Koaxialstecker（Anschlussrichtung：Gerade）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Koaxialstecker Serie BNC
YUETSU SEIKI
The BNC connector features a bayonet lock connection system that can be easily attached and detached. It is utilized in a wide range of communication and measurement applications. Nominal impedance = 50 Ω.
[Features]
· BNC connector is a connector with a bayonet lock connection system that is easy to attach and detach. The connector is available with a nominal impedance of 50 Ω and 75 Ω (BNCC type).
· The cable length is also very adaptable for use in a wide range of communication and measurement applications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.56 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
BNC-Steckverbinder
HIROSE ELECTRONIC
Coaxial connector and BNC connector can be used with a wide variety of devices. · There is a rich selection of product types.
[Features]
・The most common 50Ø-type cable: BNC series is the most widely used 50Ø cable (there is also the 75Ø type).
・Bayonet lock for quick attachment and detachment: bayonet lock mechanism for easy attachment and detachment.
・Applicable cables: complete coaxial cables with an outer diameter of Ø3 - Ø8 (RG-55・58/U, etc.)
・Applicable regulations: Japan Defense Agency (DSPC6202).
▪ Japanese Industrial Regulations (JISC5412): based on MIL regulations.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.09 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SMT-Koaxialstecker, klein, Serie E.FL
HIROSE ELECTRONIC
This small coaxial cable occupies a circuit board area of 9.4 mm2.
[Features]
・Occupied circuit board area: Compared to the manufacturer of the H.FL series, the occupied circuit board area is reduced by approximately 49% - 56% with an occupied area of 9.2 mm2.
・Ultra-thin fluorine resin cable: bendable Ø0.81 and Ø1.32 ultra-thin fluorine resin cables are used in an effort to make laying cable easier.
・High coordination: the ability to handle high-frequency waves up to DC 2 GHz and a V.S.W.R. of 1.3 or less.
・Automatic mount compatibility: the receptacle's embossed packaging allows for automatic mounting.
・Easy connector removal: connectors can be easily removed using a removal tool.
・Easy mate confirmation: a definite lock feel can be used to confirm mating, even with ultra small models.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 0.73 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
N-förmiger Koaxialstecker – Serie N
HIROSE ELECTRONIC
A medium-sized coaxial connector with a screw coupling lock for broadband (up to DC 10 GHz). We stock a wide array of variations, such as plugs, jacks, and adapters, etc.
[Features]
· 1. Constant Impedance Connector - 50 Ω Series
· The N Series are medium-sized constant impedance connectors suitable for medium-sized coaxial cables (75 Ω Series is also available).
· 2. Lock-type Screw Coupling.
· A screw coupling with a locking mechanism for secure locking.
· 3. Compatible Cables
· RG-5/6/8/9/U, etc.
· 4. Compatible Standards
· Japan Defense Agency (DSPC6201).
· Japan Industrial Standards (JISC5411).
· MIL Standards Compliant.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 12.84 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
BNC-Steckverbinder-Kabelstecker
TO-CONNE
[Features]
· Small and light weight using a bayonet locking method for simple coupling. A plug.
▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.93 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker für SMA-Steckverbinderkabel
TO-CONNE
[Features]
· A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
· The body is made of stainless steel but less expensive brass is also available- Mengenrabatt
› Jetzt konfigurierenab∗ ： 10.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialkabel Serie BNC
TAJIMI ELECTRONICS
The BNC connector is the most widely used 50 Ω connector. Small, lightweight and easy to remove bayonet lock connection method, making it ideal for connection of equipment that will be connected and disconnected frequently.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.61 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Serie SMA
YUETSU SEIKI
The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics. It can be used at frequencies ranging up to DC–18 GHz.
[Features]
· The SMA coaxial connector is a compact, high-performance connector for microwaves. The SMA connector demonstrates superior performance, with excellent reliability, stability, and mechanical characteristics.
· It can be used at frequencies ranging up to DC–18 GHz. However, a model is also available that can be used for particularly high frequencies up to 25 GHz.
· We offer compatible cables, including semi-rigid cables, semi-flexible cables, and flexible cables for supporting a wide variety of applications.
