ASAHI SEIKO Gehäuselager / Kugellager mit Gehäuse
Suche durch Präzisierung der Kategorie der unteren Klasse
Eingeschränkte Suche durch Präzisierung Ausführung
-
-
Lagersitz -
Lagereinheit mit Rahmen -
Sonstige
?* Informationen zur Lieferzeit und Preisen
-
Stehlagereinheit, Feststellschraube mit zylindrischem Loch UCP-Modell
ASAHI SEIKO
Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.- Mengenrabatt
- Auf Lager
ab∗ ： 13.46 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stehlagereinheit Serie Silber, Modell Feststellschraube und zylindrischem Loch KP-Modell
ASAHI SEIKO
[Features]
· Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.
· The fixation method for the bearing box and shaft is the set screw method.- Mengenrabatt
ab∗ ： 14.41 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmige Flansch-Einheit Silber Serie Zylinderloch-Modell mit Exzenterrad UFL-Modell
ASAHI SEIKO
[Features]
· Smaller and more lightweight than conventional insert bearing units.
Also, the bearing box is marked with a center mark for easy positioning.- Mengenrabatt
ab∗ ： 14.45 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmige Flansch-Einheit Silber Serie Zylinderloch-Modell mit Exzenterrad MUFL-Modell
ASAHI SEIKO
[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.- Mengenrabatt
- Auf Lager
ab∗ ： 38.96 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Aufwickeleinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCT
ASAHI SEIKO
Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.ab∗ ： 22.53 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmige Flansch-Modell-Einheit Aluminium-Serie Zylinderloch-Modell mit Feststellschraube KFL-Modell
ASAHI SEIKO
[Features]
· The bearing box is a diamond flange shape and can be mounted with two bolts, so it is optimal for space saving.- Mengenrabatt
- Auf Lager
ab∗ ： 13.95 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stehlagereinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCPA
ASAHI SEIKO
A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.ab∗ ： 21.76 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rautenförmig geflanschte Einheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCFA
ASAHI SEIKO
Diamond-flanged unit with bolt hole at one end on an arc to enable free adjustment of the shaft center when installing.ab∗ ： 21.76 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch UP-Modell
ASAHI SEIKO
[Features]
· Smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.- Mengenrabatt
ab∗ ： 13.88 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Quadratischer Flansch, Zylinderbohrungsmodell mit Stellschraube UCF-Modell
ASAHI SEIKO
[Features]
· The bearing box is a rectangular shape, and is mounted to the side walls of machinery. As a result, the bearing mounting part has a simple structure and can be used for a wide range of applications.- Mengenrabatt
ab∗ ： 13.77 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmiges Flansch-Modell Exzenterrad Methoden rostfreier Edelstahl Silber Wirtschaftliche Serie
ASAHI SEIKO
[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.ab∗ ： 54.85 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rundflansch-Einheit mit Pilot-Zylinderloch-Modell mit Stellschraube (UCFC-Serie)
ASAHI SEIKO
[Features]
· The bearing box mounting surface is fitted with a spigot joint which embeds itself in the partnered material, minimizing eccentricity during mounting for accurate positioning.ab∗ ： 21.38 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stahlplatte mit Rundflanscheinheit, Ausführung mit zylindrischer Bohrung und Stellschrauben, Ausführung BPF CUCF
ASAHI SEIKO
Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.ab∗ ： 14.13 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Aufwickeleinheit mit Rahmen, Ausführung mit zylindrischer Bohrung und Stellschrauben, Ausführung UCT200+WB
ASAHI SEIKO
Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.ab∗ ： 131.51 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Stehlagereinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCPH
ASAHI SEIKO
Pillow-type unit UCP200-type bearing box with raised center height.ab∗ ： 22.85 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmige Flansch-Modell-Einheit Zylinderloch-Modell mit Feststellschraube UCFL-Modell
ASAHI SEIKO
[Features]
· The bearing box is a diamond shape mounted with two bolts, so it can be used in any place and is simple to mount to machinery.- Mengenrabatt
- Auf Lager
ab∗ ： 13.43 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rautenförmig geflanschte Einheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung BFL
ASAHI SEIKO
The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.ab∗ ： 17.41 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Patroneneinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCC
ASAHI SEIKO
Combines bearings with a cylindrical bearing box made of cast iron with the outer diameter surface given a grinding finish. The entire unit can be used in the same way as a general bearing, and it is suitable for a transmission shaft that expands and contracts.ab∗ ： 50.22 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Modell mit Gewindestiften, Einsatzlager und Zylinderloch, UC-Serie
ASAHI SEIKO
[Features]
· Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.- Mengenrabatt
ab∗ ： 10.06 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stehlager, Exzenterradstil, Edelstahl Silver, Eco-Serie MUSP-Modell
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.ab∗ ： 55.96 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stahlplatte mit Stehlagereinheit Ausführung mit zylindrischer Bohrung und Stellschrauben, Ausführung BPP
ASAHI SEIKO
Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.ab∗ ： 13.31 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rautenförmig geflanschte Einheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung BLFL
ASAHI SEIKO
The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.ab∗ ： 14.22 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Hängeeinheit Zylinderloch, Modell mit Feststellschrauben UCECH-Modell
ASAHI SEIKO
[Features]
· The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.ab∗ ： 22.66 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch MUP-Modell
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.ab∗ ： 43.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Spannlager, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung B
ASAHI SEIKO
Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.ab∗ ： 9.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Spannlager / MUC204 / Edelstahl / innen zylindrisch / Gewindestiftklemmung
ASAHI SEIKO
[Features]
· Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.ab∗ ： 54.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Joinbal-Gelenklager mit Außengewinde JAM-Ausführung
ASAHI SEIKO
[Features]
· The space between the two inserts is an oil sump, and the product is structured to maintain an arbitrary gap.- Mengenrabatt
ab∗ ： 20.01 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Joinbal-Gelenklager aus PTFE-ausgekleidetem Edelstahl mit Innengewinde FDF-Ausführung
ASAHI SEIKO
[Features]
· Because it uses a solid lubricating method, greasy supply is not required. Made of stainless steel.ab∗ ： 41.74 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Spezifikationen |
| Ausführung |
| Ausführung - Lagereinheit |
| [d] Durchmesser - Wellenbohrung(mm) |
| Werkstoff - Lagergehäuse |
| Form - Lagerinnendurchmesser |
| Ausführung - Lagerblock |
| Werkstoff - Lagerkugeln |
| Oberflächenbehandlung |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO |
| Artikelserie | Stehlagereinheit, Feststellschraube mit zylindrischem Loch UCP-Modell | Stehlagereinheit Serie Silber, Modell Feststellschraube und zylindrischem Loch KP-Modell | Rautenförmige Flansch-Einheit Silber Serie Zylinderloch-Modell mit Exzenterrad UFL-Modell | Rautenförmige Flansch-Einheit Silber Serie Zylinderloch-Modell mit Exzenterrad MUFL-Modell | Aufwickeleinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCT | Stehlagereinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCPA | Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch UP-Modell | Quadratischer Flansch, Zylinderbohrungsmodell mit Stellschraube UCF-Modell | Rautenförmiges Flansch-Modell Exzenterrad Methoden rostfreier Edelstahl Silber Wirtschaftliche Serie | Rundflansch-Einheit mit Pilot-Zylinderloch-Modell mit Stellschraube (UCFC-Serie) | Stehlagereinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCPH | Rautenförmige Flansch-Modell-Einheit Zylinderloch-Modell mit Feststellschraube UCFL-Modell | Patroneneinheit, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung UCC | Modell mit Gewindestiften, Einsatzlager und Zylinderloch, UC-Serie | Stehlager, Exzenterradstil, Edelstahl Silver, Eco-Serie MUSP-Modell | Hängeeinheit Zylinderloch, Modell mit Feststellschrauben UCECH-Modell | Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch MUP-Modell | Spannlager, Ausführung mit zylindrischer Bohrung mit Gewindestiften, Ausführung B | Spannlager / MUC204 / Edelstahl / innen zylindrisch / Gewindestiftklemmung | Joinbal-Gelenklager aus PTFE-ausgekleidetem Edelstahl mit Innengewinde FDF-Ausführung | ||||||||
