Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
ab∗ : | 1.70 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 1.70 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Minimum Lieferzeit : | 7 Arbeitstage |
---|
KS SANGYO
Meets standard dimensions for D series (compliant with DIN 2098).
This is a cylindrical tensile coil spring with a wire that has been converted to the stainless steel used in springs.
ab∗ : | 15.87 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ACCURATE
Standard springs that are produced by accurate quality control.
These springs are controlled by measuring loading at two points: allowable load and independently established standard load—in addition to the required dimensions.
All products have lot numbers and full traceability.
ab∗ : | 0.56 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SHOWA SPRING
Standardized product made of piano wire or stainless steel wire for general-purpose cold moldingbr>
[Features]
· Standardized tensile coil spring made of piano wire (φ 0.32 mm to φ 2.3 mm in diameter) or stainless steel wire (φ 0.32 mm to φ 2.3 mm in diameter) for cold molding in general use.
· Piano wire: 180°C to 250°C Low temperature annealing, Black oxide finish surface.
· Stainless steel wire for spring: 250°C to 450°C Low temperature annealing. No surface treatment
ab∗ : | 4.95 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KS SANGYO
Spring compliant with Japan Spring Manufactures Association Standard (JSMA No.8-cylinder type tensile coil spring).
ab∗ : | 11.90 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
KS SANGYO
Cylindrical tension coil spring following the DIN 2098 standard, popular in Germany.
ab∗ : | 15.87 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TOKYO HATSUJYO MANUFACTURING
A round-wire coil spring that uses stainless steel wire (SUS304-WPB).
ab∗ : | 16.70 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SAMINI
· A general-purpose hanging and tension type buffer spring.
· Used to support a pipe (tube), a heavy cable, etc.
· Recommended as a buffer for other vibration-proof equipment and a pulling or mooring rope.
ab∗ : | 51.95 € |
---|---|
Minimum Lieferzeit : | 13 Arbeitstage |
*Stückpreis Standardkonfiguration
SHINSEI HATSUJHO
Frequently used in precision machinery, appliances, and chairs alongside compression springs.
ab∗ : | 6.83 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SHINSEI HATSUJHO
Pulling springs, as well as compression springs, are frequently used in precision machinery, appliances, and chairs alongside compression springs.
ab∗ : | 2.92 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SHINSEI HATSUJHO
Frequently used in precision machinery, appliances, and chairs alongside compression springs.
ab∗ : | 1.79 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TRUSCO NAKAYAMA
[Features]
● Tight-coiled with the spring wire under constant tension, with a hook formed at each end
● JIS B 2707 Class 2 tolerances for physical dimensions and spring properties
● Used for extension applications along tensile axis
ab∗ : | 17.41 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SHINSEI HATSUJHO
The compression spring as well pulling spring has been frequently used in precision machinery and appliances and chairs.
ab∗ : | 1.50 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
SAMINI
Lightweight (a specific gravity of 4.67, half that of steel) and highly corrosion resistant (superior to stainless steel).
[Features]
· Non-magnetic.
ab∗ : | 34.56 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 8.22 € |
---|---|
Minimum Lieferzeit : | 13 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Spezifikationen |
Werkstoff |
Ausführung |
Zulässige Last (konfigurierbare Bereich)(N) |
Haken gegenüber Winkel |
Zulässige Last P2(N) |
Länge L2 bei zulässiger Last(mm) |
Freie Länge Lf(mm) |
Spulenaußen-Ø OD(Ø) |
Anfangsspannung Pi(N) |
Federkonstante k(N/mm) |
Draht-Ø d(Ø) |
Gesamtzahl der Windungen N |
Max. Auslenkung(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Warenzeichen | MISUMI | MISUMI | MISUMI | KS SANGYO | ACCURATE | SHOWA SPRING | SAMINI | KS SANGYO | KS SANGYO | TOKYO HATSUJYO MANUFACTURING | SAMINI | SHINSEI HATSUJHO | SHINSEI HATSUJHO | SHINSEI HATSUJHO | TRUSCO NAKAYAMA | SHINSEI HATSUJHO | SAMINI | SAMINI |
