Druckfedern / UL, UTT / Edelstahl / spiralförmig / Runddraht / 40% (UTT20-40)
- Sonderpreis
- Mengenrabatt
Produktdetails:
Hersteller-Teilenummer: UTT20-40
Marke: MISUMI
Preis: 8.06 €
Lieferzeit: 5 Arbeitstage
Technische Daten:
Zulässige Last (konfigurierbare Bereich): 50.01 bis 73.00 N
Enden, Oberflächenstatus: Geerdet
Maximallast: 62.8 N
Höhe nach eingesetzter max. Last L-F: 24 mm
Freie Länge L: 40 mm
- Bestellmengen erweitert (D-JIT)
- Auf Lager
(i)Hinweis
- Bitte prüfen Sie den Inhalt auf unserer Website, da die PDF-Datei nicht die aktuellsten Informationen enthält.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
UTT20-40
- Zeichnung/Spezifikationen
- 3D-Vorschau Die 3D-Vorschau ist nach vollständiger Konfiguration verfügbar
- Teilenummern
- Katalog
- Technische Informationen
Spezifikationen
| Teilenummer |
| UL16-80 UTT16-80 |
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Stückpreis | ||
| Ausführung D-L | |||||||
| UL 2- | 5* | 0.2 | 1.65 | 2 | 0.98 | {0.1} | |
| 10* | 0.26 | 5.07 | 4 | 1.96 | {0.2} | ||
| 15* | 0.26 | 5.07 | 6 | 2.94 | {0.3} | ||
| 20* | 0.3 | 9.9 | 8 | 3.92 | {0.4} | ||
| 25* | 0.32 | 14.1 | 10 | 4.90 | {0.5} | ||
| 30* | 0.32 | 14.1 | 12 | 5.88 | {0.6} | ||
| UL 3- | 5* | 0.30 | 2 | 2 | 2.0 | {0.2} | |
| 10* | 0.35 | 3.7 | 4 | 3.9 | {0.4} | ||
| 15* | 0.4 | 6.6 | 6 | 5.9 | {0.6} | ||
| 20* | 0.4 | 6.6 | 8 | 7.8 | {0.8} | ||
| 25* | 0.45 | 11.7 | 10 | 9.8 | {1 } | ||
| 30* | 0.45 | 11.7 | 12 | 11.8 | {1.2} | ||
| 35* | 0.45 | 11.7 | 14 | 13.7 | {1.4} | ||
| 40* | 0.5 | 20 | 16 | 15.7 | {1.6} | ||
| UL 4- | 5* | 0.35 | 2.1 | 2 | 2.0 | {0.2} | |
| 10* | 0.45 | 5.3 | 4 | 3.9 | {0.4} | ||
| 15* | 0.45 | 5.3 | 6 | 5.9 | {0.6} | ||
| 20* | 0.5 | 8 | 8 | 7.8 | {0.8} | ||
| 25* | 0.5 | 8 | 10 | 9.8 | {1 } | ||
| 30* | 0.55 | 12.7 | 12 | 11.8 | {1.2} | ||
| 35* | 0.55 | 12.7 | 14 | 13.7 | {1.4} | ||
| 40 | 0.6 | 19.8 | 16 | 15.7 | {1.6} | ||
| 45 | 0.6 | 19.8 | 18 | 17.7 | {1.8} | ||
| 50 | 0.6 | 19.8 | 20 | 19.6 | {2 } | ||
| 60 | 0.65 | 29.9 | 24 | 23.5 | {2.4} | ||
| UL 5- | 5* | 0.4 | 2.2 | 2 | 2.0 | {0.2} | |
| 10* | 0.5 | 4.75 | 4 | 3.9 | {0.4} | ||
| 15* | 0.5 | 4.75 | 6 | 5.9 | {0.6} | ||
| 20* | 0.55 | 6.88 | 8 | 7.8 | {0.8} | ||
| 25* | 0.55 | 6.88 | 10 | 9.8 | {1 } | ||
| 30 | 0.65 | 14.95 | 12 | 11.8 | {1.2} | ||
| 35 | 0.65 | 14.95 | 14 | 13.7 | {1.4} | ||
| 40 | 0.65 | 14.95 | 16 | 15.7 | {1.6} | ||
