?* Informationen zur Lieferzeit
Minimum Lieferzeit : | 2 Arbeitstage |
---|
ab∗ : | 12.22 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 1.59 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
GANTER
Nutmuttern GN 1804.1 sind durch die Polyamideinlage selbstsichernd. Sie sind daher auch als Stellmutter einsetzbar. Sie lassen sich außerdem mehrmals verwenden.
Die Gewindereihe entspricht Wälzlager-Nutmuttern DIN 981.
ab∗ : | 1.92 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 2.46 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 4.03 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 2.66 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Nutmuttern mit Gewindesicherung
GANTER
Nutmuttern mit Gewindesicherung GN 1804.2 lassen sich durch ein freigeschnittenes Gewindesegment mittels Gewindestift d4 gegen Verdrehen sichern. Die Sicherung erfolgt dabei beschädigungsfrei über die Gewindeflanken und kann beliebig oft erfolgen.
Die abgesetzte Planfläche d3 ist als axiale Anlagefläche vorzusehen.
ab∗ : | 23.65 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
BGL
Mit Nutmuttern werden Lager auf Wellen oder Spannhülsen fixiert. Gleichzeitig erleichtern sie die Montage der Lager mit kegeligem Wellensitz sowie den Ein- und Ausbau der Lager auf Abziehhülsen.
ab∗ : | 3.95 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 9.04 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 5.10 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 5.13 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 2.42 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
BGL
Die KMT/KMTA Muttern werden mit drei gleichmäßig am Umfang verteilten Sicherungsstiften aus Messing, die schräg in die Mutter eingebracht sind, gesichert
ab∗ : | 38.93 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
GANTER
Bei Nutmuttern DIN 1804 ist die abgesetzte Planfläche d3 als Anlagefläche vorzusehen.
Ab Größe M45x1,5 sind die Nutmuttern mit 6 Nuten versehen.
Das amtliche Normblatt sieht noch weitere Größen bis (M200x3) vor.
ab∗ : | 2.64 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 4.61 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
BGL
Diese Sicherungsmuttern sind mit einem Verschlussbolzen und einem Messingstift (KMP) oder nur einer Schraube (KMFE) ausgestattet. Es sind keine Keilnuten oder Sicherungsscheiben erforderlich.
ab∗ : | 41.23 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Feine U-Muttern SC-Serie (Material: S45C [ausgehärtet]-äquivalent)
FUJI SEIMITSU
Bearing lock nut developed by Fuji Seimitsu Co., Ltd., a pioneer of lock nuts with over 40 years of solid performance and trust.
ab∗ : | 4.85 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Minimum Lieferzeit : | 2 Arbeitstage |
---|
BGL
Diese Sicherungsmuttern sind mit einem Verschlussbolzen und einem Messingstift (KMP) oder nur einer Schraube (KMFE) ausgestattet. Es sind keine Keilnuten oder Sicherungsscheiben erforderlich.
ab∗ : | 35.05 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Hardlock Lagermuttern【1-18 Stk. pro Packung】
HARDLOCK INDUSTRY
Bearing lock nut which employs a wedge-based design. Stability is ensure even for several dozen repetitions.
ab∗ : | 7.76 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 244.25 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
6333S AMF-TWINNUT-Mutter - ohne Bund
AMF
AMF-TWINNUT-Mutter - ohne Bund mit harter Trennsperre.
Blank, Festigkeitsklasse 10. Das Produkt ist pro 1 Stück erhältlich.
ab∗ : | 27.80 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
6333SB AMF-TWINNUT-Mutter - mit Bund
AMF
AMF-TWINNUT-Mutter - mit Bund mit harter Trennsperre.
Blank, Festigkeitsklasse 10. Das Produkt ist pro 1 Stück erhältlich.
ab∗ : | 34.70 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
FUJI SEIMITSU
Simultaneous machining of the thread and the bearing surface, as well as a combination of high surface deflection accuracy and lock functions, ensures that accurate bearing rotation is maintained constantly.
ab∗ : | 16.92 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Feine U-Muttern SS-Serie (Material: SS-äquivalent)
FUJI SEIMITSU
Bearing lock nut developed by Fuji Seimitsu Co., Ltd., a pioneer of lock nuts with over 40 years of solid performance and trust.
Minimum Lieferzeit : | Versand am selben Tag |
---|
ab∗ : | 246.51 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
HALDER
Spannmuttern werden für rotierende Teile, insbesondere für drehrichtungsumschaltbare Wellen verwendet, z. B. zur Schleifscheibenbefestigung. Die kompakte Bauform gewährleistet eine sichere Funktion und ermöglicht eine schnelle Montage mittels Stirnlochschlüssel.
