• Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.

Hartmetall-Rechteckschaftfräser(Machining Application:Inclined Cuts)

Suche durch Präzisierung der Kategorie der unteren Klasse

Daten, die angezeigt werden sollen
30
45
60
Sortieren nach:
Lieferzeit
  • Alle Produkte
  • Versand am selben Tag
  • 3 Tag oder weniger
  • 4 Tag oder weniger
  • 5 Tag oder weniger
  • 6 Tag oder weniger
  • 7 Tag oder weniger
  • 8 Tag oder weniger
  • 10 Tag oder weniger
  • 11 Tag oder weniger
  • 12 Tag oder weniger
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Spezifikationen
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)
  • Empfehlung

XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model

  • Empfehlung

XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model

    XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

      2-schneidig, langer Hals, kurze Ausführung (tiefe Rippenausführung) WXL-LN-EDS

        MHRH230 2-schneidiger Langhals-Schaftfräser für hohe Härte

          MSZ345-MUGEN-BESCHICHTUNG-POWER „Z“-Schaftfräser

            XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

              XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

                XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

                  2-schneidig kurze Ausführung MG-EDS

                    AL-3LS-Langschaftfräser für Aluminium (Unter-Schaft)

                      ALZ345-Schwerschnitt-Schaftfräser für Aluminium, hocheffizient

                        MUGEN-BESCHICHTUNG, 2-schneidiger Schaftfräser MSE230

                          TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

                            TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

                              TSC Series Carbide Long Neck Square End Mill for High-Hardness Steel Machining, 4-Flute, 50° Spiral / Long Model

                                DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

                                  Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

                                    XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

                                      GSX-FRÄSER, 3-schneidiges Messer 1.5D GSX3C-1.5D

                                        GS MILL langer Hals, 2-schneidig GSN2

                                          2-schneidig, 2D-Ausführung WXL-2D-DE

                                            2-schneidig, kurze Ausführung DIA-EDS

                                              2-schneidig, kurze Ausführung für Kupfer/Aluminiumlegierung CA-RG-EDS

                                                4-schneidig, lange Ausführung MG-EML

                                                  Mehrfachrillen, kurz (hohe Festigkeit) FXS-EMS

                                                    HLS, HM-beschichtet 2-schneidig  langer Hals, quadratisch

                                                      SMEZ120 CBN-Mikro-Kante Z

                                                        AL2D-2-Nur-Aluminium-Schaftfräser (2x-Messer, Längenausführung)

                                                          MSE430P MUGEN-BESCHICHTUNG scharfkantiger 4-schneidiger Schaftfräser

                                                            MSX440 MUGEN-BESCHICHTUNG POWER Schaftfräser

                                                              MX435 MUGEN-BESCHICHTUNG 4-schneidiger Schaftfräser GEWINDE 35

                                                                DLC-AZS DLC-beschichtet, 3-schneidig mit langem Hals quadratisch

                                                                  DIA-HBC4 Hartmetall-Schaftfräser, Fräse-Serie für CFRP, Fischgrätmuster-Ausführung (4 Bodenschneiden)

                                                                    GESCHWINDIGKEIT/T 3-schneidig zum Schruppen von Aluminium

                                                                      WATERMILLS ® Schaftfräser hoher Bearbeitungseffizienz WHS645 Vierkant-Schaftfräser, 6-schneidig, Steilspiral AlTiN-Beschichtung

                                                                        XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

                                                                          XAL series carbide square end mill, 2-flute / 3D Flute Length model

                                                                            XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

                                                                              XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

                                                                                XAC series carbide square end mill, 2-flute / short model

                                                                                  XAC series carbide square end mill, 4-flute / short model

                                                                                    XAC series carbide square end mill, 4-flute / long model

                                                                                      TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

                                                                                        TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

                                                                                        Warenzeichen

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        OSG

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        OSG

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        NACHI(FUJIKOSHI)

                                                                                        NACHI(FUJIKOSHI)

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        UNION TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        UNION TOOL