| 45 | 0.7 | 21.7 | 18 | 17.7 | {1.8} | ||
| 50 | 0.7 | 21.7 | 20 | 19.6 | {2 } | ||
| 60 | 0.75 | 30.75 | 24 | 23.5 | {2.4} | ||
| UL 6- | 5* | 0.45 | 2.3 | 2 | 2.0 | {0.2} | |
| 10* | 0.55 | 4.4 | 4 | 3.9 | {0.4} | ||
| 15* | 0.55 | 4.4 | 6 | 5.9 | {0.6} | ||
| 20 | 0.65 | 8.5 | 8 | 7.8 | {0.8} | ||
| 25 | 0.65 | 8.5 | 10 | 9.8 | {1 } | ||
| 30 | 0.7 | 12.6 | 12 | 11.8 | {1.2} | ||
| 35 | 0.7 | 12.6 | 14 | 13.7 | {1.4} | ||
| 40 | 0.7 | 12.6 | 16 | 15.7 | {1.6} | ||
| 45 | 0.75 | 17.3 | 18 | 17.7 | {1.8} | ||
| 50 | 0.75 | 17.3 | 20 | 19.6 | {2 } | ||
| 60 | 0.8 | 24.8 | 24 | 23.5 | {2.4} | ||
| 70 | 0.8 | 24.8 | 28 | 27.5 | {2.8} | ||
| UL 8- | 10 | 0.65 | 4.6 | 4 | 3.9 | {0.4} | |
| 15 | 0.75 | 8.3 | 6 | 5.9 | {0.6} | ||
| 20 | 0.75 | 8.3 | 8 | 7.8 | {0.8} | ||
| 25 | 0.75 | 8.3 | 10 | 9.8 | {1 } | ||
| 30 | 0.8 | 10.4 | 12 | 11.8 | {1.2} | ||
| 35 | 0.8 | 10.4 | 14 | 13.7 | {1.4} | ||
| 40 | 0.8 | 10.4 | 16 | 15.7 | {1.6} | ||
| 45 | 0.85 | 14.5 | 18 | 17.7 | {1.8} | ||
| 50 | 0.85 | 14.5 | 20 | 19.6 | {2 } | ||
| 60 | 0.9 | 18 | 24 | 23.5 | {2.4} | ||
| 70 | 1.0 | 30 | 28 | 27.5 | {2.8} | ||
| 80 | 1.0 | 30 | 32 | 31.4 | {3.2} | ||
| UL 10- | 10 | 0.75 | 4.7 | 4 | 3.9 | {0.4} | |
| 15 | 0.8 | 6.2 | 6 | 5.9 | {0.6} | ||
| 20 | 0.8 | 6.2 | 8 | 7.8 | {0.8} | ||
| 25 | 0.9 | 9.5 | 10 | 9.8 | {1 } | ||
| 30 | 0.9 | 9.5 | 12 | 11.8 | {1.2} | ||
| 35 | 0.9 | 9.5 | 14 | 13.7 | {1.4} | ||
| 40 | 1.0 | 15.5 | 16 | 15.7 | {1.6} | ||
| 45 | 1.0 | 15.5 | 18 | 17.7 | {1.8} | ||
| 50 | 1.0 | 15.5 | 20 | 19.6 | {2 } | ||
| 60 | 1.1 | 23.7 | 24 | 23.5 | {2.4} | ||
| 70 | 1.1 | 23.7 | 28 | 27.5 | {2.8} | ||
| 80 | 1.1 | 23.7 | 32 | 31.4 | {3.2} | ||
| UL 12- | 15 | 0.9 | 6.75 | 6 | 5.9 | {0.6} | |
| 20 | 1 | 10 | 8 | 7.8 | {0.8} | ||
| 25 | 1 | 10 | 10 | 9.8 | {1.0} | ||
| 30 | 1.1 | 14.85 | 12 | 11.8 | {1.2} | ||
| 35 | 1.1 | 14.85 | 14 | 13.7 | {1.4} | ||
| 40 | 1.2 | 21.6 | 16 | 15.7 | {1.6} | ||
| 45 | 1.2 | 21.6 | 18 | 17.7 | {1.8} | ||
| 50 | 1.2 | 21.6 | 20 | 19.6 | {2.0} | ||
| 60 | 1.3 | 32.5 | 24 | 23.5 | {2.4} | ||
| 70 | 1.3 | 32.5 | 28 | 27.5 | {2.8} | ||
| 80 | 1.4 | 46.2 | 32 | 31.4 | {3.2} | ||
| UL 13- | 15 | 0.9 | 5.4 | 6 | 5.9 | {0.6} | |
| 20 | 1.0 | 8.25 | 8 | 7.8 | {0.8} | ||
| 25 | 1.0 | 8.25 | 10 | 9.8 | {1 } | ||
| 30 | 1.1 | 12.1 | 12 | 11.8 | {1.2} | ||
| 35 | 1.1 | 12.1 | 14 | 13.7 | {1.4} | ||
