- Auf Grund eines temporären Systemfehlers, sind die angezeigten Tracking Informationen zu Ihren Bestellungen fehlerhaft. Bitte tracken Sie die angezeigten Sendungsnummern für den Versand nach Deutschland, über die GLS Sendungsverfolgung und für den Versand in EU-Länder, über das TNT/FedEx Tracking. Wir entschuldigen uns für die Unannehmlichkeiten.
- Wichtige Mitteilung: Aufgrund von COVID-19 sind unsere Importkosten für Produkte nach Europa enorm gestiegen. Daher wird ab dem 1. Mai 2020 vorübergehend ein zusätzlicher Frachtkostenzuschlag von 11,50 Euro pro Lieferung berechnet. Weitere Informationen finden Sie hier.
- Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 2:00 24/1/2021 bis 0:00 (CET) 25/1/2021 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.
Rechteckstecker（Applicable pin/contact：Stecker）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
- Empfehlung
D-Sub-Steckverbinder – XM2/XM3
OMRON
[Features]
・ These are D-sub connectors that are ideal for OA equipment interfaces.
・ These are shielded connectors for EMI countermeasures.
・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
・ A compact, sturdy type with a metal shell.
・ Various fasteners and ground conductor fittings are available.
▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).- Mengenrabatt
ab∗ ： 4.05 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
HONDA TSUSHIN KOGYO
Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Mengenrabatt
ab∗ ： 1.95 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
ab∗ ： 6.72 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-100 Stk. pro Packung】
Hirose Electronic
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.16 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14
Hirose Electronic
Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
[Features]
· Thin type.
· A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
· Circuit board mounting height: 2.5 mm.
· This makes it possible to draw signals from places where there is no space between the circuit boards.
· In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
· Supports automatic mounting.
· The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
· Additionally, magazine packing is also available for the on-board type.
· Four-walled type prevents socket from scraping the circuit board.
· Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
· Additionally, a reinforcement bracket is included to prevent solder from peeling.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.47 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Lötverbindung) – Serie HD
Hirose Electronic
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Mengenrabatt
ab∗ ： 2.69 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß, zwei Reihen, flache Ausführung) – Serie DF20
Hirose Electronic
[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 0.60 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD
Hirose Electronic
A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.- Mengenrabatt
ab∗ ： 9.83 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
ILME
CNE / CSE / CCE, general purpose screw type / spring type / crimped type, 16A / 500V, insert
[Features]
・CNE/CSE/CCE.
・General purpose screw type / spring type / crimped type.
▪ 16A / 500V.
▪ Insert- Mengenrabatt
ab∗ ： 9.25 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
MIXO modularer Einsatz und Kontakt
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Mengenrabatt
ab∗ ： 4.16 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-/FPC-/Koaxialkabel (dünn)-Steckverbinder (1 mm Rastermaß) – Serie DF19
Hirose Electronic
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.- Mengenrabatt
ab∗ ： 0.61 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
[Features]
· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 32.17 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder in Löt-/DIP-Ausführung, Serie 57
FUJIKURA (DDK)
A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).- Mengenrabatt
ab∗ ： 0.70 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A/50 bis 250 V, Einsatz
ILME
CD, general purpose crimped type, 10A / 50 - 250 V, Insert
[Features]
・CD general purpose crimped type.
・10A/50 - 250V.
▪ Insert- Mengenrabatt
ab∗ ： 4.01 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
CSH-Werkzeug nicht erforderlich, Federausführung, 16 A/500 V, Einsatz
ILME
CSH, no-tool-required spring type, 16A / 500V insert
[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert- Mengenrabatt
ab∗ ： 13.19 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Mengenrabatt
ab∗ ： 5.80 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6
Hirose Electronic
Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables:AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.- Mengenrabatt
ab∗ ： 1.68 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC
Hirose Electronic
A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.- Mengenrabatt
ab∗ ： 0.13 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß – Serie DF1B【1-10,000 Stk. pro Packung】
Hirose Electronic
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.03 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 2 terminal row. Can use for a wide range of equipment.
[Features]
· On-board improved space saving: The terminal pinout has been condensed into a 2-mm dual-row within a 5-mm width.
· Twice the number of signals can be acquired within the same space as a conventional 2-mm single-row connector.
