Innensechskantschlüssel（Single Product/Set Classification：Einzelstück Seite 2）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Langarm-Kugelkopf-Innensechskantschlüssel (lange Ausführung)
TRUSCO NAKAYAMA
[Features]
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
· Matte chrome plating.
· The hardness is HRC 55-60.
· Ideal for fastening in deep places.
· High-torque, tough nickel-chrome-molybdenum steel has been used.
· Holder can be rotated to easily take out and put back different sizes of wrenches.› Jetzt konfigurierenab∗ ： 7.17 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel mit T-Griff, schwarz eloxiert
TRUSCO NAKAYAMA
[Features]
· Suitable for machine maintenance and maintenance repair work.
· Can be used with one side of the ballpoint portion tilted 25°.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· Suitable for machine maintenance and maintenance repair work.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.92 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel mit T-Griff, schwarz eloxiert
TRUSCO NAKAYAMA
[Features]
· Suitable for machine maintenance and maintenance repair work.
· Can be used with one side of the ballpoint portion tilted 25°.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· Suitable for machine maintenance and maintenance repair work.› Jetzt konfigurierenab∗ ： 10.82 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel mit T-Griff
TRUSCO NAKAYAMA
[Features]
· T handle type 2-point fastening type.
· The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach.
· The hardness is HRC 45-57.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.20 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel
TRUSCO NAKAYAMA
[Features]
· Use the shorter end and hold the longer end to tighten with greater force. Use the longer end and hold the shorter end to handle the product to tighten at greater rotating speed.
· The hardness is HRC 54-59.
· Made from chrome vanadium steel.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 2.31 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel, Cr-V
TRUSCO NAKAYAMA
[Features]
· Made of chrome vanadium steel (Cr-V).
· The hardness is HRC 50-58.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.91 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (kurze Ausführung)
TRUSCO NAKAYAMA
[Features]
· Made of chrome vanadium steel (Cr-V).
· The hardness is HRC 50-58.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.01 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (T-Ausführung)
TRUSCO NAKAYAMA
[Features]
· Convenient for attachment/removal of hex socket bolts mounted in deep places.
· T-shaped handle is easy to grasp.
· This product has black oxide surface processing.
· The hardness is HRC 50-57.
[Applications]
· For tightening and loosening hex socket bolts.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.52 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 8.10 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 16.92 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel, kurzer Kopf
PB SWISS TOOLS
A hex bar wrench with inimitable measurement accuracy, that keeps the work site tidy.
[Features]
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability created from the adoption of unparalleled dimensional accuracy and tough special alloy.
[Applications]
· The L-shaped hex wrench (mm) is widely used in machinery, metal products, and automotive industries all over the world.
· Sizes are from 0.71 up to 22 mm.
· A tool suitable for the application can be selected from a wide range of products.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 14.55 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Innensechskantschlüssel mit Haltering
PB SWISS TOOLS
Hexagon wrench which makes access to complicated places easy without holding the screw by hand.
[Features]
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability created from the adoption of unparalleled dimensional accuracy and tough special alloy.
· Hex bar wrenches: Chrome plated specification and powder coating types are available.
· Select with or without ball point for long and short products alike.
· Embedded spring ring binds screws and tool firmly for easy assembly in places where access is difficult.
[Applications]
· Helps pick up the right tools. For keeping the work site tidy.
· A tool suitable for the application can be selected from a wide range of products.› Jetzt konfigurierenab∗ ： 20.59 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Innensechskantschlüssel mit Kugelkopf
PB SWISS TOOLS
Allen wrenches are nickel chrome plated, providing rust resistance and long life.
[Features]
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability is created by adoption of this second to none dimension accuracy and tough special alloy.
· Hex bar wrenches: Chrome plated specification and powder coating types are available.
· Select with or without ball point for long and short products alike: we guarantee you'll find what you want.
[Applications]
· Machinery, metal products, automotive industry, etc.
· Sizes are from 0.71 up to 22 mm.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 13.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Innensechskantschlüssel mit Kugelkopf (Zoll)
PB SWISS TOOLS
Boasts an extremely high finishing dimensional accuracy of 1/100 mm. Sizes 1.5 mm or above are nickel chrome plated, providing rust resistance and long life.› Jetzt konfigurierenab∗ ： 18.58 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Innensechskantschlüssel mit Kugelkopf (Regenbogenfarben)
PB SWISS TOOLS
A hex bar wrench ideal for keeping the work site tidy.
