• Aufgrund des Taifuns in Japan / Tokio kann es bei einigen Produkten zu Lieferverzögerungen kommen. Wir bedanken uns für Ihr Verständnis.
  • Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.

Hartmetall-Rechteckschaftfräser(Coating:Non-Coated)

Suche durch Präzisierung der Kategorie der unteren Klasse

Daten, die angezeigt werden sollen
30
45
60
Sortieren nach:
Lieferzeit
  • Alle Produkte
  • Versand am selben Tag
  • 3 Tag oder weniger
  • 4 Tag oder weniger
  • 5 Tag oder weniger
  • 6 Tag oder weniger
  • 7 Tag oder weniger
  • 8 Tag oder weniger
  • 10 Tag oder weniger
  • 11 Tag oder weniger
  • 12 Tag oder weniger
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Spezifikationen
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

    Standard-Vierkant-Schaftfräser, 2-schneidig

      2-schneidig kurze Ausführung MG-EDS

        AL-3LS-Langschaftfräser für Aluminium (Unter-Schaft)

          ALZ345-Schwerschnitt-Schaftfräser für Aluminium, hocheffizient

            4-schneidig, lange Ausführung MG-EML

              SMEZ120 CBN-Mikro-Kante Z

                CBN-Vierkantfräser SSE600

                  BED2-Vierkantfräser, gelötet, 2-schneidig, unbeschichtet

                    Carbide square end mill, 2-flute / 2D Flute Length (short) model

                      Carbide square end mill, 2-flute / 3D Flute Length (regular) model

                        Carbide square end mill, 4-flute / 2D Flute Length (short) model

                          Carbide square end mill, 4-flute / 3D Flute Length (regular) model

                            Carbide square end mill, 4-flute / 4D Flute Length (long) model

                              Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

                                Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

                                  Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                                    Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                                      Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

                                        Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

                                          Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

                                            Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                                              Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

                                                Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

                                                  Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

                                                    Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

                                                      Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

                                                        Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

                                                          Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model

                                                            Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model

                                                              Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

                                                                Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model

                                                                  Carbide Blade Neck Relief End Mill, 2-Flute / Short Model

                                                                    Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model

                                                                      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

                                                                        Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

                                                                          Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

                                                                            Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

                                                                              Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

                                                                                Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                                                                                  Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

                                                                                    2-schneidig, extralange Ausführung MG-EXDL

                                                                                      Für 2-schneidige Passfedernut (OH1) MG-EKD

                                                                                        Für  2-schneidige Passfedernut (OL1) MG-EKD

                                                                                          2-schneidig, kurze Ausführung (für Gusseisen) WK-EDS

                                                                                            2-schneidig, mittlere Ausführung MG-EDN

                                                                                            Warenzeichen

                                                                                            ATOM

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            OKAZAKI SEIKO

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            Artikelserie

                                                                                            Standard-Vierkant-Schaftfräser, 2-schneidig

                                                                                            2-schneidig kurze Ausführung MG-EDS

                                                                                            AL-3LS-Langschaftfräser für Aluminium (Unter-Schaft)