Gegenüber anderen Sicherungsmethoden zeichnet sich die Spannmutter durch folgende Vorteile aus:
ab∗ : | 45.60 € |
---|---|
Minimum Lieferzeit : | 3 Arbeitstage |
*Stückpreis Standardkonfiguration
NTN
An adapter component used to secure tapered hole bearing to an arbitrary position.
ab∗ : | 0.34 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Mutter für Wälzlager, Mutterserie AN
YOKOTA KIKOU
A lock nut used for fixing a bearing in place.
ab∗ : | 1.77 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 5.39 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
GANTER
Bei Edelstahl-Nutmuttern DIN 1804 ist die abgesetzte Planfläche d3 als Anlagefläche vorzusehen.
Ab Größe M45x1,5 sind die Nutmuttern mit 6 Nuten versehen.
ab∗ : | 17.19 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
BGL
Mit Hydraulikmuttern presst man Bauteile mit Ein und Ausbau von Wälzlagern mit kegeliger Bohrung. Die Hydraulikmutter kann auch zum Ausbau von Abzieh‑ und Spannhülsen verwendet werden.
ab∗ : | 1,242.47 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
BGL
Mit Nutmuttern werden Lager auf Wellen oder Spannhülsen fixiert. Gleichzeitig erleichtern sie die Montage der Lager mit kegeligem Wellensitz sowie den Ein- und Ausbau der Lager auf Abziehhülsen.
ab∗ : | 208.95 € |
---|---|
Minimum Lieferzeit : | 21 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
[Shape] Round
[Material] Steel
[Surface Processing] None / Chromate Plating
[Screw Type] Metric Coarse
[Nominal of Thread] M12X1.0/M15X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0
[Type] Lock Nut
ab∗ : | 12.02 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 61.29 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
BGL
Mit Nutmuttern werden Lager auf Wellen oder Spannhülsen fixiert. Gleichzeitig erleichtern sie die Montage der Lager mit kegeligem Wellensitz sowie den Ein- und Ausbau der Lager auf Abziehhülsen.
ab∗ : | 7.90 € |
---|---|
Minimum Lieferzeit : | 21 Arbeitstage |
*Stückpreis Standardkonfiguration
BGL
Sicherungsbleche sind Zubehör für Hülsen, können jedoch auch für spezielle Sicherungsanwendungen zum Einsatzkommen. Ihr Hauptzweck besteht darin, die KM- und KML Muttern zu sichern, so dass sie nicht von der Hülse oder derWelle selbst lösen
ab∗ : | 0.93 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Sicherungsbleche - Reihe MB..A
BGL
Sicherungsbleche sind Zubehör für Hülsen, können jedoch auch für spezielle Sicherungsanwendungen zum Einsatzkommen. Ihr Hauptzweck besteht darin, die KM- und KML Muttern zu sichern, so dass sie nicht von der Hülse oder derWelle selbst lösen
ab∗ : | 1.12 € |
---|---|
Minimum Lieferzeit : | 21 Arbeitstage |
*Stückpreis Standardkonfiguration
BGL
Die KMT/KMTA Muttern werden mit drei gleichmäßig am Umfang verteilten Sicherungsstiften aus Messing, die schräg in die Mutter eingebracht sind, gesichert
ab∗ : | 45.05 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Minimum Lieferzeit : | 2 Arbeitstage |
---|
Feine U-Muttern SUS Serie (Material: SUS304)
FUJI SEIMITSU
Bearing lock nut developed by Fuji Seimitsu Co., Ltd., a pioneer of lock nuts with over 40 years of solid performance and trust.
ab∗ : | 14.31 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SUNCO
The friction ring is crimped and integrated with the nut, same as on the U Nut.
[Features]
· Lock nut for bearing.
· The spring action of the friction ring creates friction on the male screw to cause a locking effect.
· Can be fixed in an intermediate position.
· Since it is all metal, it has excellent heat resistance.
· No key groove processing on the shaft side.
[Shape] Round
[Material] SS400 equivalent / S45C equivalent / SUS304 equivalent
[Screw type] Metric coarse
[Nominal designation] M10 × 0.75 to M150 × 2.0
[Type]Lock nut
ab∗ : | 2.98 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
SUNCO
Uses both the top nut (convex type) and bottom nut (concave type).
The top nut is perfectly circular with respect to the bolt, but the bottom nut has been eccentrically machined off-center with respect to the bolt.