Artikelserie | Zugfedern/Extra geringe Last/Geringe Last/Geringe bis mittlere Last/Mittlere Last | Runddraht Zugschraubenfeder (J Feder JB-Serie)【2-20 Stk. pro Packung】 | ||||||||||||||||
CAD |
|
|
|
|
|
|
|
| ||||||||||
ab∗ | 1.70 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.70 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | - | 15.87 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 0.56 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 4.95 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.59 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 11.90 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 15.87 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 16.70 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 51.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.83 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 2.92 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.79 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 17.41 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 1.50 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 34.56 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2022Mengenrabatt | 8.22 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | 7 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 13 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 13 Arbeitstage |
Spezifikationen |
|
|
| |||||||||||||||
Werkstoff | Edelstahldraht / Stahldraht | Edelstahldraht / Stahldraht | Edelstahldraht / Stahldraht | Edelstahldraht | Edelstahldraht / Stahldraht | Edelstahldraht / Stahldraht | Edelstahldraht / Stahldraht | Edelstahldraht | Edelstahldraht / Stahldraht | Edelstahldraht | Stahldraht | Stahldraht gehärtet | Stahldraht gehärtet | Edelstahldraht | Edelstahldraht | Stahldraht gehärtet | Titanlegierung | Stahldraht |
Ausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung | Standardausführung |
Zulässige Last (konfigurierbare Bereich)(N) | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | - | 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | Bis zu 1,25 / 1.26 bis 3.50 / 3.51 bis 8.00 / 8.01 bis 15.00 / 15.01 bis 30.00 / 30.01 bis 60.00 | 110.01 oder mehr | - | - | - | 1.26 bis 3.50 | - | 30.01 bis 60.00 / 60.01 bis 110.00 / 110.01 oder mehr | 60.01 bis 110.00 / 110.01 oder mehr |
Haken gegenüber Winkel | 180° (Standard) / 90° | 180° (Standard) / 90° | 180° (Standard) / 90° | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 90° | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 180° (Standard) | 90° |
Zulässige Last P2(N) | 0.69 ~ 225.55 | 6.47 ~ 430.51 | - | 3.761 ~ 162.917 | 0.16 ~ 203 | 1.16 ~ 158.02 | 0.84 ~ 181.7 | 0.539 ~ 90.36 | 0.147 ~ 215.6 | 0.64 ~ 13.73 | 506 ~ 4763 | - | - | - | 2.06 | - | 45 ~ 120 | 86.3 ~ 816 |
Länge L2 bei zulässiger Last(mm) | 13.5 ~ 342.5 | 12 ~ 241.2 | - | 11.8 ~ 770.3 | 3.7 ~ 782.9 | - | - | 11.6 ~ 340.2 | 3.7 ~ 830.6 | - | - | - | - | - | 140.3 | - | - | - |
Freie Länge Lf(mm) | 10 ~ 200 | 10 ~ 200 | - | 10.1 ~ 266.1 | 2.7 ~ 266.1 | 11 ~ 202 | 8 ~ 150 | 6.8 ~ 162.2 | 2.7 ~ 266.1 | 6.5 ~ 126.2 | 200 ~ 476 | 117 ~ 260 | 29.1 ~ 138.6 | 25 ~ 100 | 37.5 | 30 ~ 140 | 25 ~ 60 | 120 ~ 280 |
Spulenaußen-Ø OD(Ø) | 2 ~ 24 | 3 ~ 24 | 3 ~ 28 | 3 ~ 34.5 | 0.9 ~ 34.5 | 3.2 ~ 24 | 1.8 ~ 22 | 2 ~ 20 | 0.9 ~ 34.5 | 2 ~ 16 | 50 ~ 100 | 20 ~ 35 | 5 ~ 20 | 3.5 ~ 15 | 6.3 | 9 ~ 27 | 12 ~ 20 | 16 ~ 40 |
Anfangsspannung Pi(N) | 0.13 ~ 56.88 | 1.57 ~ 123.6 | 0.18 ~ 54.9 | 0.421 ~ 66.15 | 0.029 ~ 86.603 | 0.13 ~ 45.3 | 0.087 ~ 46.6 | 0.049 ~ 27.93 | 0.0294 ~ 86.544 | 0.04 ~ 8.26 | - | - | - | - | 0.245 | - | - | - |
Federkonstante k(N/mm) | 0.02 ~ 11.47 | 0.36 ~ 26.48 | 0.021 ~ 7.49 | 0.027 ~ 16.31 | 0.006 ~ 18.682 | 0.014 ~ 6.718 | 0.013 ~ 9.15 | 0.0069 ~ 3.234 | 0.0059 ~ 18.669 | 0.01 ~ 1.96 | 3.09 ~ 56.8 | - | - | - | 0.018 | - | 1.9 ~ 6.5 | 1.57 ~ 7.94 |
Draht-Ø d(Ø) | 0.2 ~ 3.2 | 0.45 ~ 4 | 0.3 ~ 3.5 | 0.5 ~ 2.5 | 0.1 ~ 2.5 | 0.32 ~ 2.3 | 0.18 ~ 2.9 | 0.2 ~ 2 | 0.1 ~ 2.5 | 0.2 ~ 1.6 | 4.5 ~ 13 | 2.6 ~ 4 | 0.5 ~ 2 | 0.5 ~ 2 | 0.4 | 1.2 ~ 4 | 1.6 ~ 2.5 | 1.6 ~ 5 |
Gesamtzahl der Windungen N | - | - | - | 10.5 ~ 79.5 | 10.5 ~ 79.5 | - | - | 15.5 ~ 62.5 | 10.5 ~ 79.5 | - | - | - | - | - | 62.5 | - | 3.5 ~ 11.5 | - |
Max. Auslenkung(mm) | 3.5 ~ 167.5 | 2 ~ 46.2 | - | - | 0.8 ~ 516.8 | 6 ~ 280.5 | 3 ~ 249 | - | - | - | 249 ~ 655 | - | - | - | 102.8 | - | - | 55.6 ~ 102 |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.