| 40 | 1.1 | 12.1 | 16 | 15.7 | {1.6} | ||
| 45 | 1.2 | 16.8 | 18 | 17.7 | {1.8} | ||
| 50 | 1.2 | 16.8 | 20 | 19.6 | {2 } | ||
| 60 | 1.2 | 16.8 | 24 | 23.5 | {2.4} | ||
| 70 | 1.4 | 35 | 28 | 27.5 | {2.8} | ||
| 80 | 1.4 | 35 | 32 | 31.4 | {3.2} | ||
| UL 16- | 15 | 1.1 | 7.7 | 6 | 5.9 | {0.6} | |
| 20 | 1.1 | 7.7 | 8 | 7.8 | {0.8} | ||
| 25 | 1.2 | 10.8 | 10 | 9.8 | {1 } | ||
| 30 | 1.2 | 10.8 | 12 | 11.8 | {1.2} | ||
| 35 | 1.3 | 14.3 | 14 | 13.7 | {1.4} | ||
| 40 | 1.3 | 14.3 | 16 | 15.7 | {1.6} | ||
| 45 | 1.4 | 19.6 | 18 | 17.7 | {1.8} | ||
| 50 | 1.4 | 19.6 | 20 | 19.6 | {2 } | ||
| 60 | 1.4 | 19.6 | 24 | 23.5 | {2.4} | ||
| 70 | 1.5 | 27 | 28 | 27.5 | {2.8} | ||
| 80 | 1.5 | 27 | 32 | 31.4 | {3.2} | ||
| UL 20- | 20 | 1.6 | 10.4 | 8 | 23.5 | {2.4} | |
| 25 | 1.6 | 10.4 | 10 | 29.4 | {3 } | ||
| 30 | 1.7 | 12.8 | 12 | 35.3 | {3.6} | ||
| 35 | 1.7 | 12.8 | 14 | 41.2 | {4.2} | ||
| 40 | 1.8 | 15.3 | 16 | 47.1 | {4.8} | ||
| 45 | 1.8 | 15.3 | 18 | 53.0 | {5.4} | ||
| 50 | 2 | 23 | 20 | 58.8 | {6 } | ||
| 60 | 2 | 23 | 24 | 70.6 | {7.2} | ||
| 70 | 2.2 | 35.2 | 28 | 82.4 | {8.4} | ||
| 80 | 2.2 | 35.2 | 32 | 94.1 | {9.6} | ||
{kgf}=Nx0.101972
Für Ausführungen mit * gilt: beide Enden sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
| Teilenummer | d | Feste Länge | F max. | N{kgf} | Fa% | Stückpreis | ||
| Ausführung D-L | Max. | |||||||
| UTT 3- | 5* | 0.35 | 2.8 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.4 | 4.8 | 4 | 5.9 | {0.6} | |||
| 15* | 0.45 | 8.3 | 6 | 8.8 | {0.9} | |||
| 20* | 0.45 | 8.3 | 6 | 8.8 | {0.9} | 30 | ||
| 25* | 0.5 | 14 | 8 | 11.8 | {1.2} | 32 | ||
| 30* | 0.5 | 14 | 8 | 11.8 | {1.2} | 27 | ||
| UTT 4- | 5* | 0.4 | 2.6 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.45 | 3.9 | 4 | 5.9 | {0.6} | |||
| 15* | 0.5 | 6 | 6 | 8.8 | {0.9} | |||
| 20* | 0.55 | 9.4 | 8 | 11.8 | {1.2} | |||
| 25 | 0.6 | 14.4 | 10 | 14.7 | {1.5} | |||
| 30 | 0.6 | 14.4 | 9.9 | 14.7 | {1.5} | 33 | ||
| UTT 5- | 5* | 0.45 | 2.6 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.5 | 3.6 | 4 | 5.9 | {0.6} | |||
| 15 | 0.6 | 7.5 | 6 | 8.8 | {0.9} | |||
| 20 | 0.6 | 7.5 | 8 | 11.8 | {1.2} | |||
| 25 | 0.65 | 10.7 | 10 | 14.7 | {1.5} | |||
| 30 | 0.7 | 15.4 | 12 | 17.7 | {1.8} | |||
| 35 | 0.7 | 15.4 | 14 | 20.6 | {2.1} | |||
| UTT 6- | 5* | 0.5 | 2.4 | 2 | 3.9 | {0.4} | 40 | |
| 10 | 0.6 | 4.2 | 4 | 7.8 | {0.8} | |||
