THK Profilschienenführungen mit Wälzkörpern
Eingeschränkte Suche durch Präzisierung Ausführung - Führungswagen
-
-
Kurz -
-
Groß -
-
Extralang -
?* Informationen zur Lieferzeit und Preisen
-
Miniatur-Profilschienenführungen / SRS / Wagendimensionen wählbar
THK
A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage -
Führungswagen für Profilschienen / SR / Kugelumlauf / Wagendimensionen wählbar
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 46.67 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Profilschienenführungen / SHW / Material wählbar / breiter Wagen
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage -
Führungswagen für Profilschienen / SSR / Wagendimensionen wählbar
THK
An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 51.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
Profilschienenführungen / HSR / Material wählbar / Wagendimensionen wählbar
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Profilschienen / SR
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· Palm of the two shafts- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage 
Miniatur-Profilschienenführungen / SHS-Typ
THK
A best selling THK product. The SHS series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage Profilschienenführungen / SR / Material wählbar / Wagendimensionen wählbar
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage 
Profilschienenführungen / HRW / Material wählbar / breiter Wagen
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Profilschienenführungen / SHS / Material wählbar / Wagendimensionen wählbar
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Führungswagen für Profilschienen / HRW / Material wählbar / Kugelumlauf / breiter Wagen, Wagendimensionen wählbar
THK
An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 104.99 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
Profilschienen / HSR / Material wählbar
THK
No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage 
Miniatur-Profilschienenführungen / RSR / rostfreier Stahl / Wagendimensionen wählbar
THK
A miniature type with a compact structure. Can be mounted in space saving areas.
[Features]
· RSR/RSR-W type circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with two rows that have been precision ground into the LM block and LM rail.
· The ball circulates and moves in the compact structure, which allows it to move on an infinite straight line with no restrictions on stroke.
· The LM block has been designed into a shape that allows for rigidity to be obtained when there is limited space, and is combined with a large diameter ball in order to obtain high rigidity in all directions.
· Ultra compact: A compact linear system that is highly reliable because there is no mis
alignment in the cages that are prone to problems in the ball sliding limited stroke type or in the cross roller guide.
Can withstand load in all directions: Incurs load in all directions, and can adequately use a single shaft guide for small moment loads.
· In particular, the RSR-W type that has an increased number of effective balls to increase the LM rail width to achieve increased rigidity against moments, and two parallel linear brush shafts can be used to achieve a linear motion with excellent durability and a compact size.
· Stainless steel LM block, LM rail, and LM rail are all compatible with stainless steel.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 28 Arbeitstage Führungswagen für Profilschienen / SHS / großer Wagen, Wagendimensionen wählbar
THK
An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-section- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 72.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
Profilschienen / SSR / Material wählbar
THK
No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage Profilschienen / SHS
THK
No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage Profilschienenführungen / SSR / Material wählbar / Wagendimensionen wählbar
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage 
Profilschienenführungen / HSR-M1-Modell
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- 2D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Führungswagen für Profilschienen / HSR / Material wählbar / Kugelumlauf / großer Wagen, Wagendimensionen wählbar
THK
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 64.07 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
Führungswagen für Profilschienen / SHW / breiter Wagen, Wagendimensionen wählbar
THK
An individual block from the THK LM guide SHW series. Extremely useful for sudden design changes and when performing maintenance.- Mengenrabatt
- 2D / 3D CAD Daten verfügbar
ab∗ ： 125.20 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
Miniatur-Profilschienenführungen / SRS-G / Wagendimensionen wählbar
THK
A full-ball type with not ball retainer on the SRS type.
