Flache Ausführung（Seite 2）

?* Informationen zur Lieferzeit

• 

  Flachgriff mit Verriegelung A-510

  TAKIGEN

  [Features]
  · With three way tightening, even big doors can be tightly closed.
  · Luxurious design. Rubber packing creates a dust-proof mechanism with one-touch opening and closing that can be used for right and left side

  CAD ：

  2D / 3D

  ab∗ ：	57.51 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff mit Verriegelung A-540

  TAKIGEN

  [Features]
  · One touch open and close A-540-1· With 3-way tightening, even big doors can be tightly closed.
  · A-540-1/3 Can be unlocked from inside with a safety mechanism.
  · Rust resistant satellite chrome plating (25 micron) A-540-1/3 is dust proof.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  3D

  ab∗ ：	46.87 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffverschluss Modell Flachgriff AP-151R-A

  TAKIGEN

  [Features]
  · Can be opened and closed with one touch, with round shaped, soft design.
  · Dimensionally compatible with the A-151 series, with dust-proof and drip proof structure.
  · To improve dust proof properties, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  3D

  ab∗ ：	24.14 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Drehverriegelung CP-361

  TAKIGEN

  [Features]
  · Latch lock with simple structure where the latch and lever are integrated.
  · Lightweight, made of resin.
  · Matches plastic housing. ·
  · Doors can be opened and closed with one touch

  CAD ：

  2D / 3D

  ab∗ ：	6.00 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eingelassener Griff für Schiebetüren, A-878-2

  TAKIGEN

  [Features]
  · Small handle for sliding door.
  · Sickle lock type and rod operation type are available.
  · Since it is a flat type with few protrusions, it can also be used for double sliding doors.
  · Since it is surface mounted, there is no restriction on thickness.
  · Lock has small reversible key.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D

  ab∗ ：	60.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachgriff für Schiebetüren A-154-N-C

  TAKIGEN

  [Features]
  · Soft design with rounded shape. Easy to open and close with one action, dust-proof with rubber packing.
  · Flat type with few protrusions on the door surface.
  · For installation A-154-C is compatible.
  · For left hand or right hand use (the drawings and photo show right hand use)

  CAD ：

  2D / 3D

  ab∗ ：	44.90 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff Schnappverschlussgriff für dicke Türen, AP-151RK-B

  TAKIGEN

  [Features]
  · Can be attached to a thick door with a thickness of 8.5 to 10 mm.
  · Snatch lock type flat handle that is resistant to vibration and impact.
  · One-touch open/close with soft operation.
  · Durable resin

  CAD ：

  2D

  ab∗ ：	33.03 €
  Minimum Lieferzeit ：	19 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flacher Griffhebel mit Schloss, A-151R-B

  TAKIGEN

  [Features]
  · Snatch-lock type flat handle that is resistant to vibration and impact, etc.
  · Rounded soft design.
  · One touch open/close.
  · Dust-proof and drip-proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D

  ab∗ ：	39.41 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Flachschnappverschlussgriff, AP-151R-B

  TAKIGEN

  [Features]
  · Snatch-lock type flat handle that is resistant to vibration and impact, etc.
  · Rounded soft design.
  · One touch open/close.
  · Dust-proof and drip-proof structure.
  · To improve dust-proofing, a shutter is attached to the front of the key (standard equipment)

  CAD ：

  2D / 3D

  ab∗ ：	29.99 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Drahtloser Karabinerverschluß, C-10

  TAKIGEN

  Pull the lever to retract the latch and open the door. Close it with one touch.
  It is thin and can be directly attached to the panel surface.

