• 10 Millionen Bauteile
  • 30.000 Lager-Produkte am gleichen Tag versandbereit
  • Faire Preise

Öffnungszeiten: Montag-Donnerstag von 8:00-17:00 Uhr, Freitag von 8:00-16:00 Uhr(MEZ).

Kategorie- oder
Herstellersuche

Kategoriesuche
Mechanische Komponenten
Schrauben, Bolzen, Scheiben, Muttern
Halbzeuge
Kabel und Steckverbindungen
Steuerungstechnik
Spanende Werkzeuge
Produktionstechnik und Fertigungstechnik
Verpackungstechnik und Lagerungstechnik
Arbeitsschutz, Hygiene, Bürobedarf
Laborbedarf, Reinraumtechnik
Komponenten für den Stanzwerkzeugbau
Komponenten für den Spritzgussformenbau

Herstellersuche
Herstellerliste

Schrupp-Schaftfräser (HSS)(Seite2)

  • Daten, die angezeigt werden sollen
    30
    45
    60
  • Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tage oder weniger
  • 4 Tage oder weniger
  • 5 Tage oder weniger
  • 6 Tage oder weniger
  • 32 Tage oder weniger
  • 33 Tage oder weniger
  • Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

    Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

    MISUMI

    4 types that can be selected from the short to long shank according to the workpiece

    • Mengenrabatt
    • Non-Coated
    • 4 Flutes
    • L (Long)
    ab
    40.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing Extra Long Type, EX-REXL

    Roughing Extra Long Type, EX-REXL

    OSG

    Heavy Machining Roughing End Mill Super Long-Blade Series

    ab
    160.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Nick for Aluminum

    Alpha Nick for Aluminum

    SANKO MFG

    Suitable for roughing process of aluminum material. Up to 1.5 D of grooving is possible.

    ab
    26.78€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX Roughing End Mills, Medium, SGFREM

    SG-FAX Roughing End Mills, Medium, SGFREM

    NACHI(FUJIKOSHI)

    Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

    ab
    61.56€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

    AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

    MISUMI

    The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!

    • Mengenrabatt
    • AS
    • 4 Flutes
    • L (Long)
    ab
    41.88€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Best Cut End Mills (Multi-Flute Long Type) BKML

    Best Cut End Mills (Multi-Flute Long Type) BKML

    OSG

    Series for high speed steel roughing, semi-finishing.

    ab
    103.80€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (Roughing Long-Shank Short Type), EX-LS-REES

    End Mill (Roughing Long-Shank Short Type), EX-LS-REES

    OSG

    Heavy Machining Roughing End Mill Long Shank Series

    • Mengenrabatt
    ab
    42.36€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TIN Coated (Roughing Short Fine Pitch Shape) EX-LS-RESF

    TIN Coated (Roughing Short Fine Pitch Shape) EX-LS-RESF

    OSG

    High speed steel roughing end mill.

    ab
    38.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Roughing Long Type, EX-REEL

    Roughing Long Type, EX-REEL

    OSG

    Heavy Machining Roughing End Mill Long-Blade Series

    • Mengenrabatt
    ab
    48.86€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated S Tech Alpha Nick Regular Blade

    S Coated S Tech Alpha Nick Regular Blade

    SANKO MFG

    Semi-fine pitch type roughing end-mill with TICN coating. Can perform machining of hard-to-cut materials and extended continuous machining. Regular flute length for diverse machining.

    ab
    52.27€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM, Slim-Shank Fine-Pitch Type, VSS-XPM-RESF

    XPM, Slim-Shank Fine-Pitch Type, VSS-XPM-RESF

    OSG

    Slim shank roughing end mills; shank diameter is 1 mm smaller than blade diameter. Can freely adjust the extension and length.