· Available in both standard and affordable items depending on the type of body material and surface treatment.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Serie BNC75Ω
YUETSU SEIKI
The BNC connector features a bayonet lock connection system which is easily attached and detached, and is used in a wide range of communication and measurement applications. Nominal impedance is 75 Ω.
[Features]
· The BNC connector has a bayonet lock connection system which is easy to attach and detach, and is available with a nominal impedance of 50 Ω and 75 Ω (BNCC model).
· The cable size is also very adaptable and is being used for a wide range of communication and measurement applications.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Serie SMB
YUETSU SEIKI
[Features]
▪ The SMB connector is a compact connector featuring a snap-on/ pull-off attachment system, and can be utilized in frequencies ranging up to DC 4 GHz.
▪ The SMB series is suitable for applications such as GPS, mobile communications, and wireless LAM.
▪ Straight, L-angle, connectors for ultra-thin flexible cables, connectors for semi-rigid cables, and more are available.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.22 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung C05 – Serie UM
HIROSE ELECTRONIC
This is a quick-lock type coaxial connector. · There is a rich selection of product types.
[Features]
· Optimized for ultra-thin coaxial cables: ultra-small coaxial connector optimized for ultra-thin coaxial cables with high reliability.
· Lock system: The lock system is the quick lock type system.
· The quick lock type is regulated by Japan Defense Agency Standard DSPC6205.
· Connection system: The connection system is the extremely easy-to-use and reliable crimp attachment system.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 3.73 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MMCX-Steckverbinder
HIROSE ELECTRONIC
The MMCX connector is a small push-on lock coaxial connector.
[Features]
· Simple push-on format used for easy insertion and extraction.
· Able to load PCMCIA type II cards: MMCX-LR-SMT (40) have a thickness of 3.51 mm and can be loaded to the back side of type II cards.
· Moreover, if a 0.36 mm degree of eccentricity from the central card line is used when mounting a card on the circuit board mounting surface, the central card axis and central connector axis will be aligned.
· Ultra-thin cable compatibility: RG type high frequency coaxial cable... RG-178B/U (⌀1.8), ... RG-316/U (⌀2.59MAX), ⌀1.48 (single layer shield) fluorine resin coaxial cable, ⌀1.32 (double layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.13 (single layer shield) ultra-thin fluoride resin coaxial cable, ⌀1.37 (single layer shield) ultra-thin fluoride resin coaxial cable.
· Dual terminal connection with other series: Capable of dual terminal connection with U.FL, N, BNC, HRM, and TNC series.
· Highly coordinated: high frequency traits are realized with a voltage standing wave ratio (V.S.W.R.) of less than 1.2 at a frequency of up to DC 6 GHz (possessing representative value and not compatible with all products).
・Compatibility: the opening is standard, allowing for mating with MMCX connectors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 5.42 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SMA-Steckverbinder Serie HRM
HIROSE ELECTRONIC
This is a MIL standard coaxial connector, SMA connector. We were the first company to successfully develop this . With high reliability and different variations, it is used with a wide range of equipment.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SMT-Koaxialstecker, klein, Serie H.FL【100 Stk. pro Packung】
HIROSE ELECTRONIC
This is a small coaxial connector for circuit board mounting. It is low-profile with a height of 3 mm on mating.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 96.89 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Ausführung mit fester Dämpfung (Ausführung SMA)
HIROSE ELECTRONIC
A fixed attenuator with SMA connector shape mating components. An abundant selection of products featuring various plug and jack combinations and attenuation volume variations is available.
[Features]
• Abundant variations of all kinds of attenuation volume: Attenuation is available in ranges from 0 - 4 dB in 0.5 dB steps, 4 - 10 dB in 1 dB steps, and 12, 13, 14, 15, 20, 26, and 30 dB models with fine level adjustment options, for an abundant selection of variations.
• SMA type: The mating shape features a combination of plug and jack components, and the exterior is made from stainless steel with a small and durable structure.
• Highly adjustable with high reliability: The attenuation element design uses a constant distribution circuit and metal film resistance, and V.S.W.R. provides a high level of adjustability as shown in the separate table.
