Flache Ausführung（Seite 3）

?* Informationen zur Lieferzeit

• 

  Edelstahl Flachgriff A-1750

  TAKIGEN

  [Features]
  · With a new one-touch lock mechanism that closes the door, the problem of galling clasps has been improved. Made of stainless steel with excellent corrosion resistance.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D / 3D

  ab∗ ：	28.64 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Flacher Riegel C-1205

  TAKIGEN

  [Features]
  · With the key at 45° to the locking direction, if rotated 45° in the unlocking direction, then key can be withdrawn in the locking and unlocking state.
  · Pull the lever to retract the latch and open the door.
  · Close it with one touch.
  · Made of stainless steel, corrosion resistant

  CAD ：

  2D

  ab∗ ：	29.61 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Flacher Riegel C-1206

  TAKIGEN

  [Features]
  · Pull the lever to retract the latch and open the door.
  · Close it with one touch.
  · Made of stainless steel, corrosion resistant.
  · Padlocks can be used

  CAD ：

  2D

  ab∗ ：	30.09 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wasserdichter Edelstahl-Verschluss für Lukendeckel, C-1415

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Waterproof type (with O ring / sheet packing) with cap that has excellent dust-proof properties.
  · Can be unlocked from inside with a safety mechanism.
  · Dedicated handle (C-1415-H) used for locking and unlocking, and you can lift the hatch with the handle

  CAD ：

  2D

  ab∗ ：	81.01 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spitze, A-151-ST-1

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	2.82 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spitze, A-151-ST-2

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	2.48 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spitze, A-151-ST-3

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	2.71 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spitze, A-151-ST-4

  TAKIGEN

  CAD ：

  3D

  ab∗ ：	4.60 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spitze, A-151-ST-5

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	3.25 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schnappverriegelung Ebene Griff A-154-N-B

  TAKIGEN

  [Features]
  · Dust proof shutter lock included as standard. Rounded shape with soft design. Vibration/shock resistant snatch lock type flat handle.
  · The door can be opened and closed with one touch.
  · For installation, A-154-B is compatible

  CAD ：

  2D / 3D

  ab∗ ：	51.53 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Schalttafelverschluss AP-287

  TAKIGEN

  [Features]
  · Ideal for acrylic/glass, etc. housing with chattering prevention mechanism. Open and close with a soft touch. Internal parts are made of stainless steel with superior corrosion resistance.
  · It can be unlocked from the inside with an emergency safety mechanism

  CAD ：

  2D

  ab∗ ：	10.50 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoff eingelassener Verschluss CP-325

  TAKIGEN

  [Features]
  · Can be opened and closed with one touch, and is easy to install.
  · Body color can be selected

  CAD ：

  2D / 3D

  ab∗ ：	11.34 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff mit Verriegelung A-158-ST

  TAKIGEN

  [Features]
  · Can be opened and closed with one touch and installed easily.
  · Small latch type flat handle

  ab∗ ：	3.03 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Großer Flachgriff mit Verriegelung A-154-N

  TAKIGEN

  [Features]
  · Dust-proof mechanism with rubber packing.
  · Few projections from the door surface. Flat type mounting A-154 is supported

  CAD ：

  2D

  ab∗ ：	36.65 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Großer Flachgriff mit Verriegelung A-154-N-A

  TAKIGEN

  [Features]
  · Soft design with all round shape. A-154N has a joint bracket for rod installation.
  · Rod and latch (C-40, etc.) combination can enable three-way tightening with one touch.
  · With three-way tightening, even big doors can be tightly closed

  CAD ：

  2D / 3D

  ab∗ ：	58.39 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff mit Verriegelung A-151R-F

  TAKIGEN

  [Features]
  · To improve security the lock has a new reversible key with dust proof shutter with excellent operability TAK60 as standard equipment.
  · The door can be opened and closed with one touch.
  · Dust-proof and drip-proof structure

  CAD ：

  2D

  ab∗ ：	36.82 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff mit Verriegelung A-542