  CAD ：

  2D / 3D

  ab∗ ：	3.59 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Schlossfalle C-1625-3

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	24.35 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Schlossfalle für Stange C-1625-5

  TAKIGEN

  [Features]
  · Turn the arm counterclockwise to release the latch and change the orientation of the latch.
  · The length of the latch can be adjusted (10 to 20 mm). The joint of the rod can be attached by one touch with the linkage bush

  CAD ：

  2D / 3D

  ab∗ ：	28.00 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Quadratisches Edelstahl-Druckknopf-Verschluss C-1079

  TAKIGEN

  [Features]
  · Lock by rotating the pushbutton on the locking device by 90°

  CAD ：

  2D / 3D

  ab∗ ：	27.54 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl eingebetteter Handgriff FA-1944

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance.
  · Made of stainless steel, corrosion resistant.
  · You can open and close the door by one-touch operation of the handle.
  · Ideal for medium and small doors.
  · Lock has a reversible key and a dust-proof shutter.
  · For both left hand and right hand use

  CAD ：

  2D

  ab∗ ：	140.31 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dual Lock C-120

  TAKIGEN

  [Features]
  · Unlike general latch devices, rotating the handle causes latching, and even if you exceed beyond a certain point (dead point), it will certainly not come off even if pulled

  CAD ：

  2D / 3D

  ab∗ ：	9.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Türriegel C-852

  TAKIGEN

  [Features]
  · Solid structure made in USA.
  · It is possible to open the door from the inside with a lever.
  · For right and left use

  CAD ：

  2D / 3D

  ab∗ ：	37.13 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Drucktastenverschluss C-216

  TAKIGEN

  [Features]
  · Pulling (pushing) the button moves the latch by 7 mm

  CAD ：

  2D / 3D

  ab∗ ：	6.89 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spannverschluss C-625-1

  TAKIGEN

  [Features]
  · Door can be closed with one touch.
  · The latch is made of iron to be robust.
  · Solid structure made in USA

  CAD ：

  2D

  ab∗ ：	16.28 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Spannverschluss C-625-2

  TAKIGEN

  [Features]
  · Door can be closed with one touch.
  · The latch is made of iron to be robust.
  · Solid structure made in USA

  CAD ：

  2D

  ab∗ ：	19.03 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kontrollzentrum mit Riegel C-870

  TAKIGEN

  [Features]
  · Latch is attached to the control center, and the latch and lever operate with 60° rotation left and right (C-870-2 is 45°)

  CAD ：

  2D / 3D

  ab∗ ：	17.34 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Quadratisches Türschloss C-859

  TAKIGEN

  [Features]
  · Clasp is sturdy cast iron.
  · Hold at 90° by detent method.
  · Superior vibration resistance.
  · Left and right combination

  CAD ：

  2D

  ab∗ ：	12.11 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Vierkantiger Riegel C-168

  TAKIGEN

  [Features]
  · 10 mm latch will operate with 50° rotation left and right.
  · Ideal for one-touch doors

  CAD ：

  2D / 3D

  ab∗ ：	7.65 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verriegelungsvorrichtung C-250

  TAKIGEN

  [Features]
  · Door can be closed with one touch

  CAD ：

  2D

  ab∗ ：	54.73 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-816

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body without disfiguring the appearance of the door.
  · The handle lock part uses the snatch lock method, and the door can be opened and closed with one touch.
  · The red indicator will appear unless the handle is securely locked.
  · Door closing operation can be visually confirmed and is safe

  CAD ：

  2D / 3D

  ab∗ ：	82.87 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff für Luftdichtheit FA-818

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it will renew the image of the van body.
  · Emergency escape is possible if a safety push rod is installed in the cabinet.
  · Lock has a reversible key and a dust-proof shutter.
  · Left and right combination

  CAD ：

  2D

  ab∗ ：	100.78 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zugschließe 250

  BEST

  [Uses] For different direction single sliding doors

  ab∗ ：	249.26 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hervorstehendes Schiebetürschloss (Drehknauf an beiden Seiten) 277S

  BEST

  ab∗ ：	40.73 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verriegelungen mit Griffschale

  GANTER GRIFF

  Verriegelungen mit Griffschale GN 115.10 werden eingesetzt, wenn der Anwendungsfall, neben der Verriegelungsmechanik, ein Bedienelement erfordert und dieses nicht vorstehen soll.
  Eine auf 90° begrenzte Drehbewegung bringt den Riegel hinter der Zarge zu liegen, wobei die Anlaufschrägen am Riegel das Schließen der Tür erleichtern.
  Durch 22 verschieden gekröpfte Riegel lässt sich ein Bereich A von 4 bis 50 mm abdecken.
  Verriegelungen GN 115.10 werden mit lose beigelegtem Riegel geliefert.