· A wide array of variations: Crimped and pressure weld wiring connections are available in board-to-cable/relay/board-to-board connector types for expanding the scope of circuit board design.
· In addition, you can choose from gold/tin plating as well as versions which support SMT depending on the target application.
· Covers a broad range of compatible wiring: A 2 mm, dual-row compact design covers a range of compatible wiring from #22-30 AWG.
· Pressure welded labor-saving wire connection: By using fully automated pressure welding equipment, wire connections can be performed easily, including complex multi-harnesses (branched wiring connections), reducing the number of man-hours and eliminating manual processes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.09 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage), Serie RD*D
Hirose Electronic
These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
[Features]
· Has a metal shell and so has a small and lightweight connector.
• They are integrated with RD-type molds and are of simple construction.
• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
• The connection and the board mounting areas are metal plated.
• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
• Various accessories can be employed to allow these connectors to be used in different applications.- Mengenrabatt
ab∗ ： 4.14 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】
Hirose Electronic
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.16 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
MIL-Norm-konformer Flachbandkabel-Steckverbinder – Serie HIF3B
Hirose Electronic
MIL Standard-compliant ribbon cable connector. A wide variety are available and are used broadly in numerous types of devices and equipment.
[Features]
· MIL Standard-compliant: The HIF3B Series was developed as a MIL standard-compliant product, and is used for a broad range of purposes.
· Compatible with the HIF3 Series.
· UL certified product: The HIF3B Series is UL-certified as a connector.
· Mechanism for preventing incorrect insertion: Guiding method (MIL Standard) where guide keys are inserted in the pin header-side to create convex parts, which are fitted with the concave parts of sockets.
· Guiding is achieved via insertion of a polarizing key into the socket hole.
· Guiding achieved by fitting a convex element on the socket-side (HIF3A type) with a slot in the center of the pin-header side.
· Compatible wire AWG #28: Compatible wiring corresponds toAWG #28 flat cabling (7 wires／0.127 mm, diameter of outer covering 0.9±0.1mm)
Some in-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 1.25 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
E/A-Steckverbinder mit halbem Rastermaß (Originalausführung), Serie DX
Hirose Electronic
I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
- Mengenrabatt
ab∗ ： 4.53 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Hirose Electronic
This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).- Mengenrabatt
ab∗ ： 0.23 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】
Hirose Electronic
The SUMICON 1600 series of rectangular multi-pin connectors are built using an original Hirose Electric design. These connectors can be used for a variety of different applications based on the combination of connector unit and case employed.
[Features]
· The same nine versions that are available in the 1300 series are available here, with the numbers of pins equal to 8, 12, 16, 20, 24, 28, 34, 45, or 60.
· Connector units are available in soldering, wrapping, or crimping types.
· Available accessories include C cases, CA cases, CBA cases, ST stoppers, STA stoppers, STB stoppers, and others. Combining connectors with these accessories opens up a wide range of possible applications.- Mengenrabatt
ab∗ ： 1.25 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Gelötete Steckverbinder, Serie 17JE
FUJIKURA (DDK)
17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.- Mengenrabatt
- CAD ：
- 2D
ab∗ ： 0.70 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC2
FUJIKURA (DDK)
This 2.5 mm pitch crimped connector, which is for use with flat ribbon cables, is compliant with MIL-DTL-83503 and suitable for a variety of applications.
[Features]
▪ Compliant with MIL-DTL-83503.
·The new wire connecting operation is simple because the crimping system does not require removal of the coating.
▪ UL standard certified product (File No. E72124).
·The dual mechanism used to prevent incorrect mating includes both a polarity key and an incorrect insertion prevention key.
·Lock levers include the normal long lock as well as the short lock, which is suitable for use with low profiles.
·This connector is compatible with discrete wire crimping types in the HU series.
·This connector is also compatible with FRC2 headers and FRC5 socket connectors.ab∗ ： 3.65 € Minimum Lieferzeit ： 84 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han A (Schrauben-Verdrahtung)
Harting
This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..
- Mengenrabatt
ab∗ ： 9.03 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder Serie Han Q (Crimp-Verdrahtung)
Harting
This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).
- Mengenrabatt
ab∗ ： 8.97 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
CX entspricht dem Starkstrom-Multiformateinsatz
ILME
CX, high current-compatible, compound type, 80A/690V, insert
[Features]
・Compound CX compatible with high currents.