| 15 | 0.7 | 7.4 | 6 | 11.8 | {1.2} | |||
| 20 | 0.7 | 7.4 | 8 | 15.7 | {1.6} | |||
| 25 | 0.8 | 13.6 | 10 | 19.6 | {2.0} | |||
| 30 | 0.8 | 13.6 | 12 | 23.5 | {2.4} | |||
| 35 | 0.85 | 17.5 | 14 | 27.5 | {2.8} | |||
| 40 | 0.9 | 23.4 | 16 | 31.4 | {3.2} | |||
| 45 | 0.9 | 23.4 | 18 | 35.3 | {3.6} | |||
| 50 | 0.9 | 23.4 | 18 | 35.3 | {3.6} | 36 | ||
| 60 | 1.0 | 41 | 18 | 35.3 | {3.6} | 30 | ||
| 70 | 1.0 | 41 | 24 | 47.1 | {4.8} | 34 | ||
| UTT 8- | 10 | 0.75 | 5.3 | 4 | 7.8 | {0.8} | 40 | |
| 15 | 0.75 | 5.3 | 6 | 11.8 | {1.2} | |||
| 20 | 0.9 | 10.4 | 8 | 15.7 | {1.6} | |||
| 25 | 0.9 | 10.4 | 10 | 19.6 | {2.0} | |||
| 30 | 1.0 | 17 | 12 | 23.5 | {2.4} | |||
| 35 | 1.0 | 17 | 14 | 27.5 | {2.8} | |||
| 40 | 1.0 | 17 | 16 | 31.4 | {3.2} | |||
| 45 | 1.1 | 25.3 | 18 | 35.3 | {3.6} | |||
| 50 | 1.1 | 25.3 | 20 | 39.2 | {4.0} | |||
| 60 | 1.1 | 25.3 | 24 | 47.1 | {4.8} | |||
| 70 | 1.2 | 39.6 | 23.8 | 54.9 | {5.6} | |||
| UTT 10- | 10 | 0.85 | 5.1 | 4 | 7.8 | {0.8} | 40 | |
| 15 | 0.85 | 5.1 | 6 | 11.8 | {1.2} | |||
| 20 | 1.0 | 9.5 | 8 | 15.7 | {1.6} | |||
| 25 | 1.0 | 9.5 | 10 | 19.6 | {2.0} | |||
| 30 | 1.1 | 14.3 | 12 | 23.5 | {2.4} | |||
| 35 | 1.1 | 14.3 | 14 | 27.5 | {2.8} | |||
| 40 | 1.2 | 20.4 | 16 | 31.4 | {3.2} | |||
| 45 | 1.2 | 20.4 | 18 | 35.3 | {3.6} | |||
| 50 | 1.2 | 20.4 | 20 | 39.2 | {4.0} | |||
| 60 | 1.3 | 29.9 | 24 | 47.1 | {4.8} | |||
| 70 | 1.4 | 43.4 | 23.8 | 47.1 | {4.8} | 34 | ||
| UTT 13- | 15 | 1.0 | 5.75 | 6 | 11.8 | {1.2} | 40 | |
| 20 | 1.2 | 10.5 | 8 | 15.7 | {1.6} | |||
| 25 | 1.2 | 10.5 | 10 | 19.6 | {2.0} | |||
| 30 | 1.3 | 15 | 12 | 23.5 | {2.4} | |||
| 35 | 1.3 | 15 | 14 | 27.5 | {2.8} | |||
| 40 | 1.4 | 20.3 | 16 | 31.4 | {3.2} | |||
| 45 | 1.4 | 20.3 | 18 | 35.3 | {3.6} | |||
| 50 | 1.5 | 27.8 | 20 | 39.2 | {4.0} | |||
| 60 | 1.5 | 27.8 | 24 | 47.1 | {4.8} | |||
| 70 | 1.6 | 38.4 | 28 | 54.9 | {5.6} | |||
| 80 | 1.6 | 38.4 | 32 | 62.8 | {6.4} | |||
| UTT 16- | 15 | 1.2 | 7.2 | 6 | 11.8 | {1.2} | 40 | |
| 20 | 1.3 | 9.1 | 8 | 15.7 | {1.6} | |||
| 25 | 1.3 | 9.1 | 10 | 19.6 | {2.0} | |||
| 30 | 1.4 | 12.3 | 12 | 23.5 | {2.4} | |||
| 35 | 1.5 | 16.5 | 14 | 27.5 | {2.8} | |||
| 40 | 1.6 | 21.6 | 16 | 31.4 | {3.2} | |||
| 45 | 1.6 | 21.6 | 18 | 35.3 | {3.6} | |||
| 50 | 1.7 | 28 | 20 | 39.2 | {4.0} | |||
| 60 | 1.7 | 28 | 24 | 47.1 | {4.8} | |||
| 70 | 1.8 | 36 | 28 | 54.9 | {5.6} | |||