• Also, this unit has stable operation properties in a variety of different environments in terms of temperatures, humidity levels, gas conditions and other factors.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 82.40 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialschalter (DC – 6 GHz) zur Prüfung kleiner Ausführungen, halogenfrei, Höhe 1,6 mm
HIROSE ELECTRONIC
An ultra-small coaxial switch for circuit checking with a mount height of 1.6 mm. 2.7 mm × 2.7 mm space saving design. Corresponds to halogen-free specifications.
[Features]
· Low insertion losses: 6 GHz TYP when not mated. Low insertion losses of 0.1 dB.
· Space-efficient design: 2.7 mm × 2.7 mm space-efficient design.
· Low profile: Working towards profile with height of 1.6 mm.
· Lightweight: Lightweight, weighing 0.025 g.
· Long life: Sufficient reliability ensured for 100 circuit insertions and extractions.
· Wide range of use: Usable with frequencies up to DC 6 GHz.
· Prevents solder oozing: signal terminals are plated and a nickel barrier is placed between the connection and mounting portions in order to prevent solder oozing for a variety of soldering styles.
· Corresponds to automatic mounting: embossed tape allows for automatic mounting.
· Also available with absorbent cap.
· Halogen free: The receptacle does not use chlorine or bromine.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 35.51 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialschalter (DC – 6 GHz) für kleine Schnittstellen mit 3,9 mm Höhe
HIROSE ELECTRONIC
An ultra-small coaxial switch with a mount height of 3.9 mm. Can also be used as an external antenna connector in addition to circuit checking.
[Features]
· Low insertion losses: 1 GHz TYP when not mated. 0.08 dB 2GHz TYP. Low insertion losses of 0.10 dB.
· Space saving: The outer dimensions are 5.8 mm x 5.4 mm to save space.
· Low profile: Working towards profile with height of 3.9mm.
· Lightweight: Lightweight, weighing 0.11g.
· Long life: a life span of 12,000 insertions and extractions.
· Supports automatic mounting: embossed tape allows for automatic mounting.
· Wide range of use, corresponds to up to DC 6 GHz: Usable with frequencies up to DC 6 GHz.
・Lead free: both the receptacle and plug are lead free out of consideration for environmental issues.
・Furthermore, the construction takes flux oozing into consideration.
· Self alignment: ±0.5 mm guide amount when mating with plug.› Jetzt konfigurierenab∗ ： 78.62 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Kleiner Koaxialstecker mit Schiebe-Schnappverschluss, Serie MSS
HIROSE ELECTRONIC
Utilizing a slide snap lock method, both the internal and external conductors are in almost perfect contact, providing excellent durability. There are two types of wiring methods used: crimp wire connection and screw clamps. Compliant with Japan Defense Agency DSPC-6206.
[Features]
• The Japan Defense Agency has enacted a specifications document: DSPC-6206.
• Every aspect of performance for mid-size connectors is specifically demonstrated, and although the size is exceedingly miniaturized, performance is comparable to mid-sized high frequency connectors.
• A slide snap locking system is utilized within the external conductor, and this conductor has near complete contact and also demonstrates excellent vibration resistance.
• Wire connection work can be conducted in a thoroughly simplified and assured manner using one of these two methods: the crimp wire connection method or the screw clamp method.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Leichte, SMT-kompakte Koaxialsteckverbinder der U.FL-Serie (1,9, 2,3, 2,4 mm)
HIROSE ELECTRONIC
The de facto standard for low-profile miniature coaxial connectors. Used for various devices, including many types of antenna connections, wireless modules, and more.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 26.52 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Reflexionsfreie End-Klemme (SMA-Ausführung) , Serie HRM-TM
HIROSE ELECTRONIC
This is a highly functional and non-reflective end terminal using our independent high-frequency wave coordination technology. The opening is an SMA connector.
[Features]
· High performance: an end-terminal device that achieves an ultra wide range and ultra high frequency coordination without reflection using independent, high-frequency wave coordination technology.
