Druckfedern / UF, UR, UV, UY / Edelstahl / spiralförmig / Runddraht / 45% bezogen auf AD (Teilenummern - CAD Download)
- Mengenrabatt
Konfigurierbar in [Freie Länge] 1.25 - 44 mm, 0.92 - 39.6 mm, 5 - 80 mm / [Durchmesser]2 - 20 mm / [Federweg]2.25 - 60 mm / [Federkonstante]0.05 - 0.98 N/mm / [Last]0.15 - 35.3 N, bis zu 1.50 N, 1.51 - 50 N
Die Druckfedern von MISUMI sind mechanische Bauteile, welche hauptsächlich den Zweck haben, Druckkräfte aufzunehmen und sich zu komprimieren, wenn sie belastet werden. Im unbelasteten Zustand ist eine Anpassung der Länge von 0.92 mm bis hin zu 80 mm als Maximalwert möglich. Wählen Sie einen Durchmesser zwischen 2 mm und 20 mm für die Konfiguration der Druckfedern. Die maximale Belastung beträgt 0.15 bis 35.3 N, bis zu 1.50 N oder 1.51 bis 50 N. Im Bereich zwischen 0.05 und 0.98 N / mm liegt der Wert der Federkonstante. In Folge dessen bewältigen die Druckfedern einen Federweg zwischen 2.25 und 60 mm.
- Auf Lager
(i)Hinweis
- Bitte prüfen Sie den Inhalt auf unserer Website, da die PDF-Datei nicht die aktuellsten Informationen enthält.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
UF8-30
Spezifikationen
| Teilenummer |
| UY4-25 UR13-60 UF8-70 |
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UV3- | 5 | 0.15 | 1.1 | 3.5 | 0.18{0.018} | 70 | |
| 10 | 0.18 | 2.5 | 7 | 0.35{0.036} | |||
| 15 | 0.18 | 2.5 | 10.5 | 0.53{0.054} | |||
| 20 | 0.20 | 3.3 | 14 | 0.70{0.071} | |||
| 25 | 0.23 | 6.2 | 17.5 | 0.88{0.089} | |||
| 30 | 0.23 | 6.2 | 21 | 1.05{0.107} | |||
| UV4- | 5 | 0.18 | 1.2 | 3.5 | 0.18{0.018} | ||
| 10 | 0.20 | 1.7 | 7 | 0.35{0.036} | |||
| 15 | 0.23 | 3.0 | 10.5 | 0.53{0.054} | |||
| 20 | 0.23 | 3.0 | 14 | 0.70{0.071} | |||
| 25 | 0.26 | 4.9 | 17.5 | 0.88{0.089} | |||
| 30 | 0.26 | 4.9 | 21 | 1.05{0.107} | |||
| UV5- | 5 | 0.20 | 1.2 | 3.5 | 0.18{0.018} | ||
| 10 | 0.23 | 1.8 | 7 | 0.35{0.036} | |||
| 15 | 0.26 | 2.9 | 10.5 | 0.53{0.054} | |||
| 20 | 0.29 | 4.5 | 14 | 0.70{0.071} | |||
| 25 | 0.29 | 4.5 | 17.5 | 0.88{0.089} | |||
| 30 | 0.29 | 4.5 | 21 | 1.05{0.107} | |||
| UV6- | 10 | 0.26 | 2.0 | 7 | 0.35{0.036} | ||
| 15 | 0.30 | 3.3 | 10.5 | 0.53{0.054} | |||
| 20 | 0.30 | 3.3 | 14 | 0.70{0.071} | |||
| 25 | 0.35 | 6.5 | 17.5 | 0.88{0.089} | |||
| 30 | 0.35 | 6.5 | 21 | 1.05{0.107} | |||
| 35 | 0.35 | 6.5 | 24.5 | 1.23{0.125} | |||
| 40 | 0.35 | 6.5 | 28 | 1.40{0.143} | |||
| UV8- | 10 | 0.30 | 1.9 | 7 | 0.35{0.036} | ||
| 15 | 0.35 | 3.2 | 10.5 | 0.53{0.054} | |||
| 20 | 0.35 | 3.2 | 14 | 0.70{0.071} | |||
| 25 | 0.40 | 5.6 | 17.5 | 0.88{0.089} | |||
| 30 | 0.40 | 5.6 | 21 | 1.05{0.107} | |||
| 35 | 0.40 | 5.6 | 24.5 | 1.23{0.125} | |||
| 40 | 0.45 | 9.3 | 28 | 1.40{0.143} | |||
| 45 | 0.45 | 9.3 | 31.5 | 1.58{0.161} | |||
| 50 | 0.45 | 9.3 | 35 | 1.75{0.179} | |||