                                                                                            ALZ345-Schwerschnitt-Schaftfräser für Aluminium, hocheffizient

                                                                                            4-schneidig, lange Ausführung MG-EML

                                                                                            SMEZ120 CBN-Mikro-Kante Z

                                                                                            CBN-Vierkantfräser SSE600

                                                                                            BED2-Vierkantfräser, gelötet, 2-schneidig, unbeschichtet

                                                                                            Carbide square end mill, 2-flute / 2D Flute Length (short) model

                                                                                            Carbide square end mill, 2-flute / 3D Flute Length (regular) model

                                                                                            Carbide square end mill, 4-flute / 2D Flute Length (short) model

                                                                                            Carbide square end mill, 4-flute / 3D Flute Length (regular) model

                                                                                            Carbide square end mill, 4-flute / 4D Flute Length (long) model

                                                                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

                                                                                            Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

                                                                                            Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

                                                                                            Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

                                                                                            Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

                                                                                            Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model

                                                                                            Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model

                                                                                            Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

                                                                                            Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model

                                                                                            Carbide Blade Neck Relief End Mill, 2-Flute / Short Model

                                                                                            Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model

                                                                                            Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

                                                                                            Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

                                                                                            Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

                                                                                            Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model

                                                                                            Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model

                                                                                            2-schneidig, extralange Ausführung MG-EXDL

                                                                                            Für 2-schneidige Passfedernut (OH1) MG-EKD

                                                                                            Für 2-schneidige Passfedernut (OL1) MG-EKD

                                                                                            2-schneidig, kurze Ausführung (für Gusseisen) WK-EDS

                                                                                            2-schneidig, mittlere Ausführung MG-EDN

                                                                                            ab

                                                                                            43.45 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            35.95 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            67.76 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            36.15 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            58.86 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            176.72 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            120.84 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            114.57 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            18.35 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            34.57 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            39.96 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            45.66 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            17.88 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            71.85 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            77.17 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            18.75 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            20.50 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            31.41 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            18.37 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            -