· With SMA connector: using externally-equipped stainless steel and a hard SMA connector (HRM series).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 26.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie CN-6-J
SATO PARTS
[Features]
▪ Receptacle part of CN-6. Safe and reliable product made in Japan.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 16.31 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie CN-6-P
SATO PARTS
[Features]
▪ Works with the plug of CN-6.
▪ CN-5-P and CN-6-P are identical products.
· The colors are red and black. Safety and reliability are assured because it is manufactured in Japan.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 21.43 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CN-7017-J
SATO PARTS
[Features]
▪ Receptacle part of CN-7017.
▪ This is a product which is the same as CN-5-J, CN-7041-J, and CN-7042-J and it is reliable because it is made in Japan.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 11.53 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CN-7017-P
SATO PARTS
[Features]
▪ Works with the plug of CN-7017.
· A safe and reliable product that is made in Japan and is identical to CN-7017-P, CN-7018-P.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 17.99 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
CN-7018-P
SATO PARTS
[Features]
▪ Works with the plug of CN-7018.
· A safe and reliable product that is made in Japan and is identical to CN-7017-P, CN-7018-P.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 8.05 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Form TNC – Serie TNC
HIROSE ELECTRONIC
A small, locking type screw coupling coaxial connector. This connector is optimally suited to connecting to mobile radio equipment antennas due to its mechanical robustness.
[Features]
· 1. Mechanically robust due to center locking contact.
· 2. The center wire is connected by solder and the outer wires are connected by crimped terminal connectors.
· 3. Optimally suited to connecting to mobile radio equipment antennas.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 14.77 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung 75 Ω SMB, Serie 27CP
FUJIKURA (DDK)
[Features]
· The 27CP series of connectors correspond to a 75 Ω version of the 27DP series of connectors (50 Ω type).
· This connector, which is representative of small 75 Ω connectors, is frequently used in applications such as interfaces inside devices.
· The push-on method makes it easy to connect or disconnect.
· This part is not compatible with the 27DP series.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 13.57 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung SMB, Serie 27DP
FUJIKURA (DDK)
Connectors are made to be compliant with the SMB type defined in MIL-PRF-39012. Can be used for miniaturization and increasing the density of communications equipment
[Features]
• The 27DP series correspond to connectors made to be compliant with the SMB (Sub-Miniature Type B) type defined in MIL-PRF-39012.
· A 50 Ω connector for fine cabling that enables miniaturization and increased density of communications equipment.
• The coupling mechanism is push-on, and cables are mounted by crimping or soldering.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 18.95 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage)
FUJIKURA (DDK)
[Features]
• These insulated receptacles are panel mounted and connected to BNC series (plug) connectors.
· Reliable insulation is achieved between the external conductor of the connector and the panel.
▪ The ground terminal is connected to the external conductor and integrated with the mold adjacent to the central conductor. Hence, it is easy to handle.
• The round-pin contact types (31-10-CF and 31-10-CAu-CF) are UL-listed (UL File No. E72124).- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.41 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie BNC – Koaxialstecker Ausführung BNC
FUJIKURA (DDK)
[Features]
• BNC series connectors are used in a wide range of products as 50-Ω coaxial connectors.
• Compact and lightweight, these connectors are often used as interfaces, particularly for equipment that is frequently mounted and dismounted, thanks to their easily coupled and disengaged bayonet lock connection mechanism.
• If you use 75-Ω cables, use these connectors at frequencies of 200 MHz or less.
• When exceeding 200 MHz, use BNC75 series connectors.
• BNC and BNC75 series connectors are interchangeable.- Mengenrabatt
- 2D CAD Daten verfügbar
› Jetzt konfigurierenab∗ ： 7.81 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Koaxialstecker Ausführung N, Serie N
FUJIKURA (DDK)
[Features]
• The N series are 50 Ù-type 7-mm coaxial connectors (inner diameter of outer conductor) with an excellent track record.
• A wide variety is offered to fit various types of cable.
(Note): This is not compatible with the NC series (75-Ω series), so please be careful.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 29.10 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Serie 27 DS – Koaxialsteckverbinder Ausführung SMC
FUJIKURA (DDK)
These connectors are made to be compliant with the SMC type defined in MIL-PRF-39012. Applicable to miniaturization and high density of communication equipment
[Features]
· The 27DS series are connectors made to be compliant with the SMC (SubMiniature Type C) type defined in MIL-PRF-39012.