[Features]
· Rainbow L-shaped wrenches have attractive color variations. Different colors are used for different sizes.
· The right tool can be confirmed at a glance and picked up in a trice.
· Features rust resistance with special powder coating.
· Boasts an extremely high finishing dimensional accuracy of 1/100 mm. Boasts unparalleled dimensional accuracy.
[Applications]
· Helps pick up the right tools. For keeping the work site tidy.
· With well-regarded rainbow color codes, the tool of your desired size can be detected instantly.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel mit Kugelkopf
PB SWISS TOOLS
A wide variety of hex bar wrenches, ideal for keeping the work site tidy.
[Features]
· Boasts an extremely high finishing dimensional accuracy of 1/100 mm. Handle length conforms to the VSM Swiss standard.
· Sizes 1.5 mm or above are nickel chrome plated, providing rust resistance and long life.
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability created from the adoption of unparalleled dimensional accuracy and tough special alloy.
· Chrome plated specification hexagonal bar wrench.
· Select with or without ball point for long and short products alike.
[Applications]
· Helps pick up the right tools. For keeping the work site tidy.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.25 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel mit Kugelkopf (Zoll)
PB SWISS TOOLS
[Features]
· Boasts an extremely high finishing dimensional accuracy of 1/100 mm.
· Sizes 1.5 mm or above are nickel chrome plated, providing rust resistance and long life.› Jetzt konfigurierenab∗ ： 16.79 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel mit Kugelkopf (Regenbogenfarben)
PB SWISS TOOLS
A hexagonal wrench featuring rust resistance with special powder coating.
[Features]
· PB rainbow wrenches use different colors to allow for easy differentiation between different usage dimensions.
· Boasts an extremely high finishing dimensional accuracy of 1/100 mm. Boasts unparalleled dimensional accuracy.
· Attractive color variations. Different colors are used for different sizes.
[Applications]
· With well-regarded rainbow color codes, the tool of your desired size can be detected instantly.
· Helps pick up the right tools. For keeping the work site tidy.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.25 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
langer Innensechskantschlüssel
PB SWISS TOOLS
A hex bar wrench with inimitable measurement accuracy, that keeps the work site tidy.
[Features]
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability created from the adoption of unparalleled dimensional accuracy and tough special alloy.
[Applications]
· The L-shaped hex wrench (mm) is widely used in machinery, metal products, and automotive industries all over the world.
· Sizes are from 0.71 up to 22 mm.
· A tool suitable for the application can be selected from a wide range of products.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.37 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer Innensechskantschlüssel (Zoll)
PB SWISS TOOLS
Boasts an extremely high finishing dimensional accuracy of 1/100 mm. Sizes 1.5 mm or above are nickel chrome plated, providing rust resistance and long life.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.71 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
L-förmiger Innensechskantschlüssel (Standard-Ausführung)
PB SWISS TOOLS
A hex bar wrench with inimitable measurement accuracy, that keeps the work site tidy.
[Features]
· Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
· A precision tool with excellent durability created from the adoption of unparalleled dimensional accuracy and tough special alloy.
[Applications]
· The L-shaped hex wrench (mm) is widely used in machinery, metal products, and automotive industries all over the world.
· Sizes are from 0.71 up to 22 mm.
· A tool suitable for the application can be selected from a wide range of products.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Regenbogenfarben)
PB SWISS TOOLS
PB rainbow wrenches use different colors so as to allow for easy differentiation between different usage dimensions. Further, it has rust resistance due to a special powder coating. Boasts an extremely high finishing dimensional accuracy of 1/100 mm.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.05 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, Standard)
EIGHT TOOL
[Features]
· Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening.
· The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).
[Applications]
· For tightening hex socket head bolts.› Jetzt konfigurierenab∗ ： 7.45 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, extra lang)
EIGHT TOOL
[Features]
· Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening.
· The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.22 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, halblang)
EIGHT TOOL
[Features]
· Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening.
· The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).
[Applications]
· For tightening hex socket head bolts.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.83 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Quergriff-Sechskant-Schraubendreher (Lang)
PB SWISS TOOLS
[Features]
· This grip fits well in the palm of the hand, perfect for applying torque in narrow spaces.
· Long Type.
· The grip end of 207L-3 includes a shaft that is convenient for quick turning and can be turned with the fingertips- Mengenrabatt
› Jetzt konfigurierenab∗ ： 27.09 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
-
Hochwertiger Innensechskantschlüssel, L-Ausführung, Kugelkopf, lang
KTC(KYOTO TOOL)
[Features]
· High-grade hard chrome plating gives a beautiful and smooth feel, while preventing rust formation.