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UY2- | 5 | 0.13 | 1.5 | 3 | 0.15{0.015} | 60 | |
| 10 | 0.13 | 1.5 | 6 | 0.29{0.03} | |||
| 15 | 0.15 | 2.7 | 9 | 0.44{0.045} | |||
| 20 | 0.15 | 2.7 | 12 | 0.59{0.06} | |||
| 25 | 0.18 | 6.3 | 15 | 0.74{0.075} | |||
| 30 | 0.18 | 6.3 | 18 | 0.88{0.09} | |||
| UY3- | 5 | 0.16 | 0.92 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.2 | 2 | 7.5 | 0.74{0.075} | |||
| 15 | 0.23 | 3.45 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.23 | 3.45 | 15 | 1.47{0.15} | |||
| 25 | 0.26 | 6.24 | 15 | 1.47{0.15} | 60 | ||
| 30 | 0.26 | 6.24 | 18 | 1.77{0.18} | |||
| UY4- | 5 | 0.2 | 1.05 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.23 | 1.84 | 7.5 | 0.74{0.075} | |||
| 15 | 0.26 | 2.86 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.29 | 4.64 | 15 | 1.47{0.15} | |||
| 25 | 0.3 | 5.4 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.3 | 5.4 | 22.5 | 2.26{0.23} | |||
| UY5- | 5 | 0.23 | 1.15 | 3.75 | 0.37{0.0375} | 75 | |
| 10 | 0.26 | 1.82 | 7.5 | 0.74{0.075} | |||
| 15 | 0.3 | 3.15 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.3 | 3.15 | 15 | 1.47{0.15} | |||
| 25 | 0.32 | 4.16 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.32 | 4.16 | 22.5 | 2.26{0.23} | |||
| 35 | 0.35 | 6 | 26.25 | 2.55{0.26} | |||
| 40 | 0.35 | 6 | 30 | 2.94{0.3} | |||
| UY6- | 5 | 0.26 | 1.24 | 3.5 | 0.34{0.035} | 70 | |
| 10 | 0.3 | 2.1 | 7.5 | 0.74{0.075} | 75 | ||
| 15 | 0.32 | 2.64 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.35 | 3.85 | 15 | 1.47{0.15} | |||
| 25 | 0.38 | 5.32 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.4 | 6.8 | 22.5 | 2.21{0.225} | |||
| 35 | 0.4 | 6.8 | 26.25 | 2.55{0.26} | |||
| 40 | 0.4 | 6.8 | 30 | 2.94{0.3} | |||
| UY8- | 10 | 0.35 | 2.19 | 7.5 | 0.74{0.075} | 75 | |
| 15 | 0.4 | 3.4 | 11.25 | 1.10{0.1125} | |||
| 20 | 0.4 | 3.4 | 15 | 1.47{0.15} | |||
| 25 | 0.45 | 5.4 | 18.75 | 1.84{0.1875} | |||
| 30 | 0.45 | 5.4 | 22.5 | 2.21{0.225} | |||
| 35 | 0.5 | 8.3 | 26.25 | 2.55{0.26} | |||
| 40 | 0.5 | 8.3 | 30 | 2.94{0.3} | |||
| 45 | 0.5 | 8.3 | 33.75 | 3.33{0.34} | |||
| 50 | 0.55 | 12.7 | 35 | 3.43{0.35} | 70 | ||
| UY10- | 10 | 0.5 | 3.25 | 6 | 1.18{0.12} | 60 | |
| 15 | 0.5 | 3.25 | 11.25 | 2.21{0.225} | 75 | ||
| 20 | 0.55 | 4.4 | 15 | 2.94{0.3} | |||
| 25 | 0.55 | 4.4 | 18.75 | 3.68{0.375} | |||
| 30 | 0.6 | 6.15 | 22.5 | 4.41{0.45} | |||
| 35 | 0.6 | 6.3 | 26.25 | 5.10{0.52} | |||
| 40 | 0.6 | 6.3 | 30 | 5.88{0.6} | |||
| 45 | 0.65 | 8.45 | 33.75 | 6.62{0.675} | |||
| 50 | 0.65 | 8.45 | 37.5 | 7.35{0.75} | |||
| UY12- | 15 | 0.55 | 3.3 | 11.25 | 2.206{0.225} | 75 | |
| 20 | 0.55 | 3.3 | 15 | 2.942{0.3} | |||
| 25 | 0.6 | 4.2 | 18.75 | 3.68{0.375} | |||
| 30 | 0.65 | 5.53 | 22.5 | 4.41{0.45} | |||