                                                                                        OSG

                                                                                        SPEED TIGER

                                                                                        WATERMILLS

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        Artikelserie

                                                                                        XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model

                                                                                        XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model

                                                                                        XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

                                                                                        2-schneidig, langer Hals, kurze Ausführung (tiefe Rippenausführung) WXL-LN-EDS

                                                                                        MHRH230 2-schneidiger Langhals-Schaftfräser für hohe Härte

                                                                                        MSZ345-MUGEN-BESCHICHTUNG-POWER „Z“-Schaftfräser

                                                                                        XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

                                                                                        XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

                                                                                        XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

                                                                                        2-schneidig kurze Ausführung MG-EDS

                                                                                        AL-3LS-Langschaftfräser für Aluminium (Unter-Schaft)

                                                                                        ALZ345-Schwerschnitt-Schaftfräser für Aluminium, hocheffizient

                                                                                        MUGEN-BESCHICHTUNG, 2-schneidiger Schaftfräser MSE230

                                                                                        TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

                                                                                        TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

                                                                                        TSC Series Carbide Long Neck Square End Mill for High-Hardness Steel Machining, 4-Flute, 50° Spiral / Long Model

                                                                                        DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

                                                                                        Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

                                                                                        XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

                                                                                        GSX-FRÄSER, 3-schneidiges Messer 1.5D GSX3C-1.5D

                                                                                        GS MILL langer Hals, 2-schneidig GSN2

                                                                                        2-schneidig, 2D-Ausführung WXL-2D-DE

                                                                                        2-schneidig, kurze Ausführung DIA-EDS

                                                                                        2-schneidig, kurze Ausführung für Kupfer/Aluminiumlegierung CA-RG-EDS

                                                                                        4-schneidig, lange Ausführung MG-EML

                                                                                        Mehrfachrillen, kurz (hohe Festigkeit) FXS-EMS

                                                                                        HLS, HM-beschichtet 2-schneidig langer Hals, quadratisch

                                                                                        SMEZ120 CBN-Mikro-Kante Z

                                                                                        AL2D-2-Nur-Aluminium-Schaftfräser (2x-Messer, Längenausführung)

                                                                                        MSE430P MUGEN-BESCHICHTUNG scharfkantiger 4-schneidiger Schaftfräser

                                                                                        MSX440 MUGEN-BESCHICHTUNG POWER Schaftfräser

                                                                                        MX435 MUGEN-BESCHICHTUNG 4-schneidiger Schaftfräser GEWINDE 35

                                                                                        DLC-AZS DLC-beschichtet, 3-schneidig mit langem Hals quadratisch

                                                                                        DIA-HBC4 Hartmetall-Schaftfräser, Fräse-Serie für CFRP, Fischgrätmuster-Ausführung (4 Bodenschneiden)

                                                                                        GESCHWINDIGKEIT/T 3-schneidig zum Schruppen von Aluminium

                                                                                        WATERMILLS ® Schaftfräser hoher Bearbeitungseffizienz WHS645 Vierkant-Schaftfräser, 6-schneidig, Steilspiral AlTiN-Beschichtung