· The use of carefully selected special alloy steel ensures superior abrasion resistance and powerful torsion.
· The original plastic holder is convenient for carrying or tool management.
[Applications]
· General purpose tool- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.23 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Hochwertiger, L-förmiger Innensechskantschlüssel, Kugelkopf, lang (Zoll)
KTC(KYOTO TOOL)
[Features]
· High-grade hard chrome plating gives a beautiful and smooth feel, while preventing rust formation.
· The use of carefully selected special alloy steel ensures superior abrasion resistance and powerful torsion.
· The original plastic holder is convenient for carrying or tool management.
[Applications]
· General purpose tool› Jetzt konfigurierenab∗ ： 13.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Hochwertiger, L-förmiger Innensechskantschlüssel, Standard
KTC(KYOTO TOOL)
[Features]
· High-grade hard chrome plating gives a beautiful and smooth feel, while preventing rust formation.
· The use of carefully selected special alloy steel ensures superior abrasion resistance and powerful torsion.
· Undergoes top-class heat treatment.
· The original plastic holder is convenient for carrying or tool management.
[Applications]
· General purpose tool- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.02 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
T-förmiger Innensechskantschlüssel
KTC(KYOTO TOOL)
[Features]
· T-shaped handle is suitable for fast rotating work.
· Convenient for attachment/removal of hex socket bolts mounted in deep places.
[Applications]
· General purpose tool- Mengenrabatt
- Auf Lager
› Jetzt konfigurierenab∗ ： 27.14 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 0.71 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Langer, L-förmiger Kugelkopf-Schlüssel, BLB
MAEDAKINNZOKU
Hex wrench ideal for tightening and loosening imperial sized hexagon socket head cap screws and set screws.
[Features]
· A ball point L-type wrench (inch size) that boasts smooth operability and powerful tightening.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· Made of special alloy steel that enhances high torque, durability, and wear resistance.
· High-level heat treatment and hard chrome plating treatment.
· Abrasion of hex parts is prevented, with its toughness (resistance to breaking) increased along with reliable work and safety while the strength level is high.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.32 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Langer, L-förmiger Kugelkopf-Schlüssel, BPL
MAEDAKINNZOKU
Long type L-type hex bar wrench ideal for tightening and loosening hex socket bolts and hex socket set screws.
[Features]
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· A ball point L-type wrench that boasts smooth operability and powerful tightening.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery.› Jetzt konfigurierenab∗ ： 3.17 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Langer, L-förmiger Kugelkopf-Schlüssel, BPLB
MAEDAKINNZOKU
L-type wrench ideal for tightening and loosening imperial sized hexagon socket head cap screws and set screws.
[Features]
· A long type L-type ball point wrench that boasts smooth operability and powerful tightening.
[Applications]
· For maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.› Jetzt konfigurierenab∗ ： 4.76 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
L-förmiger Kurzschaft-Kugelkopf-Schlüssel, BSB-S
MAEDAKINNZOKU
Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· Short neck L-type.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan and other imported machinery.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.22 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
L-förmiger Kurzschaft-Schraubenschlüssel mit langem Kugelkopf, BLB-S
MAEDAKINNZOKU
Hexagonal bar wrench ideal for tightening/loosening inch-sized hexagonal socket bolts, etc., in spaces where there are height restrictions.
[Features]
· Uses a special alloy to enhance torque, durability, and abrasion resistance.
· High-level heat treatment/hard chrome plating treatment.
· The ball point finish enables quick turning and temporary tightening from a diagonal position.
· L-shaped long type with a short underhead length.
[Applications]
· Ideal for maintenance and assembly of devices using imperial-size bolts, such as vehicles from outside Japan, motorcycles, and other imported machinery.› Jetzt konfigurierenab∗ ： 7.22 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
L-förmiger Sechskantschlüssel, HK
MAEDAKINNZOKU
L-type wrench ideal for tightening and loosening hex socket bolts and hex socket set screws.
[Features]
· A hexagonal bar L-type wrench that boasts smooth operability and powerful tightening.