    • Mengenrabatt
    ab
    82.91€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM End Mill (Roughing, Long Shank, Fine Pitch, Short Type), LS-XPM-RESF

    XPM End Mill (Roughing, Long Shank, Fine Pitch, Short Type), LS-XPM-RESF

    OSG

    Base Material Adopted Powdered High Speed Steel XPM Luffing. Flute with excellent chip control.

    ab
    58.08€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM High Helix, with Nick, Short Type, V-XPM-NHS

    XPM High Helix, with Nick, Short Type, V-XPM-NHS

    OSG

    Chips are suitable separated by nicks. Demonstrates outstanding effectiveness in groove roughing of stainless steel and other workpieces.

    ab
    46.36€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tuf Nick Gold End Mills (Short Type) TFGS

    Tuf Nick Gold End Mills (Short Type) TFGS

    OSG

    Series for high speed steel roughing, semi-finishing.

    • Mengenrabatt
    ab
    37.55€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Fine Pitch Long Blade

    S Coated Fine Pitch Long Blade

    SANKO MFG

    Fine pitch type roughing end-mill with TICN coating. Can reduce cutting stock when finishing. Long flute length for deep carving.

    ab
    89.28€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Alpha Nick Long Blade

    S Coated Alpha Nick Long Blade

    SANKO MFG

    Standard pitch type roughing end-mill with TICN coating. Long flute length for a wide range of machining and deep carving.

    ab
    108.17€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Alpha Nick Hard Type

    S Coated Alpha Nick Hard Type

    SANKO MFG

    Hard pitch type roughing end-mill with TICN coating. Suitable for heavy cutting and grooving.

    ab
    41.61€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Flat Nick, Short Flute

    Alpha Flat Nick, Short Flute

    SANKO MFG

    Flat nick type roughing end-mill. Can perform semi-finishing.

    ab
    42.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

    AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

    MISUMI

    High-speed steel roughing end mill that achieves both the machining performance and low price

    • Mengenrabatt
    • AS
    • 3 Flutes
    • S (Short)
    ab
    27.33€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

    Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

    MISUMI

    4 types that can be selected from the short to long shank according to the workpiece

    • Mengenrabatt
    • Non-Coated
    • 4 Flutes
    • R (Regular)
    ab
    27.58€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Best Cut End Mills (Multi-Flute Short Type) BKMS

    Best Cut End Mills (Multi-Flute Short Type) BKMS

    OSG

    Series for high speed steel roughing, semi-finishing.

    ab
    88.73€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • End Mill (Roughing Medium Type), EX-REEN

    End Mill (Roughing Medium Type), EX-REEN

    OSG

    Heavy Machining Roughing End Mill Medium-Blade Series

    • Mengenrabatt
    ab
    35.85€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rough and Finish End Mills (Short Type) RFES

    Rough and Finish End Mills (Short Type) RFES

    OSG

    Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.

    • Mengenrabatt
    ab
    37.25€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rough and Finish End Mills RFE

    Rough and Finish End Mills RFE

    OSG

    Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.

    • Mengenrabatt
    ab
    74.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Fine Pitch Regular Blade

    S Coated Fine Pitch Regular Blade

    SANKO MFG

    Fine pitch type roughing end-mill with TICN coating. Can reduce cutting stock when finishing. Regular flute length for diverse machining.

    ab
    54.40€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Nick, Regular Flute

    Alpha Nick, Regular Flute

    SANKO MFG

    Standard pitch type roughing end-mill. Regular flute length for diverse machining.

    ab
    40.51€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Nick, Hard Type Long Shank

    Alpha Nick, Hard Type Long Shank

    SANKO MFG

    As the cutter alone can be replaced, it is extremely economical. Suitable for heavy cutting and grooving. Long shank allows machining of deep areas.

    ab
    77.50€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX Roughing End Mill Regular Length Short SGFRERS

    SG-FAX Roughing End Mill Regular Length Short SGFRERS

    NACHI(FUJIKOSHI)

    Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

    ab
    56.63€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM, Medium Fine Pitch Type, VP-RENF

    XPM, Medium Fine Pitch Type, VP-RENF

    OSG

    V coating applied powder high speed XPM roughing medium blade series. Effective on difficult-to-machine materials.

