Fotosensoren, Fasersensoren (Gehäuse)

?* Informationen zur Lieferzeit

• 

  Intelligente Faserverstärker E3NX-FA

  OMRON

  It is an [Advanced] fiber amplifier with a difference in on-site response. Detection distance: 2 basic performances of 1.5 times, minimum detection object: about 1/10 times, have improved.
  
  [Features]
  · Detection distance: 2 basic performances of 1.5 times, minimum detection object: about 1/10 times*, have improved.
  · Easy setting [Smart tuning] with advanced light volume adjustment range of 40,000 times
  · Even with saturation of the amount of received light, it is optimized by light quantity adjustment and stable detection is achieved. Provision for high visibility [white display].
  · Difference between passing time and light receiving amount are visible[Solution viewer] and is reliable with [Change finder] where display value of high speed work can be seen

  CAD ：

  2D / 3D

  ab∗ ：	88.34 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fotoelektrische Sensoren mit eingebautem Kompaktverstärker [E3Z]

  OMRON

  [Features]
  · Photoelectric sensor standard, reliable assurance of 1 million units per year.
  · Industry's top class built-in amplifier: with detection range: Mutual interference prevention filter is available for transmission type (red light source type, detection distance 10 m) (sold separately).
  · Install mutual interference prevention function in various reflective type
  · Detection distance 30 m (response time 2ms) long distance transmission type is also available.
  · Guaranteed low-temperature operation that can be used in freezing warehouse: Enlarge the operating ambient temperature range to-40 to +55 °C (main model connector type).
  · Sensor I/O connector with high durability even in low temperature environment (PUR cable) was also made.
  · Improvement of coincidence between optical and mechanical axis: Since the deviation between the optical and the mechanical axis is kept within ±2.5° the optical axis aligns by simply fitting it to the mechanical axis (transmission type, regression reflection type).
  · Protection of sensor even if wiring mistake occurs output reverse protection function is carried (we add diode for reverse connection protection to output line).
  · Europe RoHS Directive compliance: Lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl, polybrominated difinyl ethers are eliminated.
  · In addition, we use burnable polyethylene wrapping paper.

  CAD ：

  2D / 3D

  ab∗ ：	64.41 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ultra-kleine Ausführung CMOS Lasersensor E3NC-S-Serie / Laserverstärker / Kopf

  OMRON

  Small sized CMOS laser sensor, "E3NC-S" sensor head and amplifier unit.
  
  [Features]
  · Small sized CMOS laser sensor that enables a stable detection of the workpiece without being affected by the color, material and surface of the workpiece
  · A dynamic range that is 500,000 times which ensures a stable detection as any variation in the workpiece will not affect the detection process
  · Smallest in industry (December 2012 to present).
  · The CMOS laser head allows for it to be mounted in tight spaces.
  · Since determination of the distance can be done, a stable detection is provided at a difference in level of 1.5 mm.
  · A reliable robot cable and protective structure IP67 to ensure best performance even in the adverse environment.
  · A clear "White color display" that provides high visibility has been used.
  · A stable detection is achieved through easy settings and smart tuning

  CAD ：

  2D / 3D

  ab∗ ：	91.45 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Erkennbare transparente Kunststoffflasche, Modell mit fotoelektrischen Sensoren mit integriertem Verstärker [E3Z-B]

  OMRON

  Photoelectric sensor for reliable detection of transparent objects, including thin-walled PET bottles

  CAD ：

  2D

  ab∗ ：	82.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Optoelektronische Sensoren mit Laserstrahl und getrenntem Digital-Verstärker [E3C-LDA]

  OMRON

  You can select from 3 beams, spot, line and area depending on your workpiece

  CAD ：

  2D

  ab∗ ：	141.38 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fasereinheiten [E32]

  OMRON

  Fiber unit to fulfill various needs

  CAD ：

  2D / 3D

  ab∗ ：	27.55 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Smart-Faserverstärker [E3X-HD]

  OMRON

  CAD ：

  2D / 3D

  ab∗ ：	79.86 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Optoelektronischer Sensor mit kleinem integriertem Verstärker / Entfernungseinstellungs-Modell [E3Z-LS]

  OMRON

  Work color and background suppression reflective sensor. Reflection of triangulation not affected by color.
  Even minute level detection is possible. Easy positioning using the clear spot, even with LEDs (E3Z-LS□3/LS□8 types)

  CAD ：

  2D

  ab∗ ：	89.06 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Optoelektronische Sensoren mit Laserstrahl und eingebautem Verstärker [E3Z-LT / LR / LL]

  OMRON

  small and safe laser type photoelectric sensor

  CAD ：

  2D

  ab∗ ：	171.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Genutete optoelektronische Sensoren mit integriertem Verstärker (E3Z-G]

  OMRON

  Grooved-type photo electric sensor that eliminates optical axis adjustment

  CAD ：

  2D

  ab∗ ：	80.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Nutförmiger fotoelektrischer Sensor [E3S-GS3]