  TAKIGEN

  [Features]
  · One-touch opening and closing panel with new design with good operability. Thin handle of 26 mm on the lower part.
  · A-542-3 can be unlocked from inside with 3 safety mechanisms.
  · The knob can be removed.
  · A-542-3 3-point tightening (with key) A-542-4 waterproof type with 1-point tightening (without key).
  · For right or left opening (this figure/photo shows right opening)

  CAD ：

  2D

  ab∗ ：	28.64 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff mit Verriegelung A-884

  TAKIGEN

  [Features]
  · The handle can be operated from inside and outside of the door.
  · 1-point tightening (latch type), 2-point tightening, 3-point tightening, and outer / inner handle can be chosen

  CAD ：

  2D

  ab∗ ：	26.35 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffverschluss Modell Flachgriff AP-151R-A

  TAKIGEN

  [Features]
  · Can be opened and closed with one touch, with round shaped, soft design.
  · Dimensionally compatible with the A-151 series, with dust-proof and drip proof structure.
  · To improve dust proof properties, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  3D

  ab∗ ：	25.95 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoffverschluss Modell Flachgriff AP-252

  TAKIGEN

  [Features]
  · Vibration resistant latch and striker.
  · Flat type with few protrusions on the door surface.
  · Small and lightweight type

  CAD ：

  2D / 3D

  ab∗ ：	17.93 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Drehverriegelung CP-361

  TAKIGEN

  [Features]
  · Latch lock with simple structure where the latch and lever are integrated.
  · Lightweight, made of resin.
  · Matches plastic housing. ·
  · Doors can be opened and closed with one touch

  CAD ：

  2D / 3D

  ab∗ ：	6.45 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Verriegelungsgriff A-123

  TAKIGEN

  [Features]
  · Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-123-TAK60).
  · One touch lock that locks just by closing the door.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  3D

  ab∗ ：	18.34 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eingelassener Griff für Schiebetüren, A-878-2

  TAKIGEN

  [Features]
  · Small handle for sliding door.
  · Sickle lock type and rod operation type are available.
  · Since it is a flat type with few protrusions, it can also be used for double sliding doors.
  · Since it is surface mounted, there is no restriction on thickness.
  · Lock has small reversible key.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D

  ab∗ ：	64.85 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff für Schiebetüren A-154-N-C

  TAKIGEN

  [Features]
  · Soft design with rounded shape. Easy to open and close with one action, dust-proof with rubber packing.
  · Flat type with few protrusions on the door surface.
  · For installation A-154-C is compatible.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D / 3D

  ab∗ ：	48.09 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachriegel Verschluss mit Schlüssel C-312

  TAKIGEN

  [Features]
  · The 3 mm protrusion of the door surface is inconspicuous.
  · One-touch lock system locks the door just by closing it

  CAD ：

  2D / 3D

  ab∗ ：	13.49 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verarbeiteter Handgriff für große Schiebetür A-878

  TAKIGEN

  [Features]
  · Handle for sliding door.
  · Sickle lock type and rod operation type are available.
  · Since it is a flat type with few protrusions, it can also be used for double sliding doors.
  · The door can be opened and closed with one touch.
  · Lock has small reversible key.
  · For right or left opening

  CAD ：

  2D

  ab∗ ：	100.00 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flacher Griffhebel mit Schloss, A-151R-B

  TAKIGEN

  [Features]
  · Snatch-lock type flat handle that is resistant to vibration and impact, etc.
  · Rounded soft design.
  · One touch open/close.
  · Dust-proof and drip-proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D

  ab∗ ：	42.37 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Flachschnappverschlussgriff, AP-151R-B

  TAKIGEN

  [Features]
  · Snatch-lock type flat handle that is resistant to vibration and impact, etc.
  · Rounded soft design.
  · One touch open/close.
  · Dust-proof and drip-proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D / 3D

  ab∗ ：	32.24 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachriegel C-866

  TAKIGEN

  [Features]
  · Pull the lever to retract the latch and open the door.
  · If the latch is not fully extended, it notifies you that the lever is lifted up and in a semi-locked condition (using semi-lock warning function). Passed 350,000 repetitions of a continuous durability test for latch tip strength 980N· Lever - Pulling strength 245N

  CAD ：

  2D / 3D

  ab∗ ：	9.58 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Flachverschluss CP-875