                                                                                            -

                                                                                            -

                                                                                            -

                                                                                            24.28 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            10.72 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            12.84 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            22.12 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            63.81 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            53.18 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            53.18 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            102.92 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            50.87 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Minimum Lieferzeit 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 6 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage
                                                                                            Spezifikationen
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • S (Short)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 4 Flutes
                                                                                                            • S (Short)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 4 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 4 Flutes
                                                                                                            • L (Long)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • B (Stub)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • S (Short)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • L (Long)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • EXL (Extra Long)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • S (Short)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 4 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • B (Stub)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • B (Stub)
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 3 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Copper
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Graphite
                                                                                                            • 2 Flutes
                                                                                                            • L (Long)
                                                                                                            • Non-Coated
                                                                                                            • Graphite
                                                                                                            • 4 Flutes
                                                                                                            • L (Long)
                                                                                                            • Non-Coated
                                                                                                            • Resin
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Resin
                                                                                                            • 2 Flutes
                                                                                                            • EXL (Extra Long)
                                                                                                            • Non-Coated
                                                                                                            • Resin
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • Resin
                                                                                                            • 2 Flutes
                                                                                                            • B (Stub)
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • S (Short)
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • General Steel
                                                                                                            • 4 Flutes
                                                                                                            • S (Short)
                                                                                                            • General Steel
                                                                                                            • 4 Flutes
                                                                                                            • R (Regular)
                                                                                                            • Non-Coated
                                                                                                            • General Steel
                                                                                                            • 2 Flutes
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                            • Non-Coated
                                                                                                            • Aluminum
                                                                                                            • 2 Flutes
                                                                                                                      Blade diameter (D)(φ)1 ~ 121 ~ 255 ~ 121 ~ 123 ~ 250.03 ~ 0.10.2 ~ 120 ~ 500.2 ~ 120.2 ~ 121 ~ 202 ~ 201 ~ 121 ~ 120.5 ~ 200.5 ~ 203 ~ 123 ~ 121 ~ 120.5 ~ 200.5 ~ 125 ~ 226.2 ~ 16.25 ~ 200.5 ~ 201 ~ 122 ~ 120.3 ~ 160.3 ~ 121 ~ 100.3 ~ 66 ~ 126 ~ 122 ~ 206 ~ 126 ~ 123.01 ~ 19.990.5 ~ 200.5 ~ 203 ~ 123 ~ 123 ~ 123 ~ 1214 ~ 503 ~ 12
                                                                                                                      work materialgeneral steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎]Aluminum[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○]Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                                                                      Blade length (ℓ)(mm)3 ~ 252.5 ~ 457.5 ~ 181.5 ~ 1812 ~ 670.03 ~ 0.10.08 ~ 0.432 ~ 630.4 ~ 240.6 ~ 362 ~ 405 ~ 604 ~ 481.5 ~ 181 ~ 401.5 ~ 605 ~ 4815 ~ 602 ~ 241.5 ~ 601.5 ~ 289 ~ 339 ~ 2415 ~ 451.5 ~ 605 ~ 6010 ~ 600.9 ~ 481.5 ~ 483 ~ 200.6 ~ 15--3 ~ 60--3.5 ~ 481 ~ 401.5 ~ 6015 ~ 6020 ~ 905 ~ 165 ~ 1625 ~ 6010 ~ 34
                                                                                                                      Number of flutes(sheet)2233416222444322223343332242222222 ~ 444222222222
                                                                                                                      TypeSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareRoughingSquareSquareSquareSquareSquareSquareLong-Neck SquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquareSquare
                                                                                                                      CoatingNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-Coated
                                                                                                                      Shank diameter (d)(mm)4 ~ 124 ~ 254 ~ 104 ~ 126 ~ 254420 ~ 423 ~ 123 ~ 124 ~ 204 ~ 204 ~ 124 ~ 124 ~ 204 ~ 206 ~ 126 ~ 124 ~ 124 ~ 204 ~ 124 ~ 206 ~ 166 ~ 204 ~ 204 ~ 124 ~ 123 ~ 163 ~ 121 ~ 103 ~ 66 ~ 126 ~ 124 ~ 206 ~ 126 ~ 126 ~ 204 ~ 204 ~ 206 ~ 126 ~ 126 ~ 126 ~ 1216 ~ 426 ~ 12
                                                                                                                      Overall Length (L)(mm)40 ~ 7540 ~ 12080 ~ 15045 ~ 8050 ~ 1405049 ~ 53115 ~ 16035 ~ 7540 ~ 8540 ~ 11045 ~ 13045 ~ 10040 ~ 8040 ~ 11040 ~ 13060 ~ 10060 ~ 13040 ~ 8040 ~ 13040 ~ 8080 ~ 20080 ~ 18057 ~ 10050 ~ 13075 ~ 20075 ~ 20045 ~ 11040 ~ 11065 ~ 18050 ~ 8045 ~ 7560 ~ 8540 ~ 13045 ~ 7560 ~ 8540 ~ 10540 ~ 11040 ~ 13060 ~ 13060 ~ 15045 ~ 7545 ~ 7585 ~ 15250 ~ 90
                                                                                                                      Underneck length (ℓ1)(mm)---3 ~ 36--0.4 ~ 5-17 ~ 4523 ~ 5517 ~ 7323 ~ 9229 ~ 703 ~ 3617 ~ 7323 ~ 9229 ~ 70-17 ~ 5023 ~ 9222 ~ 50--20 ~ 70-10 ~ 8520 ~ 85---2.5 ~ 52--------------
                                                                                                                      Machining ApplicationPlane / SidePlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / GroovePlane / GroovePlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Inclined CutsPlane / Side / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined Cuts / CountersinkingPlane / Side / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Inclined CutsPlane / Side / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / GroovePlane / Side / GroovePlane / Side / Groove / Inclined CutsPlane / SidePlane / SidePlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts
                                                                                                                      Blade tip shapeSharp EdgeSharp Edge / With LeadWith LeadWith LeadSharp Edge / With LeadSharp EdgeWith LeadC planeSharp Edge / With LeadSharp Edge / With LeadSharp Edge / With LeadSharp Edge / With LeadSharp Edge / With LeadWith LeadSharp EdgeSharp EdgeSharp EdgeSharp EdgeWith LeadWith LeadSharp EdgeMicro RMicro RMicro RSharp EdgeSharp EdgeSharp EdgeSharp Edge-Sharp EdgeSharp EdgeWith LeadWith LeadWith LeadWith LeadWith LeadSharp Edge / With Lead---With LeadWith LeadWith LeadWith LeadSharp Edge
                                                                                                                      Torsion Angle (θ)-Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Weak torsion (15 to 25˚)No torsionStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Weak torsion (15 to 25˚)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Weak torsion (15 to 25˚)Standard torsion (30-40°)

                                                                                                                      Loading...

                                                                                                                      Kategorien beziehen sich auf Hartmetall-Rechteckschaftfräser