN

2D / 3D CAD Daten verfügbar

ab^∗ ：	26.07 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Edelstahl Flachgriff A-1900

TAKIGEN

2D CAD Daten verfügbar

ab^∗ ：	91.27 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichter Edelstahl-Flachgriff A-1465-C

TAKIGEN

[Features]
· The lock comes standard with the TAK60, a new style of reversible key with easy to use dust-proof shutter (A-1465-C and A-465-F).
· Flat handle A-160· A-240 series panel drilling dimensions can also be installed.
· Left and right combination

2D / 3D CAD Daten verfügbar

ab^∗ ：	91.95 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichter Edelstahl-Flachgriff A-1485-F

TAKIGEN

2D / 3D CAD Daten verfügbar

ab^∗ ：	101.14 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Wasserdichter Edelstahl-Flachgriff A-1950-A

TAKIGEN

2D / 3D CAD Daten verfügbar

ab^∗ ：	137.67 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Messuhr-Sperre Flachgriff A-464-DL

TAKIGEN

[Features]
· Unlock by merely matching the code number of the code (dial), with no need to manage subordinate keys.
· High security lock TAK built-in series that can be unlocked with a key.
· Effective for individual system and master system with integrated administrator.
· Code is 4 digits from 0 to 9, and 10,000 combinations are possible.
· Change of PIN number can be done with one lever operation easily.
· A-160-1 A-240-1· A-464-1, etc. are compatible for installation.
· For both left hand and right hand use

2D CAD Daten verfügbar

ab^∗ ：	96.76 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Kunststoff-Schwenkhebel AP-483

TAKIGEN

Mengenrabatt

Auf Lager

2D / 3D CAD Daten verfügbar

ab^∗ ：	16.60 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Schwenkhebel mit Kunststoff-Staubschutzkappe AP-493

TAKIGEN

[Features]
· Dust proof cap is provided as standard equipment to protect the lock from rainwater and dust.
· Uses convex packing of soft rubber molding. Improved adhesion.
· Temporary fixing boss is provided on the mounting plate, and workability has improved.
· The lock includes a new reversible key TAK60, with a dust-proof shutter with excellent operability as standard equipment.
· Panel drilling dimensions are compatible with A-160· A-240 series.
· Left /right combination type (exchange left and right by turning over the cam)

2D / 3D CAD Daten verfügbar

ab^∗ ：	22.00 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Klappgriff A-403

TAKIGEN

[Features]
· Fewer protrusions on the panel attachment surface, eliminating the harmful effects caused by the protrusions.
· For easy opening and closing of the door, insert and rotate the key to pop up the handle.
· Left / right dual use type (you can exchange the left and right by turning over the cam)

2D / 3D CAD Daten verfügbar

ab^∗ ：	54.03 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Klappgriff A-403-A

TAKIGEN

[Features]
· A-403 personal coin lock on the lock (C-288 type).
· Plenty of key variations.
· The protrusion from the panel mounting surface is 9.5 mm, so harm caused by protrusion is eliminated.
· For easy opening and closing of the door, insert and rotate the key to pop up the handle.
· Left / right dual use type (you can exchange the left and right by turning over the cam)

ab^∗ ：	107.73 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Klappgriff A-408

TAKIGEN

[Features]
· Japan Vending Machine Industry Association standard product locks can be incorporated.
· Double safety mechanism of tightening plus locking.
· Standard lock uses a personal coin lock (C-288).
· Optional 3 point electric lock can be attached (when the handle is forcibly unlocked, solenoids on the top and bottom of the door work, locking the door)

2D CAD Daten verfügbar

ab^∗ ：	70.70 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Klappgriff A-421

TAKIGEN

[Features]
· Japan Vending Machine Industry Association standard product locks can be incorporated.
· Lock forcible key removal prevention mechanism.
· Reliable locking by the double latch mechanism.
· One action locking by pushing the handle.
· Pop handle mini A-407 is a more sturdy type.
· Dimensions of panel drilling are the same.
· Standard lock uses a personal coin lock (C-288).
· Left / right dual use type (you can exchange the left and right by turning over the cam)

2D / 3D CAD Daten verfügbar

ab^∗ ：	100.87 €
Minimum Lieferzeit ：	10 Arbeitstage

*Stückpreis Standardkonfiguration

Klappgriff A-422

TAKIGEN

[Features]
· Japan Vending Machine Industry Association standard product locks can be incorporated.
· One action locking by pushing the handle.
· Left / right dual use type (you can exchange left and right by turning over the cam. ) Standard lock uses a personal coin lock (C-288).
· Optional waterproof packing for latch hole / switch hole