                                                                                        XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

                                                                                        XAL series carbide square end mill, 2-flute / 3D Flute Length model

                                                                                        XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

                                                                                        XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

                                                                                        XAC series carbide square end mill, 2-flute / short model

                                                                                        XAC series carbide square end mill, 4-flute / short model

                                                                                        XAC series carbide square end mill, 4-flute / long model

                                                                                        TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

                                                                                        TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

                                                                                        ab

                                                                                        11.09 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        14.79 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        6.79 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        22.54 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        24.53 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        42.38 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        18.28 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        18.60 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        21.87 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        35.95 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        67.76 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        36.15 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        15.38 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        53.63 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        31.41 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        6.53 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        22.88 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        30.33 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        23.10 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        92.08 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        47.90 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        58.86 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        76.59 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        48.05 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        176.72 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        22.31 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        27.30 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        45.15 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        22.45 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        55.36 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        98.04 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        49.03 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        42.37 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        17.85 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        6.96 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        7.72 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        7.70 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        9.55 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        10.47 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        19.22 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        Minimum Lieferzeit 3 Arbeitstage 3 Arbeitstage Versand am selben Tag Versand am selben Tag Versand am selben Tag 4 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage Versand am selben Tag 4 Arbeitstage 5 Arbeitstage 5 Arbeitstage 3 Arbeitstage Versand am selben Tag 3 Arbeitstage Versand am selben Tag 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage
                                                                                        Spezifikationen
                                                                                            • XAL
                                                                                            • General Steel
                                                                                            • 2 Flutes
                                                                                                  • XAL
                                                                                                  • General Steel
                                                                                                  • 4 Flutes
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 3 Flutes
                                                                                                              • S (Short)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • L (Long)
                                                                                                              • TS
                                                                                                              • High-Hardness Steel
                                                                                                              • 4 Flutes
                                                                                                              • DLC
                                                                                                              • Aluminum
                                                                                                              • 3 Flutes
                                                                                                              • R (Regular)
                                                                                                              • Non-Coated
                                                                                                              • Resin
                                                                                                              • 2 Flutes
                                                                                                              • R (Regular)
                                                                                                              • XAL
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                                                                • XAL
                                                                                                                                                • General Steel
                                                                                                                                                • 3 Flutes
                                                                                                                                                • XAL
                                                                                                                                                • General Steel
                                                                                                                                                • 2 Flutes
                                                                                                                                                • XAL
                                                                                                                                                • General Steel
                                                                                                                                                • 4 Flutes
                                                                                                                                                • XAL
                                                                                                                                                • General Steel
                                                                                                                                                • 4 Flutes
