Gleitführungseinheiten（Schlittenform：Ausführung mit Führungswagen）

?* Informationen zur Lieferzeit und Preisen

• 

  Gleitlager-Führungsschienen DryLin N / Doppelschienen, Montiert / nur Schiene / wartungsfrei, trockenlaufgeeignet

  IGUS

  Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · When two rails are set up in parallel, one side uses a floating bearing.
  · Choose the optimal setting and mount method for fixed / floating bearing from horizontal, vertical, and side mounting.
  · This setting and mount method prevents the linear guide eating into other materials and getting blocked due to parallel measurement error.
  · For the floating bearing, set the amount of play with consideration for the amount of expected measurement error.
  · This provides a certain amount of play on one side.
  · The floating bearing is bi-directional during assembly.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	13 Arbeitstage

• 

  Gleitlager-Führungsschienen DryLin N / Einzelschiene, Rund / nur Schlitten / wartungsfrei, trockenlaufgeeignet

  IGUS

  Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · Simple mounting with no maintenance required.
  · This zinc diecast carriage and slide is a slide bearing for use with the DryLin R JUM model.
  · Can be operated without lubricant, so no dust gets mixed into oils.
  · Lightweight with low noise operation.
  · High moment load capacity.
  · Appropriate for use with single rail systems.
  · Excellent dust resistance.
  · Flat and wide surface area for supporting high moment loads.
  · Can be installed in a variety of spaces.
  · Operates without lubricant at a low friction coefficient.
  · Strong and friction resistant, and doesn't corrode.
  · Low noise specifications

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	14.02 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleitlager-Führungsschienen DryLin N / TK-01 / Modell / montiert / wartungsfrei, trockenlaufgeeignet

  IGUS

  A linear guide that's functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · The carriage features manual gap adjustment.
  · Maintenance is not required, and it operates without lubricant.
  · Has excellent corrosion resistance.
  · This is a rail made from anodized aluminum.
  · For standard symmetrical hole arrangement, C5 = C6.
  · Colors vary slightly due to coating thickness.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	14 Arbeitstage

• 

  Gleitschieber, Gleittisch S-Typ (STF)

  OILES

  Demonstrates excellent performance in environments with dust and contaminants.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	245.12 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleitlager-Führungsschienen DryLin N / Modell / nur Schlitten / wartungsfrei, trockenlaufgeeignet

  IGUS

  [Features]
  · A linear guide that's functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.
  · The carriage features manual gap adjustment.
  · Maintenance is not required, and it operates without lubricant.
  · Excellent corrosion resistance.
  · A rail made from anodized aluminum.
  · For standard symmetrical hole arrangement, C5 = C6

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	124.85 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleitlager-Führungsschienen DryLin N / TK-04 / Miniaturmodell / wartungsfrei, trockenlaufgeeignet

  IGUS

  A linear guide that's functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · Maintenance is not required.
  · Operates without lubricant.
  · Available three size types.
  · The carriage is made from zinc diecast with chromate treatment, the slide part is made from iglidur J-polymer, and the rail is made from hard anodized aluminum.
  · Mounting height and width are small.
  · Excellent corrosion resistance.
  · For standard symmetrical hole arrangement, C5 = C6.
  · Colors vary slightly due to coating thickness.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	13 Arbeitstage

• 

  Gleitlager-Führungsschienen DryLin N / Einzelschiene, Quadratisch / nur Schiene / wartungsfrei, trockenlaufgeeignet

  IGUS

  Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · When two rails are set up in parallel, one side uses a floating bearing.
  · Choose the optimal setting and mount method for fixed / floating bearing from horizontal, vertical, and side mounting.
  · This setting and mount method prevents the linear guide eating into other materials and getting blocked due to parallel measurement error.
  · For the floating bearing, set the amount of play with consideration for the amount of expected measurement error.
  · This provides a certain amount of play on one side.
  · The floating bearing is bi-directional during assembly.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  Minimum Lieferzeit ：	13 Arbeitstage

• 

  Gleitlager-Führungsschienen DryLin N / Einzelschiene, Quadratisch / nur Schlitten / wartungsfrei, trockenlaufgeeignet

  IGUS

  Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.
  
  [Features]
  · Simple mounting with no maintenance required.
  · This zinc diecast carriage and slide is a slide bearing for use with the DryLin R JUM model.
  · Can be operated without lubricant, so no dust gets mixed into oils.
  · Lightweight with low noise operation.
  · High moment load capacity.
  · Appropriate for use with single rail systems.
  · Excellent dust resistance.
  · Flat and wide surface area for supporting high moment loads.
  · Can be installed in a variety of spaces.
  · Operates without lubricant at a low friction coefficient.
  · Strong and friction resistant, and doesn't corrode.
  · Low noise specifications

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	12.46 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Metallschaber (MS)

  OILES

  Optional component compatible with OILES slide shifter BC/BF types and OILES guide unit BT/BK types.
  [Features]
  · This metal scraper (MS standard) attaches to a guide shaft and is used to remove weld spatter, grease, and other materials stuck to the shaft.
  · Uses a phosphor bronze coil scraper.
  · When mounting a metal scraper to the BC type, no dust seal (DS) can be embedded.

  • Mengenrabatt

  • Auf Lager

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	14.56 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  #500-Führungseinheit BT-Ausführung

  OILES

  A dedicated roundtrip movement guide unit with high durability that uses an OILES bearing in the slide part.
  [Features]
  · A guide unit with high rigidity for strength.
  · Products are available in a wide range of internal diameter and length measurements.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	136.91 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wellenaufnahme (für BC / BF-Ausführung)

  OILES

  [Features]
  · A slide shifter shaft support that serves as a roundtrip linear movement guide unit. Provides excellent resistance to abrasion, loading, and contaminants.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	51.20 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schiebetisch für BC-Ausführung

  OILES

  [Features]
  · A shift table for use with BC type slide shifters.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	82.74 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Staubdichtungen (DS)

  OILES

  Optional component compatible with OILES slide shifter BC/BF types.
  [Features]
  · When mounting a metal scraper to the BC type, no dust seal (DS) can be embedded.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	2.15 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleitschieber, Gleittisch S-Typ (STC)

  OILES

  Demonstrates excellent performance in environments with dust and contaminants.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	114.84 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleitschieber, BA-Typ (BTCA)

  OILES

  A roundtrip linear movement guide unit with excellent resistance to abrasion, loading, and contaminants.
  [Features]
  · Uses an aluminum housing. Compact and lightweight design. Can be used in any orientation such as horizontal or vertical.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	70.84 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  #500-Führungseinheit BK-Ausführung

  OILES

  A dedicated roundtrip movement guide unit with high durability that uses an OILES bearing in the slide part.
  [Features]
  · A guide unit with high rigidity for strength. Products are available in a wide range of internal diameter and length measurements. Can also be used for pilot positioning.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	155.86 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schiebetisch für BF-Ausführung

  OILES

  [Features]
  · A shift table for use with BF type slide shifters.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	107.89 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...