[Applications]
· Ideal for assembly and maintenance work of industrial machinery.› Jetzt konfigurierenab∗ ： 11.64 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, extra lang)
EIGHT TOOL
Sizes are colored to be easily distinguishable and baked coating is luxurious and unlikely to peel off. 2.5-10 mm also come with a silk print size indication. Durability and wear resistance are further improved so that the Taper Head® can be used for final tightening. The torsional strength is 10% to 20% higher than the conventional ball point, and especially effective when used at an inclination (0 to 20°).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 32.06 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Taper Head®, sehr lang) (mit Ummantelung)
EIGHT TOOL
Easy to identify size with coloring of boots. Even if the wrench is broken, the boot prevents the scattering of fragments.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 17.24 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Halblang)
EIGHT TOOL
It is designed for professionals so as to exceed ISO and JIS standards.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 15.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel
TRUSCO NAKAYAMA
Each surface of the edge of the Allen wrench tip is evenly chamfered. Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact. Matte chrome plating.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.81 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Kugelkopf-Innensechskantschlüssel (Zoll)
TRUSCO NAKAYAMA
Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 1.63 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel (Zoll)
TRUSCO NAKAYAMA
Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.64 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
› Jetzt konfigurieren
ab∗ ： 19.19 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Innensechskantschlüssel, Kugelkopf, gebogen, Vierkant
TRUSCO NAKAYAMA
[Features]
· It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
· The special processing technology provides high durability and abrasion resistance.
· Final tightening can also be performed with the ball point part.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.56 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit |
| Spezifikationen |
| Type |
| Tip Type |
| Width across flat dimension(mm) |
| Width across flat dimension(Inch) |
| Single Product/Set Classification |
| Overall length (L dimension)(mm) |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | WERA | WAKAHOI SEISAKU | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | PB SWISS TOOLS | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | SK 11 | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | EIGHT TOOL | EIGHT TOOL | EIGHT TOOL | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TSUNODA | TRUSCO NAKAYAMA |
| Artikelserie | Langarm-Kugelkopf-Innensechskantschlüssel (lange Ausführung) | Kugelkopf-Innensechskantschlüssel mit T-Griff, schwarz eloxiert | Kugelkopf-Innensechskantschlüssel mit T-Griff, schwarz eloxiert | Langer Innensechskantschlüssel mit Kugelkopf (Regenbogenfarben) | Hochwertiger Innensechskantschlüssel, L-Ausführung, Kugelkopf, lang | Hochwertiger, L-förmiger Innensechskantschlüssel, Kugelkopf, lang (Zoll) | L-förmiger Kurzschaft-Schraubenschlüssel mit langem Kugelkopf, BLB-S | Innensechskantschlüssel (Taper Head®, sehr lang) (mit Ummantelung) | |||||||||||||||||||||||||||||||||||||