| ab∗ | 13.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.41 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.53 € *Stückpreis Standardkonfiguration | 13.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.76 € *Stückpreis Standardkonfiguration | 21.76 € *Stückpreis Standardkonfiguration | 13.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 54.85 € *Stückpreis Standardkonfiguration | 21.38 € *Stückpreis Standardkonfiguration | 14.13 € *Stückpreis Standardkonfiguration | 131.51 € *Stückpreis Standardkonfiguration | 22.85 € *Stückpreis Standardkonfiguration | 13.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.41 € *Stückpreis Standardkonfiguration | 50.22 € *Stückpreis Standardkonfiguration | 10.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 55.96 € *Stückpreis Standardkonfiguration | 13.31 € *Stückpreis Standardkonfiguration | 14.22 € *Stückpreis Standardkonfiguration | 22.66 € *Stückpreis Standardkonfiguration | 43.11 € *Stückpreis Standardkonfiguration | 9.91 € *Stückpreis Standardkonfiguration | 54.09 € *Stückpreis Standardkonfiguration | 20.01 € *Stückpreis Standardkonfiguration | 41.74 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | 10 Arbeitstage | 10 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Spezifikationen |
|
|
|
| ||||||||||||||||||||||||
| Ausführung | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Lagereinheit | Sonstige | Sonstige |
| Ausführung - Lagereinheit | Stehlager | Stehlager | Abgeflachter Rundflansch | Abgeflachter Rundflansch | Spannlager | Abgeflachter Rundflansch | Stehlager | Abgeflachter Rundflansch | Stehlager | Quadratflansch | Abgeflachter Rundflansch | Rundflansch | Abgeflachter Rundflansch | Spannlager | Stehlager | Abgeflachter Rundflansch | Abgeflachter Rundflansch | Sonstige | Sonstige | Stehlager | Stehlager | Abgeflachter Rundflansch | Sonstige | Stehlager | Sonstige | Sonstige | - | - |
| [d] Durchmesser - Wellenbohrung(mm) | 12 ～ 140 | 10 ～ 30 | 8 ～ 30 | 10 ～ 30 | 12 ～ 140 | 10 ～ 30 | 12 ～ 50 | 17 ～ 50 | 10 ～ 30 | 12 ～ 140 | 10 ～ 25 | 12 ～ 100 | 20 | 20 ～ 65 | 12 ～ 50 | 12 ～ 60 | 20 | 50 | 15 ～ 70 | 12 ～ 25 | 12 ～ 35 | 12 ～ 35 | 12 ～ 50 | 10 ～ 30 | 20 | 20 | 8 | 6 ～ 12 |
| Werkstoff - Lagergehäuse | Gusseisen | Sonstige | Sonstige | Sonstige | Gusseisen | Sonstige | Gusseisen | Gusseisen | Sonstige | Gusseisen | - | Gusseisen | Rostfreier Stahl | Gusseisen | Gusseisen | Gusseisen | Gusseisen | Gusseisen | Gusseisen | - | Stahlplatte | Gusseisen | Gusseisen | Sonstige | Gusseisen | Rostfreier Stahl | - | - |
| Form - Lagerinnendurchmesser | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Stellschraube | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Kegelbohrung - Adapter | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Stellschraube | Zylinderbohrung - Stellschraube | - | - |
| Ausführung - Lagerblock | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Leichtbauweise | - | Standard | Standard | Standard | Standard | Hohe Montage | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Leichtbauweise | Standard | Standard | - | - |
| Werkstoff - Lagerkugeln | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Stahl | - | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | - | Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | - | - |
| Oberflächenbehandlung | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | - | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | - | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | Unbehandelt | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung - Lagereinheit
-
-
-
-
-
-
Spezialflansch -
Sonstige
-
-
[d] Durchmesser - Wellenbohrung(mm)
- 6
- 8
- 10
- 12
- 12.7
- 15
- 15,875
- 15.875
- 16
- 17
- 19,05 - 30
- 19.05
- 20
- 22,225 - 35
- 22.225
- 25
- 25.4
- 28,575 - 40
- 28.575
- 30
- 30.163
- 31,75 - 50
- 31.75
- 34.925
- 35
- 36,513 - 45
- 36,513 - 55
- 38.1
- 40
- 41,275 - 60
- 41.275
- 44.45
- 45
- 47,625 - 65
- 47.625
- 49.213
- 50
- 50.8
- 53,975 - 75
- 55
- 55,563 - 80
- 60
- 61,913 - 90
- 63.5
- 65
- 68.263
- 70
- 74,613 - 85
- 74,613 - 100
- 74.6131
- 75
- 79,375 - 90
- 80
- 85
- 87,313 - 120
- 90
- 95
- 100
- 105
- 110
- 115
- 120
- 125
- 130
- 140
- 160
-
Werkstoff - Lagergehäuse
-
Form - Lagerinnendurchmesser
-
Ausführung - Lagerblock
-
Werkstoff - Lagerkugeln
-
Oberflächenbehandlung
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (13)
- INA (165)
- SKF (113)
- NIPPON PILLOW BLOCK (39)
- ASAHI SEIKO (28)
- NTN (28)
- FSBEARING (11)
- SNR (10)
- ZEN (9)
- FAG (6)
- NKE BEARINGS (4)
- KMT BEARINGS (1)
- TIMKEN (1)
- SANWA CONVEYOR (1)
- TOHO (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Eingeschränkte Suche durch Präzisierung der Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 3 Tage oder weniger
- 4 Tage oder weniger
- 5 Tage oder weniger
- 6 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 9 Tage oder weniger
- 10 Tage oder weniger
- 11 Tage oder weniger
Weitere Kategorien aus dem Produktbereich Gehäuselager / Kugellager mit Gehäuse
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.