• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

DIN-Schienen / Spezialwerkzeuge

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 7 Tage oder weniger
  • 8 Tage oder weniger
  • 11 Tage oder weniger
  • 17 Tage oder weniger
  • 23 Tage oder weniger
  • DIN Rail (Aluminum Model) Mounting Holes, 4.5 x 25 Long Hole

    DIN Rail (Aluminum Model) Mounting Holes, 4.5 x 25 Long Hole

    MISUMI

    Standard aluminum DIN rail

    • Mengenrabatt
    ab
    3.13€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Aluminum Model) Mounting Holes, 5.5 x 8 Long Hole

    DIN Rail (Aluminum Model) Mounting Holes, 5.5 x 8 Long Hole

    MISUMI

    Mounting surface enhanced aluminum DIN rail

    • Mengenrabatt
    ab
    3.21€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail Mounting Plate

    DIN Rail Mounting Plate

    MISUMI

    General purpose resin plate for DIN rail

    • Mengenrabatt
    CAD
    2D
    ab
    5.20€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Mounting Bracket for DIN Rail Space-Saving Terminal Block

    Mounting Bracket for DIN Rail Space-Saving Terminal Block [1-10 Stk. pro Packung]

    MISUMI

    Support bracket with an inclination of 25 degrees with excellent workability

    • Mengenrabatt
    CAD
    2D
    ab
    2.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For DIN Rail AC Base

    For DIN Rail AC Base [1-5 Stk. pro Packung]

    MISUMI

    A base that allows for mounting AC outlets atop DIN rails

    • Mengenrabatt
    • Separate Charge
    CAD
    2D
    ab
    4.61€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For DIN Rail NF Base

    For DIN Rail NF Base [1-5 Stk. pro Packung]

    MISUMI

    The attachment to DIN rail is done easily and securely with 1 screw

    • Mengenrabatt
    • Separate Charge
    CAD
    2D
    ab
    4.79€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN35mm Rail (DAV)

    DIN35mm Rail (DAV) [1-100 Stk. pro Packung]

    TOYO GIKEN

    This is a 35-mm wide rail that supports the DIN standard. The DAV type is an aluminum rail capable of mounting 35-mm wide equipment. [Features] • Rails conforming to the PTU, PT-SS, PT, FP, FPW, CTW, PUW, VTF, VTH, VT-5KD, VTC, VT series are 35-mm width compatible with the DIN standard. • Equipment compatible with the various DIN rail types (35-mm width) can be mounted.

    • Mengenrabatt
    ab
    6.72€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Aluminum Model) Mounting Holes, 4.5 x 25 Long Hole

    DIN Rail (Aluminum Model) Mounting Holes, 4.5 x 25 Long Hole

    MISUMI

    Clean finish for cutting surfaces with no burrs

    • Mengenrabatt
    ab
    3.66€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Steel Conductive Model)

    DIN Rail (Steel Conductive Model)

    MISUMI

    A conductive model of DIN rail is also available

    • Mengenrabatt
    ab
    5.19€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN 35 mm Rail (DAS)

    DIN 35 mm Rail (DAS) [1-100 Stk. pro Packung]

    TOYO GIKEN

    A 35 mm width rail compliant with the DIN standard. The DAS type can be used with our C-type 20 mm terminal block, as well as with 35 mm-width equipment.

    • Mengenrabatt
    ab
    6.89€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Aluminum Model) Mounting Holes, 5.2 x 10 Long Hole

    DIN Rail (Aluminum Model) Mounting Holes, 5.2 x 10 Long Hole

    MISUMI

    Clean finish for cutting surfaces with no burrs

    • Mengenrabatt
    ab
    4.49€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rail, IEC Compatible

    Rail, IEC Compatible [1-50 Stk. pro Packung]

    KASUGA ELECTRIC

    Rail conforming to IEC standards. Convenient for mounting equipment such as terminal blocks, etc. [Features] · Four rail types are available: IEC 15-/35-mm width, C-type, and IEC/C combined type. · The IEC 35-mm wide rail is available in aluminum and steel.