    • Mengenrabatt
    ab
    61.18€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • XPM, Deep-Carving Short Fine-Pitch Type, VP-DE-RESF

    XPM, Deep-Carving Short Fine-Pitch Type, VP-DE-RESF

    OSG

    Long Shank Shaped End Mill For Deep Engraving

    ab
    113.92€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Tuf Nick Medium Type TFN

    Tuf Nick Medium Type TFN

    OSG

    Series for high speed steel roughing, semi-finishing.

    • Mengenrabatt
    ab
    31.14€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • WXL Coated End Mill (Roughing Medium Type) WH-REEN

    WXL Coated End Mill (Roughing Medium Type) WH-REEN

    OSG

    High-speed steel roughing end mills of next generation. For both dry and wet machining.

    • Mengenrabatt
    ab
    52.67€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Rough and Finish End Mills (Long Shank Short Type) LS-RFES

    Rough and Finish End Mills (Long Shank Short Type) LS-RFES

    OSG

    Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.

    • Mengenrabatt
    ab
    45.76€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TIN Coated End Mill (Roughing Long Fine-Pitch Type), EX-TIN-RELF

    TIN Coated End Mill (Roughing Long Fine-Pitch Type), EX-TIN-RELF

    OSG

    High speed steel roughing, extra long.

    • Mengenrabatt
    ab
    72.70€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • TIN Coated End Mill (Roughing Long Shank Fine Pitch Short Type) TIN-LS-RESF

    TIN Coated End Mill (Roughing Long Shank Fine Pitch Short Type) TIN-LS-RESF

    OSG

    Roughing end-mill with TICN coating. Flute with excellent chip control.

    • Mengenrabatt
    ab
    45.46€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • WXL Coated End Mill (Roughing Long Type), WH-REEL

    WXL Coated End Mill (Roughing Long Type), WH-REEL

    OSG

    High-speed steel roughing end mills of next generation. For both dry and wet machining.

    • Mengenrabatt
    ab
    72.70€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • P Coated X Alpha Nick Regular Blade

    P Coated X Alpha Nick Regular Blade

    SANKO MFG

    Semi fine-pitched roughing end mills. Quickly lift swarf out of the drill hole. Standard type edges cover a wide range of machining.

    ab
    48.86€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated S Tech Alpha Nick Long Shank

    S Coated S Tech Alpha Nick Long Shank

    SANKO MFG

    Semi-fine pitch type roughing end-mill with TICN coating. Can perform machining of hard-to-cut materials and extended continuous machining. Long shank allows machining of deep areas.

    ab
    90.83€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Alpha Nick Short Blade

    S Coated Alpha Nick Short Blade

    SANKO MFG

    Standard pitch type roughing end-mill with TICN coating.

    ab
    43.51€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • S Coated Alpha Nick Regular Blade

    S Coated Alpha Nick Regular Blade

    SANKO MFG

    Standard pitch type roughing end-mill with TICN coating. Regular flute length for diverse machining.

    ab
    66.70€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Nick, Hard Type Regular Flute

    Alpha Nick, Hard Type Regular Flute

    SANKO MFG

    As the cutter alone can be replaced, it is extremely economical. Suitable for heavy cutting and grooving. Regular flute length for diverse machining.

    ab
    27.98€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • For Stainless Steel Grooving

    For Stainless Steel Grooving

    SANKO MFG

    Flat nick type roughing end-mill. Suitable for stainless steel grooving.

    ab
    25.32€
    Minimum Lieferzeit
    4 Arbeitstage

    *Stückpreis Standardkonfiguration

  • Alpha Flat Nick Regular Flute

    Alpha Flat Nick Regular Flute

    SANKO MFG

    Flat nick type roughing end-mill. Can perform semi-finishing. Regular flute length for diverse machining.