[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Profilschienen / SHW / breite Schiene
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 19 Arbeitstage Profilschienenführungen / HSR-Modell / Kugelkette
THK
A best selling THK product. The HSR series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage Profilschienen / HRW / Material wählbar / breite Schiene
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HRW12 and 14LR types) each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) where there is action on the M block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage 
Miniatur-Schienenführungen mit Kugelkäfigen / EPF-Typ / hubbegrenzt / Senkbohrungen, Gewindebohrungen
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 24 Arbeitstage 
Profilschienenführungen / SR-M1-Typ
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.- 2D CAD Daten verfügbar
Minimum Lieferzeit ： 35 Arbeitstage Miniatur-Profilschienenführungen / SRS-Typ
THK
A best selling THK product. The SRS series is designed for installation to locations in which space is at a premium.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage 
Profilschienenführungen / SR-Typ / standard, breit, kurz - breit
THK
[Eigenschaften]
Kompakte Ausführung mit geringer Querschnittshöhe, ideal für horizontale Führungen, da die Kontaktfläche der Kugel radiale Belastungen aufnimmt
Da es sich um eine Ausführung mit automatischer Einstellung handelt, die die Parallelität der beiden Achsen und den Genauigkeitsfehler des Niveaus angemessen kompensieren kann, können hohe Präzision und glatte Bewegungen erzielt werden
Der Rücklaufbereich jeder Kugel ist so gestaltet, dass die Kugeln gleichmäßig durch den Führungsteil der Endplatte laufen, so dass eine geräuscharme Rollbewegung erreicht wird
Auch im Hinblick auf Vorspannung und exzentrisch Belastung ist der Differenzschlupf der Kugel gering; sie weist eine ausgezeichnete Abriebfestigkeit auf und es ist möglich, die Genauigkeit über eine lange Zeit aufrechtzuerhalten
LM-Wagen, LM-Schienen und Kugeln können mit rostfreiem Stahl verwendet werden
Auch wenn der LM-Wagen aus der LM-Schiene gezogen wird, verhindert die Halteplatte das Herunterfallen der Kugel- 2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage Warenzeichen Artikelserie CAD ab∗ Minimum Lieferzeit ： Ausführung - Führungswagen Ausführung - Schiene Breite - Führungsschiene(mm) [H] Höhe - Montage(mm) Werkstoff Anzahl Führungswagen [L] Länge - Schiene(mm) Vorspannung Genauigkeit Nominale Teilenummer Kugelausrichtung Kugelkäfige Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm) Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm) Durchmesser Befestigungsbohrung - Führungswagen Abstand Befestigungsbohrung - Schiene(mm) Durchmesser Befestigungsbohrung - Schiene Set / Einzelteile 
Warenzeichen THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
Artikelserie Miniatur-Profilschienenführungen / SRS / Wagendimensionen wählbar
Führungswagen für Profilschienen / SR / Kugelumlauf / Wagendimensionen wählbar
Profilschienenführungen / SHW / Material wählbar / breiter Wagen
Führungswagen für Profilschienen / SSR / Wagendimensionen wählbar
Profilschienenführungen / HSR / Material wählbar / Wagendimensionen wählbar
Profilschienenführungen / SR / Material wählbar / Wagendimensionen wählbar
Profilschienenführungen / HRW / Material wählbar / breiter Wagen
Profilschienenführungen / SHS / Material wählbar / Wagendimensionen wählbar
Miniatur-Profilschienenführungen / RSR / rostfreier Stahl / Wagendimensionen wählbar
Führungswagen für Profilschienen / SHS / großer Wagen, Wagendimensionen wählbar
Profilschienenführungen / SSR / Material wählbar / Wagendimensionen wählbar
Führungswagen für Profilschienen / SHW / breiter Wagen, Wagendimensionen wählbar
Miniatur-Profilschienenführungen / SRS-G / Wagendimensionen wählbar
Profilschienenführungen / SR-Typ / standard, breit, kurz - breit
CAD - 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D
- 2D / 3D
- 2D / 3D
ab∗ -
46.67 €