                                                                                                                                                • TiAlN
                                                                                                                                                • General Steel
                                                                                                                                                • 2 Flutes
                                                                                                                                                • S (Short)
                                                                                                                                                • TiAlN
                                                                                                                                                • General Steel
                                                                                                                                                • 4 Flutes
                                                                                                                                                • S (Short)
                                                                                                                                                • TiAlN
                                                                                                                                                • General Steel
                                                                                                                                                • 4 Flutes
                                                                                                                                                • L (Long)
                                                                                                                                                • TS
                                                                                                                                                • General Steel
                                                                                                                                                • 3 Flutes
                                                                                                                                                • B (Stub)
                                                                                                                                                • TS
                                                                                                                                                • General Steel
                                                                                                                                                • 3 Flutes
                                                                                                                                                • S (Short)
                                                                                                                                                Blade diameter (D)(φ)0.1 ~ 61 ~ 60.1 ~ 200.2 ~ 50.1 ~ 31 ~ 122 ~ 201 ~ 121 ~ 121 ~ 255 ~ 121 ~ 120.1 ~ 122 ~ 206 ~ 201.5 ~ 55 ~ 201 ~ 100.5 ~ 201 ~ 200.2 ~ 60.1 ~ 200.5 ~ 121 ~ 203 ~ 251 ~ 300.1 ~ 60.03 ~ 0.10.5 ~ 121 ~ 123 ~ 201 ~ 121 ~ 126 ~ 106 ~ 124 ~ 201 ~ 120.1 ~ 201 ~ 201 ~ 201 ~ 202 ~ 203 ~ 121 ~ 121 ~ 20
                                                                                                                                                work materialgeneral steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎]Aluminum[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]Aluminum[◎] / Copper[◎] / Resin[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]Aluminum[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]Aluminum[◎] / Copper[○] / Resin[○]-Aluminum[○] / Copper[○]-general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                                                                                                Blade length (ℓ)(mm)0.2 ~ 91.5 ~ 90.2 ~ 400.3 ~ 7.50.08 ~ 4.51.5 ~ 265 ~ 384 ~ 485 ~ 602.5 ~ 457.5 ~ 181.5 ~ 180.15 ~ 303.5 ~ 3025 ~ 652.3 ~ 1015 ~ 453 ~ 200.75 ~ 301.5 ~ 300.3 ~ 90.2 ~ 401 ~ 262.5 ~ 3812 ~ 673.5 ~ 550.1 ~ 90.03 ~ 0.11 ~ 242.5 ~ 308 ~ 383 ~ 362 ~ 2415 ~ 2515 ~ 3011 ~ 451.5 ~ 260.3 ~ 602 ~ 403 ~ 602.5 ~ 386 ~ 3812 ~ 301.5 ~ 183 ~ 38
                                                                                                                                                Number of flutes(sheet)242223444233233 ~ 443223222244 ~ 82124443436324424433
                                                                                                                                                TypeLong-Neck SquareLong-Neck SquareSquareLong-Neck SquareLong-Neck SquareSquareSquareSquareSquareSquareSquareSquareSquareSquareRoughingLong-Neck SquareRoughingSquareSquareSquareLong-Neck SquareSquareSquareSquareSquareSquareLong-Neck SquareSquareSquareSquareSquareSquareLong-Neck SquareRoughingRoughingHigh HelicalSquareSquareSquareSquareSquareSquareSquareSquareSquare
                                                                                                                                                CoatingFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)TiAlNFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)Non-CoatedNon-CoatedNon-CoatedTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)DLCNon-CoatedFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)TiAlNFor General Steels (AlCrN, etc.)Dia CoatNon-CoatedNon-CoatedTiAlNFor High Hardness (Silicon Group)Non-CoatedNon-CoatedTiAlNTiAlNTiAlNDLCDia Coat--For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)TiAlNTiAlNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)
                                                                                                                                                Shank diameter (d)(mm)4 ~ 64 ~ 63 ~ 204 ~ 64 ~ 64 ~ 124 ~ 204 ~ 124 ~ 124 ~ 254 ~ 104 ~ 124 ~ 126 ~ 206 ~ 2066 ~ 201 ~ 104 ~ 204 ~ 204 ~ 64 ~ 204 ~ 124 ~ 206 ~ 256 ~ 324 ~ 644 ~ 124 ~ 126 ~ 204 ~ 124 ~ 126 ~ 106 ~ 124 ~ 204 ~ 123 ~ 204 ~ 204 ~ 204 ~ 204 ~ 206 ~ 126 ~ 124 ~ 20
                                                                                                                                                Overall Length (L)(mm)50 ~ 10050 ~ 10040 ~ 11045 ~ 12045 ~ 10045 ~ 8045 ~ 12545 ~ 10545 ~ 10540 ~ 12080 ~ 15045 ~ 8045 ~ 8080 ~ 200100 ~ 15060 ~ 10057 ~ 10065 ~ 18040 ~ 11040 ~ 10045 ~ 12045 ~ 10040 ~ 7540 ~ 10550 ~ 14060 ~ 14045 ~ 1205045 ~ 8045 ~ 8055 ~ 10545 ~ 8060 ~ 11065 ~ 7550 ~ 7550 ~ 10045 ~ 10040 ~ 11040 ~ 11045 ~ 13040 ~ 10540 ~ 10550 ~ 9060 ~ 10060 ~ 110
                                                                                                                                                Underneck length (ℓ1)(mm)0.3 ~ 604 ~ 50-0.5 ~ 600.3 ~ 50------3 ~ 36-30 ~ 14030 ~ 1126 ~ 5020 ~ 70---0.5 ~ 60-----0.3 ~ 60-----3 ~ 36----------14 ~ 6818 ~ 73
                                                                                                                                                Machining ApplicationInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined CutsInclined Cuts
                                                                                                                                                Blade tip shapeSharp Edge / With LeadSharp Edge / With LeadSharp Edge / With LeadWith LeadWith LeadWith LeadWith LeadWith LeadWith LeadSharp Edge / With LeadWith LeadWith LeadWith LeadWith LeadC planeMicro RMicro RSharp EdgeSharp Edge / With LeadWith LeadSharp EdgeSharp EdgeWith LeadWith LeadSharp Edge / With LeadWith LeadWith LeadSharp EdgeSharp EdgeSharp EdgeMicro RWith LeadWith LeadWith Lead--With LeadSharp Edge / With LeadSharp Edge / With LeadSharp Edge / With LeadSharp EdgeSharp EdgeSharp EdgeWith LeadSharp Edge / With Lead
                                                                                                                                                Torsion Angle (θ)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Weak torsion (15 to 25˚)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)

                                                                                                                                                Loading...

                                                                                                                                                Kategorien beziehen sich auf Hartmetall-Rechteckschaftfräser