| 80 | 1.8 | 36 | 32 | 62.8 | {6.4} | |||
| UTT 20- | 20 | 1.7 | 10.6 | 8 | 31.4 | {3.2} | 40 | |
| 25 | 1.8 | 12.6 | 10 | 39.2 | {4.0} | |||
| 30 | 1.8 | 12.6 | 12 | 47.1 | {4.8} | |||
| 35 | 2.0 | 19 | 14 | 54.9 | {5.6} | |||
| 40 | 2.0 | 19 | 16 | 62.8 | {6.4} | |||
| 45 | 2.0 | 19 | 18 | 70.6 | {7.2} | |||
| 50 | 2.2 | 27.5 | 20 | 78.5 | {8.0} | |||
| 60 | 2.2 | 27.5 | 24 | 94.1 | {9.6} | |||
| 70 | 2.3 | 34.5 | 28 | 109.8 | {11.2} | |||
| 80 | 2.4 | 40.8 | 32 | 125.5 | {12.8} | |||
{kgf}=Nx0.101972
Für Ausführungen mit * gilt: beide Enden sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
| Ausführung | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | |||||||||||||||||||
| D | ||||||||||||||||||||||||||||
| 2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | ||||||||||||||||||||||||
| 3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | ||||||||||||||||||||||
| 4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | |||||||||||||||||||||||||
| 5 | ||||||||||||||||||||||||||||
| 6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | ||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||
| 10 | N/mm 0.2 {kgf/mm} {0.02} | |||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||
| 13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | ||||||||||||||||||||||||||
| 14 | ||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||
| 20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | ||||||||||||||||||||
| Fmax. | F=L×70% | F = L × Fa% | F = L × Fa% | F = L × 45% | F=Lx40% | F = L × Fa% | F = L × Fa% | F = L × Fa% | F = L × Fa% | |||||||||||||||||||
Optionen
Teilenummer:
- Um die 3D Vorschau anzeigen zu können, muss die Konfiguration abgeschlossen sein.
3D Vorschau nicht verfügbar, da noch keine Teilenummer generiert wurde.
Teilenummer
|
|---|
| UTT20-40 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Toleranzänderung | Zulässige Auslenkung (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8.06 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 50.01 bis 73.00 | Geerdet | 62.8 | 24 | 40 | 20 | 3.9 | 2 | 19 | - | 16 |
Loading...
Grundlegende Informationen
| Werkstoff | EN 1.4301 (WPB) Äquiv. |
|---|
Sie befinden sich auf der Seite für Druckfedern / UL, UTT / Edelstahl / spiralförmig / Runddraht / 40%, die Teilenummer ist UTT20-40.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer UTT20-40.
