Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
ab∗ : | 1.21 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 1.76 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 0.76 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 0.76 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 0.76 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 3.77 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 0.99 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
ab∗ : | 1.21 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
Hochbelastbare Federn TM für mittlere Lasten
TOKYO HATSUJYO MANUFACTURING
Spring with modified cross-sectional materials. Higher loads in small spaces compared to round-wire coil springs.
ab∗ : | 1.10 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Hochbelastbare Federn TH für hohe Lasten
TOKYO HATSUJYO MANUFACTURING
Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
ab∗ : | 1.10 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Hochbelastbare Federn TF für sehr leichte Last
TOKYO HATSUJYO MANUFACTURING
Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
ab∗ : | 1.49 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 1.05 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
A round-wire coil spring included in JIS B 5012: 1998 pressed coil springs.
ab∗ : | 0.85 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 0.66 € |
---|---|
Minimum Lieferzeit : | auf Anfrage |
*Stückpreis Standardkonfiguration
Polyacetal / Kunststofffedern, POM / PB
NIPPON CHEMICAL SCREW
This nonmagnetic spring is used for MRI equipment. No need to separate out from the plastic casing on disposal. Durability and chemical resistance varies depending on operating environment. Test in your operating environment before use.
ab∗ : | 2.78 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Polyetheretherketon / Kunststofffedern, PEEK / PB
NIPPON CHEMICAL SCREW
Used in harsh environments featuring immersion in solvents or corrosive chemicals, such as semiconductor manufacturing equipment. Durability and chemical resistance varies depending on operating environment. Test in your location before use.
ab∗ : | 8.29 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
An original standard based on the ISO10243 international standard. Praised in Europe and around the world.
ab∗ : | 2.64 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Hochbelastbare Federn TB für Schwerstlast
TOKYO HATSUJYO MANUFACTURING
Spring with a modified cross-section wire. High load is obtained in a small space compared to round wire coil springs.
ab∗ : | 1.71 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Starke Federn für große Biegung TY
TOKYO HATSUJYO MANUFACTURING
Ideal for plastic molds. The TY series achieves 50% deflection of the free length.
ab∗ : | 2.57 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Polyether-Etherketon / geschnittene Plastikfedern, PEEK / MPB
NIPPON CHEMICAL SCREW
Used in harsh environments where immersion in solvents or corrosive chemicals is performed, such as semiconductor manufacturing equipment, etc. Durability and chemical resistance varies depending on operating environment. Test in your operating environment before use.
ab∗ : | 21.25 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Polycarbonat / Kunststofffedern, PC / PB
NIPPON CHEMICAL SCREW
[Features]
• Disposable. Continuous operating temperature: 115 °C
• Flammability rating: UL94 V-2
• PC (polycarbonate) is a non-crystalline engineered plastic.
• Excellent impact resistance with a good balance of mechanical, electrical, and other properties. Being transparent and self-extinguishing as well, it finds use in a wide range of applications, from electrical and electronic to automotive and medical fields.
ab∗ : | 2.80 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Hochbelastbare Federn TL für geringe Last
TOKYO HATSUJYO MANUFACTURING
Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
ab∗ : | 1.10 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Starke Federn für große Biegung TR
TOKYO HATSUJYO MANUFACTURING
Ideal for plastic molds. The TR series achieves 50% deflection of the free length.
ab∗ : | 2.37 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Starke Federn für große Biegung TU
TOKYO HATSUJYO MANUFACTURING
Ideal as a coil spring for plastic molds. The TU series achieves 65% deflection of its free length.
ab∗ : | 1.56 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
An original standard based on the ISO10243 international standard. Praised in Europe and around the world.
ab∗ : | 2.87 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
An original standard based on the ISO10243 international standard. Praised in Europe and around the world.
ab∗ : | 2.71 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Runddrahtfeder LR (lange Größe)【2 Stk. pro Packung】
TOKYO HATSUJYO MANUFACTURING
Round-wire coil spring included in JIS B 5012: 1998 pressed coil springs.
ab∗ : | 13.16 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Formfeder (für SG-Schwerstlast)
SAMSOL
One of Korea's standout spring manufacturers. High quality, low cost, and immediate delivery.
ab∗ : | 1.53 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
An original standard based on the ISO10243 international standard. Praised in Europe and around the world.
ab∗ : | 3.41 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
Compared to a strong spring series, this product has a wide enter diameter.
ab∗ : | 2.97 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
A round-wire coil spring included in JIS B 5012: 1998 pressed coil springs.
ab∗ : | 0.79 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Runddrahtfeder MR (lange Größe)【2 Stk. pro Packung】
TOKYO HATSUJYO MANUFACTURING
Round-wire coil spring included in JIS B 5012: 1998 pressed coil springs.