  OMRON

  [Features]
  · Grooved photoelectric sensor eliminates optical axis adjustment

  • Mengenrabatt

  CAD ：

  3D

  ab∗ ：	101.09 €
  Minimum Lieferzeit ：	63 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Digitale Faserverstärkereinheiten [E3X-DA-S / MDA]

  OMRON

  Adjustment of light received by button operation

  CAD ：

  2D / 3D

  ab∗ ：	102.61 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  AC / DC-Stromquellen-kompatible, photoelektrische Sensoren [E3JM / E3JK]

  OMRON

  Terminal block type (E3JM) pursues thoroughly the ease of wiring/adjustment.
  Code pullout type (E3JK) condenses function to slim body, yet economically priced

  CAD ：

  2D / 3D

  ab∗ ：	67.24 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sensorplatte [E3S-LS3 □]

  OMRON

  Stable detection is possible without being influenced by holes and notches in the board
  
  [Features]
  · A narrow type, suitable for built-in equipment. (form E3S-LS3□).
  · Wide range type ideal for mounting boards with high back parts (type E3S-LS3 □W).
  · With a timer function, also PNP output assortment

  CAD ：

  2D / 3D

  ab∗ ：	110.95 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kompakte fotoelektrische Sensoren (E3ZM-C)

  OMRON

  Photoelectric sensor for automobile/machine tool industry
  
  [Features]
  · It is a stainless steel body excellent in oil resistance and robustness.
  · To improve visibility even 1 m ahead, we have a variety of orange spot transmissive visible beams.
  · M12 We stocked up on smart click type connector relay

  CAD ：

  2D / 3D

  ab∗ ：	114.85 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ölbeständig / optoelektronischer Entfernungseinstellungssensor (Metallkasten) (E3S-C)

  OMRON

  Excellent water/oil resistance, impact resistance and long distance detection
  
  [Features]
  · Excellent water/oil resistance, impact resistance and long distance detection excellent water and oil resistance (IP67 internal standard, oil resistance).
  · Safe even in an oil mist atmosphere.
  · Long range detection, up to 30 m (transmission type).
  · Excellent impact resistance M12 metal connector relay type available.
  · Switching method of NPN/PNP output

  • Mengenrabatt

  CAD ：

  3D

  ab∗ ：	137.82 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kompakte fotoelektrische Sensoren für Farbmarkererkennung mit integriertem Verstärker [E3ZM-V]

  OMRON

  Industry's smallest color mark sensor

  CAD ：

  2D / 3D

  ab∗ ：	141.78 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreies Edelstahlgehäuse Fotoelektrische Sensoren mit eingebautem kompakten Verstärker [E3ZM]

  OMRON

  [Features]
  · Stainless steel case ideal for food industry (SUS316L).
  · Strong resistance against detergents, disinfectants, and jet liquid flow.
  · BGS Reflective type, slit built-in transmission type are also available.

  CAD ：

  2D / 3D

  ab∗ ：	110.80 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fotoelektrische Sensoren mit eingebautem Kompaktverstärker [E3S-A]

  OMRON

  You can purchased separately
  
  [Features]
  · The operating mode selector switch is attached to the code extraction face (connector face).
  · Depending on the operation mode changeover switch, the operation mode can be switched ON when light is sent/received.
  · In the transmissive projector with self-diagnosis output, when the knob is pressed, the red brightness of LED the projected light increases, turbo switch that makes it easy to check the spot position is attached.
  · When the turbo switch is pressed, its function is turned ON, and when released, it automatically resets.
  · Spot light can be confirmed on a white paper even at a distance of 200 mm, so optical axis alignment or,

  CAD ：

  2D / 3D

  ab∗ ：	126.53 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Optoelektronischer Sensor mit Metallgehäuse / Entfernungseinstellungs-Modell [E3S-CL]

  OMRON

  Stability detection of various colors by just setting the distance
  
  [Features]
  · Stable detection regardless of color or material.
  · Black and white error is less than 2% (E3S-CL1).
  · Long range detection of 500 mm is possible (form E3S-CL2).
  · It is less susceptible to background effect: (differential less than 2%) form E3S-CL1).
  · Metal case, protective structure, oil resistant specification IP67, oil resistant specification (type E3S-CL2)

  CAD ：

  2D

  ab∗ ：	127.95 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Erkennbares, transparentes Objekt (erkennbare Kunststoffflasche) Kompaktmodell mit fotoelektrischen Sensoren [E3ZM-B]

  OMRON

  [Features]
  · Sensor to efficiently detect threat to PET bottles.
  · It is a new detection method independent of bottle shape, position, contents.
  · Function automatically compensates effects of soiling and temperature (E3ZM-BT excluded).
  · Assorted volume adjustments are available (form E3ZM-BT).
  · PET / Detects various transparent objects such as resin and glass