  TAKIGEN

  [Features]
  · Lightweight and ideal for small doors.
  · Doors can be opened and closed with one touch

  CAD ：

  2D / 3D

  ab∗ ：	19.21 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Doppelriegel C-1120

  TAKIGEN

  [Features]
  · Unlike general latch devices, rotating the handle causes latching, and even if you exceed beyond a certain point (dead point), it will certainly not come off even if pulled

  CAD ：

  2D

  ab∗ ：	31.76 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Schiebeverschluss C-1175C

  TAKIGEN

  CAD ：

  2D

  ab∗ ：	27.80 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Schlossfalle C-1625-3

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	26.18 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Schlossfalle für Stange C-1040

  TAKIGEN

  [Features]
  · Door can be closed with one touch

  CAD ：

  2D / 3D

  ab∗ ：	30.75 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Quadratisches Edelstahl-Druckknopf-Verschluss C-1079

  TAKIGEN

  [Features]
  · Lock by rotating the pushbutton on the locking device by 90°

  CAD ：

  2D / 3D

  ab∗ ：	29.61 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl eingebetteter Handgriff FA-1944

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance.
  · Made of stainless steel, corrosion resistant.
  · You can open and close the door by one-touch operation of the handle.
  · Ideal for medium and small doors.
  · Lock has a reversible key and a dust-proof shutter.
  · For both left hand and right hand use

  CAD ：

  2D

  ab∗ ：	150.83 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dual Lock C-120

  TAKIGEN

  [Features]
  · Unlike general latch devices, rotating the handle causes latching, and even if you exceed beyond a certain point (dead point), it will certainly not come off even if pulled

  CAD ：

  2D / 3D

  ab∗ ：	10.01 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Türriegel C-852

  TAKIGEN

  [Features]
  · Solid structure made in USA.
  · It is possible to open the door from the inside with a lever.
  · For right and left use

  CAD ：

  2D / 3D

  ab∗ ：	39.91 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Push-Modell Verschluss quadratisch, C-881

  TAKIGEN

  [Features]
  · Drawers, etc. can be fixed in closed or pulled out state

  CAD ：

  2D

  ab∗ ：	35.24 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kontrollzentrum mit Riegel C-870

  TAKIGEN

  [Features]
  · Latch is attached to the control center, and the latch and lever operate with 60° rotation left and right (C-870-2 is 45°)

  CAD ：

  2D / 3D

  ab∗ ：	18.64 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Toilettenschloß C-874

  TAKIGEN

  [Features]
  · This product is developed for in-vehicle toilets.
  · Indicator for in-room display on the surface.
  · On the inside there is an easy to operate knurled knob that can be locked in three directions

  CAD ：

  2D

  ab∗ ：	53.55 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffverschluss für Drähte, CP-626

  TAKIGEN

  [Features]
  · Lightweight and soft type resin latch.
  · The latch stroke is not transmitted to the wire while closing the door.
  · You can easily change the orientation of the latch

  CAD ：

  2D / 3D

  ab∗ ：	5.36 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Befestigung Paneel C-420

  TAKIGEN

  [Features]
  · CP-420 made of zinc alloy (installation method is different). The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  · Multiple fasteners can be used simultaneously

  CAD ：

  3D

  ab∗ ：	5.69 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff One-Touch-Schalttafelbefestigung CP-420

  TAKIGEN

  The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  Multiple fasteners can be used simultaneously. Quick-in type that only needs to be plugged to install and requires little effort.
  1 size suitable for (0.8) 1.2, 1.6, 2.0 mm.

  CAD ：

  2D / 3D

  ab∗ ：	2.55 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff One-Touch-Schalttafelbefestigung CP-420-MD

  TAKIGEN

  [Features]
  · The interior door of a distribution board, etc., fixed with conventional screws and knurled knob can be opened and closed with one touch to save labor.
  · Quick-in type that only needs to be plugged in to install.
  · Reduces labor.
  · Easy locking and unlocking with a flathead screwdriver (JISC8480 compliant).
  · Attached indicator makes confirmation of locking easy.
  · Lever can be fixed with a sealing wire.
  · Flame retardant materials (UL94V-2) used

  CAD ：

  3D

  ab∗ ：	2.72 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...