| 35 | 0.65 | 5.53 | 26.25 | 5.15{0.525} | |||
| 40 | 0.7 | 7.35 | 30 | 5.88{0.6} | |||
| 45 | 0.7 | 7.35 | 33.75 | 6.62{0.675} | |||
| 50 | 0.7 | 7.35 | 37.5 | 7.35{0.75} | |||
| 60 | 0.8 | 13.6 | 45 | 8.83{0.9} | |||
| 70 | 0.8 | 13.6 | 52.5 | 10.30{1.05} | |||
| 80 | 0.8 | 13.6 | 60 | 11.77{1.2} | |||
| UY13- | 15 | 0.6 | 3.75 | 10.5 | 2.06{0.21} | 70 | |
| 20 | 0.6 | 3.75 | 15 | 2.94{0.3} | 75 | ||
| 25 | 0.65 | 4.9 | 18.75 | 3.68{0.375} | |||
| 30 | 0.65 | 4.9 | 22.5 | 4.41{0.45} | |||
| 35 | 0.7 | 6.3 | 26.25 | 5.15{0.525} | |||
| 40 | 0.75 | 8.25 | 30 | 5.88{0.6} | |||
| 45 | 0.75 | 8.25 | 33.75 | 6.62{0.675} | |||
| 50 | 0.8 | 11.2 | 37.5 | 7.35{0.75} | |||
| 60 | 0.8 | 11.2 | 45 | 8.83{0.9} | |||
| 70 | 0.85 | 14.45 | 52.5 | 10.30{1.05} | |||
| 80 | 0.85 | 14.45 | 60 | 11.77{1.2} | |||
| UY16- | 15 | 0.7 | 4.2 | 9 | 1.77{0.18} | 60 | |
| 20 | 0.7 | 4.2 | 15 | 2.94{0.3} | 75 | ||
| 25 | 0.7 | 4.2 | 18.75 | 3.68{0.375} | |||
| 30 | 0.75 | 5.44 | 22.5 | 4.41{0.45} | |||
| 35 | 0.8 | 6.8 | 26.25 | 5.15{0.525} | |||
| 40 | 0.8 | 6.8 | 30 | 5.88{0.6} | |||
| 45 | 0.85 | 8.5 | 33.75 | 6.62{0.675} | |||
| 50 | 0.9 | 10.8 | 37.5 | 7.35{0.75} | |||
| 60 | 0.9 | 10.8 | 45 | 8.83{0.9} | |||
| 70 | 1 | 17 | 52.5 | 10.30{1.05} | |||
| 80 | 1 | 17 | 60 | 11.77{1.2} | |||
| UY20- | 20 | 0.9 | 5.4 | 12 | 3.53{0.36} | 60 | |
| 25 | 0.9 | 5.4 | 18.75 | 5.49{0.56} | 75 | ||
| 30 | 0.9 | 5.4 | 22.5 | 6.62{0.675} | |||
| 35 | 1 | 7.5 | 26.25 | 7.65{0.78} | |||
| 40 | 1 | 7.5 | 30 | 8.83{0.9} | |||
| 45 | 1 | 7.5 | 33.75 | 9.90{1.01} | |||
| 50 | 1.1 | 11 | 37.5 | 11.03{1.125} | |||
| 60 | 1.1 | 11 | 45 | 13.24{1.35} | |||
| 70 | 1.2 | 15.6 | 52.5 | 15.45{1.58} | |||
| 80 | 1.2 | 15.6 | 60 | 17.65{1.8} | |||
■UR: Fmax. (Zulässige Auslenkung) =LxFa%
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Fa% | Stückpreis | |
| Ausführung D-L | |||||||
| UR2- | 5 | 0.18 | 2.0 | 2.5 | 0.49{0.05} | 50 | |
| 10 | 0.18 | 2.0 | 5 | 0.98{0.1} | |||
| 15 | 0.23 | 6.0 | 7.5 | 1.5{0.15} | |||
| 20 | 0.23 | 6.0 | 10 | 2.0{0.2} | |||
| 25 | 0.26 | 11.2 | 12.5 | 2.5{0.25} | |||
| 30 | 0.26 | 11.2 | 15 | 2.9{0.3} | |||
| UR3- | 5 | 0.23 | 1.6 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.25 | 2.1 | 6 | 1.8{0.18} | |||
| 15 | 0.3 | 4.5 | 9 | 2.6{0.27} | |||
| 20 | 0.3 | 4.5 | 12 | 3.5{0.36} | |||
| 25 | 0.32 | 6.4 | 15 | 4.4{0.45} | |||
| 30 | 0.32 | 6.4 | 18 | 5.3{0.54} | |||
| 35 | 0.35 | 9.8 | 21 | 6.2{0.63} | |||
| 40 | 0.35 | 9.8 | 24 | 7.1{0.72} | |||
| UR4- | 5 | 0.26 | 1.4 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.29 | 2 | 6 | 1.8{0.18} | |||
| 15 | 0.32 | 3 | 9 | 2.6{0.27} | |||
| 20 | 0.38 | 6.1 | 12 | 3.5{0.36} | |||
| 25 | 0.38 | 6.1 | 15 | 4.4{0.45} | |||
| 30 | 0.40 | 8 | 18 | 5.3{0.54} | |||
| 35 | 0.40 | 8 | 21 | 6.2{0.63} | |||