| ab∗ | 7.17 € *Stückpreis Standardkonfiguration | 8.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.82 € *Stückpreis Standardkonfiguration | 5.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.31 € *Stückpreis Standardkonfiguration | 0.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.10 € *Stückpreis Standardkonfiguration | 16.92 € *Stückpreis Standardkonfiguration | 14.55 € *Stückpreis Standardkonfiguration | 20.59 € *Stückpreis Standardkonfiguration | 13.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.58 € *Stückpreis Standardkonfiguration | 11.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.79 € *Stückpreis Standardkonfiguration | 11.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.45 € *Stückpreis Standardkonfiguration | 7.22 € *Stückpreis Standardkonfiguration | 5.83 € *Stückpreis Standardkonfiguration | 27.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.23 € *Stückpreis Standardkonfiguration | 13.79 € *Stückpreis Standardkonfiguration | 3.02 € *Stückpreis Standardkonfiguration | 27.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.17 € *Stückpreis Standardkonfiguration | 4.76 € *Stückpreis Standardkonfiguration | 6.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.22 € *Stückpreis Standardkonfiguration | 11.64 € *Stückpreis Standardkonfiguration | 32.06 € *Stückpreis Standardkonfiguration | 17.24 € *Stückpreis Standardkonfiguration | 15.87 € *Stückpreis Standardkonfiguration | 8.81 € *Stückpreis Standardkonfiguration | 1.63 € *Stückpreis Standardkonfiguration | 3.64 € *Stückpreis Standardkonfiguration | 19.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.56 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit | 6 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 8 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | Versand am selben Tag | 9 Arbeitstage |
| Spezifikationen |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Type | L-förmiger Sechskantschlüssel | Ausführung T | Ausführung T | Ausführung T | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | L-förmiger Sechskantschlüssel | Ausführung T | L-förmiger Sechskantschlüssel |
| Tip Type | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Kugelkopf | Kugelkopf | Kugelkopf | Standardausführung | Kugelkopf | Kugelkopf | Standardausführung | Standardausführung | Standardausführung | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Kugelkopf | Standardausführung | Kugelkopf | Kugelkopf | Standardausführung | Kugelkopf | Kugelkopf | Standardausführung | Standardausführung | Kugelkopf |
| Width across flat dimension(mm) | 2.5 | 2 | 6 | 3 ～ 6 | 4 | 1.5 ～ 27 | 2 ～ 27 | 3 | 6 | 5 | 6 | 2.5 ～ 10 | 1.27 ～ 19 | - | 1.5 ～ 8 | 1.5 ～ 12 | - | 1.5 ～ 10 | 0.71 ～ 22 | - | 0.71 ～ 22 | 1.5 ～ 10 | 2 | 2 ～ 19 | 2 ～ 5 | 4.5 ～ 10 | 3 | - | 2.5 | 5 ～ 8 | 2.5 | - | 1.5 ～ 10 | - | - | - | 17 ～ 36 | 10 | 6 ～ 8 | 12 ～ 27 | 8 | - | - | 3 ～ 10 | - |
| Width across flat dimension(Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/4 ～ 9/64 | - | - | 1/4 ～ 9/64 | - | - | 1/4 ～ 9/64 | - | - | - | - | - | - | - | 1/4 ～ 9/64 | - | - | 3/32 ～ 5/16 | 1/4 ～ 7/32 | - | 1/4 ～ 7/32 | 1/4 ～ 7/32 | 1/4 ～ 7/32 | - | - | - | - | - | 0.05 ～ 9/64 | 1/4 | - | - |
| Single Product/Set Classification | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück |
| Overall length (L dimension)(mm) | 112 | 150 | 230 | 153 ～ 187 | 80 | 77 ～ 420 | 50 ～ 250 | 150 | 180 | 240 | 100 | 110 ～ 220 | 70 ～ 320 | 70 ～ 220 | 80 ～ 200 | 50 ～ 140 | 45 ～ 112 | 50 ～ 125 | 50 ～ 350 | 70 ～ 220 | 35 ～ 224 | 50 ～ 125 | 58 | 95 ～ 360 | 86 ～ 120 | 190 ～ 245 | 130 | 81 ～ 232 | 62 | 230 ～ 235 | - | 90 ～ 224 | 98 ～ 190 | 105 ～ 190 | 50 ～ 125 | 90 ～ 224 | 160 ～ 355 | 224 | 225 ～ 260 | 206 ～ 375 | 156 | 72 ～ 101 | 135 | 206 ～ 313 | 91 |