    ab
    97.83€
    Minimum Lieferzeit
    3 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX Roughing End Mill Long Shank SLX Model SGFREU

    SG-FAX Roughing End Mill Long Shank SLX Model SGFREU

    NACHI(FUJIKOSHI)

    Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

    ab
    135.76€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

  • SG-FAX Roughing End Mill Long Shank SX Model SGFREX

    SG-FAX Roughing End Mill Long Shank SX Model SGFREX

    NACHI(FUJIKOSHI)

    Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.

    ab
    128.43€
    Minimum Lieferzeit
    5 Arbeitstage

    *Stückpreis Standardkonfiguration

Konfigurieren

Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

  • Flute Diameter (D)(φ)

    • 0.4~0.9
      • 0.4
      • 0.6
      • 0.7
      • 0.8
      • 0.9
    • 1~1.9
      • 1
      • 1/2
      • 1.1
      • 1.2
      • 1.3
      • 1.4
      • 1.5
      • 1.59
      • 1.6
      • 1.7
      • 1.8
      • 1.9
    • 2~2.9
      • 2
      • 2.1
      • 2.2
      • 2.3
      • 2.38
      • 2.4
      • 2.5
      • 2.6
      • 2.7
      • 2.8
      • 2.9
    • 3~3.97
      • 3
      • 3/4
      • 3.1
      • 3.18
      • 3.2
      • 3.3
      • 3.4
      • 3.5
      • 3.6
      • 3.7
      • 3.8
      • 3.9
      • 3.97
    • 4~4.9
      • 4
      • 4.1
      • 4.2
      • 4.3
      • 4.4
      • 4.5
      • 4.6
      • 4.7
      • 4.75
      • 4.8
      • 4.9
    • 5~5.9
      • 5
      • 5/8
      • 5.1
      • 5.2
      • 5.3
      • 5.4
      • 5.5
      • 5.56
      • 5.6
      • 5.7
      • 5.8
      • 5.9
    • 6~6.9
      • 6
      • 6.1
      • 6.2
      • 6.3
      • 6.35
      • 6.4
      • 6.5
      • 6.6
      • 6.7
      • 6.8
      • 6.9
    • 7~7.94
      • 7
      • 7/8
      • 7.1
      • 7.2
      • 7.3
      • 7.4
      • 7.5
      • 7.6
      • 7.7
      • 7.8
      • 7.9
      • 7.94
    • 8~8.9
      • 8
      • 8.1
      • 8.2
      • 8.3
      • 8.4
      • 8.5
      • 8.6
      • 8.7
      • 8.8
      • 8.9
    • 9~9.9
      • 9
      • 9.1
      • 9.2
      • 9.3
      • 9.4
      • 9.5
      • 9.53
      • 9.6
      • 9.7
      • 9.8
      • 9.9
    • 10~10.9
      • 10
      • 10.1
      • 10.2
      • 10.3
      • 10.4
      • 10.5
      • 10.6
      • 10.7
      • 10.8
      • 10.9
    • 11~11.9
      • 11
      • 11.1
      • 11.11
      • 11.2
      • 11.3
      • 11.4
      • 11.5
      • 11.6
      • 11.7
      • 11.8
      • 11.9
    • 12~12.9
      • 12
      • 12.1
      • 12.2
      • 12.3
      • 12.4
      • 12.5
      • 12.6
      • 12.7
      • 12.8
      • 12.9
    • 13~13.9
      • 13
      • 13.1
      • 13.2
      • 13.3
      • 13.4
      • 13.5