| 40 | 0.45 | 14.4 | 24 | 7.1{0.72} | |||
| 45 | 0.45 | 14.4 | 27 | 7.9{0.81} | |||
| 50 | 0.45 | 14.4 | 30 | 8.8{0.9} | |||
| 60 | 0.5 | 23 | 36 | 10.6{1.08} | |||
| UR5- | 5 | 0.3 | 1.65 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.35 | 2.71 | 6 | 1.8{0.18} | |||
| 15 | 0.38 | 3.61 | 9 | 2.6{0.27} | |||
| 20 | 0.38 | 3.61 | 12 | 3.5{0.36} | |||
| 25 | 0.45 | 7.43 | 15 | 4.4{0.45} | |||
| 30 | 0.45 | 7.43 | 18 | 5.3{0.54} | |||
| 35 | 0.5 | 12.25 | 21 | 6.2{0.63} | |||
| 40 | 0.5 | 12.25 | 24 | 7.1{0.72} | |||
| 45 | 0.5 | 12.25 | 27 | 7.9{0.81} | |||
| 50 | 0.55 | 19.53 | 30 | 8.8{0.9} | |||
| 60 | 0.55 | 19.53 | 36 | 10.6{1.08} | |||
| UR6- | 5 | 0.32 | 1.5 | 3 | 0.9{0.09} | 60 | |
| 10 | 0.4 | 3 | 6 | 1.8{0.18} | |||
| 15 | 0.4 | 3 | 9 | 2.6{0.27} | |||
| 20 | 0.5 | 7 | 12 | 3.5{0.36} | |||
| 25 | 0.5 | 7 | 15 | 4.4{0.45} | |||
| 30 | 0.5 | 7 | 18 | 5.3{0.54} | |||
| 35 | 0.55 | 11 | 21 | 6.2{0.63} | |||
| 40 | 0.55 | 11 | 24 | 7.1{0.72} | |||
| 45 | 0.6 | 17.4 | 27 | 7.9{0.81} | |||
| 50 | 0.6 | 17.4 | 30 | 8.8{0.9} | |||
| 60 | 0.65 | 23.4 | 36 | 10.6{1.08} | |||
| 70 | 0.65 | 23.4 | 42 | 12.4{1.26} | |||
| UR8- | 10 | 0.45 | 2.6 | 6 | 1.8{0.18} | 60 | |
| 15 | 0.5 | 3.6 | 9 | 2.6{0.27} | |||
| 20 | 0.5 | 3.6 | 12 | 3.5{0.36} | |||
| 25 | 0.55 | 5.9 | 15 | 4.4{0.45} | |||
| 30 | 0.65 | 10.4 | 18 | 5.3{0.54} | |||
| 35 | 0.65 | 10.4 | 21 | 6.2{0.63} | |||
| 40 | 0.7 | 15.4 | 24 | 7.1{0.72} | |||
| 45 | 0.75 | 21 | 22 | 6.3{0.66} | 50 | ||
| 50 | 0.75 | 21 | 27 | 7.8{0.81} | 55 | ||
| 60 | 0.8 | 27.6 | 31 | 8.9{0.93} | 52 | ||
| 70 | 0.8 | 27.6 | 39.9 | 11.6{1.20} | 57 | ||
| 80 | 0.8 | 27.6 | 48 | 14.1{1.44} | 60 | ||
| UR10- | 10 | 0.55 | 3.3 | 6 | 1.8{0.18} | 60 | |
| 15 | 0.6 | 4.2 | 9 | 2.6{0.27} | |||
| 20 | 0.65 | 6.2 | 12 | 3.5{0.36} | |||
| 25 | 0.65 | 6.2 | 15 | 4.4{0.45} | |||
| 30 | 0.7 | 8.4 | 18 | 5.3{0.54} | |||
| 35 | 0.7 | 8.4 | 21 | 6.2{0.63} | |||
| 40 | 0.7 | 8.4 | 24 | 7.1{0.72} | |||
| 45 | 0.8 | 15.2 | 27 | 7.9{0.81} | |||
| 50 | 0.8 | 15.2 | 30 | 8.8{0.9} | |||
| 60 | 0.85 | 20.4 | 36 | 10.6{1.08} | |||
| 70 | 0.85 | 20.4 | 42 | 12.4{1.26} | |||
| 80 | 0.85 | 20.4 | 48 | 14.1{1.44} | |||
| UR12- | 15 | 0.6 | 3.5 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.7 | 5.6 | 12 | 3.5{0.36} | |||
| 25 | 0.7 | 5.6 | 15 | 4.4{0.45} | |||
| 30 | 0.8 | 9.6 | 18 | 5.3{0.54} | |||
| 35 | 0.8 | 9.6 | 21 | 6.2{0.63} | |||
| 40 | 0.8 | 9.6 | 24 | 7.1{0.72} | |||
| 45 | 0.9 | 16.2 | 27 | 7.9{0.81} | |||
| 50 | 0.9 | 16.2 | 30 | 8.8{0.9} | |||
| 60 | 0.9 | 16.2 | 36 | 10.6{1.08} | |||
| 70 | 1 | 26 | 42 | 12.4{1.26} | |||
| 80 | 1 | 26 | 48 | 14.1{1.44} | |||
| UR13- | 15 | 0.7 | 4.7 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.7 | 4.7 | 12 | 3.5{0.36} | |||