*Stückpreis Standardkonfiguration
Mengenrabatt
-
51.04 €
*Stückpreis Standardkonfiguration
Mengenrabatt
-
-
-
-
-
-
104.99 €
*Stückpreis Standardkonfiguration
Mengenrabatt
-
-
72.04 €
*Stückpreis Standardkonfiguration
Mengenrabatt
-
-
-
-
64.07 €
*Stückpreis Standardkonfiguration
Mengenrabatt
125.20 €
*Stückpreis Standardkonfiguration
Mengenrabatt
-
-
-
-
-
-
-
-
Minimum Lieferzeit ： 19 Arbeitstage 5 Arbeitstage 19 Arbeitstage 5 Arbeitstage 19 Arbeitstage 7 Arbeitstage 7 Arbeitstage 19 Arbeitstage 19 Arbeitstage 19 Arbeitstage 5 Arbeitstage 7 Arbeitstage 28 Arbeitstage 5 Arbeitstage 7 Arbeitstage 7 Arbeitstage 19 Arbeitstage 19 Arbeitstage 5 Arbeitstage 5 Arbeitstage 19 Arbeitstage 19 Arbeitstage 7 Arbeitstage 7 Arbeitstage 24 Arbeitstage 35 Arbeitstage 7 Arbeitstage 7 Arbeitstage Ausführung - Führungswagen Standard / Breit / Lang Standard / Breit Breit Standard / Breit Standard / Breit - Standard / Breit Standard / Breit / Breit Kurz Breit Standard / Breit Breit - Standard Standard / Breit - - Standard / Breit Standard / Breit Standard / Breit Breit Standard / Breit - Standard - Standard Standard / Breit / Breit Kurz Breit Standard / Breit / Breit Kurz Ausführung - Schiene Standard / Breit Standard Breit Standard Standard Standard Standard Standard Breit Standard Breit Standard Standard Standard Standard Standard Standard Standard Standard Breit Standard / Breit Breit Standard Breit Standard Standard Breit Standard Breite - Führungsschiene(mm) 7 ～ 42 - 18 ～ 90 - 15 ～ 63 15 ～ 34 15 ～ 34 15 ～ 70 18 ～ 120 15 ～ 63 - 15 ～ 34 3 - 15 ～ 34 15 ～ 34 15 ～ 34 15 ～ 28 - - 9 ～ 42 37 ～ 69 15 ～ 34 33 ～ 42 7 ～ 15 15 ～ 34 18 ～ 42 15 ～ 20 [H] Höhe - Montage(mm) 6.5 ～ 25 - 12 ～ 50 - 28 ～ 90 24 ～ 48 24 ～ 55 24 ～ 85 12 ～ 60 24 ～ 90 - 24 ～ 48 4 - 24 ～ 48 24 ～ 48 24 ～ 48 24 ～ 45 - - 10 ～ 25 21 ～ 35 28 ～ 55 17 ～ 27 8 ～ 16 24 ～ 48 12 ～ 16 - Werkstoff Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl - Kohlenstoffstahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl Kohlenstoffstahl / Rostfreier Stahl - Rostfreier Stahl Kohlenstoffstahl - - Kohlenstoffstahl / Rostfreier Stahl Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Kohlenstoffstahl Rostfreier Stahl Kohlenstoffstahl Kohlenstoffstahl - Rostfreier Stahl Rostfreier Stahl Rostfreier Stahl Kohlenstoffstahl / Rostfreier Stahl Anzahl Führungswagen 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 - 1 / 2 / 3 / 4 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 - - 1 - - 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 - 1 / 2 / 3 / 4 - 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 - [L] Länge - Schiene(mm) 30 ～ 2000 - 38 ～ 3000 - 64 ～ 3000 73 ～ 3000 73 ～ 2920 47 ～ 3000 38 ～ 3000 71 ～ 3000 - 73 ～ 2920 - - 73 ～ 2920 73 ～ 2920 47 ～ 3000 67 ～ 1500 - - 32 ～ 2000 60 ～ 3000 73 ～ 2920 64 ～ 2920 33 ～ 110 47 ～ 1500 41 ～ 430 - Vorspannung Standard / Leichte Vorspannung Standard Standard / Leichte Vorspannung / Mittlere Vorspannung Standard Standard / Leichte Vorspannung / Mittlere Vorspannung Standard Standard Standard / Leichte Vorspannung / Mittlere Vorspannung Standard / Leichte Vorspannung / Mittlere Vorspannung A / Standard / Leichte Vorspannung / Mittlere Vorspannung Standard Standard - Standard Standard Standard Standard / Leichte Vorspannung Standard / Leichte Vorspannung / Mittlere Vorspannung Standard Standard Standard / Leichte Vorspannung Standard Standard Standard - Standard / Leichte Vorspannung / Mittlere Vorspannung Standard - Genauigkeit Standardklasse / Hohe Güte / Präzisionsklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse A / Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse Standardklasse - Standardklasse Standardklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse Standardklasse Standardklasse Standardklasse Standardklasse / Hohe Güte / Präzisionsklasse Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse Standardklasse - Nominale Teilenummer 5W ～ 25 15 ～ 35 12 ～ 50 15 ～ 35 15 ～ 65 15 ～ 35 15 ～ 35 15 ～ 70 12 ～ 60 15 ～ 65 17 ～ 35 15 ～ 35 3 