Konfigurieren
Basiseigenschaften
-
Toleranzänderung
- LKC (with Tolerance Change)
-
Ausführung
- UL
- UTT
-
Zulässige Last (konfigurierbare Bereich)(N)
- Bis zu 1,50
- 1.51 bis 4.50
- 4.51 bis 8.50
- 8.51 bis 16.00
- 16.01 bis 30.00
- 30.01 bis 50.00
- 50.01 bis 73.00
- 73.01 bis 107.00
- 107.01 bis 150.00
-
Enden, Oberflächenstatus
- Geerdet
- Nicht geerdet
-
Maximallast(N)
-
Höhe nach eingesetzter max. Last L-F(mm)
-
Freie Länge L(mm)
-
Außen-Ø D (oder D1)(mm)
-
Federkonstante(N/mm)
-
Draht-Ø(mm)
-
Feste Länge(mm)
- 1.65
- 2.1
- 2.2
- 2.3
- 2.4
- 2.6
- 2.8
- 3.6
- 3.7
- 3.9
- 4.2
- 4.4
- 4.6
- 4.7
- 4.75
- 4.8
- 5.07
- 5.1
- 5.3
- 5.4
- 5.75
- 6
- 6.2
- 6.5
- 6.6
- 6.88
- 7.2
- 7.4
- 7.5
- 7.7
- 8
- 8.25
- 8.3
- 8.5
- 9
- 9.1
- 9.4
- 9.5
- 9.9
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 11.7
- 12.1
- 12.3
- 12.5
- 12.6
- 12.7
- 12.8
- 13.6
- 14
- 14.1
- 14.3
- 14.4
- 14.5
- 14.95
- 15
- 15.3
- 15.4
- 15.5
- 16.5
- 16.8
- 17
- 17.3
- 17.5
- 18
- 19
- 19.6
- 19.8
- 20
- 20.3
- 20.4
- 21.6
- 21.7
- 23
- 23.4
- 23.7
- 24
- 24.8
- 25.3
- 27
- 27.5
- 27.8
- 28
- 29.9
- 30
- 30.75
- 32
- 34.5
- 35
- 35.2
- 36
- 38.4
- 39.6
- 40.8
- 41
- 43.4
-
Filtern nach CAD Format
- 2D
- 3D
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 5 Tage oder weniger
- 9 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Produktvarianten
| Teilenummer |
|---|
| UL10-15-LKC |
| UL10-20 |
| UL10-20-LKC |
| UTT20-40-LKC |
| UTT20-45 |
| UTT20-45-LKC |
| Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Toleranzänderung | Zulässige Auslenkung (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6.05 € | 1 | Verfügbar | 9 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 5.9 | 9 | 15 | 10 | 0.98 | 0.8 | 6.2 | LKC (with Tolerance Change) | 6 | |
2.39 € | 1 | Verfügbar |
Versand am selben Tag
Auf Lager | 10 | 4.51 bis 8.50 | Geerdet | 7.8 | 12 | 20 | 10 | 0.98 | 0.8 | 6.2 | - | 8 | |
6.05 € | 1 | Verfügbar | 9 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 7.8 | 12 | 20 | 10 | 0.98 | 0.8 | 6.2 | LKC (with Tolerance Change) | 8 | |
17.62 € | 1 | Verfügbar | 9 Arbeitstage | 10 | 50.01 bis 73.00 | Geerdet | 62.8 | 24 | 40 | 20 | 3.9 | 2 | 19 | LKC (with Tolerance Change) | 16 | |
8.06 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 50.01 bis 73.00 | Geerdet | 70.6 | 27 | 45 | 20 | 3.9 | 2 | 19 | - | 18 | |
17.62 € | 1 | Verfügbar | 9 Arbeitstage | 10 | 50.01 bis 73.00 | Geerdet | 70.6 | 27 | 45 | 20 | 3.9 | 2 | 19 | LKC (with Tolerance Change) | 18 |
Ergänzungsartikel
-
Halter für Zugfedern / Schlüsselflächen / Mit Kerbe
MISUMI Standardpreis 5.09 € Lieferzeit: Versand am selben Tag
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.