ab∗ : | 13.69 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
Compared to a strong spring series, this product has a wide inner diameter.
ab∗ : | 11.14 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
Compared to a strong spring series, this product has a wide inner diameter.
ab∗ : | 10.34 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
[Internal diameter] 4, 6
[Outer diameter] 8, 10
[Custom length] 20
[Solid length] 12.5, 11.0
[Spring constant] 1.14, 0.43
ab∗ : | 5.04 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
[Internal diameter] 4, 4.5, 6, 8, 20.5
[Outer diameter] 6, 10, 12, 14.5, 25
[Custom length] 18, 20, 23, 25, 36
[Solid length] 11, 12, 12.5, 16
[Spring constant] 0.17, 0.38, 0.49, 0.52, 0.62, 3.48
ab∗ : | 18.22 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
[Internal diameter] 6, 8
[Outer diameter] 10, 12
[Custom length] 20, 50
[Solid length] 11, 12, 31
[Spring constant] 0.31, 0.39, 0.48
ab∗ : | 5.00 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Werkstoff |
Zulässige Last (konfigurierbare Bereich)(N) |
Enden, Oberflächenstatus |
Zulässige Last P2(N) |
Höhe H2 bei zulässiger Last(mm) |
Freie Höhe Hf(mm) |
Spulenaußen-Ø OD(Ø) |
Spuleninnen-Ø ID(Ø) |
Federkonstante k(N/mm) |
Warenzeichen | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | DEHN | MISUMI | MISUMI | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | MISUMI | TOKYO HATSUJYO MANUFACTURING | MISUMI | NIPPON CHEMICAL SCREW | NIPPON CHEMICAL SCREW | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | NIPPON CHEMICAL SCREW | NIPPON CHEMICAL SCREW | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | SAMSOL | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | TOKYO HATSUJYO MANUFACTURING | SUNCO | SUNCO | SUNCO |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Polyether-Etherketon / geschnittene Plastikfedern, PEEK / MPB | ||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
ab∗ | 1.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.87 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.41 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.79 € *Stückpreis Standardkonfiguration | 13.69 € *Stückpreis Standardkonfiguration | 11.14 € *Stückpreis Standardkonfiguration | 10.34 € *Stückpreis Standardkonfiguration | 5.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.00 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage | auf Anfrage | Versand am selben Tag | auf Anfrage | auf Anfrage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | auf Anfrage | Versand am selben Tag | auf Anfrage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage |
Werkstoff | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | POM | PEEK | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | PEEK | Polycarbonat | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Stahl | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | Öl-gehärteter Draht | - | - | - |