▪ 80A/690V.
▪ Insert- Mengenrabatt
ab∗ ： 15.60 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, E-Model Connector (Screw Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 13.29 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 11.34 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection)
MISUMI
Misumi Original Environment Resistant Waterproof Connector
- Mengenrabatt
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 12.39 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof E-Model Connector (Screw Connection)
MISUMI
E Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Screw Type
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 10.71 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof A-Model Connector (Screw Connection)
MISUMI
A Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Screw Type
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 9.03 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof D-Model Connector (Crimped Connection)
MISUMI
D Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Caulking
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 5.07 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Han Waterproof DD-Model Connector (Crimped Connection)
MISUMI
DD Model Connector
- Mengenrabatt
- UL
- CSA
- CE-Compliant
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Caulking
- Insertion
- Silver-Plated
- CAD ：
- 2D
ab∗ ： 15.43 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))
- Mengenrabatt
ab∗ ： 6.17 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)
- Mengenrabatt
ab∗ ： 6.51 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
WEIDMÜLLER
Crimp connection type high-density internal connector (500 V / 16 A / Number of pins 10, 18, 32, 46, 64 (+PE)).
- Mengenrabatt
ab∗ ： 14.26 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
HONDA TSUSHIN KOGYO
2.54 mm pitch, straight, right angle through hole type connector.
[Features]
· Based on our original design, the contacts have provide highly reliable contact.
· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
· A UL-certified product is used as an insulator.
· Reworking wiring mistakes is also simplified using the removal tool.
▪ Mating with FFC, MFC, HSC, DIC series is supported- Mengenrabatt
ab∗ ： 2.95 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
HONDA TSUSHIN KOGYO
Housing for the MRP series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Mengenrabatt
ab∗ ： 1.97 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM
Hirose Electronic
Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
[Features]
· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.- Mengenrabatt
ab∗ ： 4.72 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F
Hirose Electronic
This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
[Features]
▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
▪ Compatibility: pin header compatible with HIF3B series.- Mengenrabatt
ab∗ ： 1.10 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Spezifikationen |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | OMRON | HONDA TSUSHIN KOGYO | ILME | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | ILME | ILME | Hirose Electronic | Hirose Electronic | FUJIKURA (DDK) | ILME | ILME | HONDA TSUSHIN KOGYO | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | Hirose Electronic | FUJIKURA (DDK) | FUJIKURA (DDK) | Harting | Harting | ILME | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | WEIDMÜLLER | WEIDMÜLLER | WEIDMÜLLER | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | Hirose Electronic | Hirose Electronic |