· This is a 50 Ω connector for a fine cable that is compatible with efforts to make communications equipment small and dense.
· We recommend tightening couplings to a torque of 24.5–35.3 Ncm.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 61.64 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
BNC-Steckverbinderhülse
TO-CONNE
[Features]
· Small and light weight using a bayonet locking method for simple coupling. Receptacles.
▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 7.92 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Isolierte Steckhülse BNC-Steckverbinder
TO-CONNE
[Features]
· Small and light weight using a bayonet locking method for simple coupling. Insulated receptacle.
▪ When a 75 Ω cable is used with a 50 Ω type connector, and the frequency is 200 MHz or less, it can be used on a 75 Ω transmission line, but when the frequency exceeds 200 MHz, use of a BNC 75 Ω type is recommended.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.49 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker für F-Steckverbinderkabel
TO-CONNE
[Features]
• Used primarily in TV antennas used for terrestrial digital broadcasting.
• Uses a coaxial core wire (center conductor) as its contact.
• Uses the center conductor of the coaxial cord as its contact.- Mengenrabatt
› Jetzt konfigurierenab∗ ： 4.61 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SMA-Steckverbinderhülse
TO-CONNE
[Features]
· A high performance compact connector for microwaves which is usable over a wide frequency range, and features superior durability.
· The body is made of stainless steel but less expensive brass is also available- Mengenrabatt
› Jetzt konfigurierenab∗ ： 10.88 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker für SMB-Steckverbinderkabel
TO-CONNE
[Features]
· High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment› Jetzt konfigurierenab∗ ： 11.36 € Minimum Lieferzeit ： 10 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckhülsen für SMB-Steckverbinder-PCB
TO-CONNE
[Features]
· High frequency-compatible connector wherein the connection method used is a push on method primarily designed for size and weight reduction of equipment- Mengenrabatt
› Jetzt konfigurierenab∗ ： 6.96 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| S· T· U |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Impedanz(Ω) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | YUETSU SEIKI | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | TO-CONNE | TO-CONNE | TAJIMI ELECTRONICS | YUETSU SEIKI | YUETSU SEIKI | YUETSU SEIKI | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | SATO PARTS | SATO PARTS | SATO PARTS | SATO PARTS | SATO PARTS | HIROSE ELECTRONIC | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | TO-CONNE | TO-CONNE | TO-CONNE | TO-CONNE | TO-CONNE | TO-CONNE |
| Artikelserie | Koaxialschalter (DC – 6 GHz) zur Prüfung kleiner Ausführungen, halogenfrei, Höhe 1,6 mm | Koaxialschalter (DC – 6 GHz) für kleine Schnittstellen mit 3,9 mm Höhe | Kleiner Koaxialstecker mit Schiebe-Schnappverschluss, Serie MSS | Steckverbinder / Leichte, SMT-kompakte Koaxialsteckverbinder der U.FL-Serie (1,9, 2,3, 2,4 mm) | Serie 31 – BNC-isolierte Steckhülsen (Ausführung für Plattenmontage) | |||||||||||||||||||||||||||||||||
| CAD |
| |||||||||||||||||||||||||||||||||||||
| ab∗ | 3.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.93 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.20 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.22 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.42 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 96.89 € *Stückpreis Standardkonfiguration Mengenrabatt | 82.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 78.62 € *Stückpreis Standardkonfiguration | 6.38 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.77 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.57 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.41 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 29.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 61.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.92 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.49 € *Stückpreis Standardkonfiguration | 4.61 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.36 € *Stückpreis Standardkonfiguration | 6.96 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 10 Arbeitstage | 5 Arbeitstage |