[Features] Since the lower nut is eccentric, tightening the upper nut will apply a lateral force due to the wedging action. Friction to this male thread prevents loosening.
· Can be manually tightened to your desired position.
· Can be used repeatedly.
· HLB is for bearings.
[Shape] Round
[Material] SS400/S45C
[Nominal of Thread] M15X1.0/M10X0.75/M12X1.0/M17X1.0/M20X1.0/M25X1.5/M30X1.5/M35X1.5/M40X1.5/M45X1.5/M50X1.5/M55X2.0/M60X2.0/M65X2.0/M70X2.0/M75X2.0/M80X2.0/M85X2.0/M90X2.0/M95X2.0/M100X2.0/M105X2.0/M110X2.0/M115X2.0/M120X2.0/M125X2.0/M130X2.0/M135X2.0/M140X2.0/M145X2.0/M150X2.0/M155X3.0/M160X3.0/M165X3.0/M170X3.0/M175X3.0/M180X3.0/M185X3.0/M190X3.0/M195X3.0/M200X3.0
[Type] Lock Nut
ab∗ : | 12.10 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SUNCO
[Shape] Round
[Nominal of Thread] M30X1.5
[Material] S45C
[Screw Type] Lock Nut
ab∗ : | 34.58 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Spezifikationen |
Ausführung |
Gewinde-Nenn-Ø M |
Modell |
Werkstoff |
Oberflächenbehandlung |
Mit Schraube |
| |||||||||||||||||||||||||||||||||||||||||||||
Warenzeichen | SNR | MISUMI | MISUMI | GANTER | FAG | MISUMI | MISUMI | GANTER | BGL | MISUMI | MISUMI | MISUMI | NTN | BGL | GANTER | REYHER | BGL | FUJI SEIMITSU | SKF | BGL | HARDLOCK INDUSTRY | FAG | AMF | AMF | FUJI SEIMITSU | FUJI SEIMITSU | FAG | HALDER | NTN | YOKOTA KIKOU | YOKOTA KIKOU | GANTER | BGL | BGL | SUNCO | FAG | BGL | BGL | BGL | BGL | NKE BEARINGS | FUJI SEIMITSU | SUNCO | SUNCO | SUNCO |
Artikelserie | Feine U-Muttern SC-Serie (Material: S45C [ausgehärtet]-äquivalent) | ||||||||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||
ab∗ | - | 12.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.46 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.95 € *Stückpreis Standardkonfiguration | 9.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.42 € *Stückpreis Standardkonfiguration Mengenrabatt | 38.93 € *Stückpreis Standardkonfiguration | 2.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.23 € *Stückpreis Standardkonfiguration | 4.85 € *Stückpreis Standardkonfiguration Mengenrabatt | - | 35.05 € *Stückpreis Standardkonfiguration | 7.76 € *Stückpreis Standardkonfiguration Mengenrabatt | 244.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.80 € *Stückpreis Standardkonfiguration | 34.70 € *Stückpreis Standardkonfiguration | 16.92 € *Stückpreis Standardkonfiguration Mengenrabatt | - Mengenrabatt | 246.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 45.60 € *Stückpreis Standardkonfiguration | 0.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.39 € *Stückpreis Standardkonfiguration | 17.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 1,242.47 € *Stückpreis Standardkonfiguration | 208.95 € *Stückpreis Standardkonfiguration | 12.02 € *Stückpreis Standardkonfiguration Mengenrabatt | 61.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.90 € *Stückpreis Standardkonfiguration | 0.93 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.12 € *Stückpreis Standardkonfiguration | 45.05 € *Stückpreis Standardkonfiguration | - | 14.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.98 € *Stückpreis Standardkonfiguration | 12.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.58 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | 2 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | Versand am selben Tag | 2 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 3 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 21 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 21 Arbeitstage | Versand am selben Tag | 21 Arbeitstage | 4 Arbeitstage | 2 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage |
Spezifikationen |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||