      • 13.6
      • 13.7
      • 13.8
      • 13.9
    • 14~14.9
      • 14
      • 14.1
      • 14.2
      • 14.29
      • 14.3
      • 14.4
      • 14.5
      • 14.6
      • 14.7
      • 14.8
      • 14.9
    • 15~15.9
      • 15
      • 15.1
      • 15.2
      • 15.3
      • 15.4
      • 15.5
      • 15.6
      • 15.7
      • 15.8
      • 15.88
      • 15.9
    • 16~16.9
      • 16
      • 16.1
      • 16.2
      • 16.3
      • 16.4
      • 16.5
      • 16.6
      • 16.7
      • 16.8
      • 16.9
    • 17~17.9
      • 17
      • 17.1
      • 17.2
      • 17.3
      • 17.4
      • 17.46
      • 17.5
      • 17.6
      • 17.7
      • 17.8
      • 17.9
    • 18~18.9
      • 18
      • 18.1
      • 18.2
      • 18.3
      • 18.4
      • 18.5
      • 18.6
      • 18.7
      • 18.8
      • 18.9
    • 19~19.9
      • 19
      • 19.05
      • 19.1
      • 19.2
      • 19.3
      • 19.4
      • 19.5
      • 19.6
      • 19.7
      • 19.8
      • 19.9
    • 20~20.9
      • 20
      • 20.1
      • 20.2
      • 20.3
      • 20.4
      • 20.5
      • 20.6
      • 20.64
      • 20.7
      • 20.8
      • 20.9
    • 21~21.9
      • 21
      • 21.1
      • 21.2
      • 21.3
      • 21.4
      • 21.5
      • 21.6
      • 21.7
      • 21.8
      • 21.9
    • 22~22.9
      • 22
      • 22.1
      • 22.2
      • 22.23
      • 22.3
      • 22.4
      • 22.5
      • 22.6
      • 22.7
      • 22.8
      • 22.9
    • 23~23.9
      • 23
      • 23.1
      • 23.2
      • 23.3
      • 23.4
      • 23.5
      • 23.6
      • 23.7
      • 23.8
      • 23.81
      • 23.9
    • 24~24.9
      • 24
      • 24.1
      • 24.2
      • 24.3
      • 24.4
      • 24.5
      • 24.6
      • 24.7
      • 24.8
      • 24.9
    • 25~25.9
      • 25
      • 25.1
      • 25.2
      • 25.3
      • 25.4
      • 25.5
      • 25.6
      • 25.7
      • 25.8
      • 25.9
    • 26~26.9
      • 26
      • 26.1
      • 26.2
      • 26.3
      • 26.4
      • 26.5
      • 26.6
      • 26.7
      • 26.8
      • 26.9
    • 27~27.9
      • 27
      • 27.1
      • 27.2
      • 27.3
      • 27.4
      • 27.5
      • 27.6
      • 27.7
      • 27.8
      • 27.9
    • 28~28.9
      • 28
      • 28.1
      • 28.2
      • 28.3
      • 28.4
      • 28.5
      • 28.6
      • 28.7
      • 28.8
      • 28.9
    • 29~29.9
      • 29
      • 29.1
      • 29.2
      • 29.3
      • 29.4
      • 29.5
      • 29.6
      • 29.7
      • 29.8
      • 29.9
    • 30~30.9
      • 30
      • 30.1
      • 30.2
      • 30.3
      • 30.4
      • 30.5
      • 30.6
      • 30.7
      • 30.8
      • 30.9
    • 31~31.9
      • 31
      • 31.1
      • 31.2
      • 31.3
      • 31.4
      • 31.5
      • 31.6
      • 31.7
      • 31.75