| Steckerform | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial | Koaxial |
| A· B· C | BNC | BNC | - | - | BNC | - | BNC | - | BNC | - | - | - | - | - | Sonstige | - | - | - | - | - | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - | - | - | - | BNC | - | - | BNC | BNC | - | - | - | - |
| D· E· F | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - |
| G·H·I | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | N | - | - | - | - | - | - | - | Sonstige | - | - | - | MS | MS | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | N | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | SMA | - | SMA | - | SMB | Sonstige | - | SMA | - | - | - | - | - | Sonstige | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | SMA | SMB | SMB |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | - | - | Sonstige | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) | Stecker (Stecker) / Sonstige | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Sonstige | - | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Buchse (Buchse) | Buchse (Buchse) | Stecker (Stecker) | Buchse (Buchse) | Stecker (Stecker) | Buchse (Buchse) |
| Anzahl der Adern | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - | - | - | - | - | - | 1 | 1 | 1 | 1 | 1 | 1 |
| Anwendung | Kabelanschluss | Kabelanschluss / Für Leiterplatten / Plattenmontagen / Sonstige | Für Leiterplatten | Kabelanschluss / Sonstige | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss / Für Leiterplatten / Sonstige | Kabelanschluss / Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Für Leiterplatten | Sonstige | Plattenmontagen | Für Leiterplatten | Kabelanschluss / Für Leiterplatten / Plattenmontagen | Plattenmontagen | - | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Plattenmontagen | Kabelanschluss / Plattenmontagen | Kabelanschluss / Plattenmontagen | Kabelanschluss | Plattenmontagen | Plattenmontagen | Kabelanschluss | Für Leiterplatten / Plattenmontagen | Kabelanschluss | Für Leiterplatten |
| Zulässiger Strom(A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Zulässige Spannung(V) | 500 | - | 60 V AC eff | - | 500 | 500 | 350 | 335 | 500 | 335 | 150 ～ AC 150 Vrms | - | 330 | 60 V AC eff | - | - | - | AC 150 Vrms | 60 V AC eff | - | - | - | - | - | - | AC 150 Vrms | - | - | - | - | - | - | 500 | 500 | - | 500 | 500 | 500 |
| Verdrahtungsverfahren | Crimp / Sonstige | Lötmittel | - | Lötmittel | Lötmittel / Crimp | Lötmittel | Lötmittel | Lötmittel / Crimp | Crimp / Sonstige | Lötmittel / Crimp | Lötmittel | Lötmittel / Sonstige | Lötmittel | - | - | - | - | Lötmittel | - | - | Lötmittel | Lötmittel | Lötmittel | Lötmittel | Lötmittel | Lötmittel | Crimp | Crimp | - | Lötmittel / Crimp | Lötmittel | Crimp | - | - | Crimp | - | Lötmittel | - |
| Anschlussrichtung | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade |
| Schutzfunktion (umweltbeständig) | N/A | N/A | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | - | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A |
| Impedanz(Ω) | 50 | 50 | 50 | 50 / 75 | 50 | 50 | 50 | 50 | 75 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | - | - | - | - | - | 50 | 75 | 50 | Sonstige | 50 | 50 | 50 | 50 | 50 | - | 50 | 50 | 50 |
| Repräsentativer Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UL | - | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Lagerbestand
-
- Nur Lagerteile anzeigen
-
Steckerform
- Koaxial
-
A· B· C
- BNC
- Sonstige
-
D· E· F
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- MS
- N
- Sonstige
-
S· T· U
- SMA
- SMB
- Sonstige
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Kombination mit Stecker/Buchse
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
- Sonstige
-
Schutzfunktion (umweltbeständig)
-
Impedanz(Ω)
- 50
- 75
- Sonstige
-
Repräsentativer Standard
Marke
-
- HIROSE ELECTRONIC (14)
- TO-CONNE (8)
- FUJIKURA (DDK) (6)
- SATO PARTS (5)
- YUETSU SEIKI (4)
- TAJIMI ELECTRONICS (1)
- KNIPEX (0)
- HUBER+SUHNER (0)
- KASH (0)
- DENSAN (0)
- ECON CONNECT (0)
- BKL ELECTRONIC (0)
- CLIFF (0)
- PHOENIX CONTACT (0)
- NEUTRIK (0)
- TRU COMPONENTS (0)
CAD Format
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Koaxialstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.