Zulässige Last (konfigurierbare Bereich)(N) | 50.01 bis 73.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 16.01 bis 30.00 / 30.01 bis 50.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 50.01 bis 73.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 16.01 bis 30.00 / 30.01 bis 50.00 / 50.01 bis 73.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 8.51 bis 16.00 / 30.01 bis 50.00 / 50.01 bis 73.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 1.51 bis 4.50 / 4.51 bis 8.50 / 8.51 bis 16.00 / 16.01 bis 30.00 | Bis zu 1,50 / 1.51 bis 4.50 / 4.51 bis 8.50 / 8.51 bis 16.00 / 16.01 bis 30.00 | 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 230.01 bis 580.00 / 580.01 oder mehr | 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | Bis zu 1,50 / 1.51 bis 4.50 | 1.51 bis 4.50 / 4.51 bis 8.50 / 8.51 bis 16.00 / 16.01 bis 30.00 | 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 73.01 bis 107.00 / 150.01 bis 230.00 / 230.01 bis 580.00 | 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 107.01 bis 150.00 / 230.01 bis 580.00 / 580.01 oder mehr | 8.51 bis 16.00 / 30.01 bis 50.00 / 50.01 bis 73.00 / 73.01 bis 107.00 / 107.01 bis 150.00 / 150.01 bis 230.00 / 230.01 bis 580.00 / 580.01 oder mehr | 230.01 bis 580.00 / 580.01 oder mehr | 230.01 bis 580.00 / 580.01 oder mehr | 580.01 oder mehr | 50.01 bis 73.00 / 73.01 bis 107.00 | 50.01 bis 73.00 / 73.01 bis 107.00 | 580.01 oder mehr | 580.01 oder mehr | - | - | - |
Enden, Oberflächenstatus | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nicht geerdet | Nicht geerdet | - | - | - | Nicht geerdet | Nicht geerdet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Zulässige Last P2(N) | 68.6 ~ 588.4 | 29.4 ~ 392.3 | 78 ~ 824 | 59 ~ 3920 | 137 ~ 1833 | 150,50 ~ 9265.3 | 78.5 ~ 1324 | 87.2 ~ 1570 | 137.3 ~ 8500 | 206 ~ 13000 | 78.5 ~ 4000 | 177 ~ 2403 | - | 98 ~ 1225 | - | - | - | 343 ~ 18000 | - | - | - | 98.1 ~ 6100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Höhe H2 bei zulässiger Last(mm) | 6 ~ 120 | 7 ~ 105 | 6 ~ 120 | 5 ~ 250 | 7.6 ~ 133 | 6.2 ~ 122 | 7.5 ~ 200 | 12 ~ 180 | - | - | - | 8 ~ 140 | - | 6.8 ~ 119 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Freie Höhe Hf(mm) | 15 ~ 300 | 20 ~ 300 | 10 ~ 200 | 10 ~ 500 | 10 ~ 175 | 25 ~ 305 | 15 ~ 400 | 20 ~ 300 | 10 ~ 350 | 10 ~ 350 | 10 ~ 500 | 10 ~ 175 | 10 ~ 100 | 10 ~ 175 | 18 ~ 50 | 18 ~ 50 | 25 ~ 305 | 10 ~ 350 | 20 ~ 300 | 5 ~ 25 | 18 ~ 50 | 10 ~ 500 | 20 ~ 300 | 15 ~ 300 | 25 ~ 305 | 25 ~ 305 | 300 | 15 ~ 300 | 25 ~ 305 | 30 ~ 500 | 15 ~ 40 | 300 | 50 ~ 300 | 50 ~ 300 | - | - | - |
Spulenaußen-Ø OD(Ø) | 10.5 ~ 43 | 11 ~ 42 | 6 ~ 25 | 6 ~ 70 | 6 ~ 25 | 10 ~ 63 | 10.5 ~ 50 | 10.5 ~ 52 | 8 ~ 70 | 8 ~ 70 | 8 ~ 70 | 6 ~ 25 | 3 ~ 25 | 6 ~ 25 | 6 ~ 25 | 3 ~ 25 | 10 ~ 63 | 8 ~ 70 | 14.5 ~ 46 | 5 ~ 12 | 8 ~ 25 | 8 ~ 70 | 14.5 ~ 46 | 10.5 ~ 43 | 10 ~ 63 | 10 ~ 63 | 3 ~ 25 | 10 ~ 50 | 10 ~ 63 | 30 ~ 60 | 6 ~ 8 | 6 ~ 8 | 41.5 ~ 71.5 | 43 ~ 73 | - | - | - |
Spuleninnen-Ø ID(Ø) | 6 ~ 31 | 7 ~ 31 | 3 ~ 12.5 | 3 ~ 38.5 | 3 ~ 12.5 | 5 ~ 38 | 6 ~ 36 | 5.5 ~ 37 | 4 ~ 38.5 | 4 ~ 38.5 | 4 ~ 38.5 | 3 ~ 12.5 | 2 ~ 17 | 3 ~ 12.5 | 4 ~ 20.5 | 2.2 ~ 20.5 | 5 ~ 38 | 4 ~ 38.5 | 9 ~ 32 | 3 ~ 10 | 4 ~ 20.5 | 4 ~ 38.5 | 9 ~ 32 | 6 ~ 31 | 5 ~ 38 | 5 ~ 38 | 2 ~ 17 | 5 ~ 25 | 5 ~ 38 | 16 ~ 35 | 3.6 ~ 5 | 3.6 ~ 5 | 23 ~ 50 | 23 ~ 47 | - | - | - |
Federkonstante k(N/mm) | 1.09 ~ 19.61 | 0.45 ~ 12.07 | 3.1 ~ 82.4 | 2 ~ 112 | 9.5 ~ 306 | 2.4 ~ 10000 | 1.7 ~ 52.96 | 2.73 ~ 65.42 | 5.32 ~ 367.48 | 10.78 ~ 736.11 | 1.91 ~ 94.07 | 14.8 ~ 481 | 1.12 ~ 76.67 | 5.1 ~ 153 | 0.09 ~ 2.4 | 0.06 ~ 3.48 | 1.5 ~ 280.7 | 20.76 ~ 1285.71 | 2.96 ~ 48.81 | 0.011 ~ 1.03 | 0.1 ~ 2.45 | 3.07 ~ 198.61 | 1.74 ~ 27.24 | 1.09 ~ 19.61 | 2.2 ~ 526.3 | 1 ~ 197.4 | - | 24.5 ~ 1262.24 | 3 ~ 842.1 | 10.59 ~ 128.89 | 6.3 ~ 26.1 | - | 11 ~ 547.5 | 19.7 ~ 423.2 | - | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.