      • 31.8
      • 31.9
    • 32~32.9
      • 32
      • 32.1
      • 32.2
      • 32.3
      • 32.4
      • 32.5
      • 32.6
      • 32.7
      • 32.8
      • 32.9
    • 33~33.9
      • 33
      • 33.1
      • 33.2
      • 33.3
      • 33.4
      • 33.5
      • 33.6
      • 33.7
      • 33.8
      • 33.9
    • 34~34.9
      • 34
      • 34.1
      • 34.2
      • 34.3
      • 34.4
      • 34.5
      • 34.6
      • 34.7
      • 34.8
      • 34.9
    • 35~35.9
      • 35
      • 35.1
      • 35.2
      • 35.3
      • 35.4
      • 35.5
      • 35.6
      • 35.7
      • 35.8
      • 35.9
    • 36~36.9
      • 36
      • 36.1
      • 36.2
      • 36.3
      • 36.4
      • 36.5
      • 36.6
      • 36.7
      • 36.8
      • 36.9
    • 37~37.9
      • 37
      • 37.1
      • 37.2
      • 37.3
      • 37.4
      • 37.5
      • 37.6
      • 37.7
      • 37.8
      • 37.9
    • 38~38.9
      • 38
      • 38.1
      • 38.2
      • 38.3
      • 38.4
      • 38.5
      • 38.6
      • 38.7
      • 38.8
      • 38.9
    • 39~39.9
      • 39
      • 39.1
      • 39.2
      • 39.3
      • 39.4
      • 39.5
      • 39.6
      • 39.7
      • 39.8
      • 39.9
    • 40~40.9
      • 40
      • 40.1
      • 40.2
      • 40.3
      • 40.4
      • 40.5
      • 40.6
      • 40.7
      • 40.8
      • 40.9
    • 41~41.9
      • 41
      • 41.1
      • 41.2
      • 41.3
      • 41.4
      • 41.5
      • 41.6
      • 41.7
      • 41.8
      • 41.9
    • 42~42.9
      • 42
      • 42.1
      • 42.2
      • 42.3
      • 42.4
      • 42.5
      • 42.6
      • 42.7
      • 42.8
      • 42.9
    • 43~43.9
      • 43
      • 43.1
      • 43.2
      • 43.3
      • 43.4
      • 43.5
      • 43.6
      • 43.7
      • 43.8
      • 43.9
    • 44~44.9
      • 44
      • 44.1
      • 44.2
      • 44.3
      • 44.4
      • 44.5
      • 44.6
      • 44.7
      • 44.8
      • 44.9
    • 45~45.5
      • 45
      • 45.5
    • 46~46.5
      • 46
      • 46.5
    • 47~47.5
      • 47
      • 47.5
    • 48~48.5
      • 48
      • 48.5
    • 49~49.5
      • 49
      • 49.5
    • 50~50.8
      • 50
      • 50.5
      • 50.8
    • 51
    • 52
    • 53
    • 54
    • 55
    • 56
    • 57
    • 58
    • 59
    • 60
    • 61
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 85
    • 90
    • 95
    • 100
    [2.7-3/0.01φ-Schritte] [3.15-3.5/0.01φ-Schritte] [3.6-4/0.01φ-Schritte] [4.05-16/0.01φ-Schritte] [5.01-7/0.01φ-Schritte] [7.01-7.5/0.01φ-Schritte] [7.51-12/0.01φ-Schritte] [12.01-14.99/0.01φ-Schritte] [15.01-16/0.01φ-Schritte] [17-19.99/0.01φ-Schritte] [19.01-19.99/0.01φ-Schritte] [20.01-22.99/0.01φ-Schritte] [22.01-22.99/0.01φ-Schritte] [24-25/0.01φ-Schritte]
  • Flute Length (ℓ)(mm)