  CAD ：

  2D / 3D

  ab∗ ：	23.80 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Neo-Verriegelung VA

  WAKISANGYO

  To lock a wooden door from inside

  ab∗ ：	11.96 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Innengriff AP-866

  TAKIGEN

  [Features]
  · Flat plastic handle with few projections.
  · Integrated structure of inner handle and inner lock.
  · Can be installed with 1 screw

  CAD ：

  2D / 3D

  ab∗ ：	10.99 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ovaler Griff AP-867

  TAKIGEN

  [Features]
  · Due to its round design it has a soft appearance.
  Waterproof structure that can be used with any door.
  · Lock has a reversible key and a dust-proof shutter.
  · Left and right combination

  CAD ：

  2D / 3D

  ab∗ ：	32.55 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Außengriff für Kabinen A-885

  TAKIGEN

  [Features]
  · Flat type with few projections from the door surface.
  · Remote operation of locking device is possible using rod or wire.
  · For right / left use.
  · A-885-1-1 is only for left side (-L)

  CAD ：

  2D / 3D

  ab∗ ：	25.09 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Doppelter Verriegelungsgriff A-866-1L

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle and outer handle are connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  ab∗ ：	28.92 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Doppelter Verriegelungsgriff A-887

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle is connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  ab∗ ：	93.02 €
  Minimum Lieferzeit ：	26 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff A-873

  TAKIGEN

  [Features]
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  ab∗ ：	57.03 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff eingelassener Griff AP-874

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Round, flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  ab∗ ：	28.29 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff eingelassener Griff AP-883

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  ab∗ ：	35.74 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff, Kontrollzentrum A-873-1C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions

  CAD ：

  2D / 3D

  ab∗ ：	77.52 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff, Kontrollzentrum A-873-2C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status

  CAD ：

  2D / 3D

  ab∗ ：	92.48 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff, Kontrollzentrum A-873-2C-G

  TAKIGEN

  [Features]
  · A-873-2C reverse link type.
  · Remote operation of locking device is possible using rod or wire.
  · The control center of the conventional product is equipped with an internal locking / unlocking mechanism.
  · With a dust proof shutter reversible key, the built-in click mechanism gives a feeling of reliable operation.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status.
  · Key operation is the same as in a passenger car, with one place where the key can be removed

  CAD ：

  2D

  ab∗ ：	92.16 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Großer Flachgriff mit Verriegelung A-530

  TAKIGEN

  [Features]
  · Two point tightening closes big doors tightly.
  · One-touch opening and closing.
  · Can be installed without caulking the rod (A-530-2).
  · For right and left use (A-530-1)

  CAD ：

  2D / 3D

  ab∗ ：	24.35 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hebegriff A-868

  TAKIGEN

  [Features]
  · This handle adapts to every door; lift doors, sliding doors, opening doors, etc.
  · Large and easy to operate.
  · Remote operation of locking device is possible using rod.
  · Lock has a reversible key and a dust-proof shutter.
  · For left hand or right hand use

  CAD ：

  2D / 3D

  ab∗ ：	55.97 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Eingelassener Griff für Schiebetüren, A-898

  TAKIGEN

  [Features]
  · Handle for sliding door.
  · Thinner than conventional product (A-878-1).
  · Handle shape that is easy to hook with your fingers.
  · Can adjust rod length.
  · Lock has small reversible key.
  · For right opening, for left opening

  CAD ：

  2D / 3D

  ab∗ ：	53.94 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Harz Handgriff für Schiebetüren, AP-889

  TAKIGEN

  [Features]
  · Soft to the touch.
  · There is a finger hook for closing the door, with smooth operation.
  · Ideal for small sliding doors.
  · For both left hand and right hand use

  CAD ：

  2D

  ab∗ ：	19.77 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Runder Flachgriff A-55

  TAKIGEN

  [Features]
  · Left/right dual use type (If the stopper is turned inside out, right and left can be interchanged)

  CAD ：

  2D / 3D

  ab∗ ：	10.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...