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 30 15 ～ 35 21 ～ 35 9W ～ 25 21 ～ 35 15 ～ 35 17 ～ 27 7 ～ 15 15 ～ 35 9W ～ 15W 15 ～ 35 Kugelausrichtung Standard 4-reihig, rund 4-reihig, rund 4-reihig, rund 4-reihig, rund - 4-reihig, rund 4-reihig, rund 4-reihig, rund 4-reihig, rund 4-reihig, rund - Standard 4-reihig, rund - - 4-reihig, rund 4-reihig, rund 4-reihig, rund 4-reihig, rund Standard - 4-reihig, rund - 4-reihig, rund 4-reihig, rund Standard 4-reihig, rund Kugelkäfige Verfügbar NA Verfügbar Verfügbar NA - Verfügbar NA NA Verfügbar NA - NA Verfügbar - - Verfügbar NA NA Verfügbar NA - NA - Verfügbar NA Verfügbar NA Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm) 15 ～ 45 26 ～ 82 21 ～ 144 26 ～ 60 11.5 ～ 142 - 26 ～ 72 26 ～ 90 21 ～ 180 26 ～ 142 29 ～ 107 - - 26 ～ 72 - - 26 ～ 60 11.5 ～ 72 26 ～ 82 31 ～ 107 15 ～ 45 - 26 ～ 50 - 12 ～ 25 26 ～ 82 21 ～ 45 26 ～ 82 Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm) 10 ～ 35 26 ～ 50 12 ～ 80 26 ～ 50 18 ～ 120 - 26 ～ 72 26 ～ 90 12 ～ 80 26 ～ 120 15 ～ 60 - 5.5 26 ～ 72 - - 26 ～ 50 18 ～ 60 26 ～ 72 19 ～ 60 10 ～ 35 - 26 ～ 72 - 13 ～ 25 26 ～ 50 12 ～ 20 26 ～ 50 Durchmesser Befestigungsbohrung - Führungswagen 3 ～ 6 4 ～ 9 2.5 ～ 10 4 ～ 8 4 ～ 16 - 4 ～ 8.5 4 ～ 16 3 ～ 10.5 4 ～ 16 3.3 ～ 8 - 2 4 ～ 8.5 - - 4 ～ 8 4 ～ 10 4 ～ 10 4.4 ～ 8 3 ～ 6 - 4 ～ 8 - 2 ～ 3 4 ～ 9 3 ～ 4 4 ～ 9 Abstand Befestigungsbohrung - Schiene(mm) 20 ～ 60 60 ～ 80 40 ～ 80 60 ～ 80 60 ～ 150 60 ～ 80 60 ～ 80 60 ～ 150 40 ～ 105 60 ～ 150 40 ～ 80 60 ～ 80 10 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 50 ～ 80 20 ～ 60 - 60 ～ 80 40 ～ 60 15 ～ 40 60 ～ 80 30 ～ 40 60 ～ 80 Durchmesser Befestigungsbohrung - Schiene 3 ～ 7 3.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 18 3.5 ～ 9 4.5 ～ 9 3.5 ～ 18 4.5 ～ 11 4.5 ～ 18 4.5 ～ 7 4.5 ～ 9 2 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 7 3.5 ～ 7 - 4.5 ～ 9 4.5 2.4 ～ 3.5 3.5 ～ 9 3.5 ～ 4.5 4.5 ～ 9 Set / Einzelteile Set nur Führungswagen Set nur Führungswagen Set Nur Führungsschiene Set Set Set Set nur Führungswagen Nur Führungsschiene Set nur Führungswagen Nur Führungsschiene Nur Führungsschiene Set Set nur Führungswagen nur Führungswagen Set Nur Führungsschiene Set Nur Führungsschiene Set Set Set Set Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung - Schiene
-
Breite - Führungsschiene(mm)
-
[H] Höhe - Montage(mm)
-
Werkstoff
Bei Druckstück sind Führungswagen und Schiene aus demselben Werkstoff.
-
Anzahl Führungswagen
-
[L] Länge - Schiene(mm)
- 25
- 35
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 200
- 215
- 220
- 230
- 235
- 240
- 245
- 255
- 260
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 390
- 395
- 400
- 420
- 430
- 440
- 445
- 460
- 470
- 495
- 510
- 520
- 545
- 550
- 560
- 570
- 580
- 590
- 595
- 600
- 620
- 630
- 640
- 645
- 670
- 680
- 695
- 700
- 720
- 760
- 800
- 820
- 840
- 880
- 920
- 940
- 1000
- 1040
- 1060
- 1080
- 1120
- 1160
- 1180
- 1200
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1440
- 1480
- 1520
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 2000
[30-3000/1mmTeile]
-
Vorspannung
-
Genauigkeit
-
Nominale Teilenummer
-
Kugelausrichtung
-
Kugelkäfige
-
Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm)
-
Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm)
-
Durchmesser Befestigungsbohrung - Führungswagen
-
Abstand Befestigungsbohrung - Schiene(mm)
-
Durchmesser Befestigungsbohrung - Schiene
-
Set / Einzelteile
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (35)
- INA (115)
- THK (28)
- SCHNEEBERGER (22)
- SKF (17)
- BOSCH REXROTH (11)
- IKO (6)
- OZAK (6)
- SBC (6)
- GANTER (3)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Eingeschränkte Suche durch Präzisierung der Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 4 Tage oder weniger
- 5 Tage oder weniger
- 6 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 9 Tage oder weniger
- 10 Tage oder weniger
- 11 Tage oder weniger
- 12 Tage oder weniger
Weitere Kategorien aus dem Produktbereich Profilschienenführungen mit Wälzkörpern
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.