    • 0.8
    • 1.1
    • 1.4
    • 1.5
    • 1.6
    • 1.8
    • 2
    • 2.2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 10.5
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20
    • 22
    • 24
    • 25
    • 26
    • 28
    • 30
    • 32
    • 33
    • 34
    • 35
    • 36
    • 38
    • 39
    • 40
    • 45
    • 48
    • 50
    • 53
    • 55
    • 56
    • 58
    • 60
    • 63
    • 65
    • 67
    • 68
    • 70
    • 75
    • 80
    • 85
    • 90
    • 95
    • 100
    • 105
    • 106
    • 110
    • 112
    • 115
    • 120
    • 122
    • 125
    • 130
    • 145
    • 150
    • 155
    • 160
    • 180
    • 200
    • 205
    • 212
    • 250
    • 255
    • 300
  • Work Material

  • Flute Shape Type

  • Number of Flutes(Pieces)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
  • Tool Material Type

  • Processing Applications

  • Link Diameter (d)(mm)

    • 5
    • BS5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 15
    • 16
    • 19
    • 20
    • 24
    • 25
    • 32
    • 42
    • 50.8
  • Coating

  • Overall Length (L)(mm)

    • 42~48
      • 42
      • 45
      • 48
    • 50~59
      • 50
      • 51
      • 52
      • 53
      • 54
      • 55
      • 56
      • 57
      • 58
      • 59
    • 60~69
      • 60
      • 62
      • 63
      • 64
      • 65
      • 66
      • 67
      • 68
      • 69
    • 70~79
      • 70
      • 72
      • 73
      • 74
      • 75
      • 76
      • 77
      • 78
      • 79
    • 80~89
      • 80
      • 82
      • 83
      • 84
      • 85
      • 86
      • 88
      • 89
    • 90~97
      • 90
      • 91
      • 92
      • 95
      • 97
    • 100~108
      • 100
      • 101
      • 102
      • 104
      • 105
      • 108
    • 110~119
      • 110
      • 115
      • 116
      • 119
    • 120~127
      • 120
      • 121
      • 122
      • 123
      • 124
      • 125
      • 127
    • 130~137
      • 130
      • 132
      • 133
      • 134
      • 135
      • 137
    • 140~149
      • 140
      • 141
      • 142
      • 143
      • 144
      • 145
      • 147
      • 149
    • 150~155
      • 150
      • 154
      • 155
    • 160~169
      • 160
      • 162
      • 165
      • 166
      • 169
    • 170~178
      • 170
      • 173
      • 175
      • 177
      • 178
    • 180~189
      • 180
      • 182
      • 183
      • 184
      • 185
      • 186
      • 188
      • 189
    • 190~198
      • 190
      • 191
      • 193
      • 195
      • 197
      • 198
    • 200~208
      • 200
      • 202
      • 203
      • 205
      • 208
    • 210~215
      • 210
      • 213
      • 214
      • 215
    • 220~227
      • 220
      • 222
      • 224
      • 225
      • 227
    • 230~235.5
      • 230
      • 233
      • 235
      • 235.5
    • 240~245.5
      • 240
      • 245
      • 245.5
    • 250~255
      • 250
      • 250.5
      • 252
      • 253
      • 255
    • 260~265
      • 260
      • 265
    • 270~275
      • 270
      • 275
    • 280~288
      • 280
      • 283
      • 285
      • 288
    • 290~295
      • 290
      • 295
    • 300~305
      • 300
      • 305
    • 310~315
      • 310
      • 315
    • 320
    • 340~345
      • 340
      • 345
    • 350~355
      • 350
      • 355
    • 370
    • 395
    • 400
    • 420
  • Torsion Angle (θ)

  • Base-Blade Availability

  • Length Under Neck (ℓ1)(mm)

    • 10
    • 12
    • 14
    • 17
    • 22
    • 23
    • 27
    • 28
    • 29
    • 37
    • 38
    • 40
    • 44
    • 45
    • 46
    • 48
    • 49
    • 53
    • 54
    • 56
    • 57
    • 58
    • 60
    • 62
    • 64
    • 65
    • 66
    • 70
    • 72
    • 75
    • 80
    • 88
    • 90
    • 95
    • 100
    • 112
    • 113
    • 115
  • Link

Suchergebnisse durch Herstellerauswahl einschränken

Warenzeichen

MISUMI Artikel
  • Kostengünstige Artikel
MISUMI Geschäftsbereich für Produkte für den öffentlichen Gebrauch

Suchergebnisse durch Auswahl des CAD-Formats einschränken

Bild auswählen

Schließen