Ausführung | - | Sicherungsmuttern | Sicherungsmuttern / Sicherungsmuttern mit Zahnscheibe | - | - | Sicherungsmuttern | Sicherungsmuttern | - | Sicherungsmuttern | Werkzeug | Sicherungsmuttern | Sicherungsmuttern | Sicherungsmuttern | Sicherungsmuttern | - | Sicherungsmuttern | Sicherungsmuttern | Sicherungsmuttern | - | Sicherungsmuttern | Sicherungsmuttern | - | - | - | Sicherungsmuttern | Sicherungsmuttern | - | - | Zahnscheiben | Sicherungsmuttern | Zahnscheiben | - | - | Sicherungsmuttern | Sicherungsmuttern | - | Sicherungsmuttern | - | - | Sicherungsmuttern | - | Sicherungsmuttern | Sicherungsmuttern | Sicherungsmuttern | Sicherungsmuttern |
Gewinde-Nenn-Ø M | - | M8x0.75 ~ M60x2.0 | M10x0.75 ~ M50x1.5 | M 10 x 0,75 ~ M 60 x 2 | - | M3x0.35 ~ M50x1.5 | M8x0.75 ~ M50x1.5 | M 12 x 1,5 ~ M 40 x 1,5 | M10x0.75 ~ M200x3 | - | M10x0.75 ~ M50x1.5 | M5x0.5 ~ M30x3.5 | M10 ~ M190 | M 10x0.75 ~ Tr 330x5 | M 8 x 1 ~ M 60 x 1,5 | 10 x 0.75 ~ 170 x 3 | M10x0.75 ~ M100x2 | M10 ~ M95 | - | M20x1 ~ M200x3 | M10x0,75 ~ M120 × 2,0 | - | M6 ~ M24 | M6 ~ M24 | M15 ~ M50 | M10 ~ M95 | - | M20 | M10 ~ M150 | M10x0,75 ~ #NAME? | - | M 16 x 1,5 ~ M 60 x 1,5 | M50x1.5 ~ Tr1060x8 | 8.628"x8F ~ 12.562"x6F | M12 × 1,0 ~ M105 × 2,0 | - | 0.391"x32F ~ 7.847"x8F | - | - | M 25x1.5 ~ M 200x3 | - | M10 ~ M95 | M10x0,75 ~ M150 × 2,0 | M10x0,75 ~ M160 × 3,0 | M30X1,5 |
Modell | - | Runde Form | Runde Form | - | - | Quadratisch | Runde Form | - | Runde Form | - | Runde Form | Sechskant | Runde Form | Runde Form | - | Runde Form | Runde Form | Runde Form | - | Runde Form | Runde Form | - | - | - | Runde Form | Runde Form | - | - | Runde Form | Runde Form | Runde Form | - | Runde Form | Runde Form | Runde Form | - | Runde Form | Runde Form | Runde Form | Runde Form | - | Runde Form | Runde Form | Runde Form | Runde Form |
Werkstoff | Stahl | Stahl | Stahl / Rostfreier Stahl | - | - | Stahl / Rostfreier Stahl | Stahl / Rostfreier Stahl | - | - | Stahl | Stahl / Rostfreier Stahl | Stahl / Rostfreier Stahl | Stahl | - | - | Stahl | - | Stahl | Stahl | - | Stahl / Rostfreier Stahl | - | - | - | Stahl | Stahl | - | Stahl | Stahl | Stahl | Rostfreier Stahl | - | - | - | Stahl | - | - | - | - | - | Stahl | Rostfreier Stahl | Stahl / Rostfreier Stahl | Stahl | Stahl |
Oberflächenbehandlung | - | Mit Oberflächenbehandlung | ohne Oberflächen-behandlung | - | - | Mit Oberflächenbehandlung / ohne Oberflächen-behandlung | ohne Oberflächen-behandlung | - | n. z. | - | Mit Oberflächenbehandlung / ohne Oberflächen-behandlung | Mit Oberflächenbehandlung / ohne Oberflächen-behandlung | ohne Oberflächen-behandlung | Phosphatiert | - | ohne Oberflächen-behandlung | n. z. | ohne Oberflächen-behandlung | - | n. z. | Mit Oberflächenbehandlung / ohne Oberflächen-behandlung | - | - | - | Mit Oberflächenbehandlung | ohne Oberflächen-behandlung | - | - | Mit Oberflächenbehandlung | ohne Oberflächen-behandlung | ohne Oberflächen-behandlung | - | n. z. | n. z. | ohne Oberflächen-behandlung | - | n. z. | n. z. | n. z. | Phosphatiert | - | ohne Oberflächen-behandlung | ohne Oberflächen-behandlung | Mit Oberflächenbehandlung | Mit Oberflächenbehandlung |
Mit Schraube | - | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | - | - | Metrisches Gewinde (Regel-) / Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | - | - | - | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) / Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | - | - | - | - | Metrisches Gewinde (Fein-) | - | - | Metrisches Gewinde (Fein-) | - | - | - | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Fein-) | - | - | - | Metrisches Gewinde (Fein-) | - | - | - | - | Metrisches Gewinde (Regel-) | - | - | - | - | - | - | Metrisches Gewinde (Fein-) | Metrisches Gewinde (Regel-) | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.