2D CAD Daten verfügbar

ab^∗ ：	60.41 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration


Warenzeichen
Artikelserie
CAD
ab^∗
Minimum Lieferzeit ：
Spezifikationen


Warenzeichen	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN	TAKIGEN
Artikelserie	Edelstahl Flachgriff A-1970-A	Edelstahl Dünnen, flacher Schwenkhebel A-1464	Edelstahl Flachschwenkhebel A-1475	Flachgriff mit Druckknopf A-260-A	Kompakter Flachgriff A-250	Gebogener Flachgriff A-150	Anzugsflachgriff A-474	Flachgriff mit Notfluchtgerät, A-265	Flachgriff A-230	Flachgriff A-240-A	Flachgriff A-910	Plastikabdeckung für Modell A-464, A-464-PC	Wasserdichte Dichtung für A-464, A-464-WP	Kautschukkappe für A-481, A-481-RC	Außendichtungs-Griff A-413	Außendichtungs-Griff A-462	Außendichtungs-Griff A-463	Automatik-Verschluss Spülgriff (Zylinderverschluss-Model) A-480-A	Klappgriff mit Schutzring, A-417-F	Eingelassener Griff für Getriebe A-248	Rostfreier Edelstahl Bündige Griffleiste mit automatischer Verriegelung A-1480	Schmaler Flachschwenkhebel A-446	Edelstahl Flachgriff mit Druckknopf A-1260	Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionsfunktion, A-1481-F	Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionfunktion, A-1481-N	Edelstahl Griffmuschel für Vorhängeschloss A-1464-1-PDL	Edelstahl Dünnen, flacher Schwenkhebel A-1464-C	Stainless Steel dünner wasserdichter Flachgriff A-1494	Edelstahl Flachgriff A-1230-A	Edelstahl Flachgriff A-1240-B	Edelstahl Flachgriff A-1251	Edelstahl Flachgriff A-1600-A	Edelstahl Flachgriff A-1700	Edelstahl Flachgriff A-1900	Wasserdichter Edelstahl-Flachgriff A-1465-C	Wasserdichter Edelstahl-Flachgriff A-1485-F	Wasserdichter Edelstahl-Flachgriff A-1950-A	Messuhr-Sperre Flachgriff A-464-DL	Kunststoff-Schwenkhebel AP-483	Schwenkhebel mit Kunststoff-Staubschutzkappe AP-493	Klappgriff A-403	Klappgriff A-403-A	Klappgriff A-408	Klappgriff A-421	Klappgriff A-422
CAD	2D / 3D	2D / 3D	2D	2D / 3D	2D	2D / 3D	2D / 3D	2D	2D	2D / 3D	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D	2D	2D / 3D	2D / 3D	2D	2D	2D / 3D	2D	2D	2D / 3D	2D		2D / 3D	2D	2D	2D / 3D	3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D / 3D	2D / 3D		2D	2D / 3D	2D
ab^∗	58.36 € *Stückpreis Standardkonfiguration	93.48 € *Stückpreis Standardkonfiguration	105.94 € *Stückpreis Standardkonfiguration	30.58 € *Stückpreis Standardkonfiguration	12.85 € *Stückpreis Standardkonfiguration Mengenrabatt	16.38 € *Stückpreis Standardkonfiguration	49.76 € *Stückpreis Standardkonfiguration	16.51 € *Stückpreis Standardkonfiguration	36.40 € *Stückpreis Standardkonfiguration	21.87 € *Stückpreis Standardkonfiguration Mengenrabatt	20.78 € *Stückpreis Standardkonfiguration	6.22 € *Stückpreis Standardkonfiguration	2.88 € *Stückpreis Standardkonfiguration	9.79 € *Stückpreis Standardkonfiguration	124.88 € *Stückpreis Standardkonfiguration	96.08 € *Stückpreis Standardkonfiguration	96.76 € *Stückpreis Standardkonfiguration	49.44 € *Stückpreis Standardkonfiguration	67.96 € *Stückpreis Standardkonfiguration	35.03 € *Stückpreis Standardkonfiguration	182.60 € *Stückpreis Standardkonfiguration	13.53 € *Stückpreis Standardkonfiguration	105.94 € *Stückpreis Standardkonfiguration	115.51 € *Stückpreis Standardkonfiguration	101.14 € *Stückpreis Standardkonfiguration	115.51 € *Stückpreis Standardkonfiguration	122.22 € *Stückpreis Standardkonfiguration	101.14 € *Stückpreis Standardkonfiguration	134.68 € *Stückpreis Standardkonfiguration	105.94 € *Stückpreis Standardkonfiguration	91.55 € *Stückpreis Standardkonfiguration	47.70 € *Stückpreis Standardkonfiguration	26.07 € *Stückpreis Standardkonfiguration	91.27 € *Stückpreis Standardkonfiguration	91.95 € *Stückpreis Standardkonfiguration	101.14 € *Stückpreis Standardkonfiguration	137.67 € *Stückpreis Standardkonfiguration	96.76 € *Stückpreis Standardkonfiguration	16.60 € *Stückpreis Standardkonfiguration Mengenrabatt	22.00 € *Stückpreis Standardkonfiguration	54.03 € *Stückpreis Standardkonfiguration	107.73 € *Stückpreis Standardkonfiguration	70.70 € *Stückpreis Standardkonfiguration	100.87 € *Stückpreis Standardkonfiguration	60.41 € *Stückpreis Standardkonfiguration
Minimum Lieferzeit ：	6 Arbeitstage	6 Arbeitstage	6 Arbeitstage	Versand am selben Tag	Versand am selben Tag	Versand am selben Tag	Versand am selben Tag	Versand am selben Tag	6 Arbeitstage	Versand am selben Tag	6 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	Versand am selben Tag	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	Versand am selben Tag	6 Arbeitstage	6 Arbeitstage	6 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	6 Arbeitstage	10 Arbeitstage	Versand am selben Tag	Versand am selben Tag	6 Arbeitstage	6 Arbeitstage	6 Arbeitstage	10 Arbeitstage	6 Arbeitstage	Versand am selben Tag	10 Arbeitstage	Versand am selben Tag	10 Arbeitstage	10 Arbeitstage	10 Arbeitstage	6 Arbeitstage
Spezifikationen																																							Auf Lager