| Artikelserie | Platine-zu-Kabel-Steckverbinder mit 1,25 mm Rastermaß – Serie DF13【1-100 Stk. pro Packung】 | Platine-zu-Kabel-Steckverbinder (1,25 mm Rastermaß, flache Bauweise) – Serie DF14 | Platine-zu-Kabel-Steckverbinder (1 mm Rastermaß, zwei Reihen, flache Ausführung) – Serie DF20 | D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD | Platine-zu-Kabel-/FPC-/Koaxialkabel (dünn)-Steckverbinder (1 mm Rastermaß) – Serie DF19 | CD-Crimp-Ausführung zur gemeinsamen Nutzung, 10 A/50 bis 250 V, Einsatz | CSH-Werkzeug nicht erforderlich, Federausführung, 16 A/500 V, Einsatz | Zweiteiliger Steckverbinder mit 1,27 mm Rastermaß, Serie HIF6 | Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß, Seitenverriegelung, Serie HNC | Platine-zu-Kabel-Steckverbinder mit 2,5 mm Rastermaß – Serie DF1B【1-10,000 Stk. pro Packung】 | D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage), Serie RD*D | D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】 | MIL-Norm-konformer Flachbandkabel-Steckverbinder – Serie HIF3B | E/A-Steckverbinder mit halbem Rastermaß (Originalausführung), Serie DX | Quadratischer Multi-Stift-Steckverbinder (SUMICON) Serie 1600【1-100 Stk. pro Packung】 | MIL-Norm-konformer Steckverbinder mit 2,54 mm Rastermaß, Serie FRC2 | Misumi, Waterproof, E-Model Connector (Screw Wire Connection) | Misumi, Waterproof, E-Model Connector (Crimp Wire Connection) | Misumi, Waterproof, DD-Model Connector (Crimp Wire Connection) | Rechteck-Schnittstellenstecker mit 1,78 mm Rastermaß, Serie QM | Boxausführung Stiftleiste mit 2,54 mm Rastermaß, Serie HIF3F | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| ab∗ | 4.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.72 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.69 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.83 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 32.17 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.68 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.13 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.25 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.70 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.65 € *Stückpreis Standardkonfiguration | 9.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.34 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.17 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.26 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.72 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.10 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 84 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage |
| Spezifikationen |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Connector Shape | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D· E· F | - | - | - | Sonstige | Sonstige | Dsub | Sonstige | Dsub | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | Sonstige | Dsub | Dsub | - | Sonstige | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| G·H·I | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | - | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Für Hochleistungsanwendungen | Sonstige | Sonstige | Sonstige | Sonstige | - | - | Sonstige |
| J·K·L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | MR | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | MIL | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MR | - | - |
| P· Q· R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker | Stecker |
| Number Of Cores | 9 ～ 37 | 8 ～ 50 | 5 ～ 12 | 2 ～ 15 | 2 ～ 30 | 9 ～ 50 | 10 ～ 50 | 9 ～ 37 | 6 ～ 48 | 1 ～ 25 | 8 ～ 20 | 4 ～ 8 | 14 ～ 50 | 7 ～ 64 | 6 ～ 48 | 20 ～ 96 | 20 ～ 100 | 2 ～ 15 | 2 ～ 40 | 4 ～ 32 | 9 ～ 25 | 9 ～ 37 | 6 ～ 64 | 20 ～ 100 | 2 | 8 ～ 60 | 9 ～ 37 | 14 | 3 ～ 32 | 5 ～ 12 | 4 ～ 42 | 6 ～ 48 | 6 ～ 24 | 24 ～ 72 | 6 ～ 48 | 3 ～ 32 | 7 ～ 64 | 24 ～ 108 | 3 ～ 16 | 6 ～ 24 | 32 ～ 46 | 20 | 8 ～ 50 | 14 ～ 26 | 10 ～ 60 |
| Application | Kabelanschluss | Für PCB / Plattenmontage | Kabelanschluss | Für PCB | Für PCB | Kabelanschluss | Für PCB | Kabelanschluss | Kabelanschluss | Kabelanschluss | Für PCB | Für PCB | Kabelanschluss / Plattenmontage | Kabelanschluss | Kabelanschluss | Für PCB / Plattenmontage | Für PCB | Für PCB | Kabelanschluss / Für PCB / Plattenmontage | Für PCB / Plattenmontage | Für PCB | Kabelanschluss | Für PCB | Kabelanschluss | Für PCB | Kabelanschluss / Für PCB | Kabelanschluss / Plattenmontage | Für PCB | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | - | - | - | Für PCB | Plattenmontage | Kabelanschluss | Für PCB |
| Allowable Current(A) | 5 | 3 | 10 ～ 40 | 1 | 1 | 3 | 1 | 1 | 16 | 4 ～ 200 | 1 | 7 | 5 | 10 | 16 | 1 | 0.5 | 3 | 0.5 ～ 3 | 2 | 3 | 3 | 1 | 0.5 | 1 | 3 | 5 | 1 | 10 ～ 16 | 10 ～ 16 | 16 ～ 80 | 16 | 16 | 10 | 16 | 10 | 10 | 10 | 10 ～ 22 | 16 ～ 24 | 16 | 3 | 3 | 0.5 | 1 |