    • Mengenrabatt
    ab
    4.66€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Base rail (DIN Standard Rail)

    Base rail (DIN Standard Rail) [1-100 Stk. pro Packung]

    KOWA KASEI

    DIN standard aluminum rail. * Cutting tools are also available. [(1) KC-1S (For KBR-T and KBR-K) (2) KC-2S (For KBR-W and KBR-M) (3) KC-3S (For KBR-H)]

    • Mengenrabatt
    CAD
    2D
    ab
    4.03€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Standard Type)

    DIN Rail (Standard Type) [50-100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    DIN-Standard 35mm-width aluminum rail [Features] ▪ Compliant with JIS-C-2812 standards. · A terminal block, socket, electrical device, etc. can be mounted at any position provided it supports DIN 35 mm width mounting. · Easy removal

    CAD
    2D
    ab
    236.12€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For DIN Rail Mini Mounting Bracket

    For DIN Rail Mini Mounting Bracket [10 Stk. pro Packung]

    MISUMI

    Supports 3 levels of height adjustment in one size

    • Mengenrabatt
    CAD
    2D
    ab
    33.49€
    Minimum Lieferzeit
    7 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AC Base for DIN Rail

    AC Base for DIN Rail

    KAMEDA DENKI

    Base used for mounting AC outlets onto DIN rails. [Features] · A base for mounting AC outlets onto 35-mm DIN rails. · RoHS compliant product (3C). · Compatible outlets: WK3001 (single-open), WK3004 (dual-open). · Can be used for single/dual-port outlets. · *Outlets sold separately. · After mounting an outlet, the left-right position can be adjusted by rotating the set screws. (need to remove the cover for dual-open outlets) · A cable insertion hole is provided. Cutting a notch in the outlet is not required.

    • Mengenrabatt
    CAD
    2D
    ab
    4.62€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SPCM Model Accessory, Only DIN Rail

    SPCM Model Accessory, Only DIN Rail

    MISUMI

    Allows for the installation of terminal blocks and electronic devices

    • Mengenrabatt
    ab
    3.66€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • C-Type 20 mm Rail (AS)

    C-Type 20 mm Rail (AS) [1-100 Stk. pro Packung]

    TOYO GIKEN

    This 20 mm mounting width aluminum rail, which is compatible with the AT and ATJ series, is a TOGI original product. [Features] This 20 mm mounting width aluminum rail is compatible with the AT and ATJ series. - Two types (AS and DAS type) are available, and these can be selected depending on the application. - For example, if the width dimension needs to be reduced, an AS type should be selected, and - If it needs to be used with equipment that supports various types of DIN rails (35 mm width), a DAS type should be selected.

    • Mengenrabatt
    ab
    6.24€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Aluminum Conducting DIN Rail

    Aluminum Conducting DIN Rail

    MISUMI

    Introducing an aluminum DIN rail that can prevent grounding

    • Mengenrabatt
    ab
    6.80€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rail support bracket

    Rail support bracket [20-50 Stk. pro Packung]

    TOYO GIKEN

    [Features] ・An adjustable tilt angle and lock mechanism are added to this mobile rail support tool. ・Tilt angle: when free (-40°, 0°, +40°) , when locked (-25°, 0°, +25°).

    • Mengenrabatt
    ab
    51.99€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free rail, enhanced and multifunction type, 15 mm height

    Free rail, enhanced and multifunction type, 15 mm height

    KAMEDA DENKI

    Center nuts are used in this 15 mm, enhanced, multifunction DIN rail for compatibility with large parts. [Features] · Component can be attached to the rail center by inserting a free nut* on the inside. *Use the NS square nut for DA-301 and 302. N2 and N0 types can also be used. · Parts which are not DIN rail-compatible can be mounted on this rail. · DIN rail type of terminal block and the compact terminal block (Higashizawa RT series, Kasuga TR series) can be mounted on the same rail. · By using the AC or NF base, all types of components can be mounted. · Strong torsion resistance due to the unique form which does not shake even when used in long lengths. · Heavy-duty parts can also be mounted stably. · A simple design where the mounting hole pitch of 25 mm fits the duct hole pitch of 50 mm.