  CAD ：

  2D / 3D

  ab∗ ：	113.84 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fasersensoren - Vorteilspack [E3X-V]

  OMRON

  For small workpiece is detection, fiber sensor value pack

  ab∗ ：	87.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Digitale Faserverstärkereinheiten [E3X-DA-S]

  OMRON

  Equipped with exhaustive set of functions that supports the industry's highest stability detection capability as standard feature

  CAD ：

  2D / 3D

  ab∗ ：	159.66 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einfache Faserverstärkereinheiten (E3X-SD / NA)

  OMRON

  Giga-power light emitting element [GIGA RAY] mounted, and reached industry's highest level of power and accuracy
  
  [Features]
  · Simple and inexpensive fiber amplifier.
  · Introductory cost reduced to standard price of 8,800 yen
  · Adopt 1 key 1 function as it is easy to use.
  · Stable detection of low reflection specimens and large size specimens with consuming power of the class highest level (GIGARAY powered by)*E3X-NA □□excluding V series

  CAD ：

  2D / 3D

  ab∗ ：	73.41 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einfache Faserverstärkereinheiten (E3X-NA)

  OMRON

  Super easy x high performance

  CAD ：

  2D

  ab∗ ：	92.84 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Vakuumfasern-Linseneinheiten für weite Entfernung

  OMRON

  E32-T51V/E32-T54V for use when you want to detect long distances in a vacuum environment

  CAD ：

  2D

  ab∗ ：	62.69 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Langstreckenerkennung-Objektiveinheiten für Fasereinheiten

  OMRON

  Reliable detection of small objects over long distances. For M6 head coaxial reflection type fiber.

  CAD ：

  2D

  ab∗ ：	80.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lasereinheit Hochleistungs-Objektiveinheiten

  OMRON

  Ideal for detecting transmission fiber at a longer distance.

  CAD ：

  2D / 3D

  ab∗ ：	71.94 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einheiten mit Seitenansicht für Fasereinheiten

  OMRON

  By attaching only to the top view fiber, it quickly changes to side view fiber
  
  [Features]
  · Long distance detection is possible by attaching the lens unit to the threaded fiber

  CAD ：

  2D / 3D

  ab∗ ：	23.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Reflektierendes Modell Micro-Spot-Objektiveinheiten für Fasereinheiten

  OMRON

  Can be purchased separately

  CAD ：

  2D / 3D

  ab∗ ：	42.77 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eingebauter Verstärker CMOS-Lasersensor-Modell ZX0-Serie

  OMRON

  A stable detection is enabled for any workpiece.
  
  [Features]
  · The difference in level of 0.1 mm can be perfectly detected. The safe detection of any workpiece can be achieved with the simple and low priced photoelectric sensor.
  · It supports the change in color and material of the workpiece. The CMOS image sensor is installed in laser photoelectric sensor.
  · It includes 4 types of variations in detection depending on the distance without any installation constraints.
  · Compact size with built-in amplifier
  · Easy settings by using the smart tuning button. Without any malfunction in detecting the background.

  CAD ：

  2D

  ab∗ ：	306.24 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kompakte Lasersensor E3NC-L-Serie / Laserverstärker [E3NC-LA]

  OMRON

  Equipped with 2 sensor heads for short distance and long distance
  
  [Features]
  · Long distance spot variable provides stable detection at a minimum size of ø0.1 mm customized to suit the amplifier.
  · You can select from the 2 sensor heads are provided for long distance and short distance depending on the scene.
  · Stable detection is possible even at spot variable and smallest spot variation
  · A reliable robot cable is used to ensure best performance even in the adverse environment, a safe laser class 1 is used
  · A clear "White color display" that provides high visibility has been used.
  · A stable detection is achieved through easy settings and smart touch

  CAD ：

  2D / 3D

  ab∗ ：	91.38 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kompakte Lasersensor E3NC-L-Serie Sensorkopf [E3NC-LH]

  OMRON

  Equipped with 2 sensor heads for short distance and long distance
  
  [Features]
  · Long distance spot variable provides stable detection at a minimum size of ø0.1 mm customized to suit the amplifier.
  · You can select from 2 sensor heads are provided for long distance and short distance depending on the scene.
  · Stable detection is possible even during spot variable and smallest spot variation of the workpiece
  · A reliable robot cable is used to ensure best performance even in the adverse environment, a safe laser class 1 is used
  · A clear "White color display" that provides high visibility has been used.
  · A stable detection is achieved through easy settings and smart touch

  CAD ：

  2D / 3D

  ab∗ ：	131.27 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eingebauter Verstärker CMOS-Lasersensor-Modell ZX0-Serie, Verlängerungskabel

  OMRON

  Extension cord of built-in amplifier CMOS laser sensor "ZX0."

  ab∗ ：	87.77 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Fotosensor [E3FA]

  OMRON

  Easy mounting cylindrical photoelectric sensor
  

  CAD ：

  3D

  ab∗ ：	95.54 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...