| 25 | 0.8 | 8 | 15 | 4.4{0.45} | |||
| 30 | 0.8 | 8 | 18 | 5.3{0.54} | |||
| 35 | 0.8 | 8 | 21 | 6.2{0.63} | |||
| 40 | 0.9 | 12.8 | 24 | 7.1{0.72} | |||
| 45 | 0.9 | 12.8 | 27 | 7.9{0.81} | |||
| 50 | 0.9 | 12.8 | 30 | 8.8{0.9} | |||
| 60 | 1.0 | 21 | 36 | 10.6{1.08} | |||
| 70 | 1.0 | 21 | 42 | 12.4{1.26} | |||
| 80 | 1.0 | 21 | 48 | 14.1{1.44} | |||
| UR16- | 15 | 0.75 | 4.3 | 9 | 2.6{0.27} | 60 | |
| 20 | 0.8 | 5.4 | 12 | 3.5{0.36} | |||
| 25 | 0.9 | 7.7 | 15 | 4.4{0.45} | |||
| 30 | 0.9 | 7.7 | 18 | 5.3{0.54} | |||
| 35 | 1.0 | 12 | 21 | 6.2{0.63} | |||
| 40 | 1.0 | 12 | 24 | 7.1{0.72} | |||
| 45 | 1.0 | 12 | 27 | 7.9{0.81} | |||
| 50 | 1.1 | 19 | 30 | 8.8{0.9} | |||
| 60 | 1.1 | 19 | 36 | 10.6{1.08} | |||
| 70 | 1.2 | 26.4 | 42 | 12.4{1.26} | |||
| 80 | 1.2 | 26.4 | 48 | 14.1{1.44} | |||
| UR20- | 20 | 1.0 | 6 | 12 | 5.9{0.6} | 60 | |
| 25 | 1.1 | 7.7 | 15 | 7.4{0.75} | |||
| 30 | 1.1 | 7.7 | 18 | 8.8{0.9} | |||
| 35 | 1.2 | 10.8 | 21 | 10.3{1.05} | |||
| 40 | 1.2 | 10.8 | 24 | 11.8{1.2} | |||
| 45 | 1.3 | 14.3 | 27 | 13.2{1.35} | |||
| 50 | 1.3 | 14.3 | 30 | 14.7{1.5} | |||
| 60 | 1.4 | 19.6 | 36 | 17.7{1.8} | |||
| 70 | 1.4 | 19.6 | 42 | 20.6{2.1} | |||
| 80 | 1.5 | 27 | 48 | 23.5{2.4} | |||
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
■UF: Fmax. (Zulässige Auslenkung) =Lx45%
| Teilenummer | d | Feste Länge | F max. | N{kgf}max. | Stückpreis | |
| Ausführung D-L | ||||||
| UF 2- | 5* | 0.2 | 2.35 | 2.25 | 0.66 {0.068} | |
| 10* | 0.2 | 2.35 | 4.5 | 1.3 {0.14} | ||
| 15* | 0.26 | 7.8 | 6.7 | 2.0 {0.20} | ||
| 20* | 0.26 | 7.8 | 9 | 2.7 {0.27} | ||
| 25* | 0.29 | 13.6 | 11.2 | 3.3 {0.34} | ||
| 30* | 0.29 | 13.6 | 13.5 | 4.0 {0.41} | ||
| UF 3- | 5* | 0.26 | 1.8 | 2.25 | 1.1{0.11} | |
| 10* | 0.32 | 4.5 | 4.5 | 2.2{0.22} | ||
| 15* | 0.32 | 4.5 | 6.7 | 3.2{0.33} | ||
| 20* | 0.35 | 6.3 | 9 | 4.4{0.45} | ||
| 25* | 0.35 | 6.3 | 11.2 | 5.5{0.56} | ||
| 30* | 0.4 | 12.4 | 13.5 | 6.6{0.67} | ||
| 35* | 0.4 | 12.4 | 15.7 | 7.6{0.78} | ||
| 40* | 0.4 | 12.4 | 18 | 8.8{0.9} | ||
| UF 4- | 5* | 0.32 | 2 | 2.25 | 1.1{0.11} | |
| 10* | 0.35 | 3 | 4.5 | 2.2{0.22} | ||
| 15* | 0.4 | 5.2 | 6.7 | 3.2{0.33} | ||
| 20* | 0.4 | 5.2 | 9 | 4.4{0.45} | ||
| 25* | 0.45 | 9.5 | 11.2 | 5.5{0.56} | ||
| 30* | 0.45 | 9.5 | 13.5 | 6.6{0.67} | ||
| 35* | 0.5 | 15.5 | 15.7 | 7.6{0.78} | ||
| 40* | 0.5 | 15.5 | 18 | 8.8{0.9} | ||
| 45* | 0.5 | 15.5 | 20 | 9.8{1} | ||
| 50* | 0.5 | 15.5 | 22.5 | 10.8{1.1} | ||
| 60* | 0.55 | 22.6 | 27 | 12.7{1.3} | ||
| UF 5- | 5* | 0.35 | 2.01 | 2.25 | 1.1{0.11} | |
| 10* | 0.4 | 3.2 | 4.5 | 2.2{0.23} | ||
| 15* | 0.4 | 3.2 | 6.75 | 3.3{0.34} | ||
| 20* | 0.45 | 4.95 | 9 | 4.4{0.45} | ||
| 25* | 0.45 | 4.95 | 11.25 | 5.5{0.56} | ||
| 30* | 0.5 | 7.75 | 13.5 | 6.7{0.68} | ||
| 35* | 0.5 | 7.75 | 15.75 | 7.7{0.79} | ||
| 40 | 0.6 | 19.5 | 18 | 8.8{0.9} | ||
| 45 | 0.6 | 19.5 | 20.25 | 10{1.01} | ||
| 50 | 0.6 | 19.5 | 22.5 | 11.2{1.13} | ||
| 60 | 0.65 | 27.95 | 27 | 13.4{1.35} | ||
| UF 6- | 5* | 0.4 | 2.2 | 2.25 | 1.1{0.11} | |
| 10* | 0.5 | 5 | 4.5 | 2.2{0.22} | ||
| 15* | 0.55 | 7.7 | 6.7 | 3.2{0.33} | ||
| 20* | 0.55 | 7.7 | 9 | 4.4{0.45} | ||
| 25 | 0.6 | 10.8 | 11.2 | 5.5{0.56} | ||
| 30 | 0.65 | 15.6 | 13.5 | 6.6{0.67} | ||
| 35 | 0.65 | 15.6 | 15.7 | 7.6{0.78} | ||
| 40 | 0.65 | 15.6 | 18 | 8.8{0.9} | ||
| 45 | 0.65 | 15.6 | 20 | 9.8{1} | ||
| 50 | 0.7 | 23.1 | 22.5 | 10.8{1.1} | ||
| 60 | 0.7 | 23.1 | 27 | 12.7{1.3} | ||
| 70 | 0.75 | 30.8 | 31.5 | 14.7{1.5} | ||
| UF 8- | 10 | 0.6 | 5.4 | 4.5 | 2.2{0.22} | |
| 15 | 0.65 | 7.2 | 6.7 | 3.2{0.33} | ||
| 20 | 0.7 | 10.5 | 9 | 4.4{0.45} | ||
| 25 | 0.7 | 10.5 | 11.2 | 5.5{0.56} | ||
| 30 | 0.75 | 13.5 | 13.5 | 6.6{0.67} | ||
| 35 | 0.75 | 13.5 | 15.7 | 7.6{0.78} | ||
| 40 | 0.8 | 18.4 | 18 | 8.8{0.9} | ||
| 45 | 0.8 | 18.4 | 20 | 9.8{1} | ||
| 50 | 0.8 | 18.4 | 22.5 | 10.8{1.1} | ||
| 60 | 0.85 | 26.4 | 27 | 12.7{1.3} | ||
| 70 | 0.85 | 26.4 | 31.5 | 14.7{1.5} | ||
| 80 | 0.85 | 26.4 | 36 | 17.7{1.8} | ||
| UF10- | 10 | 0.65 | 4.6 | 4.5 | 2.2{0.22} | |
| 15 | 0.65 | 4.6 | 6.7 | 3.2{0.33} | ||
| 20 | 0.8 | 9.6 | 9 | 4.4{0.45} | ||
| 25 | 0.8 | 9.6 | 11.2 | 5.5{0.56} | ||
| 30 | 0.85 | 12.8 | 13.5 | 6.6{0.67} | ||
| 35 | 0.85 | 12.8 | 15.7 | 7.6{0.78} | ||
| 40 | 0.9 | 17 | 18 | 8.8{0.9} | ||
| 45 | 0.9 | 17 | 20 | 9.8{1} | ||
| 50 | 0.9 | 17 | 22.5 | 10.8{1.1} | ||
| 60 | 1.0 | 28 | 27 | 12.7{1.3} | ||
| 70 | 1.0 | 28 | 31.5 | 14.7{1.5} | ||
| 80 | 1.0 | 28 | 36 | 17.7{1.8} | ||
| UF12- | 15 | 0.8 | 6.8 | 6.7 | 3.2{0.33} | |
| 20 | 0.8 | 6.8 | 9 | 4.4{0.45} | ||
| 25 | 0.8 | 6.8 | 11.2 | 5.5{0.56} | ||
| 30 | 0.9 | 10.8 | 13.5 | 6.6{0.67} | ||
| 35 | 1.0 | 17 | 15.7 | 7.6{0.78} | ||
| 40 | 1.0 | 17 | 18 | 8.8{0.9} | ||
| 45 | 1.0 | 17 | 20 | 9.8{1} | ||
| 50 | 1.1 | 26.4 | 22.5 | 10.8{1.1} | ||
| 60 | 1.1 | 26.4 | 27 | 12.7{1.3} | ||
| 70 | 1.1 | 26.4 | 31.5 | 14.7{1.5} | ||
| 80 | 1.2 | 39.6 | 36 | 17.7{1.8} | ||
| UF13- | 15 | 0.8 | 5.6 | 6.7 | 3.2{0.33} | |
| 20 | 0.8 | 5.6 | 9 | 4.4{0.45} | ||
| 25 | 0.85 | 7.2 | 11.2 | 5.5{0.56} | ||
| 30 | 1.0 | 14 | 13.5 | 6.6{0.67} | ||
| 35 | 1.0 | 14 | 15.7 | 7.6{0.78} | ||
| 40 | 1.0 | 14 | 18 | 8.8{0.9} | ||
| 45 | 1.1 | 21.5 | 20 | 9.8{1} | ||
| 50 | 1.1 | 21.5 | 22.5 | 10.8{1.1} | ||
| 60 | 1.1 | 21.5 | 27 | 12.7{1.3} | ||
| 70 | 1.2 | 30 | 31.5 | 14.7{1.5} | ||
| 80 | 1.2 | 30 | 36 | 17.7{1.8} | ||
| UF16- | 15 | 0.9 | 5.6 | 6.7 | 3.2{0.33} | |
| 20 | 1.0 | 7.7 | 9 | 4.4{0.45} | ||
| 25 | 1.0 | 7.7 | 11.2 | 5.5{0.56} | ||
| 30 | 1.1 | 12.1 | 13.5 | 6.6{0.67} | ||
| 35 | 1.1 | 12.1 | 15.7 | 7.6{0.78} | ||
| 40 | 1.2 | 18 | 18 | 8.8{0.9} | ||
| 45 | 1.2 | 18 | 20 | 9.8{1} | ||
| 50 | 1.2 | 18 | 22.5 | 10.8{1.1} | ||
| 60 | 1.3 | 26 | 27 | 12.7{1.3} | ||
| 70 | 1.3 | 26 | 31.5 | 14.7{1.5} | ||
| 80 | 1.4 | 35 | 36 | 17.7{1.8} | ||
| UF20- | 20 | 1.2 | 7.2 | 9 | 8.8{0.9} | |
| 25 | 1.3 | 9.1 | 11.25 | 11.1{1.13} | ||
| 30 | 1.4 | 11.9 | 13.5 | 13.2{1.35} | ||
| 35 | 1.4 | 11.9 | 15.75 | 15.5{1.58} | ||
| 40 | 1.5 | 15.8 | 18 | 17.7{1.8} | ||
| 45 | 1.5 | 15.8 | 20.25 | 19.9{2.03} | ||
| 50 | 1.6 | 20.8 | 22.5 | 22.1{2.25} | ||
| 60 | 1.6 | 20.8 | 27 | 26.5{2.7} | ||
| 70 | 1.7 | 26.4 | 31.5 | 30.9{3.15} | ||
| 80 | 1.7 | 26.4 | 36 | 35.3{3.6} | ||
{kgf}=Nx0.101972
Beide Enden der mit * gekennzeichneten Ausführungen UF sind nicht geschliffen.
Die Werte für feste Länge sind nur Referenzwerte.
Je nach Charge können diese leicht variieren.
Gebrauchshäufigkeit: 1 Million Mal
D12 ist nur für Ausführung UY, UR, UF, UL und UBB verfügbar. D14 ist nur für Ausführung UBB möglich.
| Ausführung | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | |||||||||||||||||||
| D | ||||||||||||||||||||||||||||
| 2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | ||||||||||||||||||||||||
| 3 | N/mm 0.05 {kgf/mm}{0.005} | N/mm 0.098 {kgf/mm}{0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | 1.5{0.15} | ||||||||||||||||||||||
| 4 | 2.0 {0.2} | 2.9{0.3} | 4.9{0.5} | |||||||||||||||||||||||||
| 5 | N/mm 2.0 {kgf/mm} {0.2} | |||||||||||||||||||||||||||
| 6 | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | |||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||
| 10 | N/mm 0.2 {kgf/mm} {0.02} | |||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||
| 13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | ||||||||||||||||||||||||||
| 14 | ||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||
| 20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | ||||||||||||||||||||
| Fmax. | F=Lx70% | F = L × 75% | F=Lx60% | F = L × 45% | F=Lx40% | F=Lx40% | F = L × 35% | F = L × 30% | F = L × 25% | |||||||||||||||||||
Teilenummer:
- Um die 3D Vorschau anzeigen zu können, muss die Konfiguration abgeschlossen sein.
3D Vorschau nicht verfügbar, da noch keine Teilenummer generiert wurde.
Teilenummer
|
|---|
| UF8-30 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Zulässige Auslenkung (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.54 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 6.6 | 16.5 | 30 | 8 | 0.49 | 0.75 | 13.5 | 13.5 |
Loading...
Grundlegende Informationen
| Werkstoff | EN 1.4301 (WPB) Äquiv. |
|---|
Sie befinden sich auf der Seite für Druckfedern / UF, UR, UV, UY / Edelstahl / spiralförmig / Runddraht / 45% bezogen auf AD, die Teilenummer ist UF8-30.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer UF8-30.
Konfigurieren
Basiseigenschaften
-
Ausführung
- UF
- UR
- UV
- UY
-
Zulässige Last (konfigurierbare Bereich)(N)
- Bis zu 1,50
- 1.51 bis 4.50
- 4.51 bis 8.50
- 8.51 bis 16.00
- 16.01 bis 30.00
- 30.01 bis 50.00
-
Enden, Oberflächenstatus
- Geerdet
- Nicht geerdet
-
Maximallast(N)
- 0.15
- 0.18
- 0.29
- 0.34
- 0.35
- 0.37
- 0.44
- 0.49
- 0.53
- 0.59
- 0.66
- 0.7
- 0.74
- 0.88
- 0.9
- 0.98
- 1.05
- 1.1
- 1.18
- 1.23
- 1.3
- 1.4
- 1.47
- 1.5
- 1.58
- 1.75
- 1.77
- 1.8
- 1.84
- 2
- 2.06
- 2.2
- 2.206
- 2.21
- 2.26
- 2.5
- 2.55
- 2.6
- 2.7
- 2.9
- 2.94
- 2.942
- 3.2
- 3.3
- 3.33
- 3.43
- 3.5
- 3.53
- 3.68
- 4
- 4.4
- 4.41
- 5.1
- 5.15
- 5.3
- 5.49
- 5.5
- 5.88
- 5.9
- 6.2
- 6.3
- 6.6
- 6.62
- 6.7
- 7.1
- 7.35
- 7.4
- 7.6
- 7.65
- 7.7
- 7.8
- 7.9
- 8.8
- 8.83
- 8.9
- 9.8
- 9.9
- 10
- 10.3
- 10.6
- 10.8
- 11.03
- 11.1
- 11.2
- 11.6
- 11.77
- 11.8
- 12.4
- 12.7
- 13.2
- 13.24
- 13.4
- 14.1
- 14.7
- 15.45
- 15.5
- 17.7
- 19.9
- 20.6
- 22.1
- 23.5
- 26.5
- 30.9
- 35.3
-
Höhe nach eingesetzter max. Last L-F(mm)
-
Freie Länge L(mm)
-
Außen-Ø D (oder D1)(mm)
-
Federkonstante(N/mm)
-
Draht-Ø(mm)
-
Feste Länge(mm)
- 0.92
- 1.05
- 1.1
- 1.15
- 1.2
- 1.24
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.82
- 1.84
- 1.9
- 2
- 2.01
- 2.1
- 2.19
- 2.2
- 2.35
- 2.5
- 2.6
- 2.64
- 2.7
- 2.71
- 2.9
- 3
- 3.15
- 3.2
- 3.25
- 3.3
- 3.4
- 3.45
- 3.5
- 3.6
- 3.61
- 3.75
- 3.85
- 4.16
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.64
- 4.7
- 4.9
- 4.95
- 5
- 5.2
- 5.32
- 5.4
- 5.44
- 5.53
- 5.6
- 6
- 6.1
- 6.15
- 6.2
- 6.24
- 6.3
- 6.4
- 6.5
- 6.8
- 7
- 7.2
- 7.35
- 7.43
- 7.5
- 7.7
- 7.75
- 7.8
- 8
- 8.25
- 8.3
- 8.4
- 8.45
- 8.5
- 9.1
- 9.3
- 9.5
- 9.6
- 9.8
- 10.4
- 10.5
- 10.8
- 11
- 11.2
- 11.9
- 12
- 12.1
- 12.25
- 12.4
- 12.7
- 12.8
- 13.5
- 13.6
- 14
- 14.3
- 14.4
- 14.45
- 15.2
- 15.4
- 15.5
- 15.6
- 15.8
- 16.2
- 17
- 17.4
- 18
- 18.4
- 19
- 19.5
- 19.53
- 19.6
- 20.4
- 20.8
- 21
- 21.5
- 22.6
- 23
- 23.1
- 23.4
- 26
- 26.4
- 27
- 27.6
- 27.95
- 28
- 30
- 30.8
- 35
- 39.6
-
Filtern nach CAD Format
- 2D
- 3D
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Produktvarianten
| Teilenummer |
|---|
| UF10-25 |
| UF10-30 |
| UF10-35 |
| UF8-35 |
| UF8-40 |
| UF8-45 |
| Teilenummer | Standard-Stückpreis | Mindestbestellmenge | Mengenrabatt | Reguläre Versanddauer ? | RoHS | Zulässige Last (konfigurierbare Bereich) (N) | Enden, Oberflächenstatus | Maximallast (N) | Höhe nach eingesetzter max. Last L-F (mm) | Freie Länge L (mm) | Außen-Ø D (oder D1) (mm) | Federkonstante (N/mm) | Draht-Ø (mm) | Feste Länge (mm) | Zulässige Auslenkung (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.62 € | 1 | Verfügbar | 5 Arbeitstage | 10 | - | - | - | - | - | - | - | - | - | - | |
1.62 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 6.6 | 16.5 | 30 | 10 | 0.49 | 0.85 | 12.8 | 13.5 | |
1.62 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 4.51 bis 8.50 | Geerdet | 7.6 | 19.3 | 35 | 10 | 0.49 | 0.85 | 12.8 | 15.7 | |
1.54 € | 1 | Verfügbar |
Versand am selben Tag
Auf Lager | 10 | 4.51 bis 8.50 | Geerdet | 7.6 | 19.3 | 35 | 8 | 0.49 | 0.75 | 13.5 | 15.7 | |
1.54 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 8.51 bis 16.00 | Geerdet | 8.8 | 22 | 40 | 8 | 0.49 | 0.8 | 18.4 | 18 | |
1.54 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 8.51 bis 16.00 | Geerdet | 9.8 | 25 | 45 | 8 | 0.49 | 0.8 | 18.4 | 20 |
Ergänzungsartikel
-
Halter für Zugfedern / Schlüsselflächen / Mit Kerbe
MISUMI Standardpreis 4.94 € Lieferzeit: Versand am selben Tag
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.