| Allowable Voltage(V) | AC 300 | AC 300 | 400 ～ 690 | AC 150 | AC 150 | AC 400 | AC100 | 200 VAC | 500 | 50 ～ 1000 | AC100 | AC 300 | AC500 | 50 ～ 250 | 500 | 250 VAC | AC125 | 250 VAC | 250 VAC | 250 VAC | AC350 | AC350 | 200 VAC | AC125 | AC / DC 3000 | AC 300 | AC 300 | 250 VAC | 9/6/1900 ～ 250 | 230 ～ 600 | 400 ～ 690 | 500 ～ 600 | 500 ～ 600 | 250 ～ 600 | 500 ～ 600 | 250 ～ 600 | 250 ～ 600 | 250 ～ 300 | 250 | 500 | 500 | AC 300 | AC 300 | AC100 | 200 VAC |
| Wire connection method | - | Lötmittel | Crimp | Sonstige | Sonstige | Lötmittel | - | Pressschweißen | Crimp / Befestigung mit Schrauben / Sonstige | Crimp / Befestigung mit Schrauben / Sonstige | - | Sonstige | Lötmittel | Crimp | Sonstige | Pressschweißen | Sonstige | Sonstige | Crimp / Pressschweißen / Sonstige | Crimp / Sonstige | - | Crimp | Lötmittel / Sonstige | Pressschweißen | Sonstige | Lötmittel / Crimp / Sonstige | Lötmittel | - | Befestigung mit Schrauben | Crimp | Crimp / Befestigung mit Schrauben | Befestigung mit Schrauben | Crimp | Crimp | Befestigung mit Schrauben | Befestigung mit Schrauben | Crimp | Crimp | Befestigung mit Schrauben | Befestigung mit Schrauben / Sonstige | Crimp | - | Crimp | Lötmittel | Sonstige |
| Connection direction | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade / Winkel | Winkel | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Gerade / Winkel | Winkel | Gerade | Gerade / Winkel | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade / Winkel |
| Protection function (environmentally resistant) | - | N/A | - | - | - | - | - | - | - | - | - | - | N/A | - | - | N/A | - | - | - | - | - | - | - | - | - | - | N/A | N/A | Verfügbar | Verfügbar | - | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | N/A | N/A | N/A | N/A | - | - |
| Representative Standard | - | - | UL / CUL / CCC / CSA | - | - | - | - | - | UL / CCC / CSA | UL / CUL / CCC / CSA | - | UL / CSA | - | UL / CCC / CSA | UL / CCC / CSA | - | - | - | UL / CSA | UL / CSA | - | - | UL | - | UL / CUL / TUV | - | - | UL | UL / CSA | UL / CSA | UL / CCC / CSA | CE / UL | CE / UL | CE / UL | CE / UL / CSA | CE / UL / CSA | CE / UL / CSA | CE / UL / CSA | UL / CSA | UL / CSA | UL / CSA | - | - | - | - |
Loading...
Konfigurieren
Stock
-
- Nur Lagerteile anzeigen
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Connector Shape
- Quadratisch
- Sonstige
-
A· B· C
- Sonstige
-
D· E· F
- Dsub
- FCN
- Sonstige
-
G·H·I
- Für Hochleistungsanwendungen
- Sonstige
-
J·K·L
- Sonstige
-
M·N·O
- MR
- MIL
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- Sonstige
-
V· W· X
- Sonstige
-
Number
- Sonstige
-
Applicable pin/contact
- Stecker
- Buchse
- Kombination aus Stecker/Buchse
- Sonstige
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 1/24/1900
- 5
- 9/6/1900
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 24 V AC/DC
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- 125
- AC125
- 150
- AC 150
- AC 150 / DC 200
- 160
- 200 VAC
- 230
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 380
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 690/160 V (consumption/control range)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- AC1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Connection direction
- Gerade
- Winkel
- Sonstige
-
Protection function (environmentally resistant)
-
Representative Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- Hirose Electronic (42)
- ILME (12)
- FUJIKURA (DDK) (8)
- Harting (4)
- HONDA TSUSHIN KOGYO (4)
- MOLEX (4)
- OMRON (4)
- TE Connectivity (3)
- WEIDMÜLLER (3)
- 3M (2)
- FUJITSU COMPONENT (1)
- JAPAN AVIATION ELECTRONICS(JAE) (1)
- Hirschmann (0)
- Finder (0)
- Phoenix Contact (0)
- UNIVER (0)
- KEL (0)
- Fischer Elektronik (0)
- EDAC (0)
- Lumberg (0)
- Belden (0)
- DECA (0)
- Amphenol LTW (0)
- HellermannTyton (0)
- Provertha (0)
- Binder (0)
- SOURIAU (0)
- LAPP (0)
- MH Connectors (0)
- WAGO (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Rechteckstecker
Bezahlverfahren
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.