    • Mengenrabatt
    ab
    7.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Free rail (elliptical hole)

    Free rail (elliptical hole)

    KAMEDA DENKI

    A DIN standard-compliant 35 mm-width rail. (elliptical hole) [Features] - Made of aluminum for light weight, ease of handling, and a nice finish. - Cutting is easy; no need to perform anti-rust treatment on the cut ends. - Any part compatible with JIS and DIN-standard rails can be mounted, regardless of manufacturer. - Parts and terminal blocks can be freely installed on and removed from any position on the rail, letting it accommodate design changes and added circuits. - Non-DIN rail compatible parts can be mounted with an NF base or other attaching bracket.

    • Mengenrabatt
    CAD
    2D
    ab
    4.02€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (15 mm in height)

    DIN Rail (15 mm in height) [25-50 Stk. pro Packung]

    SHINOHARA ELECTRIC

    DIN Standard, 35 mm Width, Aluminum Rail, Thick Type (ADM) [Features] · Compliant with JISC2812 standard. · Features a height of 15 mm, making it suitable for mounting of large equipment. Can also be used in conjunction with a rail of height 7.5 mm to easily add a gap to the mount.

    CAD
    2D
    ab
    178.93€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • DIN Rail (Thick Type)

    DIN Rail (Thick Type) [50-100 Stk. pro Packung]

    SHINOHARA ELECTRIC

    DIN Standard, 35 mm Width, Aluminum Rail, Thick Type [Features] · Compliant with JIS-C-2812 standard. · The terminal block, socket, or electrical device can be mounted at any position as long as it is a DIN 35 mm width mounted device. · Additionally, removal can be performed easily.

    CAD
    2D
    ab
    244.45€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 16-mm Rail (IAS), C Type

    16-mm Rail (IAS), C Type [50-100 Stk. pro Packung]

    TOYO GIKEN

    - The RT/RTW compatible rails are an original product manufactured by TOYOGIKEN CO., LTD. Mounting width:16 mm. [Features] - The RT/RTW compatible rails are an original product manufactured by TOYOGIKEN CO., LTD. Mounting width:16 mm. - Two types (IAS and DIS) available depending on the application. - Go with IAS to keep widths low, or use DIS if you'll use equipment compatible with DIN rails (35 mm width).

    • Mengenrabatt
    ab
    367.25€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • 16-mm Rail (DIS), C Type

    16-mm Rail (DIS), C Type [50-100 Stk. pro Packung]

    TOYO GIKEN

    Rail compatible with RT and RTW series. The DIS-type mounting width is 16 mm and can be used together with DIN 35 mm width corresponding devices. [Features] · The RT and RTW compatible rail is an aluminum rail with a mounting width of 16 mm manufactured by Toyogiken Co., Ltd. · Two types are available – IAS type and DIS type – and can be selected depending on the application. · For example, when controlling the width dimension, the IAS type is appropriate; when wanting to use various DIN rail (35 mm width) corresponding devices together, the DIS type is more suitable.

    • Mengenrabatt
    ab
    426.67€
    Minimum Lieferzeit
    6 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jaw Duct Clamper

    Jaw Duct Clamper

    E-T-A COMPONENTS

    Clamper for the JD-B100 series.

    ab
    5.03€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jaw Duct Hinged Aluminum DIN Rail

    Jaw Duct Hinged Aluminum DIN Rail

    E-T-A COMPONENTS

    This hinged aluminum DIN rail contributes to reducing cable usage.

    ab
    27.63€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Jaw Duct Hinged Base

    Jaw Duct Hinged Base

    E-T-A COMPONENTS

    Hinged base for JD-DR1000.

    ab
    18.64€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Terminal Block Mounting Bracket "Mini Bracket"

    Terminal Block Mounting Bracket "Mini Bracket" [10 Stk. pro Packung]

    KAMEDA DENKI

    [Features] - Lets you mount terminal blocks in a sloped position for easy wiring. [Use] - An auxiliary bracket for mounting a terminal block.

    ab
    6.47€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen