Leitungsschläuche
?* Informationen zur Lieferzeit und Preisen
-
Flexibler Schlauch Feuerfeste P-Ausführung
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedab∗ ： 107.50 € Minimum Lieferzeit ： 13 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 23.66 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Minimum Lieferzeit ： 13 Arbeitstage -
Leitungsschlauch, Faltenschlauch
KANAFLEX CORPORATION
Can be extended or contracted freely and stored at a compact size 1/3 - 1/3.5 of its extended length. Has a large mouth, but is lightweight at φ200 - 2㎏/m, and can be made compact for easy transportation.
Minimum Lieferzeit ： 17 Arbeitstage -
Minimum Lieferzeit ： 13 Arbeitstage -
Minimum Lieferzeit ： 15 Arbeitstage -
Minimum Lieferzeit ： 11 Arbeitstage -
Hitzebeständiger / verschleißfester Spiralschlauch Superplus T KTR
TOYO TIRE & RUBBER
▪ Inner layer is rubber with excellent abrasion resistance. It is lightweight and very flexible. Easy to handle and has excellent workability. Conductive rubber is used, therefore it has an excellent anti-static effect. Excellent durability, resistance to weather, and ozone crack resistance. Small bend radius, hard to form winding deformation., can be used under a wide range of temperatures from -30°C to 100°C.
Minimum Lieferzeit ： 11 Arbeitstage -
Minimum Lieferzeit ： 13 Arbeitstage -
Minimum Lieferzeit ： 11 Arbeitstage -
Minimum Lieferzeit ： 15 Arbeitstage -
Leitungsschlauch, Schlauch durchsichtig
KANAFLEX CORPORATION
[Features]
▪ As the equipment is transparent, the product can be seen passing through it.
▪ It has less internal resistance and a large transport capacity.
▪ As the equipment is light in weight, it is easy to bend and is work-efficient.
▪ Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 11 Arbeitstage -
TAC Hitzebeständiges Rohr MD-25 (Freie Rohrleitung)
TOTAKU INDUSTRIES
[Features]
· Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
· Flexible and easy to store and transport.
· The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)Minimum Lieferzeit ： 12 Arbeitstage -
Verzinktes Stahlblech, flexibel (flexibles Eisen) Kompaktausführung
KURIMOTO
Thin zinc plating steel plate flexible duct. It has been compressed to 1 m: Extend it before use. [Please study the safety precautions in the catalog.] Sold individually, starting from one unit.
ab∗ ： 28.13 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Metallflexrohr (Metallo-Flex) AA Typ
OHTSUKA
[Features]
• Excellent flexibility and easy handling.
• Small diameter is used for wire covering, etc.ab∗ ： 163.81 € Minimum Lieferzeit ： 33 Arbeitstage *Stückpreis Standardkonfiguration
-
Minimum Lieferzeit ： 15 Arbeitstage -
Leitungsschlauch, Schlauch N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.Minimum Lieferzeit ： 12 Arbeitstage -
Leitungsschlauch, Harter Schlauch N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 12 Arbeitstage -
Leitungsschlauch, Flexibler Schlauch, T-Ausführung,
KANAFLEX CORPORATION
Lightweight and expands/contracts freely. Goes down to 1/3-1/4 of its length, minimizing storage space before mounting. Easy Cutting/mounting for simple pipe work.
ab∗ ： 59.70 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, AR-Ausführung,
KANAFLEX CORPORATION
[Features]
· Offers excellent abrasion resistance compared to PVC-type duct hoses.
· Excellent cold resistance and heat resistance (operating temperature range: 30°C to 80°C).
· This is a high-quality duct hose with effective conductivity (anti-static).
· Since it does not curl easily, the treatment becomes very simple.
· This hose adapts quickly to the temperature of the work environment, and does not develop ozone cracks (fissures) like those in existing hoses.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Schlauch EF-Ausführung, (antistatisch)
KANAFLEX CORPORATION
A special blended soft vinyl chloride provides superior anti-static. Transparent (a clear green), so you can see what is running through.
Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Kana Aluminiumschlauch
KANAFLEX CORPORATION
[Features]
▪ Flexible, bendable, and easy piping in narrow spaces.
▪ Shrinkage to 1/10 and can be stowed compactly (II type).
▪ Lightweight and portable.
▪ Hose saves inventory and transportation space.
· Cutting and mounting are easy and piping work can be performed easily.- Mengenrabatt
ab∗ ： 58.73 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
TAC Transparente Leitung
TOTAKU INDUSTRIES
Transparent TAC duct EE allows the user to verify what is being transported.
Minimum Lieferzeit ： 12 Arbeitstage -
TAC Leitung AS
TOTAKU INDUSTRIES
TAC SD-AS duct type. Maintains an anti-static effect via the use of a special blended soft resin.
[Features]
TAC SD-AS duct type.
Maintains an anti-static effect via the use of a special blended soft resin.Minimum Lieferzeit ： 12 Arbeitstage -
Tiflex-Schlauch P-Modell
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.
ab∗ ： 68.34 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
U-LOCK GS
OHTSUKA
A duct coated with silicon and a glass fiber cloth, providing general-purpose air distribution and excellent heat resistance.
ab∗ ： 212.06 € Minimum Lieferzeit ： 33 Arbeitstage *Stückpreis Standardkonfiguration
-
O-FLEX TUBE CAG-Serie
OHTSUKA
[Features]
• Heat resistance with continuous 250°C , 1h 250°C .
• Vibration resistance.
· Compressive strength 200N or higher- Mengenrabatt
ab∗ ： 84.12 € Minimum Lieferzeit ： 28 Arbeitstage *Stückpreis Standardkonfiguration
-
O-FLEX TUBE CA-Serie
OHTSUKA
[Features]
• Heat resistance with continuous 250°C , 1h 250°C .
• Vibration resistance.
· Compressive strength 200N or higherab∗ ： 119.58 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, D-Ausführung,
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Schlauch EE-Ausführung,
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, New-Kana-Schlauch
KANAFLEX CORPORATION
[Features]
· Superior heat resistance with a reinforced cord.
▪ Light in weight, flexible, and labor-saving.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Schlauch öldicht
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.
Minimum Lieferzeit ： 11 Arbeitstage -
Leitungsschlauch, Metallschlauch (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.
- Mengenrabatt
ab∗ ： 95.84 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Metallschlauch (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easilyab∗ ： 229.36 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Kana Aluminium, Ausführung II
KANAFLEX CORPORATION
Flexible and bendable, for easy deployment in tight spaces. Can be stowed at 1/10 its full extended length. Lightweight and portable. Lets you save inventory and transportation space.
ab∗ ： 52.76 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Leitungsschlauch, Isolationsschlauch S
KANAFLEX CORPORATION
[Features]
· This duct hose is for ventilation of highly insulated, airtight houses.
· High thermal insulation effect prevents condensation.
· Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
· Single and double types available.Minimum Lieferzeit ： 17 Arbeitstage -
Minimum Lieferzeit ： 12 Arbeitstage -
Minimum Lieferzeit ： 12 Arbeitstage -
TAC Leitung D
TOTAKU INDUSTRIES
Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
[Features]
Achieves labor savings due to bendability and low weight.
· Cutting and mounting are easy and piping work can be performed easily.Minimum Lieferzeit ： 12 Arbeitstage -
TAC Leitung EE
TOTAKU INDUSTRIES
A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.
Minimum Lieferzeit ： 12 Arbeitstage -
TAC Aluminiumleitung
TOTAKU INDUSTRIES
For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
[Features]
· Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
· TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
· Repeatedly bendable. Excellent heat resistance (up to 80°C)Minimum Lieferzeit ： 12 Arbeitstage -
TAC Faserkanal
TOTAKU INDUSTRIES
[Features]
▪ It can be stretched due to reinforced cord, and has excellent bending durability.
▪ Ivory white colored ring that changes the image of vinyl duct, matches the new equipment.Minimum Lieferzeit ： 12 Arbeitstage -
TAC Helanleitung
TOTAKU INDUSTRIES
Duct hose with 2 times the wear resistance of TAC ducting (according to internally conducted testing). Superior cold and heat resistance and anti-static properties. Duct hose not easily subject to ozone cracking.
[Features]
Is wear resistant and has superior cold and heat resistance (operating temperature range is -30°C to 80°C).
· Duct hose with superior anti-static properties (material volume resistivity/105 Ω-cm or less).
· Duct hose resistant to ozone cracking that can occurs in conventional rubber hosesMinimum Lieferzeit ： 12 Arbeitstage -
TAC Festrohr PP
TOTAKU INDUSTRIES
Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
[Features]
· 10 to 20% lighter than conventional (PVC) products .
· Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
· The opening diameter can be changed by twisting the opening.
· Can be cut with knives etc.
· Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
· Ducts may be incinerated after use.Minimum Lieferzeit ： 12 Arbeitstage -
TAC Erweiterungsleitung
TOTAKU INDUSTRIES
Duct hose capable of telescoping that can be secured flexibly at any angle in any direction (however, holding force is reduced according to the aperture diameter). Can be shortened to 1/3 - 1/4 of its original length.
[Features]
· Excellent oil resistance.
· Ivory color matches typical equipment.
· Lightweight with superior bend resistance.
· High efficiency due to low interior resistance, which contributes to energy savings.Minimum Lieferzeit ： 48 Arbeitstage
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit |
| Werkstoff |
| Nutzung Schneidservice |
| Eigenschaften |
| ID d(Ø) |
| Aussen - D(Ø) |
| Farbe |
| Zulässige Flüssigkeit |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TIGERS POLYMER | MISUMI | MISUMI | KANAFLEX CORPORATION | KURARAYPLASTICS | MISUMI | MISUMI | TOYO TIRE & RUBBER | KURARAYPLASTICS | MISUMI | MISUMI | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | KURIMOTO | OHTSUKA | MISUMI | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TIGERS POLYMER | OHTSUKA | OHTSUKA | OHTSUKA | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES |
| Artikelserie | Hitzebeständiger / verschleißfester Spiralschlauch Superplus T KTR | Saugschläuche mit Spiralverstärkung / Ölbeständig / Ohne Stutzen | Verzinktes Stahlblech, flexibel (flexibles Eisen) Kompaktausführung | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| ab∗ | 107.50 € *Stückpreis Standardkonfiguration | 23.66 € *Stückpreis Standardkonfiguration Mengenrabatt | - | - | - | - | - | - | - | - | - | - | - | 28.13 € *Stückpreis Standardkonfiguration | 163.81 € *Stückpreis Standardkonfiguration | - | - | - | 59.70 € *Stückpreis Standardkonfiguration | - | - | 58.73 € *Stückpreis Standardkonfiguration Mengenrabatt | - | - | 68.34 € *Stückpreis Standardkonfiguration | 212.06 € *Stückpreis Standardkonfiguration | 84.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 119.58 € *Stückpreis Standardkonfiguration | - | - | - | - | 95.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 229.36 € *Stückpreis Standardkonfiguration | 52.76 € *Stückpreis Standardkonfiguration | - | - | - | - | - | - | - | - | - | - |
| Minimum Lieferzeit | 13 Arbeitstage | 9 Arbeitstage | 13 Arbeitstage | 17 Arbeitstage | 13 Arbeitstage | 15 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 13 Arbeitstage | 11 Arbeitstage | 15 Arbeitstage | 11 Arbeitstage | 12 Arbeitstage | 7 Arbeitstage | 33 Arbeitstage | 15 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 7 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 7 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 7 Arbeitstage | 33 Arbeitstage | 28 Arbeitstage | 7 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 11 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 17 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 12 Arbeitstage | 48 Arbeitstage |
| Werkstoff | Olefin-Harz | Aluminium | Polypropylen / PVC | PVC | PVC | Polypropylen | Aluminium / Spezielle Glasbeschichtung / Rostfreier Stahl | Olefin-Harz | PVC | Polypropylen | PVC | PVC | Spezielle Glasbeschichtung | Stahl | Aluminium | Polypropylen | Elastomer | Olefin-Harz | Olefin-Harz | Olefin-Harz | PVC | Aluminium | PVC | PVC | Olefin-Harz | Spezielle Glasbeschichtung | Spezielle Glasbeschichtung | Aluminium | PVC | PVC | PVC | PVC | Aluminium | Spezielle Glasbeschichtung | Aluminium | PVC | Elastomer | Elastomer | PVC | PVC | Aluminium | PVC | Polypropylen | Polypropylen | Polypropylen |
| Nutzung Schneidservice | Keine | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Enthalten | Keine | Keine | Keine | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Keine | Enthalten | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Keine | Keine | Enthalten | Enthalten | Enthalten | Enthalten | Enthalten | Keine | Enthalten | Enthalten | Enthalten | Keine |
| Eigenschaften | Standard / Flammbeständigkeit / Sonstige | Standard | Standard | Standard | Antistatische Eigenschaften | Abriebfestigkeit / Kältebeständigkeit | Flammbeständigkeit / Wärmebeständigkeit / Geringe Partikelfreisetzung | Antistatische Eigenschaften / Wärmebeständigkeit / Sonstige | Flexibilität | Standard / Antistatische Eigenschaften | Ölbeständigkeit | Standard | Standard / Flammbeständigkeit / Wärmebeständigkeit | Flammbeständigkeit / Flexibilität | Flammbeständigkeit / Sonstige | Standard | Standard / Antistatische Eigenschaften / Wärmebeständigkeit | Standard / Wärmebeständigkeit | Standard | Standard / Antistatische Eigenschaften / Abriebfestigkeit / Kältebeständigkeit / Wärmebeständigkeit | Standard / Antistatische Eigenschaften | Standard | Standard | Antistatische Eigenschaften | Standard / Flexibilität / Sonstige | Wärmebeständigkeit | Wärmebeständigkeit / Sonstige | Wärmebeständigkeit | Standard | Standard | Standard | Standard / Ölbeständigkeit | Standard / Flammbeständigkeit | Standard / Flammbeständigkeit | Standard | Standard | Standard / Abriebfestigkeit / Flexibilität | Standard / Antistatische Eigenschaften / Abriebfestigkeit | Standard | Standard | Standard / Wärmebeständigkeit | Standard | Standard / Antistatische Eigenschaften / Abriebfestigkeit / Kältebeständigkeit / Wärmebeständigkeit | Standard | Standard |
| ID d(Ø) | 37.5 ～ 302 | 39 ～ 150 | 35 ～ 152.4 | 250 ～ 500 | 25.4 ～ 203.6 | 38 ～ 152.4 | 50.9 ～ 152 | 38 ～ 125.7 | 359 ～ 512 | 38 ～ 152.4 | 76.4 ～ 152.4 | 32.4 ～ 227 | 51 ～ 303.5 | - | 50.8 ～ 80 | 75 ～ 100 | 38.1 ～ 125.9 | 55 ～ 300 | 39 ～ 155 | 38.1 ～ 303 | 32.4 ～ 152.4 | 42.7 ～ 303 | 32.4 ～ 203.7 | 32.4 ～ 152.4 | 37.5 ～ 302 | 79 ～ 304 | 10 ～ 80 | 10 ～ 76.2 | 32.4 ～ 303 | 32.4 ～ 278 | 32 ～ 303 | 32.4 ～ 203.7 | 51 ～ 304 | 51 ～ 304 | 109 ～ 211 | 100.3 | 32 ～ 303 | 38 ～ 203.2 | 32.4 ～ 303 | 32.4 ～ 303 | 39 ～ 300 | 32 ～ 203.7 | 38 ～ 303 | 90 ～ 300 | 35 ～ 294 |
| Aussen - D(Ø) | 41.5 ～ 308 | 45 ～ 155.7 | 42 ～ 164.8 | 265 ～ 520 | 32 ～ 217.5 | 46.8 ～ 166.2 | 54.5 ～ 157 | 48 ～ 139.9 | 378.5 ～ 532 | 45 ～ 164 | 86.4 ～ 164.8 | 38.6 ～ 240.8 | 54.5 ～ 306.5 | - | 56 ～ 85 | 82.4 ～ 107.4 | 44.5 ～ 137 | 61.8 ～ 310 | 42 ～ 159 | 47.8 ～ 328.2 | 38.6 ～ 164.8 | 45 ～ 305.9 | 38.6 ～ 217.1 | 38.6 ～ 164.8 | 41.5 ～ 308 | 87 ～ 314 | - | - | 38.6 ～ 315.6 | 38.6 ～ 292.6 | 39.2 ～ 320 | 38.6 ～ 217.1 | 55 ～ 308 | 55 ～ 308 | 111.4 ～ 214 | 118 | 38 ～ 322 | 45 ～ 216 | 38.6 ～ 316 | 38.6 ～ 318 | 45 ～ 305.9 | 40 ～ 217.5 | 46.8 ～ 328.2 | 97.4 ～ 309.6 | 42 ～ 309.5 |
| Farbe | Schwarz | - | - | Grau | Transparent | Schwarz | - | Schwarz | Grau | Transparent | elfenbeinfarben | Transparent | Grau | Grau | Metallfarbe | - | Grau | Grau | Weiß | Schwarz | Transparent | - | Transparent | Transparent | Dunkelbraun | Grau | Weiß | Metallfarbe | Grau | Grau | Weiß | Grau | Grau | Grau | - | Weiß | Transparent | Transparent | Grau | Grau | Metallfarbe | elfenbeinfarben | Schwarz | Grau | Weiß |
| Zulässige Flüssigkeit | Luft | Luft | Luft | Luft | Pulver / Getreide / Luft | Pulver / Getreide / Luft / Papierschnipsel | Chemikalien / Luft / Funken | Pulver / Luft | Pulver / Getreide / Luft | Luft | Luft / Ölnebel | Pulver / Getreide / Luft | Luft / Funken | - | Luft | Luft | Luft | Luft | Luft | Pulver / Getreide / Papierschnipsel | Pulver / Luft | Luft | Pulver / Getreide / Luft | Getreide / Luft | Luft | Luft | Luft | Luft | Luft | Luft | Luft | Maschinenöl / Schmiermittel / Luft / Ölnebel | Luft | Luft / Funken | Luft | Luft | Luft | Pulver / Luft | Luft | Luft | Luft | Luft | Pulver / Getreide / Papierschnipsel | Luft | Luft |
| Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa) | 0.002 ～ 0.018 | 0.02 | 0.002 ～ 0.06 | 0.003 ～ 0.008 | 0.04 ～ 0.08 | 0.03 | 0.006 ～ 0.027 | - | 0.02 | 0.04 | 0.04 | 0.01 ～ 0.06 | 0.007 | - | 0.0092 ～ 0.015 | 0.001 | 0.02 ～ 0.06 | - | - | 0.005 ～ 0.03 | 0.02 ～ 0.06 | 0.007 ～ 0.02 | 0.01 ～ 0.06 | 0.02 ～ 0.06 | 0.002 ～ 0.018 | 0.0052 ～ 0.04 | - | - | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.02 ～ 0.1 | 0.01 ～ 0.06 | 0.007 | 0.007 | 0.01 | 0.004 | 0.01 ～ 0.04 | 0.01 ～ 0.04 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.007 ～ 0.02 | 0.02 ～ 0.1 | 0.005 ～ 0.03 | - | - |
Loading...