| Hex bar wrench underneck length (H dimension) L-shape only(mm) | 36 | - | - | - | 22 | 14 ～ 100 | 16 ～ 100 | - | 32 | - | 13 | 18 ～ 36 | 12 ～ 56 | 12 ～ 35 | 14 ～ 32 | 14 ～ 40 | 12 ～ 32 | 14 ～ 36 | 7 ～ 63 | 14 ～ 35 | 7 ～ 63 | 14 ～ 36 | 12 | 17 ～ 70 | 17 ～ 28 | - | 20 | 15.5 ～ 40.5 | 14.5 | - | - | 14 ～ 40 | 15 ～ 52 | 18 ～ 52 | 4 ～ 18 | 4 ～ 18 | 63 ～ 140 | 40 | 32 ～ 36 | 45 ～ 100 | 36 | 12 ～ 20 | 28 | - | 16 |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Type
-
L-förmiger Sechskantschlüssel
-
Ausführung T
- Messerform
- Dazugehöriges Produkt
- Sonstige
-
L-förmiger Sechskantschlüssel
-
Tip Type
-
Standardausführung
-
Kugelkopf
- Innensechskant, manipulationssicher
- Sonstige
-
Standardausführung
-
Width across flat dimension(mm)
- 0,05
- 0,7
- 0,9
- 0,71
- 0,89
- 0.71
- 0.89
- 1
- 1/ 2
- 1,3
- 1/ 4
- 1,5
- 1,5
2,0
2,5
3,0
4,0
5,0
6,0
8,0
10,0 - 1,5 bis 5
- 1,5 bis 6
- 1,6 (1/16")
- 1/ 8
- 1/16
- 1,27 (1/20")
- 1.27
- 1.27～4.8
- 1.5
- 2
- 2,0
- 2,4 (3/32")
- 2,5
- 2.5
- 3
- 3,0
- 3,2 (1/8")
- 3/4*
- 3/ 8
- 3/16
- 3/32
- 3.5
- 4
- 4.5
- 5
- 5/ 8
- 5/16
- 5/16*
- 5/32
- 5/32*
- 5/64
- 5/64*
- 5.5
- 6
- 7
- 7/8*
- 7/16*
- 7/32
- 8
- 9/32*
- 9/64
- 10
- 12
- 14
- 17
- 19
- 21
- 22
- 24
- 27
- 30
- 32
- 36
-
Width across flat dimension(Inch)
-
Single Product/Set Classification
- Einzelstück
- Produktsatz
-
Overall length (L dimension)(mm)
- 34
- 35
- 40
- 45
- 45、50、56、63、70、79、90
- 45、50、56、63、70、79、90、100、112
- 46
- 47
- 49
- 50
- 51
- 52
- 56
- 58
- 59
- 60
- 61
- 62
- 63
- 65
- 69
- 70
- 71
- 72
- 74
- 75
- 77
- 78
- 80
- 81
- 83
- 84
- 85
- 85 (When stowed)
- 86
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 100
- 101
- 102
- 103
- 105
- 106
- 107
- 110
- 111
- 112
- 113
- 115
- 118
- 119
- 120
- 122
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 139
- 140
- 142
- 144
- 145
- 146
- 150
- 151
- 153
- 154
- 155
- 156
- 158
- 160
- 162
- 163
- 165
- 166
- 167
- 170
- 172
- 173
- 174
- 175
- 176
- 178
- 179
- 180
- 181
- 184
- 185
- 187
- 190
- 195
- 198
- 199
- 200
- 203
- 206
- 207
- 215
- 220
- 224
- 225
- 227
- 228
- 230
- 231
- 232
- 233
- 235
- 238
- 240
- 245
- 248
- 250
- 252
- 260
- 264
- 265
- 266
- 269
- 270
- 273
- 280
- 284
- 290
- 291
- 296
- 300
- 313
- 315
- 316
- 320
- 325
- 330
- 334
- 340
- 350
- 355
- 360
- 370
- 375
- 381
- 388
- 420
- 488
- 500
-
Hex bar wrench underneck length (H dimension) L-shape only(mm)
- 3.5
- 4
- 5
- 6
- 6.5
- 7
- 7.3
- 8
- 9
- 9.5
- 10
- 10.1
- 11
- 11.7
- 12
- 13
- 14
- 14、16、18、20、24、28、32
- 14、16、18、20、24、28、32、36、40
- 14.5
- 15
- 15,5
- 15.5
- 16
- 17
- 17.1
- 17.7
- 18
- 18,0
- 18.3
- 19
- 19.9
- 20
- 20,5
- 21
- 22
- 23
- 23.5
- 24
- 25
- 25.1
- 26
- 27.5
- 28
- 28.3
- 29
- 30
- 31.5
- 31.7
- 32
- 33
- 34
- 35
- 36
- 36.1
- 38
- 40
- 40.5
- 41
- 42
- 43
- 44
- 45
- 47
- 50
- 52
- 53
- 56
- 57
- 63
- 70
- 76
- 80
- 89
- 90
- 100
- 102
- 114
- 125
- 126
- 127
- 140
- 142
- 157
- 176
Marke
-
- TRUSCO NAKAYAMA (22)
- MAEDAKINNZOKU (17)
- PB SWISS TOOLS (14)
- EIGHT TOOL (13)
- MITOLOY (7)
- ASAHI METAL INDUSTRY (5)
- KTC(KYOTO TOOL) (5)
- HOZAN (2)
- WERA (2)
- REYHER (1)
- ANEX (1)
- SK 11 (1)
- SUPER TOOL (1)
- TSUNODA (1)
- WAKAHOI SEISAKU (1)
- WEIDMÜLLER (0)
- BONDHUS (0)
- TRAD (0)
- AMF (0)
- HALDER (0)
- WIHA (0)
- VESSEL (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Innensechskantschlüssel
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Dosensenker
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Drehmomentschlüssel
- Drehmomentschrauber
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Schneidwerkzeuge
- Isolierwerkzeuge
- Werkzeuge für Elektroanlagen
- Hämmer
- Meißel
- Gravierwerkzeuge/Stanzen
- Werkzeug-Sets/Werkzeugkästen
- Cutter, Rollschneider, Skalpellmesser
- Stemmeisen / Hebel
- Auszieher
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
- Stemmwerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.