Filtern nach:
Stock
-
- Nur Lagerteile anzeigen
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Werkstoff
-
Nutzung Schneidservice
- Enthalten
- Keine
-
Eigenschaften
-
ID d(Ø)
- 10
- 11
- 13
- 13.5
- 14
- 16
- 16.7
- 17
- 18
- 19.5
- 20
- 21
- 24
- 25
- 25.4
- 25.5
- 28
- 30
- 31
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38,5±0,5
- 38.1
- 39
- 40
- 41
- 42
- 42.7
- 43.7
- 44.5
- 46
- 48
- 50
- 50,5±1,0
- 50.6
- 50.8
- 50.9
- 51
- 51.2
- 51.5
- 52
- 52.5
- 53.0
- 53.5
- 55
- 60
- 60.5
- 62.0
- 62.4
- 63
- 63.5
- 64
- 64,5±1,0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.1
- 76.2
- 76.4
- 76.5
- 77
- 78.0
- 79
- 80
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 94
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.2
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.7
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 129
- 130
- 130.5
- 131.4
- 139.5
- 140
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 153
- 154
- 155
- 160
- 165
- 175
- 176.5
- 176.6
- 177
- 177.8
- 178
- 179
- 180
- 196.0
- 200
- 202
- 203
- 203.2
- 203.6
- 203.7
- 204
- 204.1
- 205
- 208
- 211.0
- 225
- 227.0
- 228
- 228.6
- 229
- 230
- 250
- 252
- 252.1
- 253
- 253,0±2,0
- 253.5
- 254
- 257
- 275
- 278
- 282
- 294.0
- 300
- 302
- 303
- 303.5
- 304
- 307
- 325
- 350
- 357
- 359.0
- 375
- 400
- 408
- 410.0
- 450
- 500
- 512.0
-
Aussen - D(Ø)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 36
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41
- 41.5
- 42.0
- 42.6
- 42.9
- 44,5±1,0
- 44.5
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 47.8
- 48.0
- 53
- 53.5
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 56.8
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59,8±1,5
- 59.8
- 59.9
- 60
- 60.2
- 60.4
- 60.8
- 61.0
- 61.2
- 61.8
- 62
- 64
- 65
- 68
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 72.7
- 73.0
- 73,2±1,5
- 73.2
- 73.6
- 74.7
- 75
- 76
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.4
- 85.8
- 85.9
- 86.4
- 86.8
- 87
- 87.2
- 87.6
- 87.8
- 89
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 99.6
- 100
- 100.3
- 101.4
- 102
- 104
- 105
- 105.3
- 105.5
- 106
- 106.8
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.2
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 113.2
- 113.6
- 114
- 114.6
- 117
- 118.0
- 119
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 132.2
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139
- 139.3
- 139.7
- 139.9
- 140.6
- 142
- 144
- 145
- 152
- 155
- 155.5
- 155.7
- 156
- 157
- 157.2
- 158
- 159
- 160
- 162
- 163.0
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 166.8
- 167
- 168.8
- 169
- 170
- 177.8
- 180
- 180.7
- 182
- 182.2
- 182.8
- 183
- 184
- 187
- 187.8
- 189
- 190.6
- 191.0
- 192.4
- 205
- 205.5
- 205.7
- 206
- 207
- 207.2
- 208
- 209.5
- 211.0
- 211.5
- 212
- 214
- 215
- 215.8
- 216.0
- 216.5
- 216.8
- 217
- 217.1
- 217.2
- 217.5
- 219
- 220
- 223
- 230
- 230.7
- 237
- 239
- 240.4
- 240.8
- 243.1
- 255
- 255.9
- 256
- 257
- 258.5
- 259.5
- 260
- 261.0
- 262
- 263,9±2,5
- 263.9
- 264
- 265.0
- 265.7
- 266.2
- 268.5
- 271.0
- 274.2
- 280
- 292.6
- 305.9
- 306
- 306.5
- 307
- 307.5
- 308
- 309.5
- 309.6
- 310
- 311
- 312
- 314
- 315.6
- 316.0
- 316.4
- 318
- 320.0
- 322.0
- 328.2
- 332
- 357
- 367.0
- 378.5
- 407
- 418.0
- 431.0
- 458
- 469.0
- 520.0
- 532.0
-
Farbe
-
Zulässige Flüssigkeit
-
Max. zulässiger Druck (unterhalb der Umgebungstemperatur)(MPa)
- 0.0005
- 0.001
- 0.002
- 0.003
- 0.004
- 0.005
- 0.0052
- 0.006
- 0.00689
- 0.007
- 0.0072
- 0.008
- 0.0082
- 0.009
- 0.0092
- 0.00971
- 0.00989
- 0.01
- 0.011
- 0.0115
- 0.012
- 0.01229
- 0.013
- 0.014
- 0.01479
- 0.015
- 0.01539
- 0.0157
- 0.016
- 0.017
- 0.018
- 0.0185
- 0.02
- 0.02059
- 0.021
- 0.022
- 0.023
- 0.025
- 0.027
- 0.029
- 0.02941
- 0.03
- 0.032
- 0.033
- 0.0355
- 0.04
- 0.05
- 0.051
- 0.056
- 0.06
- 0.06078
- 0.062
- 0.07
- 0.07647
- 0.078
- 0.08
- 0.08824
- 0.09
- 0.1
Suchergebnisse durch Herstellerauswahl einschränken
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.